Short Dump - EXSORT_NOT_ENOUGH_MEMORY in ACT_UPG
Hello Experts,
I am in the process of Upgrading ECC6 EHP3 to EHP4.
Upgrade is stalled in phase ACT_UPG phase for last almost 24 hours now.
I posted a thread about that
[EHP4 upgrade stucl in MAIN_SHDRUN/ACT_UPG;
Now my phase got an error EXSORT_NOT_ENOUGH_MEMORY .
How can I approach this problem?
I already changed the parameters as per note 1387739.
My physical memeory is 12G
Can anyone seen this problem during ehp4 uPGRADE.
Other than above I don't see any other short dumps in Shadow instance.
Please suggest.
Thanks for your time.
Regards,
M
Hi Sunny,
Thanks for your reply. Yes I increased non-dia/total abap heap area and roll area as suggested by note
1387739 to
abap/heap_area_total = 5000000000
abap/heap_area_nondia = 5000000000
ztta/roll_area = 10000000
I have restarted the phase where it stopped. It's currently running now. Wil update the forum as I see any results.
Also I increased swap file of the system to 22G. Eralier it was 10G.
Thanks,
M
Similar Messages
-
Short dump "EXSORT_NOT_Enough_MEMORY" in production system
Hi,
"EXSORT_NOT_Enough_MEMORY" dump occuring in production system,Could any one please tell me how to fix this dump.
Please refer the error message below
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "RSBPCOLL" had to be terminated because the ABAP
processor discovered an invalid system state.
Error analysis:
The current ABAP/4 program was meant to sort a dataset (internal table
or extract). For reasons of capacity, this was not possible due to
insufficient main storage space. Therefore, the
external sort was called and resulted in the following error:
the following error:
SAP runtime system internal error.
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server cambsvr15_PEC_00 on host cambsvr15 (wp 12)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1886
and i see that background job "SAP_COLLECTOR_FOR_JOBSTATISTIC" job being failed with below error.
Job started
Step 001 started (program RSBPCOLL, variant , user ID BACKGROUND)
ABAP/4 processor: EXSORT_NOT_ENOUGH_MEMORY
Job cancelled
Please help me to correct this error.
Best Regards,
VinodHi Bhaskar,
yes, I have checked the Wp status and it looks fine.I'm getting this error on My PRD system on regular basis since 1 week.
We have tried to restart the server but no luck.
Here are the ST02 values and background job SAP_COLLECTOR_FOR_JOBSTATISTIC also being failed with this error.
Buffer Hitratio Allocated Free space Dir. size Free directory Swaps
[%] [kB] [kB] [%] Entries Entries [%]
Program 99.11 400,000 1,481 0.38 100,000 90,774 90.77 36,307
CUA 99.31 3,000 264 10.53 1,500 1,263 84.20 14,934
Screen 98.45 4,297 27 0.82 10,000 9,653 96.53 645
Calendar 99.76 488 359 75.10 200 48 24.00 0
OTR 100.00 4,096 3,439 100.00 2,000 2,000 100.00 0
SAP memory Current use Max. use In memory On disk
[%] [kB] [kB] [kB] [kB]
Roll area 1.45 3,808 7,680 262,144 0
Paging area 3.40 8,904 13,056 0 262,144
Extended Memory 9.05 389,120 812,032 4,299,776
Swaps
0
21,249
0
16,399
36,307
14,934
645
0
0
272
0
210,742
0
Please let me know if you require further information.
Thanks & Regards,
Vinod -
Short DUMP: EXSORT_NOT_ENOUGH_MEMORY
Hello everyone,
Our user is running some reports using Transaction IQ09-
Display Material Serial Number List, and its going to the dump
by giving error message as "STORAGE_PARAMETERS_WRONG_SET"
or "TSV_TNEW_PAGE_ALLOC_FAILED" or EXSORT_NOT_ENOUGH_MEMORY.
We have tried to execute this transaction in background mode
and still getting the same dump/error message. We are getting
this error in our Production R/3 system (PU1) and it is
affecting business operations.
"In the what you can do" section in DUMP log, this is what I find:
Set the system profile parameters
- abap/heap_area_dia
- abap/heap_area_nondia
to a maximum of 687977744. Then reduce the value by 10.000.000 to be on the
safe side.
Then restart the SAP System.
Our system is 32-bit SAP kernel and what these DUMPs means is additional memory is required to extend the internal table, but none is available. This error is usually due to a lack of system resources for the roll area where internal tables are processed.
Below are the profile parameters we have set in our PRD system.
ztta/roll_first 1024
ztta/roll_area 2000896
abap/heap_area_dia 2000683008
abap/heap_area_nondia 2000683008
abap/heap_area_total 2000683008
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2000683008
em/initial_size_MB 5765
em/blocksize_KB 1024
Do I need to change any of the above profile parameters in RZ10 to get rid of the dump? Do you think this will have any adverse effect on our production system such are system may run out of shared memory.
Any help will be greately appreciated and points will be rewarded.
Thanks,
Shahid AnjumHi Shahid,
To understand how the system performs sorting and the EXSORT_NOT_ENOUGH_MEMORY error, see SAP Note 193529 Sort as of 4.5A/EXSORT_NOT_ENOUGH_MEMORY.
The error TSV_NEW_PAGE_ALLOC_FAILED means that more memory was requested because the program needed to expand an internal table, but the memory was not available.
When Extended Memory is used up, the process will go into PRIV mode as it starts using Heap Memory (or vise-versa). No other user will be able to use this wp while it is in PRIV mode. If there is enough heap for it to finish, you will not see the error TSV_NEW_PAGE_ALLOC_FAILED and the wp will be freed.
You should check your settings for the profile parameters abap/heap_area_total and abap/heap_area_nondia against the Notes:
146289 Parameter Recommendations for 64-Bit SAP Kernel
425207 SAP memory management, current parameter ranges
Also, see the Notes:
20527 Runtime error TSV_TNEW_PAGE_ALLOC_FAILED
217262 Runtime error text for TSV_TNEW_PAGE_ALLOC_FAILED
185185 Application: Analysis of memory bottlenecks
649327 Analysis of memory consumption
However, often the problem may not be with memory settings, but with the selection values the user is entering for the report. That is, they may be entering a very wide range against a very large table. In these cases, check the selection values and reduce them. Also, check the affected table size and consider if parts of it may be archived.
Best Regards,
Matt -
I am investigating a performance problem with a SAP standard report. It falls over when trying to sort a table, the table size is [194994x294]. In know this is large but is it common for it to cause a EXSORT_NOT_ENOUGH_MEMORY short dump?
Hi,
Go to my computer and right click on it....
and go to properties.....
then go to advanced tab...
in it go to performance settings...
then go to advanced tab
in that go to virtual memory....in it click on change...
in change click on the radio button 'system managed size'
click on set and save it...
it might help you...
Regards
Debarshi -
Short dump 'Table does not exist in database'
Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num = :p_matnr and
model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
Table does not exist in database.
What happened?
The table or view name used does not
exist in the database.
The error occurred in the current database connection "DEFAULT".
What can you do?
Check the spelling of the table names in your report.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
caught in
procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions. -
Short Dump while scrolling in a maintenance view
A maintenance view has one field, defined as "Radiobutton".
1) Select the radiobutton for one entry.
2) Scroll down so that in the new page (i.e. the entries displayed in the new page) the entry selected in the first step is not visible.
3) Select any radiobutton again corresponding to any of the entries displayed in the new page.
4) On scrolling up again the short dump occurs.
The short dump text says "More than one radio button is active".
Any inputs in this regards are appreciated.
Thanks.
Gajendra.Hi,
that means you are trying to make two radio buttons active.
parameters: ra radiobutton group g1 default = 'X',
rb radiobutton group g1.
ra = 'X'.
and rb = 'X'.
in your case so obviously it will dump.
check your coding..
and show your code...
Regards
vijay -
SHORT DUMP WHILE EXECUTING DTP.
Hi Gurus,
I have got a short dump while executing DTP the Error is as Follows.
Runtime Error: MESSAGE_TYPE_X.
Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
2.There is a error in the application program
And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
But i have no much time and i have to someway or the other execute the DTP and load the data.
Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
Regards
Amar.Hi Amar,
If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
Thanks..
Shambhu -
Custom error message in user exit is giving Short dump
Hi All,
We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
lc_zin TYPE vbak-auart VALUE u2018ZINu2019,
lc_zir TYPE vbak-auart VALUE u2018ZIRu2019,
lc_text(32) TYPE c VALUE u2018Check long text for more detailsu2019.
DATA: l_uname TYPE sy-uname.
