Short dump in BW for CRM load

Experts,
This is a strange situation. After upgrade to CRM 5.0, I have noticed that if we try to create or open info package to load data from CRM opportunity to BW, gives ABAP short dump and pointing to some delta load error. So, I don't get opportunity to reinit. delta load that way. It seems like source system has some issue that gives dump before even we open info packae to load data. I have ckecked RSA7 and RSA3 in CRM and found no problem at all. Tried to restore and activate and replicate data source into BW. Activated Transfer rule and Transfer structure. Nothing helped.
Can anybody suggest me anything please? Thanks.
Regards,
Nimesh

Hi NP
Please check the connectivity between CRM and BW systems. Go to source sytems and make sure that CRM system client is in active state or not? Go to sm59 and check with your source system is Unicode. If every thing is ok,then it is not a problem with systems. Serach for related SAP notes and apply that note with Transaction code: Snote. Hope this will help you,if yes assign some points
Regards
sriman

Similar Messages

Getting short dump at the time of loading data from R/3 to ODS

Hi BW Grurus,
I am trying to load data from R/3 to ODS, but after running for a few minutes it is getting into the short dump and displays the following run time error. So please give me solution how I can load data without getting short dump. I tried thrice but it is giving the same and failed.
Run time error : TSV_TNEW_PAGE_ALLOC_FAILED

Hi,
Check, is start routine or individual routine in present in update/transfer rule?
May be read large amount data (select * from) another ODS and put into internal table cause these type of error.
Regards,
Saran

Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data

Hi All,
I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if you have faced the same problem previously?
Termination occurred in the ABAP program "SAPLRSW0" - in
"RSW_CURRENCY_TRANSLATION".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 86
of the (Include) program "LRSW0U09".
The program "SAPLRSW0" was started as a background job.
I have checked the DSO routines and objects, everything is ok. Replicated all currency conversion tables from source.
0PSTNG_DAT infoobject is also active. There is no errors in Development while loading, when moved to quality, the error is throwing.
Regards,
Don

Hi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don

Short dump in EXIT for ME21N

Hi,
In PO creation (ME21N/ME22N), i wanted to call custom report, mean while I have implemented one exit
"MM06E005 ->EXIT_SAPMM06E_006", in that, I called Z-program, in which a statement
call screen 100.
is there, which is causing the short dump.
Short dump Details:
The system attempted to use dynpro 0100 in program "SAPLXM06".
This dynpro does not exist.
In the same manner, if I call another function module it is not happening.
Please suggest me.

My actual Intension is to popup a screen with a report in ME21N(PO creation), for that I have generated one normal report and called that report from the Exit I have told previously, In that report I have created 100 screen and called it.
When I am creating a PO, the screen calling statement there, is throwing a short dump.
Hope now you understood Everything.
Thank you for responding.

Problem in SAP extractor for CRM - BW extraction.

Hi Gurus,
I am facing a problem loading master data for 0CRM_MKTELM (CRM Marketing Elem.). It's a Repair full load without any selection.
Its failes by saying : Job terminated in Source system.
When we cheaked in source system i.e. CRM system , we found a short dump in ST22 for the same. Which mentioned TSV_TNEW_PAGE_ALLOC_FAILED.
We tried to load the infopackage by reducing its settings of Maximum size of a data packet in kByte & Maximum number of dialog processes for sending data. It worked for few days but today it failed again for the same reduced settings.
Please suggest.
Thanks in advance,
Sourabh Deo

Hi,
The issue with the memory allocation only... as you have tried the info-package with more selection that is the best approach... u can try putting more selection in the info-packages...
Also, see if basis can help to increase the memory parameters

Short dump while executing info package in 3.5 data flow?

Hi,
i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
Please find attached short dump.
Thanks

Hi,
When you load transaction data I think there is a deadlock.
Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
The program SAPLSENA is the lock handler tool.
Also check if ACR is running on this target while your load is happening.
Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
Try reloading after deleting the locks manually.
Regards.

