Short dump in Production system !!!
Hi Experts,
We have getting a short dump for all actions in Production system. Suppose if we use se38 and tried to press display it shows a short dump error. Despite when we tried to use tcodes or using LSMW or try to execute a program or like this all type of actions its throws a short dump error. Dont know what is the reason behind that since the short dump is not the defined the reason for the dumb. Have any of you experts got this type of experience?. Pls give your ideas. Thanks in advance.
Hello Kavi,
Contact your basis team. SNAP is a table which holds all ABAP dump. It looks like SNAP table is full and cannot accomodate new entries.
In any production enviornment, the SNAP entires will be deleted regularly and only dumps for the last 8 days will be available
Check if any job(SM36 or table tbtcp) is running for this program RSSNAPDL in your production system.
Thanks
Similar Messages
-
CX_SY_FILE_OPEN_MODE - short dump on production but not in Dev and Test
Hello,
I'm getting the follwoing short dump in production when I run the program which writes the data to application server. I have open data set and close data set. Same program when I in development and test I do not get any short dump. Can any know what could be cause for this.
CX_SY_FILE_OPEN_MODE
Copy paste of error analysis from ST22 short dump -
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
caught in
procedure "DATA_UPLOAD_APP_SERVER" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When accessing the file "/bw/FTPOUT/BPR/OTHER/test.csv", the system recognized
that this file is
not open. Therefore, the file cannot be accessed.The file could not be OPENed in your production system for a variety of reasons - no authorization, file doesn't exist etc. You should have check sy-subrc right after OPEN DATASET and if not zero, yous should not TRANSFER or READ the file and instead you should have given a message with sy-msgid and sy-msgno which would give you the reason. The dump here is simply saying that OPEN is unsuccessful, so any subsequent READ or TRANSFER would throw runtime dump, if done after an unsuccessful OPEN.
-
Dump in production system :Incorrect status in pricing
Hi All,
We have patched out SRM5.5 server system recently with 15 and 16 patch.
After the patch we are getting many dums in production system.
When i check in the ST22 ,the error syaing that
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
*Incorrect status in pricing*
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
"SAPLBBP_PDH" or "LBBP_PDHU08"
"BBP_PD_ABORT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
and i have checked the IPC ,it is also active only,.
We have got his issue all of suddenlly,
Can any one tell us what could be the issue.
Regards
cbHi All,
thanks a lot for your response ,
I have done the Simulation which shows everything is fine and i have chcked with BBP_CND_CUSTOMIZING_CHECK t-codes even that is also correct only .
we are plannning for rasing the issue with SAP.
Besides that the system might have activated the BADI simple pricing active (or something like that). This would give trouble as well with the IPC (they can't both be active).
@Robin which the badi we can check.
once agina thanks a lot for your replys.
Regards
cb -
Hello Friends,
I have a z table and it is working fine in development and quality system and it is giving short dump error when I try to maintain the same table in production using SM30 tcode. Please suggest me what would be the issue here?
Thanks,
ShreekantPlease delete the existing table maintenance view and regenerate the same.
1. SE11 > Table Name > MODIFY
2. Menu.. UTILITIES > Table Maintenance Generator
Keep a screen shot of this screen for future use.
3. Click on DELETE in Apps tool Bar
Then regenerate the Table Maintenance View, as usual.
Regard
Vishal -
Short dump on production server
ABAP runtime errors GETWA_NOT_ASSIGNED
Occurred on 28.12.2007 at 11:16:11
>> Short dump has not been completely stored. It is too big.
Field symbol has not yet been assigned.
What happened?
The current ABAP/4 program "SAPLCEI0 " had to be terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
You attempted to access an unassigned field symbol
(data segment 2941).
This error occurs:
- if you address a typed field symbol before it has been set with
ASSIGN or
- if you address a field symbol that has been reset with UNASSIGN
or pointed to a local field that no longer exists, or
- if you address a field symbol that pointed to a line of an internal
table that has now been deleted, or
- if you address a global function interface partameter, even
though the relevant function module is not active,
i.e. it is not in the list of active calls. You can get the list
of active calls from the this short dump.
How to correct the error
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"GETWA_NOT_ASSIGNED"
"SAPLCEI0 " or "LCEI0U29 "
"CEI0_DDB_HAS_VALUES_INTERNAL"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "SAPCLUN"
Network address.......... "172.18.112.20"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "16x Intel 80158"
Database server.......... "DBCLUN"
Database type............ "MSSQL"
Database name............ "PRD"
Database owner........... "dbo"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Apr 9 2006 21:37:58"
Created in............... "NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00"
Database version......... "SQL_Server_7.00 "
Patch level.............. "2225"
Patch text............... " "
Supported environment....
Database................. "MSSQL 6.5.213 or higher, MSSQL 7.0.1 or higher"
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : "
User, transaction...
Client.............. 400
User................ "QPBASIC"
Language key........ "E"
Transaction......... "QA02 "
Program............. "SAPLCEI0 "
Screen.............. "SAPLQPL1 0200"
Screen line......... 34
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLCEI0 " in
"CEI0_DDB_HAS_VALUES_INTERNAL".
The main program was "SAPLQPL1 ".
The termination occurred in line 49
of the source code of program "LCEI0U29 " (when calling the editor 490).
Source code extract
000190 *" EXCEPTIONS
000200 *" NOT_FOUND
000210 *"----
000220
000230 DATA:
000240 ls_charac TYPE api_char,
000250 lt_charac TYPE STANDARD TABLE OF api_char,
000260 ls_vali TYPE api_vali.