CLEAR: l_uname.
MOVE sy-uname TO l_uname.
*If user ID is not the Web application ID then block the creation/Change/Deletion
IF l_uname NE lc_vbcpic01
AND ( vbak-auart EQ lc_zin
OR vbak-auart EQ lc_zir ).
MESSAGE e830(zv) WITH lc_text.
ENDIF.
This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
Error Analysis:
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
I am working on 4.6C version of SAP.
Note: When i issue information/Warning message contract is getting deleted after displaying the message.
Thanks,
Vinod.I exactly replicated the same in DELETE_DOCUMENT also
I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
it is also giving the dump.
copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
MODULE cancel INPUT.
MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
IF ok_code = 'CANCEL'.
CLEAR ok_code.
LEAVE PROGRAM.
ENDIF.
ENDMODULE.
and see... -
Short dump while creating a plant.
Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors RAISE_EXCEPTION
Date and Time 27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance = instance
17
IMPORTING
18
class_name = class_name
19
CHANGING
20
exit_name = exit_name
21
EXCEPTIONS
22
no_reference = 1
23
no_interface_reference = 2
24
no_exit_interface = 3
25
data_incons_in_exit_managem = 4
26
class_not_implement_interface = 5
27
OTHERS = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
43 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION SAPLXSZAR ZXSZARU01 25
EXIT_SAPLSZAR_001
41 FUNCTION SAPLSZAR LSZARU01 108
ADDR_REGIONAL_DATA_CHECK
40 FORM SAPLSZA2 LSZA2F20 382
CHECK_ADDR1_DATA
39 FUNCTION SAPLSZA2 LSZA2U02 42
ADDR_CHECK
38 FUNCTION SAPLSZA0 LSZA0U01 79
ADDR_INSERT
37 FORM SAPLSZA1 LSZA1F22 1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM SAPLSZA1 LSZA1F22 2234
PUT_ADDRESS_TO_MEMORY
35 FORM SAPLSZA1 LSZA1I02 409
D0100_OK_CODE
34 FORM SAPLSZA1 LSZA1F03 17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1 LSZA1I02 13
D0100_OK_CODE
32 FUNCTION SAPLSZA1 LSZA1U01 200
ADDR_DIALOG_INTERN
31 FUNCTION SAPLSZA1 LSZA1U05 177
ADDR_DIALOG
30 FORM SAPL0ORG LSVIMF24 292
ADDRESS_MAINTAIN
29 FORM SAPL0ORG LSVIMFX2 577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG LSVIMIXX 354
DETAIL_PAI
27 FORM SAPL0ORG LSVIMF2L 337
CALL_DYNPRO
26 FUNCTION SAPL0ORG L0ORGU34 35
VIEWPROC_V_T001W
25 FUNCTION SAPL0ORG L0ORGU33 49
VIEWFRAME_V_T001W
24 FUNCTION SAPLSVIM LSVIMU01 138
VIEW_MAINTENANCE
23 FUNCTION SAPLSVIM LSVIMU03 427
VIEW_MAINTENANCE_CALL
22 FORM SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYF01 358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH LDSYHI12 56
D1200_PAI_MODULE
20 FUNCTION SAPLDSYH LDSYHU11 70
OUTLINE_LIST_TCODES
19 FUNCTION SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYU07 103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION SAPLS_CUS_IMG_ACTIVITY LS_CUS_IMG_ACTIVITYU04 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION SAPLS_IMG_TOOL_1 LS_IMG_TOOL_1U02 63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION SAPLSHI1 LSHI1U16 120
STREE_EXIT_TO_OBJECT
15 FORM SAPLSHI01 LSHI01F0Y 185
EXIT_TO_OBJECT_HC
14 FORM SAPLSHI01 LSHI01F05 70
HANDLE_LINK_CLICK
13 METHOD SAPLSHI01 LSHI01CI1 25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM013 53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM00S 60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD CL_GUI_COLUMN_TREE============CP CL_GUI_COLUMN_TREE============CM01O 15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD CL_TREE_CONTROL_BASE==========CP CL_TREE_CONTROL_BASE==========CM017 32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD CL_GUI_CFW====================CP CL_GUI_CFW====================CM001 138
CL_GUI_CFW=>DISPATCH
7 FORM SAPLSHI01 LSHI01F1M 17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION SAPLSHI01 LSHI01U12 30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01 LSHI01I01 55
PAI_200
4 FUNCTION SAPLSHI01 LSHI01U07 165
STREE_BROWSER_DYNP_HC
3 FUNCTION SAPLSHI21 LSHI21U03 144
STREE_EXTERNAL_DISPLAY
2 FORM SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5F01 20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5I01 39
USER_COMMAND_0100
Chosen variables
Name
Val.
No. 43 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No. 42 Ty. FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store = 0x00000000
ext1 = 0xF8EB2E3D
shmId = 0 (0x00000000)
id = 208 (0xD0000000)
label = 2299 (0xFB080000)
fill = 0 (0x00000000)
leng = 572 (0x3C020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000317
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x30F18E3D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No. 41 Ty. FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00 000 00 00 00 00 0000 00 000 000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No. 40 Ty. FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No. 39 Ty. FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FUNCTION
Name ADDR_INSERTDear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya -
Short Dump on BAPI_TRANSACTION_COMMIT with destination NONE
Hi All
I am using SAP-PM with Compatible Unit(CU) functionality in ECC6 environment.
After we release the CU design to Generate order we get SHORT DUMP.
Any help will be of great help.
I am pasting the details from the dump file here.
Please let me know.
Appretaite your help.
Thanks
Meghana
Runtime Errors CALL_FUNCTION_REMOTE_ERROR
Date and Time 27.08.2007 18:01:10
Short text
"The current application triggered a termination with a short dump."
What happened?
Error in the ABAP Application Program
The current ABAP program "/***/SAPLCUORDER_N" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "MESSAGE_TYPE_X"
on the called page.
How to correct the error
Please refer to the notes described in the
short dump.
System environment
SAP-Release 700
Application server... "MB1ES1005"
Network address...... "10.191.97.206"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "MB1ES1005"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jul 25 2007 00:57:05"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 121
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 14633136
Heap.... 0
Page.... 131072
MM Used. 5005432
MM Free. 1263944
User and Transaction
Client.............. 200
User................ 10086330
Language key........ "E"
Transaction......... "/***/DESIGN "
Transactions ID..... "409954DC5D77F1C58E2D0013725D3B3B"
Program............. "/***/SAPLCUORDER_N"
Screen.............. "/***/SAPLCUORDER_N 2000"
Screen line......... 34
Information on where terminated
Termination occurred in the ABAP program "/***/SAPLCUORDER_N" - in
"SAVE_DESIGN".
The main program was "/***/SAPLCUORDER_N ".
In the source code you have the termination point in line 594
of the (Include) program "/***/LCUORDER_NF07".
Source Code Extract
Line
SourceCde
564
ENDIF .
565
ENDLOOP .
566
IF l_ret-type = 'E' OR
567
l_ret-type = 'A' .
568
CLEAR: save_okcode .
569
570
Show Messages
571
CALL FUNCTION '/***/N_LOG_ADD_MSG'
572
EXPORTING
573
i_log_type = 'G'
574
TABLES
575
t_ret = t_ret.
576
PERFORM log_order_create_show .
577
Show first Message
578
MESSAGE ID l_ret-id TYPE l_ret-type NUMBER l_ret-number
579
WITH
580
l_ret-message_v1 l_ret-message_v2
581
l_ret-message_v3 l_ret-message_v4.
582
CALL FUNCTION '/***/N_DESIGN_INIT' .
583
ELSE .
584
IF g_design_mode = con_mode_crea.
585
Need to update DMS documents with real design number
586
PERFORM document_prepare_002 USING con_desnum_tmp_1
587
lv_desnum.
588
ENDIF.
589
Commit design BAPI's
590
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
591
592
IF save_okcode = con_order.
593
Commit order BAPI's
>>>>>
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
595
DESTINATION 'NONE'.
596
597
call of fct. RFC_CONNECTION_CLOSE is important to get a new
598
initial roll area with initial internal tables next time
599
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
600
EXPORTING
601
destination = 'NONE'
602
EXCEPTIONS
603
destination_not_open = 1
604
OTHERS = 2.
605
ENDIF.
606
607
IF lv_desnum IS INITIAL .
608
lv_desnum = /***/cudesign-desnum .
609
ENDIF .
610
SET PARAMETER ID '/***/DESNUM' FIELD lv_desnum .
611
Changes saved
612
MESSAGE ID '/***/MSG' TYPE 'S' NUMBER '529' WITH lv_desnum .