BI Content Install SHORT DUMP

HELP!
I am trying to install BI Content on a newly installed netweaver Box. We are running BI 7.0 with SP 15 and BI_CONT 703 SP 5. This is the error:
Runtime Errors         ASSIGN_LENGTH_0
Date and Time          2008/02/18 12:55:36
Short dump has not been completely stored (too big)
Short text
     Program error: ASSIGN with length 0 in program "SAPLSNR3".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSNR3" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     Tried to create a field with length 0. This is not
     possible.
Error analysis
     In an ASSIGN statement in the program "SAPLSNR3" a field symbol with
     length 0 should have been created. However, this is not possible.
     length 0.
     This is not possible.
Trigger Location of Runtime Error
     Program                                 SAPLSNR3
     Include                                 LSNR3F01
     Row                                     178
     Module type                             (FORM)
     Module Name                             LOCAL_BUFFER
Line SourceCde
148                  ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
149   IF SY-SUBRC .
180 *       Funktionsbaustein kann beendet werden
181     P_EXIT = YES.
182     EXIT.
183
184   ELSEIF SY-SUBRC = 4.
185 *       Das Intervall wurde nicht gefunden
186     MESSAGE E751 RAISING INTERVAL_NOT_FOUND WITH P_OBJECT P_SUBOBJECT
187                                    P_NR_RANGE_NR TNRO-CODE.
188   ELSEIF SY-SUBRC = 19.
189 *       Der Nummernkreis ist nicht intern
190     MESSAGE E752 RAISING NUMBER_RANGE_NOT_INTERN.
191   ELSEIF SY-SUBRC = 15.
192 *       Overflow
193         IF NOT TNRO-NONRSWAP IS INITIAL.
194            MESSAGE E028 WITH BNRIV-FROMNUMBER BNRIV-TONUMBER
195                           P_OBJECT RAISING INTERVAL_OVERFLOW.
196         ENDIF.
197   ELSEIF SY-SUBRC = 11.

Problem:
When trying to collect BI objects prior to installing (activate) for use in BI (TCODE: RSA1) a short dump would be thrown when 'in and out' objects were selected. No short dump was thrown for demo objects when source system was set to local.
Reason:
The objects tracking sequence numbers for incoming BI transports from external systems were not correctly set. The sequences should have been set with a valid range of 1 to 9999999999 however the sequences were either missing or set to 0. This was a problem with the BI server (EPSAND), the CRM server was functioning correctly.
Why this happened:
Unknown. Perhaps a bug in a service pack. This error appears to be very uncommon. The error being thrown was a generic error thus difficult to trace to the actual problem.
How the problem was fixed:
(1) Using TCODE: SNUM set intervals for objects: BI_TS, BI_TSDTEL, BI_TSDOMA and BI_CS. These objects should each be set as follows:
No. From Number To Number Currenct Number
01 0000000001 9999999999 1
(2) Then there was also a second unrelated bug which is fixed in latest SAP_BW support package (SP 0014, released: January 2008). We couldn't risk the support package so a single note: 1102743 was applied.

Short dump GETWA_NOT_ASSIGNED - Field symbol FS_ENVDLIST not assigned

Hi Experts,
I need your help. Currently i am getting a short in CIC0 transaction.
Please find steps executed which result in short dump.
Search for a BP with BD display as the active tab. This search will be successful.
Press u2018End Contactu2019 Now search for 2nd BP with BD display as the active tab.
This will result in a dump.
Now if I again execute the t-code CIC0 & enter the same BP it will be successful
On debugging, I found out that the program cannot identify the data environment since the field symbol <fs_envdlist> does not get assigned when BD_DISPLAY tab is active. But the program still continues to use this field symbol which results in a dump
CRM Version - 4.0 - Patch level 10
Please let me know if the below link is not accessible
[http://imageshack.us/photo/my-images/685/page3uk.jpg/]
[http://imageshack.us/photo/my-images/338/page2dr.jpg]
[http://imageshack.us/photo/my-images/510/page1up.jpg/]
[http://imageshack.us/photo/my-images/140/page4fa.jpg/]
[http://imageshack.us/photo/my-images/845/screenshotsxq.jpg/]

Hi Andrei,
Thank you for the reply, but both this note are applicable to me
1144076 u2013 Talks about dump when too many hits are returned - I do not have any such message
996915 u2013 Talks about searching for the premise for a point of delivery without entering any search parameters - again in my scenario, input data is always provided.
Is there any solution, i did get note 1254404 which is closest to my issue, but its valid from crm 5.0 and we are on CRM 4.0

Regular short Dumps

Hi,
We are facing short dumps very regularly for some particular ODS and cubes.
Every time we have to go for reconstruction or manual update.
I have some questions in mind:
1. Why do we encounter short dump? Is this an ABAP issue or BASIS issue
2. If its an issue with ABAP programs, how come the load is successful when I do reconstruction or manual update from PSA?
Thnks & rgds
AP