000270
000280 DATA: ls_mi TYPE ts_mi,
000290 ls_wi TYPE ts_wi,
000300 ls_icv TYPE ts_value,
000310 ls_defval TYPE ts_defval,
000320 ls_inco_val TYPE ts_inco_val,
000330 ls_char_list TYPE ts_char_list,
000340 lv_subrc TYPE sy-subrc,
000350 lv_kntype TYPE cukntype.
000360
000370 data: ls_vallist TYPE ddb_c04, "676840
000380 lt_vallist TYPE STANDARD TABLE OF ddb_c04, "676840
000390 ls_restrict type ddb_c03, "699141
000400 lt_restrict type STANDARD TABLE OF ddb_c03, "699141
000410 lv_rflag type c. "676840
000420
000430 *----
000440 REFRESH exp_values.
000450
000460 DESCRIBE TABLE imp_characteristics LINES sy-tfill.
000470 IF sy-tfill EQ 0.
000480 LOOP AT
INTO ls_char_list.
000500 ls_charac-atinn = ls_char_list-atinn.
000510 APPEND ls_charac TO lt_charac.
000520 ENDLOOP.
000530 ELSE.
000540 lt_charac = imp_characteristics[].
000550 ENDIF.
000560
000570 LOOP AT lt_charac
000580 INTO ls_charac.
000590 IF ls_charac-atnam NE space.
000600 * input: name
000610 PERFORM read_mi_with_atnam
000620 USING
000630 ls_charac-atnam
000640 CHANGING
000650 lv_subrc
000660 ls_mi.
000670 ELSE.
000680 * input: atinn
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 0 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+....4
PROP_BITMAP 310
3000
6100
ALLOWED_VALUES
2
0
PROP_WIDTH 300
2000
C100
ASSIGNED_VALUES X
5
8
TOP_WINDOW 33
2000
1000
ASSIGNED_VALUES_API_DI
2
0
PROP_INDEX 350
5000
E100
DEFAULT_VALUES
2
0
DYNPRO_9 19
1000
3000
DEFAULT_VALUES_API_DN
2
0
DYNPRO_8 18
1000
2000
DEFAULT_VALUES_API_ST
2
0
DYNPRO_7 17
1000
1000
DOCUMENT_INFO
2
0
PROP_SOUND 340
5000
4100
FIRST_ASSIGNED_VALUE
2
0
PROP_TEXT 330
4000
A100
INCONSISTENT_VALUES
2
0
LANGUAGE E
4
5
SY-LANGU E
4
5
PROP_BITMAP_STYLE 320
4000
0100
VALID_VALUES
2
0
PROP_FONT_SIZE 380
7000
C100
EXP_VALUES[] #########################À##°###########
0000000000000000000000000C00B00000000000
00000000000000000000000040000A0000000000
... + 40 ################ÿÿÿÿ####################
0000000000000000FFFF00000000000000000000
1000000000001000FFFF81007000430000000000
... + 80 ################################
00000000000000000000000000008000
00000000000000000000000000004100
PROP_ITEM 370
7000
2100
IMP_CHARACTERISTICS[] #########################À##############
0000000000000000000000000C00800000000000
00000000000000000000000040000A0000000000
... + 40 ################ÿÿÿÿI###################
1000000000000000FFFF40000000000000000000
0000000000000000FFFF90002000430000000000
... + 80 ################################
00000000000000000000000000008000
00000000000000000000000000005100
SCREEN-ACTIVE 0
3
0
SY-XPROG SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
TVS_EDITLABELS 6
0000
6000
SY-TFILL 0
0000
0000
INCL_PRICE 0000
3333
0000
LS_CHAR_LIST 00000000000000000000
3333333333333333333322222222222
0000000000000000000000000000000
RSJOBINFO 00000000
2222222222222222222222222222222233333333
0000000000000000000000000000000000000000
... + 40 000000
3333332222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 ####
0000
0000
SYST ########################################
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 40 ####################################I###
0000000000000000000000000000000000004000
1000100010000000100000000000000000009000
... + 80 ########################################
0000000000000000100000000000000000000000
0000000000000000E00000000000000000000000
... + 120 ####################################p###
00000000
0000000
LT_CHARAC Table[initial]
0000FFFD
0000FFFF
LS_CHARAC 0000000000
3333333333222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
222222222222222222222222222222222
000000000000000000000000000000000
SPACE
2
0
Active calls / events
No.... Type........ Name..........................
Programm
Include Line
1 FUNCTION CEI0_DDB_HAS_VALUES_INTERNAL
SAPLCEI0
LCEI0U29 49
2 FUNCTION QMCF_CONFIGURATION_READ
SAPLQMCF
LQMCFU02 61
3 FUNCTION QMCF_SPECIFICATION_CONFIG_READ
SAPLQMCF
LQMCFU01 60
4 FUNCTION QPAP_PLAN_READ
SAPLQPAP
LQPAPU02 297
5 FUNCTION QEEV_TABLES_GENERATE
SAPLQEEV
LQEEVU01 118
6 FORM MERKMALSSAETZE_ANLEGEN
SAPLQPL1
LQPL1F12 85
7 FORM ST_RECHNE_571
SAPLQPL1
LQPL1F1L 26
8 FORM OK_PROBENBERECHNUNG
SAPLQPL1
LQPL1F1W 23
9 FORM FCODE_BEARBEITEN
SAPLV00F
LV00FF0F 97
10 FUNCTION SCREEN_SEQUENCE_CONTROL
SAPLV00F
LV00FU02 46
11 FORM FCODE
SAPLQPL1
LQPL1F2D 61
12 MODULE (PAI) FCODE
SAPLQPL1
LQPL1I0P 11
Internal notes
The termination occurred in the function "getwa_abswa" of the SAP
Basis System, specifically in line 1003 of the module
"//bas/46D/src/krn/runt/abgetwa.c#20".