613
ENDIF .
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
2000
SY-UCOMM
CU01
SY-TITLE
Change Design: 50000109
SY-MSGTY
X
SY-MSGID
00
SY-MSGNO
341
SY-MSGV1
MESSAGE_TYPE_X
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070827
SY-UZEIT
180110
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 594
SAVE_DESIGN
3 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 2616
CHECK_AND_SAVE_F07
2 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF04 311
USER_COMMAND_D2000
1 MODULE (PAI) /***/SAPLCUORDER_N /***/LCUORDER_NI05 28
USER_COMMAND_2000
Chosen variables
Name
Val.
No. 4 Ty. FORM
Name SAVE_DESIGN
%_DUMMY$$
2222
0000
0000
0000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_DESIGN_MODE
R
5
2
0
0
CON_MODE_CREA
I
4
9
0
0
GT_NODE_CUI
Table[initial]
SY-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DESNUM_TMP_1
TM00000001CY
543333333345
4D0000000139
000000000000
000000000000
LV_DESNUM
222222222222
000000000000
000000000000
000000000000
SAVE_OKCODE
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
CON_ORDER
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
SY-XPROG
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DELETE
LVMS
4545222222222222222222222222222222222222222222222222222222222222222222
C6D3000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
No. 3 Ty. FORM
Name CHECK_AND_SAVE_F07
CL_GUI_ALV_GRID=>MC_MB_VIEW
&MB_VIEW
2445544522222222222222222222222222222222222222222222222222222222222222
6D2F695700000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
GT_OP
Table IT_303[2x1320]
PROGRAM=/***/SAPLCUORDER_NDATA=GT_OP
Table reference: 118
TABH+ 0(20) = 7039FC3C5824DB3C00000000760000002F010000
TABH+ 20(20) = 0200000028050000FFFFFFFF0400000030140000
TABH+ 40( 8) = 08000000C1308001
store = 0x7039FC3C
ext1 = 0x5824DB3C
shmId = 0 (0x00000000)
id = 118 (0x76000000)
label = 303 (0x2F010000)
fill = 2 (0x02000000)
leng = 1320 (0x28050000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000093
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010FC3C
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 234 (0xEA000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x60B7153D
collHook = 0x00000000
ext2 = 0x1024DB3C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE00FFC3C
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
G_BADI_PROGRAM
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LOG_ERROR
2
0
0
0
CON_BUTT_DELETED
@11QDelete@
43355466676422222222222222222222222222222222
011C145C545000000000000000000000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
G_CU_EXIT_CU_EXPLODE
F0000000
F0000000
/***/CUDESIGN-OBJNR
CY00000000000000008835
4533333333333333333333
3900000000000000008835
0000000000000000000000
0000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_SEC_COUNT
0
0000
0000
LV_UPD
X
5
8
0
0
%_SPACE
2
0
0
0
GS_ROW_NO
0.0.0.1.
0000
1000
0000
0000
SCREEN
/***/CUDESIGN-GLTRP
2454245445444244555222222222222222222222222222222222222222222222222222222222222222222222222222
F35DF3545397ED7C420000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
00
33222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
SWO_%CONTAINER
000000000
2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
0
0
SY-MSGNO
341
333
341
000
000
/***/CVCUI-CUTYP
2
0
0
0
SY-MSGV1
MESSAGE_TYPE_X
44554445555455222222222222222222222222222222222222
D533175F4905F8000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
No. 2 Ty. FORM
Name USER_COMMAND_D2000
/***/CVCUI
0.0.0.0.0.0.0.1. 000000
2220000000022222222222222222222222222222222222222222222222222222222222222222222222223333332222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_MODE_COPY
C
4
3
0
0
LT_BAPI_RETURN
Table IT_1778[2x1088]
PROGRAM=/***/SAPLCUORDER_NFORM=USER_COMMAND_D2000DATA=LT_BAPI_RETURN
Table reference: 310
TABH+ 0(20) = 8837083D407E1C3D0000000036010000F2060000
TABH+ 20(20) = 0200000040040000FFFFFFFF04000000F0170000
TABH+ 40( 8) = 08000000C1308101
store = 0x8837083D
ext1 = 0x407E1C3D
shmId = 0 (0x00000000)
id = 310 (0x36010000)
label = 1778 (0xF2060000)
fill = 2 (0x02000000)
leng = 1088 (0x40040000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 1
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x50C6073D
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1534 (0xFE050000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x6067033D
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE82F063D
delta_head = 0000000000000000CF000000000000000400000020180000000000004D00430055004F000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CON_MODE_ORDE
O
4
F
0
0
TGSBT
22222222222222222222222222222222222222
00000000000000000000000000000000000000
00000000000000000000000000000000000000
00000000000000000000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
LS_NUMBERS-AUFNR_NEW
000001000677
333333333333
000001000677
000000000000
000000000000
T024I
200UT10100PG for Term & Comp
33355333335426672567622246672222222222222222
20054101000706F20452D0603FD00000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
LS_T399X
200UT10UM01 X INST 30UT01UT01
3335533543322222222222222222252222445522335533553322222222222222222222222222222222222222222222
20054105D01000000000000000000800009E3400305401540100000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CON_VBKZ_U
U
5
5
0
0
/***/CU_ORDER_IO-DISP_FACTOR
2097152
0
0
LS_DESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
/***/CUDESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_DROP_COUNT
0
0000
0000
LS_DESIGN-DESNUM
000050000109
333333333333
000050000109
000000000000
000000000000
No. 1 Ty. MODULE (PAI)
Name USER_COMMAND_2000
GT_SELTAB_INIT
Table[initial]
Internal notes
The termination was triggered in function "RfcExtendedReceive"
of the SAP kernel, in line 422 of the module
"//bas/700_REL/src/krn/rfc/abrfcrcv.c#4".
The internal operation just processed is "FUNC".
Internal mode was started at 20070827180011.
Status of connection:
RFC state: " "
RFC error text: "RFC_ERROR_SYSTEM_FAILURE"
CPI-C error text: "The current application triggered a termination with a short
dump."