Hi AP,
Apart from the Above mentioned errors.
Common Errors:
Few of them are here:
1) RFC connection lost.
A) We can check out in the SM59 t-code
RFC Des
+ R/3 conn
CRD client (our r/3 client)
double click..test connection in menu
2) Invalid characters while loading.
A) Change them in the PSA & load them.
3) ALEREMOTE user is locked.
A) Ask your Basis team to release the user. It is mostly ALEREMOTE.
2) Password Changed
3) Number of incorrect attempts to login into ALEREMOTE.
4) USE SM12 t-code to find out are there any locks.
4) Lower case letters not allowed.
A) Uncheck the lower case letters check box under "general" tab in the info object.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
A) It might be locked by some other process or a user. Also check for authorizations
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic ZCUSTSAL already deleted .
9) extraction job aborted in r3
A) It might have got cancelled due to running for more than the expected time, or may be cancelled by R/3 users if it is hampering the performance.
10) request couldnt be activated because there is another request in the psa with a smaller sid
A)
11) repeat of last delta not possible
12) datasource not replicated
A) Replicate the datasource from R/3 through source system in the AWB & assign it to the infosource and activate it again.
13) datasource/transfer structure not active.
A) Use the function module RS_TRANSTRU_ACTIVATE_ALL to activate it
14) ODS activation error.
A) ODS activation errors can occur mainly due to following reasons-
1.Invalid characters (# like characters)
2.Invalid data values for units/currencies etc
3.Invalid values for data types of char & key figures.
4.Error in generating SID values for some data.
Help on "Remedy Tickets resolution"
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
https://forums.sdn.sap.com/click.jspa?searchID=678788&messageID=1842076
Production Support
Production support issues
Hope This Helps.
Regards,
Ravikanth.

Short dump SAPLSLVC_FULLSCREEN in ALV mode

Hi all
I encountered a short dump in production after i load a text file in my customised program. I did not encountered such error in DEV and UAT. This dump occurs when i add or remove the columns in ALV mode.
Runtime Error          PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
       Occurred on     22.05.2008 at   15:02:44
Call (PERFORM) to a non-existent routine.
What happened?
The current program attempted to call an externally defined routine
that does not exist.
Error in ABAP application program.
The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because one
of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because the
ABAP
processor discovered an invalid system state.
Can anyone kindly advice? Thanks.

** WA-NAME = 'TOP_OF_PAGE'.             "'SLIS_EV_TOP_OF_PAGE'.
** WA-FORM = 'TOPOFPAGE'.
** APPEND WA TO T_EVENTS.
** WA-NAME = 'END_OF_PAGE'.
** WA-FORM = 'ENDOFPAGE'.
** APPEND WA TO T_EVENTS.
** WA-NAME = 'END_OF_LIST'.
** WA-FORM = 'ENDOFLIST'.
** APPEND WA TO T_EVENTS.
please comment like this code in your code..

DSWP short dump problem

Hello
I have installed new SP 25 with ABAP and JAVA on my client SOLMAN sistem. After that i have reconfigured solman_setup . When i enteren DSWP screen and click Sap solution it shows me up and short dump screen;
Runtime Errors         SYNTAX_ERROR
Date and Time          10.03.2011 14:55:55
Short text
     Syntax error in program "SAPLCRM_ORDER_OW ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLCRM_ORDER_API" had to be terminated because it
      has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLCRM_ORDER_OW " in include
      "LCRM_ORDER_OWU08 " in
     line 1359:
     "Different number of parameters in FORM and PERFORM (routine: READ_ITEM"
     "_EXT, number of formal parameters: 32, number of actual parameters: 31"
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
     Error in the ABAP Application Program
     The current ABAP program "SAPLCRM_ORDER_API" had to be terminated because it
      has
     come across a statement that unfortunately cannot be executed.
Error analysis
    The following syntax error was found in the program SAPLCRM_ORDER_OW :
    "Different number of parameters in FORM and PERFORM (routine: READ_ITEM"
    "_EXT, number of formal parameters: 32, number of actual parameters: 31"
Trigger Location of Runtime Error
    Program                                 SAPLCRM_ORDER_API
    Include                                 LCRM_ORDER_APIU01
    Row                                     21
    Module type                             (FUNCTION)
    Module Name                             CRM_ORDER_INITIALIZE
Source Code Extract
Line SourceCde
    1 FUNCTION crm_order_initialize.
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *" IMPORTING
    5 *"     REFERENCE(IT_GUIDS_TO_INIT) TYPE CRMT_OBJECT_GUID_TAB OPTIONAL
    6 *"     REFERENCE(IV_INITIALIZE_WHOLE_BUFFER) TYPE CRMT_BOOLEAN
    7 *"       OPTIONAL
    8 *"     REFERENCE(IV_INIT_FRAME_LOG) TYPE CRMT_BOOLEAN OPTIONAL
    9 *"     REFERENCE(IV_LOG_HANDLE) TYPE BALLOGHNDL OPTIONAL
   10 *"     REFERENCE(IV_KEEP_LOCK) TYPE CRMT_BOOLEAN DEFAULT FALSE
   11 *" EXCEPTIONS
   12 *"      ERROR_OCCURRED
   13 *"----
   14
   15 * Debug functionality for external calls of One Order APIs
   16   include crm_trace_initialize.
   17
   18 * Initialize business partner buffer
   19   CALL FUNCTION 'BUP_BUFFER_INIT'.
   20
>>>>>   CALL FUNCTION 'CRM_ORDER_INIT_OW'
   22        EXPORTING
   23             it_guids_to_init           = it_guids_to_init
   24             iv_initialize_whole_buffer = iv_initialize_whole_buffer
   25             iv_init_frame_log          = iv_init_frame_log
   26             iv_log_handle              = iv_log_handle
   27             iv_keep_lock               = iv_keep_lock
   28        EXCEPTIONS
   29             OTHERS                    = 1.
   30
   31   IF sy-subrc NE 0.
   32     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
   33             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
   34             RAISING error_occurred.
   35   ENDIF.
   36
   37 ENDFUNCTION.
Whats is the problem?
Thank you
Fatih