The internal operation just processed is "LOOP".
The internal session was started at 20071228111310.
Active calls in SAP kernel
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=500)
When : 12/28/2007 11:16:13.65
Threads : 2
Computer Name : ELEPRDCI
User Name : prdadm
Number of Processors: 16
Processor Type: x86 Family 15 Model 4 Stepping 8
Windows Version : 5.2 Current Build: 3790
Stack Dump for Thread Id a5c
eax=00000000 ebx=000003a8 ecx=00000e58 edx=00000000 esi=000003a8 edi=00000000
eip=7c82ed54 esp=03138cc4 ebp=03138d34 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:03138cc4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:40cd7cc3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
03138d34 77e6ba12 000003a8 0001d4c0 00000000 03138d6c ntdll!KiFastSystemCallRet
03138d48 00baaa71 000003a8 0001d4c0 77bf1d88 00000002 kernel32!WaitForSingleObject
03138d6c 004d113b 004d10fc 77bf1d88 77bf1d88 77bf1d88 disp+work!
04b5ffb8 77e66063 00215740 00000000 00000000 00215740 MSVCRT!endthreadex
04b5ffec 00000000 77bcb4bc 00215740 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Type
Program
Gen. date time
LoadSize
Prg
SAPLQPL1
17.09.2006 09:35:11
479232
Prg
SAPMSSYD
14.08.2000 15:39:21
16384
Prg
SAPFSYSCALLS
21.12.1999 19:32:31
7168
Prg
CL_EXITHANDLER================
18.12.2004 13:14:45
13312
Prg
CL_ABAP_TYPEDESCR=============
04.01.2000 19:06:00
17408
Prg
CL_ABAP_ELEMDESCR=============
04.01.2000 19:06:00
13312
Prg
CL_ABAP_DATADESCR=============
04.01.2000 19:06:00
11264
Prg
CL_ABAP_REFDESCR==============
04.01.2000 19:06:00
14336
Prg
CL_ABAP_STRUCTDESCR===========
04.01.2000 19:06:00
16384
Prg
CL_ABAP_COMPLEXDESCR==========
04.01.2000 19:06:00
11264
Prg
CL_ABAP_TABLEDESCR============
04.01.2000 19:06:00
16384
Prg
CL_ABAP_CLASSDESCR============
04.01.2000 19:06:00
23552
Prg
CL_ABAP_OBJECTDESCR===========
04.01.2000 19:06:00
28672
Prg
CL_ABAP_INTFDESCR=============
04.01.2000 19:06:00
21504
Prg
IF_EX_INSPECTIONLOT_UPDATE====
13.07.2002 00:12:42
5120
Typ
SXS_INTER
30.11.1998 15:55:16
1024
Prg
SAPLSEXV
17.09.2006 08:50:01
155648
Prg
SAPLSXCH
18.12.2004 13:22:27
80896
Typ
V_EXT_ACT
14.10.1999 22:16:55
2048
Prg
CL_EX_INSPECTIONLOT_UPDATE====
13.07.2002 00:12:42
26624
Prg
SAPLV00F
08.03.2001 10:01:57
68608
Typ
T185E
15.07.1997 16:57:08
2048
Typ
T185F
14.08.1997 21:32:52
2048
Typ
T185
16.08.2000 11:43:40
3072
Typ
T185V
10.11.1999 17:45:26
4096
Typ
TQ01
14.02.1998 14:07:17
2048
Prg
SAPLSTXD
17.09.2006 08:53:44
406528
Prg
SAPCNVE
04.01.2000 19:06:37
7168
Prg
SAPLLANG
04.01.2000 19:06:49
9216
Prg
SAPLV01Z
17.09.2006 09:34:42
210944
Prg
SAPLCLFM
17.09.2006 09:34:56
688128
Prg
SAPLCUOB
17.09.2006 09:18:21
34816
Prg
SAPLCLSE
13.02.2005 06:50:14
177152
Prg
SAPLCTMS
17.09.2006 09:34:59
942080
Prg
SAPLCTCV
17.09.2006 09:27:23
192512
Prg
SAPLCTCF
12.02.2005 20:42:31
24576
Prg
SAPLV01P
17.09.2006 09:34:42
166912
Prg
SAPLMFAW
18.12.2004 14:02:28
51200
Typ
TFAWY
29.07.1998 19:48:52
2048
Typ
TFAWL
29.07.1998 19:48:49
2048
Typ
TFAWX
29.07.1998 19:48:51
2048
Typ
TFAW
29.07.1998 19:48:45
2048
Prg
RDDFIE00
04.01.2000 19:06:11
19456
Prg
SAPLQAST
13.02.2005 07:23:55
28672
Prg
SAPLBSVA
17.09.2006 09:02:09
270336
Prg
SAPLQSTA
20.01.2000 10:08:08
26624
Typ
TQ01A
29.07.1998 19:56:34
2048
Prg
SAPLOMCV
04.01.2000 19:06:50
14336
Typ
TMCNV
24.02.1999 03:33:25
2048
Prg
SAPLSCNT
15.11.2001 05:19:20
28672
Prg
SAPLSVSM
15.11.2001 05:19:20
25600
Prg
SAPLSGUI
15.11.2001 05:19:20
33792
Prg
SAPLSTTM
17.09.2006 08:49:52
83968
Prg
SAPLSBDC
17.09.2006 08:46:17
66560
Prg
CL_DATAPROVIDER===============
15.11.2001 05:19:18
50176
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSTUP
17.09.2006 08:46:10
96256
Prg
SAPLCNDP
17.09.2006 08:53:21
201728
Prg
SAPFGUICNTL
18.12.2004 11:31:41
20480
Prg
SAPLOLEA
12.07.2002 21:39:11
81920
Prg
SAPLSFES
17.09.2006 08:53:22
164864
Prg
SAPLGRFC
12.07.2002 21:39:11
16384
Prg
SAPSHDTV
18.12.2004 12:16:52
36864
Typ
SHDSTU
14.12.1998 23:15:34
1024
Typ
SHDSTCIU
14.12.1998 23:15:34
1024
Prg
CL_GUI_PROPS_CONSUMER=========
18.12.2004 11:27:30
26624
Prg
CL_DYNAMIC_GUI_EXTENSIONS=====