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=26488)
When : 8/27/2007 18:1:10.942
Threads : 2
Computer Name : MB1ES1005
User Name : ec6adm
Number of Processors: 2
Processor Type: x86 Family 15 Model 4 Stepping 10
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 5e10
eax=000f93c0 ebx=0000042c ecx=00003118 edx=00000000 esi=0000042c edi=00000000
eip=7c82ed54 esp=056d71f0 ebp=056d7260 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:056d71f0=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:62bd5803=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
056d7260 77e6ba42 0000042c 0001d4c0 00000000 056d7298 ntdll!KiFastSystemCallRet
056d7274 0109504d 0000042c 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
056d7298 00582118 00582151 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess (ntstcdbg.c (501))
056d729c 00582151 7c38b5c8 7c38b5c8 7c38b5c8 01e9b1b8 disp+work!NTStack (dptstack.c (1367))
056d72b8 00582185 7c38b5c8 00000000 008b7ec8 7c38b5c8 disp+work!CTrcStack2 (dptstack.c (352))
056d72c4 008b7ec8 7c38b5c8 00000000 005f0059 00330030 disp+work!CTrcStack (dptstack.c (182))
056d72e8 008bb39f 00711076 056d8018 056d7be8 00200020 disp+work!rabax_CStackSave [abrabax.c (7063)
056d7b90 009eca8b 020b9e4c 020b9e14 000001a6 5d88acf0 disp+work!ab_rabax (abrabax.c (1243))
056d7bcc 009ed19e 00000003 00711076 00000020 00000000 disp+work!rcv_message (abrfcrcv.c (422))
056d8068 009ed29d 00000003 00000000 00710c47 056d80c0 disp+work!RfcExtendedReceive [abrfcrcv.c (14
056d808c 00714873 00000003 00710c47 056d80c0 00711076 disp+work!ab_rfcreceive (abrfcrcv.c (59))
056d80e4 0071886b 2694a7c8 2694a7cc 2694a7cc 2694a7cc disp+work!jfunc_get (abfunc.c (5103))
056d89f4 007191d0 00000003 000000b4 00000000 05e8b7c0 disp+work!jfunc_nonstandard [abfunc.c (1655)
056dcfb0 006e3e2d 00000003 3ced8f90 00000000 056dd018 disp+work!ab_jfunc (abfunc.c (554))
056dd018 0081cb5e 00000000 3ced8f90 056dd164 3cedb514 disp+work!ab_extri (abextri.c (552))
056dd02c 00897dbd 00000000 3cedae46 005bf4cd 3ceda13c disp+work!ab_xevent (abrunt1.c (281))
056dd038 005bf4cd 3ceda13c 000000ea 3cedae46 00000000 disp+work!ab_dstep (abdynpro.c (492))
056dd164 005c25be 3ced8f90 3ced8f90 056dfc78 00000000 disp+work!dynpmcal (dymainstp.c (2398))
056dd178 005c1def 00000001 3ced8f90 00000003 056dfc78 disp+work!dynppai0 (dymainstp.c (1004))
056dd194 00595e69 3ced8f90 00000001 00000001 00000001 disp+work!dynprctl (dymainstp.c (360))
056dfcec 00490e06 00000004 0049d15f 00000004 01dadd00 disp+work!dynpen00 (dymain.c (1628))
056dfcf4 0049d15f 00000004 01dadd00 00000003 00000002 disp+work!Thdynpen00 (thxxhead.c (4773))
056dfee0 0049d6d6 00000001 00000000 00000000 00430000 disp+work!TskhLoop (thxxhead.c (4455))
056dff00 00421c36 00000000 00000000 7ffde000 056dff60 disp+work!ThStart (thxxhead.c (1173))
056dff14 00401080 00000003 05876980 00000001 00000000 disp+work!DpMain (dpxxdisp.c (1121))
056dff60 01242970 00000003 05876980 05877a10 01cce000 disp+work!nlsui_main (thxxanf.c (82))
056dffc0 77e523e5 00000000 00000000 7ffde000 8967f020 disp+work!wmainCRTStartup (crtexe.c (395))
056dfff0 00000000 0124282d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 61fc
eax=00000000 ebx=00000103 ecx=0587a700 edx=02714360 esi=00000000 edi=00000000
eip=7c82ed54 esp=0799fec0 ebp=0799ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0799fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:64e9e4d3=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0799ff04 0119030a 000006e0 00000000 00000000 0587a798 ntdll!KiFastSystemCallRet
0799ff84 7c349565 00000000 00000000 00000000 0587a700 disp+work!SigIMsgFunc (signt.c (610))
0799ffb8 77e6608b 0587a700 00000000 00000000 0587a700 MSVCR71!endthreadex
0799ffec 00000000 7c3494f6 0587a700 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
/***/SAPLCUORDER_N
0
10.08.2007
10:12:44
541696
E
1
Typ
/***/CUDESIGN
0
10.08.2007
10:05:19
7168
2
Typ
/***/CU_ORDER_IO
0
10.08.2007
09:53:38
4096
3
Typ
/***/DESTYPE
0
10.08.2007
10:05:21
2048
4
Typ
/***/PRF_ORD
0
10.08.2007
10:05:21
4096
5
Prg
SAPMSSYD
0
04.04.2007
10:28:36
21504
E
6
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
7
Typ
/***/G_CUST
0
10.08.2007
09:53:39
3072
8
Prg
/***/SAPLTABLES
8
10.08.2007
10:13:00
19456
E
9
Typ
/***/G_CHAR
0
10.08.2007
10:05:21
3072
10
Prg
SAPLCTCE
10
09.09.2004
14:18:34
9216
E
11
Typ
CABN
0
18.09.2001
10:02:26
12288
12
Prg
SAPLICON
12
04.04.2007
10:10:28
27648
E
13
Prg
%_CICON
12
07.02.2006
10:40:00
104448
E
14
Typ
ICONT
0
04.04.2007
10:10:08
2048
15
Typ
NRIV
0
02.04.1998
08:14:54
3072
16
Prg
SAPLBSVA
16
04.04.2007
14:47:00
296960
E
17
Typ
/***/CU_ORDER_S_OP_N
0
10.08.2007
09:53:39
14336
18
Prg
CL_GUI_CONTROL================CP
18
28.02.2005
21:03:09
112640
E
19
Prg
%_CCNTL
18
18.02.2005
14:15:08
15360
E
20
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
21
Prg
CL_GUI_OBJECT=================CP
21
05.07.2005
13:10:15
375808
E
22
Prg
CL_GUI_CFW====================CP
22
28.02.2005
21:03:09
172032
E
23
Prg
CL_GUI_PROPS_CONSUMER=========CP
23
18.02.2005
14:15:08
30720
E
24
Prg
SAPLTHFB
24
04.04.2007
13:24:38
390144
E
25
Typ
EUDB
0
06.11.2003
20:28:08
8192
26
Prg
SAPLSFES
26
08.08.2007
16:46:17
259072
E
27
Prg
SAPLSPLUGIN
27
09.09.2004
14:18:36
8192
E
28
Prg
SAPLSTTMYes even i find it strange. But there is no syntax error and the fact is that it was working 2 days back. Suddenly it has started giving us this dump.
The code is as follows.
Commit design BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
IF save_okcode = con_order.
Commit order BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
DESTINATION 'NONE'.
Here con_order is CU01.
Please let me know if anybody has faced this problem earlier.
Thanks in Advance
Meghana -
RE: Short dump after activation of BADI
Hi all,
We are getting short dumps in all the transactions after activating the BADI 'BADI_LAYER'
We are not able to execute any of the transactions.
The details of runtimeerror
Runtime Errors RAISE_EXCEPTION
Date and Time 30.07.2007 09:58:06
Short text
Exception condition "SINGLE_EXIT_MULTIPLY_ACTIVE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "SINGLE_EXIT_MULTIPLY_ACTIVE".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "SINGLE_EXIT_MULTIPLY_ACTIVE"
or
"SAPMF05A " "SINGLE_EXIT_MULTIPLY_ACTIVE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapdevp"
Network address...... "192.168.0.205"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAPDEVP"
Database type..... "ORACLE"
Database name..... "TDV"
Database user ID.. "SAPSR4"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 6271344
Heap.... 0
Page.... 57344
MM Used. 1728072
MM Free. 360856
User and Transaction
Client.............. 400
User................ "FIUSER01"
Language key........ "E"
Transaction......... "FB50 "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPMF05A 1010"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPMF05A ".
In the source code you have the termination point in line 145
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
115
SELECT SINGLE is_impl FROM badiisimpled INTO is_impl
116
WHERE badi_name = mig_badi_name.
117
IF sy-subrc NE 0.
118
not yet filled
119
is_impl = cl_enh_badi_tool_utilities=>update_badiisimpled( mig_badi_name ).
120
ENDIF.
121
122
IF is_impl = 'X'.
123
ok at least one implementation found
124
act_imp_existing = 'X'.
125
ENDIF.
126
127
ENDIF.
128
ENDIF.
129
ELSE.
130
131
check how many implementations exist for an exit
132
CALL METHOD cl_badi_flt_data_trans_and_db=>act_imps_per_flt_val
133
EXPORTING
134
runtime_call = seex_true
135
exit_name = exit_name
136
EXCEPTIONS
137
singular_exit_multiply_active = 1
138
no_active_implementation = 2
139
only_default_implementation = 3
140
OTHERS = 4.
141
CASE sy-subrc.
142
WHEN 0.
143
act_imp_existing = seex_true.
144
WHEN 1.
>>>>>
RAISE single_exit_multiply_active.
146
WHEN 2.
147
act_imp_existing = seex_false.
148
WHEN 3.
149
act_imp_existing = seex_false.
150
def_impl = seex_true.
151
WHEN 4.
152
RAISE data_incons_in_exit_managem.
153
ENDCASE.
154
155
new parameter considered for performance purposes
156
IF act_imp_existing = seex_true OR
157
def_impl = seex_true OR
158
null_instance_accepted = seex_false.
159
160
ok, then do your job
161
CREATE OBJECT exit TYPE (abs_type_classname).
162
CATCH SYSTEM-EXCEPTIONS move_cast_error = 1.
163
instance ?= exit.
164
ENDCATCH.
Contents of system fields
Name
Val.
SY-SUBRC
1
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
FSKB
SY-UCOMM
SY-TITLE
Enter G/L Account Document: Company Code TJ01
SY-MSGTY
S
SY-MSGID
B!
SY-MSGNO
015
SY-MSGV1
00001140
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070730
SY-UZEIT
095806
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
5 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 145
CL_EXITHANDLER=>GET_INSTANCE
4 METHOD CL_EXIT_MASTER================CP CL_EXIT_MASTER================CM004 2
CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
3 METHOD CL_EX_FI_HEADER_SUB_1300======CP CL_EX_FI_HEADER_SUB_1300======CM003 53
CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
2 FORM SAPMF05A MF05AF00_D0100_PRE_APPL_SUB_2 50
D0100_PRE_APPL_SUB_PBO
1 MODULE (PBO) SAPMF05A MF05AO00_D0100_PRE_APPL_SUB 10
D0100_PRE_APPL_SUB
Chosen variables
Name
Val.
