Short dump SAVE_NOT_ALLOWED while using CL_GUI_ALV_GRID in editable ALV
I created an editable ALV field and when i changed the value in that field and click tab or enter, then i am getting a shortdump. This is not happening regularly.
can anyone let me know the reason for this.
Sharath.
Hi
Set the handlers for the events DATA_CHANGED and DATA_CHANGED_FINISHED for your grid and handles changes in these methods accordingly.
*...local class definition
for event data_changed of cl_gui_alv_grid
importing er_data_changed,
handle_data_changed_finished
for event data_changed_finished of cl_gui_alv_grid
*...display the grid
call method grid1->set_table_for_first_display
exporting
i_bypassing_buffer = abap_true
i_structure_name = viewname
is_print = gs_print
is_layout = gs_layout
it_toolbar_excluding = i_exclude
i_save = 'A'
changing
it_outtab = <i_itab>
it_fieldcatalog = gt_fieldcat.
if sy-subrc ne 0.
exit.
endif.
set handler handle_double_click
handle_button_click
handle_user_command
handle_data_changed
handle_data_changed_finished
handle_onf4
handle_toolbar
for grid1.
regards
Isaac Prince
Similar Messages
-
Short Dump TSV_TNEW_PAGE_ALLOC_FAILED while using shared memory objects
Hi Gurus,
We are using shared memory objects to stor some data which we will be reading later. I have implemented the interfce IF_SHM_BUILD_INSTANCE in root class and using its method BUILD for automatic area structuring.
Today our developments moved from dev system to quality system, and while writing the data into the shared memory using the methods ATTACH_FOR_WRITE and DETACH_COMMIT in one report. We started getting the run time error TSV_TNEW_PAGE_ALLOC_FAILED.This is raised when the method DETACH_COMMIT is called to commit the changes in the shared memory.
Everyhting works fine before DETACH_COMMIT. I know that it is happening since the program ran out of extended memory, but I am not sure why it is happening at DETACH_COMMIT call. If excessive memory is being used in the program, this run time error should have been raised while calling the ATTACH_FOR_WRITE method or while filling the root class attributes. I am not sure why it is happening at DETACH_COMMIT method.
Many Thanks in advance.
Thanks,
RaveeshHi raveesh,
as Naimesh suggested: Probably system parameter for shared memory area is too small. Compare the system parameters in devel and QA, check what other shared memory areas are used.
Regarding your question, why it does not fail at ATTACH_FOR_WRITE but then on DETACH_COMMIT:
Probably ATTACH_FOR_WRITE will set an exclusive write lock on the shared memory data, then write to some kind of 'rollback' memory and DETACH_COMMIT will really put the data into shared memory area and release the lock. The 'rollback' memory is in the LUW's work memory which is much bigger as the usual shared memory size.
This is my assumption - don't know who can verify or reject it.
Regards,
Clemens -
Short Dump error while loading data from R/3 to ODS
Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
transfer program using the function Activate. Remove possible syntax
errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PMHi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani.... -
Short Dump created while modifying a process chain
Hi guys ,
Iam getting a short dump while trying to modify a process chain and it is taking me too short dump where the message is PROCESS HAS NO PREDECESSOR but even when Iam trying to DETAILED VIEW it is taking me too short dump
Can anyone help me out of this issueHi ,
I have removed the existing start process and I have checked but there is no Use the same short dump is created again
Please suggest me some usefull solution . -
Short Dump Error While Data load
Hi Experts,
Data load to an ODS in production server has been failed because of Short dump error. The error message shows " OBJECTS_OBJREF_NOT_ASSIGNED ".
Request you to please help me out with a solution ..
Regards,
VijayHi Vijay,
follow the steps below (May Help you)
Goto Monitor screen>Status Tab> using the wizard or the menu path >Environment -> Short dump> In the warehouse
Select the Error and double click
Analyse the error from the message.
1.-->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
Refresh the Transactional RFC screen and go to the Data Target(s) which have failed and see the status of the Request-->Now it should be green.