11.02.2000 14:36:06
55296
Prg
CL_GUI_DATAMANAGER============
18.12.2004 11:34:01
82944
Prg
/1BCDWBEN/SAPLQEN0000
13.07.2002 02:11:40
51200
Prg
SAPLSENA
04.01.2000 19:06:53
28672
Prg
SAPLQELA
17.09.2006 09:27:48
415744
Typ
QALS
13.07.2002 00:12:42
27648
Prg
SAPLQAUT
13.02.2005 01:25:27
177152
Prg
SAPLSWUG
17.09.2006 08:53:33
264192
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
1024
Prg
CL_GOS_MANAGER================
17.09.2006 08:53:30
24576
Prg
CL_GOS_VIEW_MANAGER===========
21.12.1999 19:23:29
29696
Typ
SGOS_MVOBJ
01.12.1999 08:16:05
2048
Prg
SAPLSUU1
17.09.2006 08:53:37
183296
Typ
USR02
15.11.2001 05:09:06
5120
Typ
USREFUS
18.12.2004 11:18:28
1024
Prg
SAPLTHFB
17.09.2006 08:53:29
270336
Typ
BORIDENT
28.08.1997 08:38:50
1024
Prg
CL_GOS_TOOLBOX_MODEL==========
17.09.2006 08:53:30
39936
Typ
SGOS_MODL
08.02.2000 16:42:30
3072
Prg
SAPLBDLS
14.08.2000 15:20:53
13312
Typ
T000
11.09.1997 10:17:18
3072
Prg
CL_GOS_PUBLICATION============
17.09.2006 08:53:30
24576
Prg
CL_GUI_OBJECT=================
15.11.2001 05:19:18
187392
Prg
CL_GUI_CFW====================
18.12.2004 13:28:20
195584
Typ
TOLE
29.07.1998 19:56:01
2048
Prg
SAPLSGOSHIST
17.09.2006 08:53:33
56320
Prg
SAPFSGOS
08.11.2003 23:57:36
13312
Typ
SGOSHIST
14.10.1999 22:09:01
2048
Prg
SAPLURFC
04.01.2000 19:08:13
14336
Prg
CL_GOS_STARTER================
09.12.1999 13:49:28
21504
Prg
CL_GUI_CONTROL================
08.11.2003 23:57:31
117760
Prg
CL_GUI_TOOLBAR================
15.11.2001 05:19:18
72704
Prg
CL_GUI_GOS_CONTAINER==========
01.02.2000 10:16:37
38912
Typ
CFW_LINK
01.12.1999 12:16:48
2048
Prg
CL_GUI_CONTAINER==============
15.11.2001 05:19:18
58368
Prg
SAPLCNTH
08.11.2003 23:56:48
26624
Prg
SAPLSCONTROLINFO
04.01.2000 19:06:52
13312
Prg
SAPLSCONTROLSTATUSCHECK
04.01.2000 19:06:52
10240
Typ
USR05
09.07.1997 23:46:52
1024
Typ
CNTLWARN
25.01.1999 13:09:44
2048
Prg
SAPLICON
17.09.2006 08:39:01
25600
Prg
%_CICON
14.08.2000 15:39:36
55296
Typ
JSTO
27.08.1994 20:32:55
2048
Typ
JEST
27.08.1994 20:32:50
2048
Prg
SAPLAIEV
15.11.2001 05:18:17
14336
Prg
CL_OS_TRANSACTION_END_NOTIFIER
18.12.2004 13:21:30
8192
Typ
LFA1
13.07.2002 01:08:16
12288
Prg
SAPLCPDB
17.09.2006 09:17:36
113664
Typ
PLKO
15.01.1999 22:26:42
9216
Prg
SAPLCCPR
17.09.2006 09:09:14
231424
Typ
TCC08
17.03.1999 16:30:21
4096
Typ
AEEF
13.02.2005 06:49:14
3072
Typ
TCC10
23.04.1998 14:45:07
2048
Typ
TCCET
28.08.1997 09:33:24
1024
Typ
TCCEP
20.08.1998 11:28:15
2048
Typ
TCCER
10.11.1998 05:49:03
2048
Typ
TCCETT
14.02.1998 12:45:20
1024
Typ
TCCEPT
14.02.1998 12:45:07
1024
Typ
TCCERT
17.03.1999 16:24:38
2048
Typ
TCCS01
27.08.1999 18:28:00
1024
Prg
SAPLCCHO
17.09.2006 09:18:17
55296
Prg
SAPLCPTA
17.09.2006 09:09:03
122880
Prg
SAPLCQTA
17.09.2006 09:34:41
88064
Typ
TQ33
10.07.1997 00:12:25
2048
Typ
TQ30
15.04.1998 00:38:23
3072
Typ
TQ30T
14.02.1998 14:11:06
2048
Prg
SAPLCV141
17.09.2006 09:18:22
86016
Typ
DRAD
01.12.1999 15:17:34
3072
Prg
SAPLBSVT
16.08.2000 11:43:43
18432
Prg
SAPLSMSG
18.12.2004 13:27:29
108544
Typ
TJ05
30.11.1993 16:45:10
1024
Typ
TJ01
01.03.1999 13:50:12
4096
Typ
TJ07
30.11.1993 16:45:13
1024
Typ
TJ06
30.11.1993 16:45:11
1024
Typ
TJ03
16.08.2000 11:43:42
2048
Prg
SAPFGUICNTL_CFW
15.11.2001 05:19:19
17408
Prg
CL_GUI_DOCKING_CONTAINER======
15.11.2001 05:19:18
50176
Prg
SAPLQBCK
17.09.2006 09:27:37
106496
Typ
QINF
09.12.1999 19:04:48
5120
Typ
MTQSS
23.04.1998 14:51:52
4096
Prg
SAPLMAQM
17.09.2006 09:35:30
61440
Typ
T001W
18.11.1998 16:27:15
1024
Typ
T001K
01.02.2000 14:56:09
3072
Prg
SAPLMG21
17.09.2006 09:34:30
159744
Typ
MARA
17.09.2006 09:17:34
15360
Prg
SAPLMG22
17.09.2006 09:17:36
115712
Typ
MARC
04.01.2000 18:04:45
23552
Typ
RMQEA
13.08.1997 12:52:02
9216
Typ
TJ02
27.03.1996 18:28:28
1024
Typ
TJ02T
14.02.1998 13:40:18
2048
Typ
TJ04
30.11.1993 16:45:08
2048
Prg
SAPLKDIC
04.01.2000 19:06:48
17408
Prg
SAPLSDTO
04.01.2000 19:06:52
25600
Typ
DD07T
12.05.1997 16:45:51
2048
Prg
SAPLCSCE
04.01.2000 19:06:44
8192
Typ
T024E
10.12.1998 18:01:35
2048
Prg
SAPLSCVU
17.09.2006 08:50:02
59392
Typ
T006A
28.08.1997 09:04:18