No. 5 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
BADI_LAYER
44445445452222222222
2149FC19520000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
%_SPACE
2
0
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SEEX_TRUE
X
5
8
0
0
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_TABLE_BADIISIMPLED>
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 4 Ty. METHOD
Name CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
%_SPACE
2
0
0
0
SYST-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_EXIT_MASTER=>LAYER_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
No. 3 Ty. METHOD
Name CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
IM_BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IM_X_NO_INPUT
2
0
0
0
FLT_VAL
IN
44
9E
00
00
<EXIT_OBJ>-IMP_CLASS
<FLT_CACHE_LINE>-OBJ
|
| F0000000 |
| F0000000 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| ME->INSTANCE_BADI_TABLE |
| Table[initial] |
| <EXIT_OBJ> |
| ??? |
| ?????? |
| ?????? |
| <%_L001> |
| ??? |
| ?????? |
| ?????? |
| RSJOBINFO |
| 00000000000000 ## |
| 2222222222222222222222222222222233333333333333222222222222222222222222222222222200 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| SY-REPID |
| CL_EX_FI_HEADER_SUB_1300======CP |
| 4454554454444455554533333333334522222222 |
| 3CF58F69F851452F352F1300DDDDDD3000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| <%_L001>-METHOD_NAME |
| ??? |
| ?????? |
| ?????? |
| EXIT_OBJ_TAB |
| Table[initial] |
| SY-SUBRC |
| 1 |
| 0000 |
| 1000 |
| ME |
|
F0000000
C0003000
SXRT_TRUE
X
5
8
0
0
No. 2 Ty. FORM
Name D0100_PRE_APPL_SUB_PBO
*BSEG-STBUK
2222
0000
0000
0000
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
KDBTAB-DMBTR
0.0.0.0.0.0.1.
0000000
000000C
%_SPACE
2
0
0
0
KDPTAB-BELNR
2222222222
0000000000
0000000000
0000000000
KDPTAB-GJAHR
0000
3333
0000
0000
0000
KDPTAB-BUZEI
000
333
000
000
000
KDBTAB-XRUND
2
0
0
0
SPACE
2
0
0
0
F05ACTRL
2
0
0
0
SYST
######################################ð#######################################~######### C####
00000000000000000000000000000000000000F0000000000000000000000000000000000000107000000050240000
000000200000000000002010100010000000000000000010400000000000000000000000000080E000200080030100
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000D000000C
BSED
0000000# ############## 0000000000000000
2222222222222222233333330200000000000000223333333333333333222222222222222222222222222222222222
00000000000000000000000000000C000000C000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000C0000000C000000C000000000000000000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
G_APPL_SUB_ACTIVE
X
5
8
0
0
CHAR_X
X
5
8
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BKPF-BUKRS
TJ01
5433
4A01
0000
0000
BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_APPL_SUB_DISABLE
2
0
0
0
T005-INTCA
IN
44
9E
00
00
No. 1 Ty. MODULE (PBO)
Name D0100_PRE_APPL_SUB
C_FIELD_DIALOG_ALL
BUTTON_DIALOG_ALL
4555445444444544422222222222222222222222222222222222222222222222222222222222222222222222222222
2544FEF491CF7F1CC00000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_jfune"
of the SAP kernel, in line 2561 of the module
"//bas/700_REL/src/krn/runt/abfunc.c#10".
The internal operation just processed is "FUNE".
Internal mode was started at 20070730095806.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=4436)
When : 7/30/2007 9:58:6.359
Threads : 2
Computer Name : SAPDEVP
User Name : SAPServiceTDV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 250c
eax=34d52300 ebx=000003f8 ecx=0001ccc0 edx=34d039e0 esi=000003f8 edi=00000000
eip=7c82ed54 esp=053fceb4 ebp=053fcf24 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053fceb4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:6627b4c7=00002100
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053fcf24 77e6ba42 000003f8 0001d4c0 00000000 053fcf5c ntdll!KiFastSystemCallRet
053fcf38 0100b3aa 000003f8 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
053fcf5c 0055b4ac 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess
053fcf60 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 01d35ab0 disp+work!NTStack
053fcf7c 0055b519 7c38b5c8 00000000 008536a8 7c38b5c8 disp+work!CTrcStack2
053fcf88 008536a8 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack
053fcfac 008569fa 6d1d037c 0000001b 00000000 01cfc168 disp+work!rabax_CStackSave [abrabax.c (6871)
053fd084 006aaaf4 0134837c 0134835c 00000a01 235f1640 disp+work!ab_rabax
053fd0c0 0067bb56 00000003 34cf5708 00000000 053fd128 disp+work!ab_jfune
053fd128 007af183 00000000 34cf5708 053fd274 34cf8c26 disp+work!ab_extri
053fd13c 00837a37 00000000 34cf7dd6 00596fa0 34cf68b4 disp+work!ab_xevent
053fd148 00596fa0 34cf68b4 000003db 34cf7dd6 00000000 disp+work!ab_dstep
053fd274 00597fa1 34cf5708 34cf5708 053ffd04 00597b13 disp+work!dynpmcal
053fd284 00597b13 34cf5708 34cf5708 00000003 053ffd04 disp+work!dynppbo0
053fd2a0 0056dcf1 34cf5708 0006e768 00000000 0000000c disp+work!dynprctl
053ffd04 00471848 00000013 07de0048 00000001 00494960 disp+work!dynpen00
053ffd14 00494960 0000000c 00000000 00000003 00000002 disp+work!Thdynpen00
053ffee0 00494ee2 00000001 00000000 00000000 00430000 disp+work!TskhLoop
053fff00 00421150 00000000 00000000 7ffd8000 053fff60 disp+work!ThStart
053fff14 00401080 00000003 003f6850 00000001 00000000 disp+work!DpMain
053fff60 011a94a0 00000003 003f6850 003f78f8 01bd5000 disp+work!nlsui_main
053fffc0 77e523e5 00000000 00000000 7ffd8000 88602680 disp+work!wmainCRTStartup
053ffff0 00000000 011a935d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 27bc
eax=00000001 ebx=00000103 ecx=fffffffe edx=003f01f8 esi=00000000 edi=00000000
eip=7c82ed54 esp=075dfec0 ebp=075dff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:075dfec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:6845e4d3=50004500
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
075dff04 010f7ffc 000006c0 00000000 00000000 003f77d0 ntdll!KiFastSystemCallRet
075dff84 7c349565 00000000 00000000 00000000 0587ff08 disp+work!SigIMsgFunc
075dffb8 77e6608b 0587ff08 00000000 00000000 0587ff08 MSVCR71!endthreadex
075dffec 00000000 7c3494f6 0587ff08 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMF05A
0
22.05.2007
11:37:49
1563648
E
1
Prg
SAPMSSYD
0
10.01.2007
12:33:28
21504
E
2
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
3
Typ
TFDIR
0
13.02.2005
17:31:57
3072
4
Prg
SAPLAPAR_EBPP_SERVICES
4
03.01.2007
11:23:55
114688
E
5
Typ
T042ZEBPP
0
08.01.2002
14:42:24
2048
6
Typ
T020
0
24.02.1999
03:17:19
3072
7
Typ
RFOPT2
0
11.12.2003
15:00:17
5120
8
Prg
SAPFF001
0
22.05.2007
11:37:49
195584
E
9
Typ
SWOTOBJID
0
04.05.1995
15:20:52
2048
10
Prg
SAPLSWOR
10
10.01.2007
12:33:34
292864
E
11
Typ
TFBUF
0
30.11.1998
22:08:34
3072
12
Typ
ACC_KONTEXT
0
08.01.2003
17:30:26
3072
13
Typ
BKPF
0
13.03.2006
11:01:29
18432
14
Prg
SAPLFACSCORE
14
01.12.2006
22:00:12
13312
E
15
Typ
T001
0
25.08.2005
22:03:13
13312
16
Prg
SAPLACHD
16
03.01.2007
11:23:55
51200
E
17
Prg
SAPFSPOR
0
09.09.2004
14:18:32
15360
E
18
Prg
SAPLSCNT
18
18.02.2005
14:16:06
30720
E
19
Typ
DYCBOX
0
20.08.1998
11:16:53
3072
20
Prg
SAPLSVSM
20
18.02.2005
14:16:06
27648
E
21
Prg
SAPLSGUI
21
10.01.2007
12:33:33
82944
