Short dump in trx VL02N and MIGO after upgrade to ECC 6.0

Hello,
We are doing an upgrade from R/3 46C to ECC 6.0 and we face a shortdump in trx MIGO (upon saving the document).
DBIF_RSQL_INVALID_REQUEST
a BKPF_INSERT in program SAPLF005
The same shortdump happens when doing a Goods Issue on the SD side.
Looking at the program, this is not modyfied so I guess it is a standard SAP error.
OSS however, up to know did not respond to my message and there does not seem to be a SAP Note on this issue!
Anyone had this problem before. How did they solve it.
Thanks for any reply,
Aart

When exactly does this error appear? On save? clicking on a specific entry?
I suggest opening an OSS call for this problem, this doesn't seem to known (at least I didn't find any notes)
Markus

Similar Messages

HT3529 My iphone 3GS is stuck in recovery mode since upgrading to ios 5 and still, after upgrading to ios 6. What's up ?

My iphone 3GS is stuck in recovery mode since upgrading to ios 5 and still, after upgrading to ios 6. What's up ?

I just went through this yesterday and because i am no where around my computer i lost everything and now my battery drains very fast...you are going to have to recover your phone i hope you have everything backed up and are next to your computer...if you are push and hold your home button and plug into PC at same time and continue to hold the home button untill you see your USB on your pc screen light up (depending on what type of pc maybe i dont know what you have)
push home button
Plug into pc usb
usb on pc screen lights up..let go of home button
follow instructions for restore/sinc
hope it helps

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please!

I can't activate my iMessage and FaceTime after upgrading to ios7? Help please! TIA

Try this support document http://support.apple.com/kb/TS4268 for problems with activating iMessage and Facetime.

Siri's voice in the UK is muffled and robotic after upgrading to ios7. Does anyone have a solution?

Siri's voice in the UK is muffled and robotic after upgrading to ios7. Does anyone have a solution?
I know that it mispronounced things a bit in ios6, but this is a lot worse! The American voices seem ok.

this is expected, it happened on iOS 6 too. whenever you restore your iPhone, it will take a while for it to download additional content (like the Siri tone, etc).
I had this exactsame thing happen a few months ago on iOS 6. Best bet, wait about 24 hours, and it will be perfect! Even better sounding

Couldn't sign in to FaceTime and iMessage after upgrade to iOS7..

I couldn't sign in to FaceTime and iMessage after upgrade to ios7 ... Please help !!

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

HT201250 How to restore all my mac book pro (mid 2009) files, data, Mavericks and settings after upgrading HD (250 to 500GB) from my Time Capsule?

Hi everyone!
Please, I need a big help from you!
Do you know how to restore from Time Capsule all my mac book pro (mid 2009) files, data, Mavericks and settings after upgrading HD (250 to 500GB)?
Thank you very much!
Best regards,
Marcio

Recover your entire system
See 14.
Time Machine FAQ

Special Characters in Packed Field After Upgradation from ECC 5 to ECC 6

Hi All,
After Upgraded from ECC 5 to ECC 6, we are getting error as 'Packed field contains incorrect BCD format'.
I found the error in below code..
CALL METHOD cl_abap_container_utilities=>read_container_c
      EXPORTING
        im_container           = j_2iextrct-extrctdata
      IMPORTING
        ex_value               = i_rg23part2-i_part2_typ
      EXCEPTIONS
        illegal_parameter_type = 1
        OTHERS                 = 2.
i_rg23part2-i_part2_typ-EXAED = 0.<0
i_rg23part2-i_part2_typ-CESS   = 0.<0
for some packed fields special characters are appearing, which leads to a short dump.
Any Suggestions.....
Thanks,
Satish Reddy.
Edited by: Sathish Reddy on Jun 25, 2010 4:49 PM
Edited by: Sathish Reddy on Jun 26, 2010 11:01 AM
Edited by: Sathish Reddy on Jun 29, 2010 12:58 PM
Edited by: Sathish Reddy on Jun 30, 2010 11:51 AM

HELLO,
Search the form you will get few links.
Also many companies have gone technical upgradation , but not functional upgradation.
Thanks
RK

ERROR MESSAGE IN PPOME TCODE AFTER UPGRADE TO ECC 6.0

Hi Experts,
I have a question.
Recently our system went for upgrade and during testing phase we have found one issue.
Error message is appearing in PPOME transactio code after upgrade to ECC 6.0
The screen is getting defaulted to Budget section and unable to find the subtype as there are no subtypes available there and showing error message as "Fill in all required fields".
Please let me know your solution on this.
Regards,
Sekhar.