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Typ
ARFCRDATA
12.07.2002 21:39:11
3072
Typ
SWCBCONT
14.02.1998 10:14:45
2048
Typ
OLE_VERBS
04.04.1995 16:02:20
1024
Prg
SAPLSDSD
17.09.2006 08:53:36
437248
Typ
DDSHIFACE
20.08.1998 10:51:59
2048
Typ
DFIES
15.01.1999 16:49:52
6144
Typ
DDSHFPROP
20.08.1998 10:51:57
2048
Typ
DDSHSELOPT
20.08.1998 10:52:01
2048
Prg
SAPLSDNT
18.12.2004 12:05:44
188416
Prg
SAPLSDIF
18.12.2004 13:03:59
256000
Typ
T006
29.07.1998 19:25:31
3072
Prg
SAPLSCV0
17.09.2006 08:50:22
99328
Typ
TCA01
10.03.1999 18:31:19
5120
Typ
TCA02
14.02.1998 12:40:44
2048
Typ
TCA35
06.07.1998 20:51:04
2048
Typ
QMAT
27.08.1999 18:14:19
5120
Typ
TQ32
10.07.1997 00:12:23
2048
Prg
SAPLXQPL
17.09.2006 09:30:13
28672
Typ
TCA44
29.07.1998 19:44:06
2048
Prg
SAPLQPAP
17.09.2006 09:30:13
295936
Prg
SAPMSSY0
17.09.2006 08:53:44
69632
Prg
SAPLSNR3
17.09.2006 08:53:36
48128
Typ
TNRO
18.12.2004 13:02:43
4096
Prg
SAPLQEEV
17.09.2006 09:27:48
216064
Typ
QAPP
15.04.1998 00:12:33
7168
Typ
TQSS
20.01.2000 10:08:08
3072
Prg
SAPLQMCF
17.09.2006 09:34:35
46080
Prg
SAPLCEI0
03.12.2006 09:44:54
1121280
Prg
SAPLCUEV
13.07.2002 02:21:41
11264
Typ
IBINCOM
01.06.1999 11:56:27
2048
Typ
IBINCONF
01.06.1999 11:56:27
2048
Typ
IBSTCONF
01.06.1999 11:56:28
1024
Prg
IF_EX_CEI0_INVLD_POSSIBLE=====
12.02.2005 20:53:18
4096
Prg
CL_EX_CEI0_INVLD_POSSIBLE=====
12.02.2005 20:52:40
10240
Prg
CL_EXIT_MASTER================
01.02.2000 09:29:10
10240
Typ
V_EXT_IMP
14.10.1999 22:16:55
2048
Prg
SAPLCUCB
17.09.2006 09:34:59
199680
Typ
TCUIBSPECIAL
15.11.2001 05:31:05
1024
Prg
CL_CBASE======================
13.02.2005 07:14:09
95232
Typ
T371G
29.04.1998 10:42:48
1024
Prg
SAPLIBCO
13.02.2005 05:49:04
305152
Prg
SAPLIBXX
13.07.2002 02:21:41
12288
Prg
SAPLIBIBF
13.02.2005 06:58:29
177152
Prg
SAPLIBINF
13.02.2005 06:58:30
452608
Prg
CL_IBASE_STRUC================
13.07.2002 02:21:39
141312
Prg
CL_IBASE_STRUC_BUF============
13.02.2005 01:44:37
120832
Prg
CL_IBASE_STRUC_STAT===========
13.07.2002 02:21:39
9216
Prg
CL_IBASE_STRUC_BUF_IBSTREF====
13.02.2005 01:44:37
61440
Typ
IBINVAL
14.05.1998 22:39:25
2048
Prg
SAPLIBCU
13.07.2002 02:21:41
14336
Prg
SAPLIBCUT
13.07.2002 02:21:41
14336
Typ
T371B
14.05.1998 22:58:43
1024
Prg
CL_IBASE_SERVICE==============
13.07.2002 02:21:39
17408
Prg
CL_IBASE_T371D_BUF============
13.07.2002 02:21:39
15360
Typ
T371D
27.08.1999 18:19:44
2048
Prg
CL_IBASE_R3_MATERIAL==========
17.09.2006 09:33:39
99328
Typ
MAKT
28.08.1997 08:52:19
2048
Typ
ICON
03.01.1996 15:34:02
3072
Prg
IF_EX_CM_BADI_VERSION=========
12.07.2002 23:55:25
4096
Prg
CL_EX_CM_BADI_VERSION=========
12.07.2002 23:54:25
11264
Prg
CL_DEF_IM_CM_BADI_VERSION=====
12.07.2002 23:54:24
8192
Prg
SAPLASTAT_TRIG
18.12.2004 12:15:52
12288
Typ
ASTAT_TYP2
10.11.1998 05:35:18
1024
Typ
ASTAT_TYP1
30.11.1998 15:54:16
1024
Prg
IF_CM_BASELINE================
13.02.2005 06:50:14
40960
Prg
IF_IBASE_IBOF_TREE_OBJECT=====
13.02.2005 05:59:51
10240
Prg
IF_IBASE_INSTALL==============
13.07.2002 02:21:40
4096
Prg
IF_IBASE_MATERIAL=============
13.07.2002 02:21:40
4096
Prg
IF_IBASE_OBJECT===============
13.07.2002 02:21:40
5120
Prg
SAPLBOMA
01.02.2000 14:54:24
13312Hi Sanjay,
This dump generally occurs when there are inconsistencies between the name of the fields in the fieldcatalog and the names of the fields in the internal table. Please post ur code.(Assuming that this dump has occured in a Z* program)
Edited by: Rajesh on Dec 29, 2007 2:40 PM -
Too many abap dumps in production system
gurus ,
i have a doubt . there was around 56 abap dumps by a single user .
i just want to know whether having these much of abap dumps in the production will hit performance system in a way or other ?
if so i can make alert them on the criticality of running a report in production ."the problem is , most of the dumps are SYNTAX_ERROR which are generated by the customized reports created by the users"
Good! I much prefer them to the "there is something wrong with your system" type dumps.
"these people make a direct attempt in production directly resulting in lot of dumps .