E
22
Prg
SAPLSTTM
22
05.07.2005
13:10:18
69632
E
23
Prg
SAPLSBDC
23
05.07.2005
13:10:18
44032
E
24
Prg
CL_DATAPROVIDER===============CP
24
28.02.2005
21:00:46
49152
E
25
Prg
%_CCNTL
24
18.02.2005
14:15:08
15360
E
26
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
27
Prg
SAPLSTUP
27
08.03.2005
19:04:31
73728
E
28
Prg
SAPLCNDP
28
01.12.2006
22:04:33
193536
E
29
Prg
SAPSHDTV
18
05.01.2005
16:26:16
33792
E
30
Typ
SHDSTU
0
14.12.1998
23:15:34
2048
31
Typ
SHDSTCIU
0
14.12.1998
23:15:34
2048
32
Prg
SAPFGUICNTL
0
18.02.2005
14:15:08
24576
E
33
Prg
SAPLOLEA
33
05.07.2005
13:10:18
96256
E
34
Prg
SAPLSFES
34
10.01.2007
13:26:20
256000
E
35
Prg
SAPLSPLUGIN
35
09.09.2004
14:18:36
8192
E
36
Typ
ARFCRDATA
0
13.02.2005
18:20:24
7168
37
Prg
SAPLGRFC
37
13.02.2005
18:20:25
16384
E
38
Typ
SWCBCONT
0
15.11.2000
17:55:11
3072
39
Typ
OLE_VERBS
0
04.04.1995
16:02:20
2048
40
Typ
OLE_PA
0
04.04.1995
16:02:19
2048
41
Typ
ACGL_HEAD
0
11.12.2003
14:59:21
8192
42
Typ
RF05A
0
11.04.2005
11:50:21
38912
43
Typ
TCURC
0
01.12.1999
12:14:40
2048
44
Prg
SAPLFAGL_ACTIVATION_SERVICES
44
30.04.2007
17:00:55
45056
E
45
Prg
SAPLSTR9
45
09.05.2006
10:39:47
39936
E
46
Prg
CONTEXT_X_TR_SYS_PARAMS
45
09.05.2006
10:39:47
40960
E
47
Typ
TCONT
0
09.09.2004
14:18:43
2048
48
Typ
CONTEXTB
0
09.09.2004
14:15:52
6144
49
Typ
FAGL_ACTIVEC
0
19.08.2004
16:55:10
5120
50
Typ
FAGL_CHECK_SETUP
0
11.12.2003
15:01:05
2048
51
Prg
SAPLSHD0
51
03.01.2007
06:52:22
232448
E
52
Prg
SAPLBFFM3
52
10.01.2007
13:15:21
169984
E
53
Typ
OFIWA
0
15.04.1998
00:11:05
2048
54
Typ
FTEXTS
0
20.08.2001
12:13:26
3072
55
Prg
SAPLITSR
55
10.01.2007
14:23:52
107520
E
56
Typ
FMRFC
0
13.08.1997
12:32:59
2048
57
Typ
TBE01
0
20.01.2003
16:41:38
2048
58
Typ
TBE31
0
03.09.1997
03:01:11
2048
59
Typ
TBE31
0
03.09.1997
03:01:11
2048
60
Typ
TBE11
0
03.09.1997
03:01:06
2048
61
Prg
CONTEXT_X_SP_INFO
55Hello Sowmya
The BAdI BADI_LAYER is not defined for <b>Multiple-Use</b> (see checkbox on tabstrip <i>Attributes</i>).
Apparently you have created <i>several </i>implementation of this BAdI and activated <i>several </i>(at least 2) of these implementations.
If you inactivate all except a single implementation the BAdI (and all transactions using this BAdI) should work again.
Regards
Uwe -
BCS Release Request Short dump
Hello,
I'm trying to release my costumizing request, that contains the SEM-BCS configuration, although i'm getting a short-dump.
The description is as follows:
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UG_MD_TR_METHOD_EXPORT=====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_UG_MD_TR_METHOD_EXPORT=====CP" or "CL_UG_MD_TR_METHOD_EXPORT=====CM003"
"UGMD_EXTRACT_SID_2"
Information on where terminated
Termination occurred in the ABAP program "CL_UG_MD_TR_METHOD_EXPORT=====CP" -
in "UGMD_EXTRACT_SID_2".
The main program was "RDDM0001 ".
In the source code you have the termination point in line 62
of the (Include) program "CL_UG_MD_TR_METHOD_EXPORT=====CM003".
Source Code Extract
Line SourceCde
32 FIELD-SYMBOLS <lt_table> TYPE INDEX TABLE.
33 FIELD-SYMBOLS <ld_fsid> TYPE ug_sid.
34 FIELD-SYMBOLS <ld_vsid> TYPE ug_sid.
35 * FIELD-SYMBOLS <lt_target> TYPE ANY TABLE.
36
37 ASSIGN io_itab->rd_wa->* TO <ls_wa>.
38 IF i_value_sid IS NOT INITIAL.
39 ASSIGN COMPONENT i_value_sid
40 OF STRUCTURE <ls_wa>
41 TO <ld_vsid>.
42 CHECK sy-subrc = 0.
43 ELSE.
44 CREATE DATA lr_sid.
45 ASSIGN lr_sid->* TO <ld_vsid>.
46 CLEAR <ld_vsid>.
47 ENDIF.
48
49 IF NOT i_fieldname_sid IS INITIAL. "Start hah160603.1
50 ASSIGN COMPONENT i_fieldname_sid
51 OF STRUCTURE <ls_wa>
52 TO <ld_fsid>.
53 CHECK sy-subrc = 0.
54 ELSE.
55 CALL METHOD ugmd_get_fieldname_to_table
56 EXPORTING
57 i_tabname = i_datainfo-tabname
58 IMPORTING
59 e_fieldname = ld_fieldname.
60 lo_fieldname = cl_ug_md_fieldname=>if_ug_md_fieldname~get_instance(
61 ld_fieldname ).
62 >>>>> ld_fieldname_sid_fix = lo_fieldname->ds_data-sid.
63 ASSIGN ld_fieldname_sid_fix TO <ld_fsid>.
64 ENDIF. "End hah160603.1
65
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 1
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 1
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY TDR_FULL
SY-UCOMM REFR
SY-TITLE Transport organizer: ordens
SY-MSGTY I
SY-MSGID FINB_TR
SY-MSGNO 009
SY-MSGV1 &
SY-MSGV2 &
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080904
SY-UZEIT 200112
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASET
If someone have gone trough a similar experience, or have any tip of how to solve this issue, i'd apreciate a comment.
Will award points for valuable help.
Thank youHi Ricardo,
You tried to transport the BCS' configuration, right?
If in the request was the full set of settings from the start of the project, the it will definitely fail.
There are some restrictions in BCS transport. See, for example the OSS Note #627924 - 'Restrictions with transport in BW-based SEM-BCS'. It particularly says:
"For the initial system setup, and after substantial changes in the data model, you should transport the Customizing by means of manually created transport requests. We advise you not to use the automatic recording of all Customizing settings during the first implementation phase in the development system and not to use this request for the structure of the test and productive systems.
During the transport of a new consolidation area, the following settings should be transported in the following sequence:
1. Data basis
2. Consolidation area
3. Special versions
After the import of the data basis and the consolidation area, these settings should be checked in the target system. In particular, the RFC destination, the InfoCubes and ODS objects, as well as the InfoObjects. Note that RFC destinations, InfoCubes, ODS objects, virtual cubes and InfoObjects cannot be transported from the consolidation workbench with the transport functions. For instance, you have to transport and activate the InfoCubes and InfoObjects using the BW."
I usually transport the BCS setting in a little transport requests in this order:
- all BW objects and settings
- data basis (with source DB)
- cons area
- special versions
- versions
- master data
...etc.
Hope this helps. -
Empty System Fields after error creates a short dump
Hello!
Could someone please help me?
After calling a function, I catch errors with sy-subrc NE 0.
Handling this error the "normal" way throws a short dump (I marked the row bold), because all the system fields are empty!
Could someone please give me a hint, how to handle this situation?
Many thanx in advance!
Perhaps some code:
CALL FUNCTION 'Z_CONFIRM'
EXPORTING
is_bdnum = is_bed-bdnum
TABLES
et_return = lt_return
EXCEPTIONS
error_occured = 1
lock_error = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I get a short dump with this:
Content of the system fields
Name
Wert
SY-SUBRC
1
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP-Steuerung
SY-MSGTY
SY-MSGID
SY-MSGNO
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080117
SY-UZEIT
080907
SY-XPROG
SY-XFORMHi,
You need to capture the message like this way
IF sy-subrc eq 1.
message e999(your mesage class) with 'Error Occured'.
endif.
IF sy-subrc eq 2.
message e999(your mesage class) with 'Lock error'.
endif.
