Short dump MESSAGE_TYPE_X in displaying data from BPC Virtualcube

Hi Experts,
I am experiencing an error when try to display data from a BPC VirtualProvider Infocube (both from Workbench and with LISTCUBE transaction).
This kind of virtualcube is auto generated by BPC.
When I do some kind of selection I obtain this error: MESSAGE_TYPE_X
Short text of error message:
System error in program SAPLRRK0 and form CHECK_KHANDLE (see long text)
Technical information about the message:
Message class....... "BRAIN"
Number.............. 299
Variable 1.......... "SAPLRRK0"
Variable 2.......... "CHECK_KHANDLE"
I have another BPC vitualprovider and this doesnu2019t happen.
I would use this cube inside a multiprovider, that has a BI cube too, and get the data through a BEx query. But the query throws the error and stopped.
I know that there could be problems with BPC structures (i.e. changes in tech name when transporting it), but at the moment I donu2019t see other solution to compare BI to BPC data.
I went through other posts in sdn forum for this issue, but I am not able to get the exact solution,
please help
Thanks,
Marco
System version:
BW: 701 level 0007
BPC: 750 level 0005

Hi Lokesh,
I read the note you have indicated.
For the first note 1479393: I donu2019t have hierarchies and the error appears in a different program to what is indicated in the note. This is where terminated:
Termination occurred in the ABAP program "SAPLRRK0" - in "CHECK_KHANDLE".
The main program was "GP4LQ7N6RS4RUB6HA69UREYGPKB ".
In the source code you have the termination point in line 34
of the (Include) program "LRRK0F05".
Furthermore, there are no calculated measures nor members in the MDX statement, because I just try to display the data from the virtualcube.
For the second 1448691: yes, it could be a performance related problem. Indeed, when I apply stronger filters, the error doesnu2019t occur and I got the data. But the system is already patched to SAPKW70107.
So, do you have any other ideas?
Thanks,
Marco

Similar Messages

Getting short dumps while reading bulky data from excel sheet

Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._

for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

Short Dump error while loading data from R/3 to ODS

Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
                                                                                Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
     GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
     can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
         ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
         transfer program using the function Activate. Remove possible syntax
         errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
        problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PM

Hi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani....

Display data from a virtual InfoCube

Hi experts,
When I tryed to display data from the virtual InfoCube 0FIGL_V40, I've got a dump.
Please help me to solve this problem.

Dear Akshay,
Is it possible that the problem comes from R/3 since when I check the extractor 0FI_GL_40 with the RSA3 Tcode I've got the message:
Errors occurred during the extraction --- Message no. RJ012
I think that the pb has been solved by switching on the business function "Reporting Financials" . Inthe SAP source System -> TA: SFW5. Turn on Reporting Financials. Then I've no pb while testing the extractor.
Pb solved.
Many thanks
Youness
Edited by: Youness NAJI on Jan 13, 2010 4:39 PM

How do I display data from Multiple Queries in a spreadsheet?

I am running Oracle forms 10g as a kicker to export a report (rdf 10.1.2.0.2) to PDF or Excel Spreadsheet - User's choice.
Doesn't matter if I have desformat = SPREADSHEET, DELIMITEDDATA, or DELIMITED; I still get only the first query displayed when I run in spreadsheet format.
How do I display data from Multiple Queries in a spreadsheet? Is this possible?
Thanks in advance!

Hi adam,
did you search the forum? You will find a lot of threads handling the problem of Excel file access.
In short: you need to use ActiveX (the RGT also uses ActiveX under the hood)!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to display data from a recordset based on data from another recordset

How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.

Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
>

Retraction cost center plan data from BPC to ECC

HI Experts,
We are integrating BW-BPC.
The client wants to Retract the data from BPC to ECC System for reporting purposes.
u201CIn order to be able to calculate standard costs correctly in production plants planning data from BPC is needed in SAP ECC.
The data needed is the planning data on cost centers which are currently entered into SAP manually via transaction KP06. This data will now be entered into BPC instead and therefore it is required to get an interface between BPC and SAP ECC for transferring data.
A description of the process and the data needed is available in the section u201CSAP ECC Screen Dumpu201D sectionu201D including screen dumps from ECC
If this interface is not created the task of entering in the planning data will double as the data must be entered both in BPC and SAP ECC. The process of entering in the data twice I estimate will add 1 u2013 2 extra days of work for each subsidiary involved in this.u201D
What is the options to support this Business Process of getting data from BPC to SAP ECC.
Regards
venu
Edited by: venu WAD on Aug 19, 2011 7:19 AM
Edited by: venu WAD on Aug 19, 2011 10:17 AM

Hi Keyrun:
Please refer to slide 7 of document below.
"SAP NetWeaver 7.0 Data Retraction in BI Integrated Planning"
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30af46fb-eb4f-2a10-4899-9167af035742?quicklink=index&overridelayout=true
>Online documentation: http://help.sap.com/saphelp_sem60ep1/helpdata/en/99/97157967e3440a94d199538959cd0b/frameset.htm
>See SAP Note 525543 for additional documentation on field mapping.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Jun 22, 2010 8:13 PM

Issue with display data from infoset

Dear Experts,
When I am trying to display data from BI INFOSET in (Execute in background ctrl+F2)backend it is working fine but when in try to run the execution in forground (execute F8) then the system gets hang.. and time out. could any one has this kind of experience. if so kindly let me know do i need to implement any patch or else which way i can do work to resolve this issue.
Thanks in advance.
Mannu

Hi Krishna,
I have tried as you have suggested ie. using Tcode RSISET for displaying data but still i have the same issue.
Could any one post any additional suggestions to follow.
Thanks in advance,
Mannu

Display Data from multiple models in one table

Hi Experts,
Is it possible to display data from multiple models in one table smltnsly.
I have created a table dynamically.Now I would like to display data from multiple models... If this possible,can anyone give me a lead as to how to do it..
Regards
SU

Hi
Your Model Nodes be
Model1
---Output_Model1
Attrib1
Attrib2
Model2
---Output_model2
Attrib1
Attrib2
and the value node is
ValueNode
---Attrib1
---Attrib2
Now the coding.
int size;
IPrivate<ViewName>.IOutput_mode1Node node1 = wdContext.nodeOuptut_Model1();
IPrivate<ViewName>.IValueNodeElement elem;
size = node1.size();
for(int i=0; i<size; i++)
   elem = wdContext.createValueNodeElement();
   elem.setAttrib1( node1.getOutput_Model1ElementAt(i).getAttrib1() );
   elem.setAttrib2( node1.getOutput_Model1ElementAt(i).getAttrib2();
   wdContext.nodeValueNode().addElement( elem );
similar code for Model Node 2
Regards
Abhimanyu L

Display data from BLOB column.

Hi All,
I want to display data from blob datatype field, which contains HTML and GIF both files.
If I set it's property from file format IMAGE then i get data only gif.
if anybody have answer plz revert back...
awaiting...
Juned

Hi Juned
What I suggest is that you may have overlapping fields. One to show HTML and other to show GIF. You need to add one more column to your table in order identify if the BLOB is GIF or HTML.
In the Format Trigger of each of these two fields, inspect the value of flag column and hide one field if the datatype is not its type.
For instance, if flag field is 0 then hide Image field and show HTML field. If flag field is 1 then show Image field and hide HTML field.
Regards
Sripathy

Display data from multiple document Libraries in List View Webpart

Hi All,
I want to display data from multiple document libraries into one list view webpart(custom i have created)
I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
but it tells to display only from one document library.
My motive behind displaying data in the list view webpart is to achieve the functionality of Check In ,Check Out and other OOB features.
With Regards,
Jaskaran Singh

Hi,
As there is no such OOTB feature, a workaround is to create a visual web part to gather items from libraries and implement functionalities like Check in, Check out files
in different libraries.
The links below will provide more details:
Create Visual Web Parts in SharePoint
2010
A demo about displaying list items in visual web part:
http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx
About the Check In and Check Out:
How to Check In a document programmatically
SPFile.CheckIn method
and SPFile.CheckOut method
Best regards
Patrick Liang
TechNet Community Support