we have a quality client with the latest production datas , but they dont do their first .
i am not sure whether this practice will really hit any performance issue .
if so then i can insist them the importance of being alert before making an attempt in production"
Bad, bad, bad practise.
As you have mentioned a QA system, I'm assuming that you have at least a 3 tier landscape ... tell the developers to use it!
p.s - the problem isn't so much that the users are running the reports directly in Prod, it's that the reports haven't been tested properly before they reach the Prod system ! -
Short Dump in Prod system in RSA3 for Datasource 2LIS_18_I0NOTIF...Help Pls
Dear Guru's
In our porod System in Tcode RSA3 when i give Dsource 2LIS_18_I0NOTIF and click on Extract i get Follwing Dump
I searched for the note but i did not found any thing proper
Here r Dump Details:-------
Runtime Error CONNE_IMPORT_WRONG_COMP_TYPE
Exception CX_SY_IMPORT_MISMATCH_ERROR
Occurred on 13.08.2008 at 14:21:57
Error when attempting to IMPORT object "MC18I00NTF_TAB".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLMCEX" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
When attempting to import data, it was discovered that the data
type of the stored data was not the same as that specified in the
program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_E
was neither
caught nor passed along using a RAISING clause, in the procedure
"MCEX_BW_LO_API" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When importing the object "MC18I00NTF_TAB", the component no. 2 in the
dataset has a different type from the corresponding component
of the target object in the program "SAPLMCEX".
The data type is "D" in the dataset, but "F" in the program.
How to correct the error
The exception must either be prevented, caught within the procedure
"MCEX_BW_LO_API"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Try to find out why the type of the object is different.
There are several possible reasons:
|
--- In the ABAP Dictionary, the type of the imported
| field has changed. Make sure that the type of the imported
| field matches the length of the Dictionary field.
|| If the data could not be restored from another source, this data
| must be read with the "old" structure, then converted and exported
back with the new structure, so that future IMPORTs always work
with the new structure.
A new program version is active, and it no longer matches the
dataset. Try to solve the error by generating the program "SAPLMCEX" again
as follows:
In the SAP System, choose the transaction SE38. Enter the program
name "SAPLMCEX". Then choose the "Activate" function.
Can any one please kindly help....
ThanksHi,
so did you change anything at your datasource? Before transporting to prod, you need to delete the setup tables and then you need to run a delta to pick the latest delta records, then transport, replicate and activate the comm-structure. That will not effect your delta in prod. But again, for me the dump looks like a mismatch between the extract structure and the setup tables. You might have changed something after the setup tables have been filled. And additionally usually rsa3 is doing a full and so pulling the data out of the setup tables.
regards
Siggi -
Hi Experts,
I got following error description in ST22.plz can anyone tell m
what will be the probable reason for this dump. How should i correct it?
Where i need to check?
Errore run-time DBIF_REPO_PART_ALREADY_EXISTS
Analysis:
Internal problem: You attempted to insert a program which already
exists partially at least. This is probably due to an inconsistency in the database tables.hi Sheetal,
What happened is your Basis guy might have not imported this TR properly.
I will tell what would have been your scenario. There is a program in production.
You deleted that program in developement and recreated the same and you moved it to production under one TR. Correct me if I am wrong in any of above.
Just ask your Basis to import this TR with overwrite option checked.