IF sy-subrc eq 3.
message e999(your mesage class) with 'Other Errors'.
endif.
a® -
Getting Short dump When Executing MIGO: SYNTAX_ERROR
Please Help,
I am getting this dump, when i hit MIGO transaction
Runtime Errors SYNTAX_ERROR
Date and Time 10.12.2008 08:28:03
Short text
Syntax error in program "MB_MIGO_BADI==================CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
MB_MIGO_BADI==================CP :
"The specified type cannot be converted into the target variables."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "DMATE"
Network address...... "140.1.1.141"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dmate"
Database type..... "ADABAS D"
Database name..... "AD0"
Database user ID.. "SAPAD0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jun 23 2008 00:09:46"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.018 CL 119055 "
Patch level. 166
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 40960
MM Used. 1627776
MM Free. 2559440
User and Transaction
Client.............. 040
User................ "LAKSHMI"
Language key........ "E"
Transaction......... "MIGO "
Transactions ID..... "EE72C6DDC96BF1F99FA4001143E563CA"
Program............. "CL_EX_MB_MIGO_BADI============CP"
Screen.............. "SAPLMIGO 0001"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "CL_EX_MB_MIGO_BADI============CP" -
in "IF_EX_MB_MIGO_BADI~INIT".
The main program was "SAPLMIGO ".
In the source code you have the termination point in line 1
of the (Include) program "CL_EX_MB_MIGO_BADI============CM001".
Source Code Extract
Line SourceCde
>>>>> method IF_EX_MB_MIGO_BADI~INIT.
2 CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
4 DATA l_badi TYPE REF TO MB_MIGO_BADI.
5
6
7
8
9
10 TRY.
11
12 GET BADI l_badi
13 CONTEXT me.
14
15 CALL BADI l_badi->INIT
16
17 CHANGING
18 CT_INIT = CT_INIT.
19
20
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE
SY-MSGTY S
SY-MSGID VBDOCUBATCH
SY-MSGNO 001
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20081210
SY-UZEIT 082802
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
4 METHOD CL_EX_MB_MIGO_BADI============CP CL_EX_MB_MIGO_BADI============CM001 1
CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
3 METHOD SAPLMIGO LMIGOGL2 54
LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
2 FORM SAPLMIGO LMIGOIN1 11
INITIALIZATION
1 MODULE (PBO) SAPLMIGO LMIGOPBO 11
PBO_INITILIZATION
Chosen variables
Name
Val.
No. 4 Ty. METHOD
Name CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
CT_INIT
Table[initial]
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
CL_EX_MB_MIGO_BADI============CP
4454554454444544443333333333334522222222
3CF58FD2FD97FF2149DDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
0
0000
0000
No. 3 Ty. METHOD
Name LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
SY-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>CNTL_ERROR
2
0
0
0
ABAP_FALSE
2
0
0
0
SYST-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
GOSEARCH_PO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TEXT-220
Dest
46772222
45340000
00000000
00000000
%_SPACE
2
0
0
0
%_TAG*TS_GOITEM
<initial>
<initial>
<initial>
X
X
5
8
0
0
LCL_MIGO_GLOBALS=>IF_BADI
F0000000
70008000
%_FL2*TV_GOFREIGHT
<initial>
<initial>
<initial>
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>T_BADI
Table[initial]
/SPE/CL_INB_ACTION_INFO=>C_DIALOG_MIGO
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OREF_TITLEBAR
F0000000
F0000000
L_BADIS_1
0
0000
0000
SY-MSGID
VBDOCUBATCH
54444544544222222222
624F3521438000000000
00000000000000000000
00000000000000000000
OREF_TIP
F0000000
F0000000
TV_GOSERIAL-CX
<initial>
<initial>
<initial>
SPACE
2
0
0
0
SY-MSGNO
001
333
001
000
000
No. 2 Ty. FORM
Name INITIALIZATION
OREF_ARCH
F0000000
F0000000
LCL_MIGO_GLOBALS=>KERNEL
F0000000
D0002000
%_CX_TABLEVIEW_VERSION
0
3
0
0
0
GODEFAULT-DEF_XBOM
2
0
0
0
LCL_MIGO_GLOBALS=>KERNEL->C_REFDOCTYPE_MATDOC
MAT
445
D14
000
000
No. 1 Ty. MODULE (PBO)
Name PBO_INITILIZATION
GOITEM-UMWRK
2222
0000
0000
0000
GOITEM-UMNAME1
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_genprog"
of the SAP kernel, in line 1551 of the module
"//bas/700_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CPOP".
Internal mode was started at 20081210082802.
Program name.........: "MB_MIGO_BADI==================CP ".
Error message........: "The specified type cannot be converted into the target
variables.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=5776)
When : 12/10/2008 8:28:3.84
Threads : 2
Computer Name : DMATE
User Name : SAPServiceAD0
Number of Processors: 4
Processor Type: EM64T Family 15 Model 4 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 14f0
FramePtr ReturnAd Param#1 Function Name
0000000007eb8800 0000000077d7047f 00000000411b4070 ntdll!NtWaitForSingleObject
0000000007eb88a0 000000000173b1d1 000000000000042c kernel32!WaitForSingleObjectEx
0000000007eb8af0 00000000006179c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0000000007eb8b20 0000000000b05d9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
0000000007eb8b70 0000000000b0afc0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7093)]
0000000007eb9550 0000000000a51c94 0000000001d12320 disp+work!ab_rabax [abrabax.c (1231)]
0000000007ebc220 00000000007f753a 0000000000000001 disp+work!ab_genprog [abgen.c (1555)]
0000000007ebc2f0 00000000007f7dc8 00000000ffffffff disp+work!newload [abload1.c (336)]
0000000007ebc350 00000000007f7e8e 0000000000000056 disp+work!ab_LoadProgOrTrfo [abload1.c (160)]
0000000007ebc380 00000000007bc84d 000007fe725a5f70 disp+work!ab_LoadProg [abload1.c (78)]
0000000007ebc450 00000000007be91a 00002a441022f402 disp+work!LoadGlobalClass [abobject.c (943)]
0000000007ebc4a0 00000000007c1bdd 0000000000000000 disp+work!ab_FillCfix [abobject.c (1603)]
0000000007ebc580 000000000083ae52 0000000000000000 disp+work!ab_jaboo [abobject.c (2248)]
0000000007ebc700 0000000000a1ccb7 000000000000000d disp+work!ab_extri [abextri.c (554)]
0000000007ebc750 0000000000ad50ac 000000000000000d disp+work!ab_xevent [abrunt1.c (281)]
0000000007ebc7e0 0000000000679328 000000000000000d disp+work!ab_dstep [abdynpro.c (492)]
0000000007ebc960 000000000067d02d 000007fe725d6f20 disp+work!dynpmcal [dymainstp.c (2396)]
0000000007ebc9f0 000000000067ca2a 0000000000000000 disp+work!dynppbo0 [dymainstp.c (543)]
0000000007ebcaa0 00000000006395c5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
0000000007ebfc30 00000000004dbc4c 000000000000000c disp+work!dynpen00 [dymain.c (1646)]
0000000007ebfeb0 000000000042f096 0000000007f62ff0 disp+work!TskhLoop [thxxhead.c (4538)]
0000000007ebfee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1136)]
0000000007ebff10 00000000019e84b1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007ebff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007ebffa0 0000000000000000 00000000019e8340 kernel32!BaseProcessStart
State Dump for Thread Id b94
FramePtr ReturnAd Param#1 Function Name
000000000c9dfe40 0000000077d5f651 0000000000000000 ntdll!NtFsControlFile
000000000c9dfeb0 00000000018ce23f fffffffffffffffe kernel32!ConnectNamedPipe
000000000c9dff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000c9dff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000c9dffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPLMIGO 0 04.05.2008 12:54:34 1561600 E
1 Prg SAPMSSYD 0 25.02.2008 17:02:32 21504 E