Display data from diferent tables

My requirement is to display data from diferent tables supose tables likeVBAK and VBAP.it will allow for all entries concept oops abap?.
how to write code for display data from diferent tables .
method WDDOINIT.
data:
node_sflight type ref to if_wd_context_node,
Itab_sflight type standard table of SFLIGHT.
select * from SFLIGHT into table Itab_sflight.
node_sflight = wd_context->get_child_node( name = 'SFLIGHT_NODE' ).
node_sflight->bind_table( itab_sflight ).
endmethod.
Thanks,
Rama

HI,
IS IT CORRECT WAY OF DONIG CODING?
IF I AM WORNG PLEASE SUGEST ME.
method WDDOINIT.
data:
node_sflight type ref to if_wd_context_node,
final type standard table of vbap.
types: begin of t_vbak,
vbeln type vbak-vbeln,
end of t_vbak.
endmethod.
data wa_vbak type t_vbak.
data i_vbak type standard table of t_vbak.
types: begin of t_vbap,
vbeln type vbap-vbeln,
posnr type vbap-posnr,
matnr type vbap-matnr,
end of t_vbap.
data wa_vbap type t_vbap.
data i_vbap type standard table of t_vbap.
select vbeln from vbak into table I_vbak.
select vbeln posnr matnr from vbap into table I_vbap
for all entries in I_vbak
where vbeln = i_vbak-vbeln.
loop at I_vbak.
read table i_vbap with key vbeln = I_vbak-vbeln.
final-vbeln = I_vbap-vbeln.
final-posnr = I_vbap-posnr .
final-matnr = I_vbap-matnr .
append final.
clear final.
endloop.
node_sflight = wd_context->get_child_node( name = 'NODE_VBAP' ).
node_sflight->bind_table( final ).
endmethod.
Thanks,
rama

Display data from CSV file in iWeb page

Hi,
I like to display data from a CSV file in iWeb page if a date value from CSV file matches todays value from the system. Here is an example.
CSV data values
01/20/2011,Sunny,87
01/21/2011,Cloudy,100
01/22/2011,Rainy,60
If today's date value is 01/21/2011 the page should display 01/21/2011 Cloudy 100 in a tabular format.
Appreciate your help in providing HTML code for this issue.
Thanks

I suspect there is a soft return in the excel database somewhere that can't be seen. Take the csv/txt file into notepad and look for a line that starts oddly compared to the others.
I haven't had luck removing soft returns from excel files so I do this a rather odd way. I take the excel file into InDesign as a table, and then use find/change to replace any soft returns with nothing, then convert the text to table and then export the text out again by going export, and selecting text from the dropdown menu.
For my money, I always save tab delimited text files from excel so that if a field does contain commas, it doesn't "trick" indesign into thinking a new field is beginning or not... instead the field delimiters are tabs and they are unlikely to have been used in the excel database.
If you do choose to use this indesign import method of mine to clean up the database, i also noticed two things in your screengrab: first was that some fields have spaces at the start of the text... easy enough to fix with a GREP that looks for ^\s (start of a sentence followed by a space) and replace with nothing. The second thing is the T&C field that all entries (at least in the screengrab) all start the same – if all entries in the database start the same, couldn't that line be in the indesign file? Its only a small detail I know.

Report not displaying data from one of the infoproviders

Hi Experts,
Issue: Report not displaying data from one of the infoproviders
I have a report 'ReportA' which has multiprovider MP1 as the source.
MP1 has two Infocubes IC1, IC2 in its design.
Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
Please reply.
Regards,
Suraj S Nair

Hi All,
When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
I checked the Characteristics, all of them are assigned corectly.
Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
Regards,
Suraj S Nair

How to extract data from BPC InfoCube via ABAP program?

Hi experts!!
I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
Is there any difference between extracting data from BPC and standard InfoCubes?
Thank you all!

Moderator message - Welcome to SCN.
But please do not cross and duplicate post.
Thread locked.
Rob

Short dump MESSAGE_TYPE_X in displaying data from BPC Virtualcube

Similar Messages

Maybe you are looking for