Reward all useful answers.
Regards,
Atish -
Getting Dump in Production system
Hi,
we are getting dump in one customise program due to missing include program.
how to transport this missing program.?
regards,
RameshHi,
run tcode SE10 in DEV system.
click on create -> select workbench request -> enter description of request -> enter
now double click on request -> click change end enter following
In first row
Program ID: R3TR
Object Type: PROG
Object Name: name of include. press enter
in second row
Program ID: LIMU
Object Type: REPS
Object Name: name of include. press enter
then click on release.
import this request in PRD system.
regards,
kaushal -
Short Dumps in BW Production System
Hi BW Experts,
When iam loading the PCA data (0PCA_C01), i am getting the following Short Dumps in my Systems.
DBIF_RSQL_SQL_ERROR
RAISE_EXCEPTION
TSV_TNEW_PAGE_ALLOC_FAILED
TSV_TABH_POOL_NO_ROLL_MEMORY
TSV_TNEW_OCCURS_NO_ROLL_MEMORY
SYSTEM_NO_ROLL
Today i got 131 Short Dumps in my System.
Please can anyone tell me the solution for this Short Dumps.
Thanks in advance
Regards,
AnjaliI am receiving the following Run time error in a Process Chain
Name of the runtime: System_NO_ROLL
*Information on where terminated*
The termination occurred in the ABAP program "GP45O123XOQKIU82AMIR5C27RCN" in
"ROUTINE_9998".
The main program was "SAPMSSY1 ".
The termination occurred in line 3255 of the source code of the (Include)
program "GP45O123XOQKIU82AMIR5C27RCN"
of the source code of program "GP45O123XOQKIU82AMIR5C27RCN" (when calling the
editor 32550).
Source Code Extract
Line SourceCde
3225 *delete DATA_PACKAGE where CRM_SRVORG <> '50000053'.
3226 *** Move data package to internal table******************************
3227 *it_package[] = DATA_PACKAGE[].
3228 *SORT it_package ASCENDING BY CRM_ACGUID.
3229 *DELETE ADJACENT DUPLICATES FROM it_package
3230 * COMPARING CRM_ACGUID.
3231 *ilookup[] = it_package[].
3232 *SORT ilookup ASCENDING BY CRM_ACGUID.
3233 ** if abort is not equal zero, the update process will be canceled
3234 * ABORT = 0.
3235
3236 * New code to get the Interaction id for Quick Close
3237 DATA : it_package like STANDARD TABLE OF DATA_PACKAGE.
3238
3239 delete DATA_PACKAGE where CRM_SRVORG <> '50000053'.
3240
3241 it_package[] = DATA_PACKAGE[].
3242
3243 DELETE it_package where crm_prctyp <> 'Z260'
3244 AND crm_preotp <> 'BUS2000126'
3245 AND crm_predoc is INITIAL.
3246 SORT it_package ASCENDING BY crm_predoc.
3247
3248 DELETE ADJACENT DUPLICATES FROM it_package
3249 COMPARING crm_predoc.
3250
3251 SELECT CRM_ACGUID CRM_OBJ_ID FROM /BIC/AZ0SAL_D100 INTO TABLE ilookup
3252 FOR ALL ENTRIES IN it_package
3253 WHERE CRM_ACGUID = it_package-crm_predoc.
3254
>>>>> SORT ilookup ASCENDING BY CRM_ACGUID.
3256
3257
3258 -
Short dump in custom report in production
Hi Experts,
I have a custom report which is run through SM37 as a background job. it takes long time to run and then get canceled with short dump in production but it runs fine in development.
description of short dump.
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 03.05.2010 11:33:06
Short text
| SQL error in the database when accessing a table.Hi,
Please go through the below notes
[Note 1379839 - RuntimeError DBIF_RSQL_SQL_ERROR Exception CX_SY_OPEN_SQL_DB|https://service.sap.com/sap/support/notes/1379839]
[Note 1098183 - RunErr dbif_rsql_sql_error with exception CX_SY_OPEN_SQL_DB|https://service.sap.com/sap/support/notes/1098183]
[Note 1410849 - Runtime error DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"|https://service.sap.com/sap/support/notes/1410849]
This is mainly program error and need corrections...
Compare the Patch level on both DEV and PRD server. Also make sure, whether program you are using on developement is modified (Corrected) or standard one.
If you search for the SAP Notes with "DBIF_RSQL_SQL_ERROR Exception CX_SY_OPEN_SQL_DB" string, you will get several hits. See the notes which are applicable in your scenario...
Regards.
Sumit Nene -
hi everyone,
when I run the Tcode:TBB1，i come across a ABAP short dump error.
my system environment is:
PC
windows2003NT
oracle10.2
independant system without SLD control
The error info as follow:
Note 837202 - TPM_MIGRATION:tpm18: Short dump with TPM_TRD1 000
Summary
Symptom
You migrate from Release CFM or Enterprise 1.10 to ERP 2.0 or higher. There are already parallel valuation areas in use. In tpm_migration_cat, you specify a key date. In the test system, the following short dump occurs for the parallel valuation areas:
Error message short text:
Internal error: SLD
Message class: "TPM_TRD1"
Number: 000
Variable 1: "SLD"
Other terms
CL_DISTRIBUTOR_SLD, TPM_TRD1000
Solution
In the production system, you have to carry out tpm18 before the technical upgrade for all business transactions that are before the key date from tpm_migration_cat.
I do not understand how to do with the soluton
eg.what is "tpm18"?
Do need your helps,
Thank you very much
PeterHi Peter,
I guess you found note 837202 when you were looking for a solution for the TBB1 dump you encountered.