2 Prg SAPFSYSCALLS 0 09.09.2004 14:18:32 7168 E
3 Prg CL_MMIM_USERDEFAULTS==========CP 3 06.05.2002 10:42:38 21504 E
4 Typ ESDUS 0 01.03.1999 13:36:04 2048
5 Typ GOHEAD 0 07.02.2006 10:07:36 11264
6 Typ MKPF 0 25.08.2005 22:02:19 7168
7 Typ KBEFU 0 16.03.2008 17:46:49 6144
8 Typ LFA1 0 16.03.2008 17:47:20 22528
9 Typ MIGO_CUST_ACTION 0 30.11.1999 10:19:14 3072
10 Typ MIGO_CUST_REFDOC 0 30.11.1999 10:19:14 2048
11 Typ X031L 0 05.07.2005 13:10:15 6144
12 Prg SAPLSDIFRUNTIME 12 19.11.2006 16:35:34 96256 E
13 Typ DFIES 0 28.12.2004 17:06:45 10240
14 Prg SAPLSDNT 14 09.03.2008 19:02:04 219136 E
15 Prg SAPLSUGS 15 31.03.2006 11:23:11 47104 E
16 Prg SAPLV01D 16 24.03.2008 17:03:30 40960 E
17 Typ IWRKZ 0 04.04.1995 15:56:46 2048
18 Typ TCUCH 0 07.01.2002 15:50:54 3072
19 Typ TCUBN 0 07.01.2002 15:50:53 2048
20 Typ TCUWS 0 13.08.1997 13:57:58 2048
21 Typ TCUDRV 0 07.01.2002 15:50:54 2048
22 Prg SAPLVBDOCUBATCH_BF 22 16.01.2004 14:28:56 10240 E
23 Typ TCUDB 0 14.01.2004 10:05:59 2048
24 Prg CL_GUI_CFW====================CP 24 28.02.2005 21:03:09 168960 E
25 Prg CL_GUI_PROPS_CONSUMER=========CP 25 18.03.2008 13:25:33 29696 E
26 Prg %_CCNTL 25 18.02.2005 14:15:08 15360 E
27 Prg SAPLTHFB 27 18.03.2008 13:24:52 394240 E
28 Typ EUDB 0 06.11.2003 20:28:08 8192
29 Typ TCURM 0 01.03.2005 10:56:26 5120
30 Prg CL_EXITHANDLER================CP 30 18.03.2008 13:11:35 30720 E
31 Prg SAPLSEXV 31 18.03.2008 13:12:58 117760 E
32 Typ SXS_ATTR 0 07.02.2006 10:09:24 5120
33 Typ BADIISIMPLED 0 19.05.2005 19:10:34 3072
34 Prg CL_ENH_BADI_TOOL_UTILITIES====CP 34 17.03.2008 11:03:36 13312 E
35 Typ BADI_MAIN 0 08.12.2004 18:01:11 2048
36 Typ BADI_IMPL 0 09.12.2004 19:05:43 3072
37 Typ TADIR 0 07.02.2006 10:08:38 5120
38 Prg CL_SWITCH=====================CP 38 17.03.2008 11:13:47 19456 E
39 Typ SFW_PACKAGE 0 07.03.2008 12:18:16 2048
40 Prg CL_ABAP_SWITCH================CP 40 14.10.2006 15:40:30 33792 E
41 Prg SAPLPA_PACKAGE_SERVICES 41 18.03.2008 13:12:54 152576 E
42 Typ TDEVC 0 08.12.2004 18:02:41 6144
43 Prg CL_EX_MB_MIGO_BADI============CP 43 05.12.2008 17:09:58 30720 E
44 Prg IF_EX_MB_MIGO_BADI============IP 30 19.05.2005 19:30:39 14336 E
45 Typ SYST 0 09.09.2004 14:18:12 31744
46 Typ GOSEARCH_PO 0 20.07.2001 19:17:34 4096
47 Prg /SPE/CL_INB_ACTION_INFO=======CP 47 24.03.2008 20:30:06 20480 E
48 Prg /SPE/IF_CONST=================IP 47 14.10.2006 18:49:02 7168 E
49 Typ GODEFAULT 0 14.01.2004 10:04:46 5120
50 Typ GOITEM 0 07.02.2006 10:07:36 65536
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPLMIGO
SYST . . : : 00004612
\0\0\0\0\x0001\0\x0370\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0
GOITEM . . : : 00005524
00000000000000000000
GOSEARCH_PO . . : : 00000492
GODEFAULT . . : : 00000220
Program SAPLV01D
TCUCH . . : : 00000122
0401100020061029095148ANOOPJ 00000000000000
TCUWS . . : : 00000060
040020061227101454CONSULTANT
TCUBN . . : : 00000060
040020061227101454CONSULTANT
TCUDRV . . : : 00000064
00000000000000
Program CL_GUI_PROPS_CONSUMER=========CP
EUDB . . : : 00004068
%CAA72C6DDAD55F1179FA4001143E563CA \0\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
94 BRAX 01 FFEB CL_EX_MB_MIGO_BADI============CM001 15
95 CLEA 00 0020 CL_EX_MB_MIGO_BADI============CM001 15
96 EXCP 08 0000 CL_EX_MB_MIGO_BADI============CM001 22
97 BRAX 00 0005 CL_EX_MB_MIGO_BADI============CM001 22
98 EXCP 00 0007 CL_EX_MB_MIGO_BADI============CM001 22
99 BRAX 00 0003 CL_EX_MB_MIGO_BADI============CM001 22
100 EXCP 07 0000 CL_EX_MB_MIGO_BADI============CM001 22
101 BRAX 00 0001 CL_EX_MB_MIGO_BADI============CM001 23
102 EXCP 0B 0000 CL_EX_MB_MIGO_BADI============CM001 23
103 METH 01 0000 0000 0000 0000 0000 0000 0000 CL_EX_MB_MIGO_BADI============CM001 24
107 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 24
108 ABOO 02 0000 0005 0000 CL_EX_MB_MIGO_BADI============CM001 1
>>>>> CPOP 00 0000 CL_EX_MB_MIGO_BADI============CM001 1
111 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 1
112 METH 04 0000 0005 0002 0000 0003 0000 0000 CL_EX_MB_MIGO_BADI============CM002 1
116 PAR2 04 0000 C000 0000 CL_EX_MB_MIGO_BADI============CM002 1
118 PAR2 04 0000 C001 0000 CL_EX_MB_MIGO_BADI============CM002 1
120 PAR2 14 0000 C002 0000 CL_EX_MB_MIGO_BADI============CM002 1
122 PAR2 14 0000 C003 0000 CL_EX_MB_MIGO_BADI============CM002 1
124 PAR2 14 0000 C004 0000 CL_EX_MB_MIGO_BADI============CM002 1Hai,
Seems to be problem with the Program.
Please check the point 'What Happened' in the dump for more details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
Take help from a ABAP consultant and try to check the syntax of the Program.
If you have access even you can check the syntax of the specified program from SE38.
Goto SE38 and put the program name and select 'Source code' and press F8, IN THE SOURCE CODE PAGE, press control+F2 and check whether there is any problem with the syntax or not.
If you find any take help from ABAP consultants.
Hope this helps.
Regards,
Yoganand.V -
In SMARTFORMS when openee a Text Node, Giving a Short Dump
Hi
I am getting Short Dump in SMARTFORMS Transaction, when ever I opened a Text Node and made some changes in it.
With out opening a Text Node I can able to change and activate the SmartForm.
But if I open a Text Node I can able to make changes in the Text Node but later if i click on any other Node, it is giving a Short Dump.
But all other systems in my office are working fine.
I have tried the Utilities->Settings-> and changed the editor also.
I have also Installed the SAPGUI once again for this Issue. But still I am getting the same problem.
Can anyone Please help me on this Issue.
I am sending the error enalysis of the Short Dump.
Error analysis
Short text of error message:
Control Framework : Error processing control
Long text of error message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
system
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Technical information about the message:
Message class....... "CNDP"
Number.............. 006
Thanks in Advance.Hi
I think dump is because of SAP GUI. If you are ECC 6.0 then install SAP GUI 710 with patch level 2 or more and check
Regards
Shiva
Maybe you are looking for
-
USE OF CATS IN Negative time management scinario
Hi Friends, I need your guidance on following points 1) Is there any relevance of using CATS in negative time management. 2) If we have to use CATS in negative time management what should be the time management status o or
-
Lightroom hangs on editing Preferences
Every time I try to edit the Preferences, LR5.4 (64 bits) hangs and Windows (8.0) says that he will close the program. The rest of LR works fine (except editing with Nik plugins), so I do not know what to do. Any Clue? Agustin
-
I am unable to browse my album covers
I am unable to browse my album covers in itunes. What can I do to resolve this problem
-
VKM1 not showing consignment orders
VKM1 not showing drop ship consignment fill up orders. We use Item Category ZTSP ( 3rd party item cateogry with Credit active check in VOV7) for KB ( consignment fill up) orders. Once after order created, system is doing automatic credit check and it
-
Windows doesn't detect Zen V Plus he
I've just purchased the Creative Zen V Plus 4gb for my girlfriend but windows doesn't want to detect it, I have followed the?online suggestions with no?luck. It shows in my device manager but with an exclamation mark next to it, I've tried re-install