Hello,
Have you checked SAP Note 1168593 - Short dumps in 'CRM_ORDER_READ_OW' for multiple
pricing cond" to see if it is applicable to your Release and SP levels?
Regards,
Paul

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

Initial customizing loads (DNL_*) causing short dumps in R/3

Hi,
I'm trying to run the initail loads for the DNL_* customizing objects. When I start a load in R3AS and check the status in R3AM1, it shows "Running". In the CRM oubound queue (SMQ1), there is an entry for the load with status SYSFAIL. The detailed status message is "The current application triggered a termination with a short dump".
The short dump in R/3 shows an error "No external system (such as CRM) connected" which occurs in function module CRM_FIRST_CALL_OPERATIONS. Looking at the code, there seems to be a problem with the CRMRFCPAR table. I had only one record in this table for object CUSTOMER_MAIN, so I tried adding a record with Object Name "*" and Load Type "I", but this had no effect.
What is the proper configuration of table CRMRFCPAR for customizing loads? Is it possible that this error is related to some other config or a problem with the RFC connection? These loads work fine in our quality system which is configured the same as production (as far as I can tell).
Thanks.
Martin

hi,
Maintaining Table CRMRFCPAR (SAP R/3)
The parameters in this table indicate the RFC destinations which receive data. The required parameters include, for example: consumer, client, object name, and download type.
You can send data to a certain consumer only in an initial download and not in a delta download by making the appropriate specifications for the data exchange.
User- That uses the OLTP plug-in functions as data receivers
Object name -Object name
Destination -Specifies the destination of the CRM server
Load Type -Restricts CRMRFCPAR entries to the initial (I) or delta (D) download.
Out Queue - Name RFC outbound queue
In Queue -Name RFC inbound queue
BAPI name
INFO -Information/Comments
InQueue flag- Controls whether qRFC inbound queues are used on the CRM server
Send XML -XML supports (Should data be sent in XML format?)
Stop data -Causes the OLTP System to place data into the outbound queue.
Regards
sri

Short dump "Time limit exceeded" when searching for Business Transactions

Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
Bala

Hi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala

Short dump in report generation for bex query

Hi,
I have e newly installed SAP NetWeaver 7.3 and I'm not able to run BEx-Queries. When I start transaction RSRT and try to generate the report for the selected bex query, I get the following short dump:
Category               ABAP Programming Error
Runtime Errors         RAISE_EXCEPTION
ABAP Program           SAPLRRSI
Application Component BW-BEX-OT
If I start the test in RSRV for that query I get:
Generation limits for the generated report
Unable to load report GPEM3XZBL2Y9VX9H6SN
Am I missing a profile parameter for that generartion limits or something else?
Thanks in advance!

Hi,
Check whether your SAP GUI is activated and installed correctly.
check following threads
Runtime error RAISE_EXCEPTION has occurred
Dump when activating Business Content 7.35
Thanks and regards
Kiran

Short dump in BW for CRM load

Similar Messages

Maybe you are looking for