This note deals with a special situation when executing tpm18 (which is the transaction for fixing and posting derived flows) in a test system after migration and it tells you you should run tpm18 in production before the technical upgrade.
I am not sure if this really applies to your situation, maybe you should rather check if note 821854 and the solution therein can be helpful.
But without more information (e.g. knowing more about your release, your 'migration history' and the part of the coding where the dump is raised), it is quite difficult to give a diagnosis.
Maybe you should think of sending a customer message to SAP support via the SAP marketplace if you cannot get rid of this problem on your own. -
Short dump SAPLSLVC_FULLSCREEN in ALV mode
Hi all
I encountered a short dump in production after i load a text file in my customised program. I did not encountered such error in DEV and UAT. This dump occurs when i add or remove the columns in ALV mode.
Runtime Error PERFORM_NOT_FOUND
Exception CX_SY_DYN_CALL_ILLEGAL_FORM
Occurred on 22.05.2008 at 15:02:44
Call (PERFORM) to a non-existent routine.
What happened?
The current program attempted to call an externally defined routine
that does not exist.
Error in ABAP application program.
The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because one
of the
statements could not be executed.
This is probably due to an error in the ABAP program.
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLSLVC_FULLSCREEN" had to be terminated because the
ABAP
processor discovered an invalid system state.
Can anyone kindly advice? Thanks.** WA-NAME = 'TOP_OF_PAGE'. "'SLIS_EV_TOP_OF_PAGE'.
** WA-FORM = 'TOPOFPAGE'.
** APPEND WA TO T_EVENTS.
** WA-NAME = 'END_OF_PAGE'.
** WA-FORM = 'ENDOFPAGE'.
** APPEND WA TO T_EVENTS.
** WA-NAME = 'END_OF_LIST'.
** WA-FORM = 'ENDOFLIST'.
** APPEND WA TO T_EVENTS.
please comment like this code in your code.. -
What is the maximum number of recursive call as i think it is causing short dump
Hi All,
This may not have a specific answer i suppose but approx is also fine. There was a short dump in production ( the background job failed , an is failing each day since a week now ). I was analysing it what i found was the cause for there was numerous call to the same routine within it self ( recursion ). The exact number i dont have but they were atleast more the 200.
The error message which i get is :
Are there any solution regarding
Category
Resource Shortage
Runtime Errors
TSV_TNEW_PAGE_ALLOC_FAILED
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
it would be great if we know the max numbers of an recursive call so that i can do the necessary changes or if some 1 has any other alternative solution pls. help.
Regards,
Dhruvin
P.s : it's a productive environment issue.The dump is not caused by depth of recursion but rather memory limits being exceeded by your process, these are controlled by profile parameters (System administrator stuff) and "normally" (unless changed to other values) allow up to 4 GB of memory usage (mostly by internal tables). You can quickly check the current memory consumption of your active process via SM50.
Make sure that the routine that is called recursively (or other relevant parts of your process) free up memory by using CLEAR and FREE statements for internal tables that are no longer needed.
If data is being selected from the database also look into block processing via the PACKAGE SIZE option.
Thomas -
Dear All,
Hope all are doing fine ..Am struck with some issue.
Am getting short dump in Quality system because of excess time limit in the following select statement.
data: l_size type i value 1000.
SELECT vbeln
posnr
matnr
werks
ps_psp_pnr
APPENDING TABLE it_vbap
FROM vbap
PACKAGE SIZE L_SIZE
FOR ALL ENTRIES IN it_vbak
WHERE vbeln EQ it_vbak-vbeln
AND lsmeng EQ space
AND matnr IN r_matnr
AND werks IN r_werks.
ENDSELECT.
Pls. suggest me alternatives to get out of this short dump in the select statement....
Thanks & Regards
JackDear RichHeilman,
Thanks alot for your great response..
am pasting the code which will be more easier for you to rectify my dump.
In Quality it_vbak has 80,000 records ,, the moment it reaches to it_vbap it goes to dump for having excess time limit.
SELECT vbeln
vkorg
vtweg
spart
kunnr
INTO TABLE it_vbak
FROM vbak
WHERE vkorg IN so_vkorg
AND vtweg IN r_vtweg
AND spart IN r_spart
AND kunnr IN r_kunnr
AND bukrs_vf EQ p_bukrs.
IF NOT it_vbak[] IS INITIAL.
SELECT vbeln
posnr
matnr
werks
ps_psp_pnr
APPENDING TABLE it_vbap
FROM vbap
PACKAGE SIZE L_SIZE
FOR ALL ENTRIES IN it_vbak
WHERE vbeln EQ it_vbak-vbeln
AND lsmeng EQ space
AND matnr IN r_matnr
AND werks IN r_werks.
ENDSELECT.
ENDIF.
Thanks in advance
Jack
Maybe you are looking for
-
How to stream audio in Windows Phone 8.1?
I have a Windows Phone Silverlight 8.0 app I want to update to 8.1 using WinRT. It streams audio in the background. In Silverlight, I used BackgroundAudioPlayer to set the Track to a Uri. It's not clear how to do this with MediaPlayer in WinRT. I
-
@
-
Replacement for FM DD_PR_GET_STATUS
Hi all, Can anyone please let me know if there is any replacement for FM DD_PR_GET_STATUS as it's obselete. Thanks Ravi
-
Include invoices with status 3 in FBL1N report
We have vendor invoices that come in through EDI. If there is an issue with the invoice they automatically park with a status of 3 (parked with errors). Does anyone know if it is possible to include these invoices in the FBL1N line item report? It
-
Mac OS X 10.6 all in one printer
I have a Mac OS X 10.6 and im trying to install the HP ENVY 5660 and it says it doesn't have the software. do i have to get a new printer?