Hi,
- you can deactivate the budget tab in the IMG-activity 'Hide/Show Tab Page'
(SIMG_CFMENUOHP1HFW20 alternatively use SM30 on view 'T77OCTABUS')
1. Create new entries for the following KEY:
a) Scenario OME0
b) Object type 'P', 'O', 'S'
c) Tab Page 'PBC_ORIG'
2. for each of this entries, set the 'Exclude Tab Page'-Flag.
- in case you do not want to deactivate the Budget tab:
The error occurs due to missing entries for subtypes in table T778U
for infotype 1516.
Please maintain the according subtyes you want to use if you create a
budget.
Regards,
Ana

SE07 doesn't show Import status after upgrade to ECC 6.0

Hi,
we were on 4.7 and we recently upgraded to ECC 6.0 EHP4. When we were on 4.7, after a release, we used to monitor the import status of all the transports going in, using transaction SE07. Looks like this transaction wouldn't work anymore in ECC6.
I can access the transaction, but I cannot expand the "Execution" to see the status of the transports which went in today. 4.7 used to show all the transports which were impoerted on that day.
I know we can check the import logs by pulling up each transport, but SE07 will show you a consolidated list with all the detail and will be very easy to find what we are looking for.
We are on Oracle 11g on Solaris 10. Please help.
Regards,
Vijay

Hi Tony,
I donot think it is an authorization problem. I have tried with a test user with full permissions and also with DDIC user, but still the same.
Regards,
Vijay

Statistical-relevent delivery date not showing up in PO after upgrad to ECC

Hi Gurus,
After upgrade to ECC, Statistical-relevant delivery date (PO Item details --> delivery schedule tab) is not showing up when I convert PR to PO from Stock requirements list(MDO7).
Could you please help me out this issue.

Maintain the item category in your material master at sales organisation level and try again.
Also Please Check the delivery item category determination in trxn code 0184 there you define which item category is to be found for the combination of delivery type NL and item category group.
Regards,
Ashok
Edited by: Ashok Kumar Telikula on Aug 27, 2008 2:35 PM

Barcode doesn't work after upgrade to ECC

Hi All,
In sapscript, we used bardcode. But after upgrade to ECC, it doesn't work.
Could you help me about it??
And we don't want to convert the sapscript to smartforms and use the new barcode technique.
Looking forward you help!!
Thanks & Best Regards,

Hi ,
I think some function moule is missed, please check the driver program also. In production you are getting Barcodes ?. Or otherwise goto se73 - we have bar codes types.. system and printer barcodes . please assign the printer bar codes in output devices.
Best Regards,
Narasimha Rao.

Short Dump-Syntax error program"CL_RSD_MULTIPROV==CP" after EHP1SP5 upgrade

Hi,
MultiProvider Activation/Display data is resulting into short dump with following text
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSD_MULTIPROV==============CP " in include
"CL_RSD_MULTIPROV==============CM010 " in
line 1:
"Method "CHECK_LINITFL" is not declared or inherited in class "CL_RSD_M"
"ULTIPROV". -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
We have recently upgraded to EHP1SP5. We noticed this issue just after that.
Regards,
PD

Hi,
Please check the note 1461401.
1461401 - System error in the program CL_RSD_MULTIPROV_CHECK
This note should help you.
Regards,
Rafael

Short dump CONNE_IMPORT_CONVERSION_ERROR in PC00_M14_CALC and PC00_M28_CALC

Hi expert,
We just upgrade to ECC6 EHP4 SP12.
When first testing the payroll driver for China and Malaysia, I got short dump:
Runtime Errors CONNE_IMPORT_CONVERSION_ERROR
Exception CX_SY_CONVERSION_CODEPAGE
Error in IMPORT statement: Change of length on conversion.
The error that occur for Malaysia is in include RPCHRTL9, form IMPORT-OLD-NATIO.
When trying to call the macro RP-IMP-C2-RL-O, the short dump raised.
The error that occur for China is in include PCHRTCN9, form IMPORT-OLD-NATIO.
When trying to call the macro RP-IMP-C2-CN-O, the short dump raised.
I have tried to debug into the program, but I could not find the root cause since we are not allowed to debug macro.
I had crawled the SDN forum and SAP notes, and still can't find the appropriate solution.
Do anyone has any idea about the short dump I got? Please kindly advice.
thank you.
Br,
Edison

Hi All,
I got the solution for this issue for my kind of problem.
In program RPU600BT_CONV_SINGLE_CL we commented the following
START-OF-SELECTION.
IF 1 = 0. MESSAGE e567(3g). ENDIF.                        "#EC *
PERFORM append_message USING 1
                              space
                             '567' "report not necessary
                             space
                             space
                             space
                             space
                             'P'.
STOP. "check note 1314769 whether conversion is necessary
After this execute the same program and we will get the old results get converted.
And one more is we should be careful in checking SAPU & SPAD transaction codes. There shouldn't be any partially implemented notes.
Think will help at least one.
Regards
Aditya Surapaneni

Short dump in BP after upgrade to ECC 6.0

Hi,
We have upgraded system to ECC 6.0 from ECC 5.0
After upgrade system is giving short dump in transaction BP, event tried to navigate on BP screen.
Short dump description:
A RAISE statement in the program "CL_OS_TRANSACTION=============CP" raised the exception condition "OS_COMMIT_TOP_FAILED".
Since the exception was not intercepted by a superior program, processing was terminated.
Please advise to resolve this issue.
Regards,
Dipak

When exactly does this error appear? On save? clicking on a specific entry?
I suggest opening an OSS call for this problem, this doesn't seem to known (at least I didn't find any notes)
Markus

Cannot find dashboard and reports after upgrading rdp from 10g to 11g OBIEE

Hi all
I am trying to upgrade from OBIEE 10g to 11g. These two products are installed on different servers. I have followed the guide: http://www.oracle.com/technetwork/issue-archive/2011/11-jul/o41bi-402913.html and everything seems to work fine.
So i have taken a copy of rdp from the server where was installed OBIEE 10g and took it in the server where OBIEE 11g is installed.
Ran the upgrade tool and upgrade finished successfully. Restarted the BI Servers in core application on Enterprise Manager.
Now when i access the upgraded rpd, the layers and the fields are fine but I cannot find all the reports and dashboards that i had created.
Am I missing any upgrade steps?
Please suggest
Thank you and best regards

Hi Deepak,
Thanks for your response.
Oracle also came back to me and looks like my method is not valid:
Hi Jim,
Thanks a lot for the information. First of all I would like to inform you that upgrade CANNOT be performed across two machine. So, if 10g installation is on Host A, then upgrade to 11g will be on Host A.
So, in your scenario this is what you can do:
1. On Host A running Forms/Discoverer 10g on Windows 2003, install Forms/Discoverer/Reports 11g (11.1.1.6.0)
2. Run the upgrade Assistant to perform the upgrade from 10g to 11g.
3. Now upgrade OS of Host A to Windows 2008
In short, I would like to inform you that upgrades across machines does not work. Source instance which is 10g and destination instance which is 11g must exist on same box.
Here is the documentation which you can follow:
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10130/toc.htm
(Oracle® Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer)
11g Release 1 (11.1.1)
Let me know if you have any further questions.
Thanks,
Rishi

Short dump in trx VL02N and MIGO after upgrade to ECC 6.0

Similar Messages

Maybe you are looking for