2.In some cases the above process will not work (where the Bad requests still exists after the above procedure).
In that case we need to go to the Data Targets and need to delete the bad requests and do the update again
Regards,
BH -
Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0
Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT 0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
BalarajThanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
" READ TABLE p_t_mapping ASSIGNING <fs_map>
WITH KEY target_stepid = 0
targetsegid = <fs_posit>-rulesegid
targetposit = <fs_posit>-ruleposit
targetid = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj -
Short Dump Error while executing the DTP
Hello Experts,
I am facing an issue with DTP.
Data has been loaded to PSA successfully but while executing the DTP for loading from PSA to DSO (WO) throwing a short dump RAISE_EXCEPTION.
Short text
Exception condition "NO_DS_LG_FOUND" raised.
"RAISE_EXCEPTION" " "
"SAPLRSSTATMAN" or "LRSSTATMANU1
"RSSTATMAN_GET_PARTTAB_PSA"
or
"SAPLRSSTATMAN" "NO_DS_LG_FOUND"
or
"RSAWBN_START " "NO_DS_LG_FOUND"
We are on BI support pack 14 SAPKW70014, searched for OSS notes but there are few for SP 12/ 13.
Did any body faced the simlliar issues,,,, please help
Appreicate your quick response.You may wish to check this
Note 1083305 - P16:STATMAN:Dump in function module RSM_INFOCUBE_WRITE_CHECK
Hope it Helps
Chetan
@CP.. -
Short Dump "ITAB_DUPLICATE_KEY" while executing DTP
Hi all,
i am getting a short dump when i try to execute the DTP to Cube, following is the error details.
i could not analyze the reason, need your inputs on this.
Runtime Errors ITAB_DUPLICATE_KEY
Date and Time 02/08/2009 21:33:53
Short dump has not been completely stored (too big)
Short text
A row with the same key already exists.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSAODS" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An entry was to be entered into the table
"\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key.
thanks,
RkHello Rk,
What is the data source??
whats is your SP level??
Seems like the data source is not properly activated or duplicate entries exists in the system tables for the same data source...
If you have recently done a system copy??
Try to activate the data source again...if its from R/3 then replicate and activate it again...also if its a BW object then try to reactivate it as well.
Thanks
Ajeet -
Short dump:ASSIGN_TYPE_CONFLICT- While loading data through DTP
Dear all:
We currently work with BI NW2004s SP10. We created transformation for mapping InfoSource and InfoCube based on 3.x transfer rule. For example, we used cube 0PUR_C04 and Data Source 2LIS_02_ITM_CP. And the transformation is "TRCS Z2LIS_02_ITM_CP -> CUBE 0PUR_C04". Everytime when we tried to load data via DTP. A runtime short dump occurred: ASSIGN_TYPE_CONFLICT
Error analysis:
You attempted to assign a field to a typed fie but the field does not have the required type.
we went back and forth to activated transformation and DTP. But still, same error occurred.
Any idea, please !!!!
BR
SzuFenHi Pavel:
Please refer to the following information-
User and Transaction
Client.............. 888
User................ "TW_S
Language key........ "E"
Transaction......... " "
Program............. "GPD0
Screen.............. "SAPM
Screen line......... 6
===========================================================
Information on where terminated
Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
"EXECUTE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 704
of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
Job Name....... "BIDTPR_284_1"
Job Initiator.. "TW_SZU"
Job Number..... 16454800
===========================================================
Short text
Type conflict with ASSIGN in program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
===========================================================
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
===========================================================
Information on where terminated
Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
"EXECUTE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 704
of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
Job Name....... "BIDTPR_284_1"
Job Initiator.. "TW_SZU"
Job Number..... 16454800
===========================================================
Line SourceCde
674 ELSE.
675 ASSIGN rdsTG_1->* to <_ys_TG_1>.
676 CLEAR <_ys_TG_1>.
677 MOVE-CORRESPONDING G1 TO <_ys_TG_1>.
678 <_ys_TG_1>-requid = l_requid.
679 l_recno_TG_1 = l_recno_TG_1 + 1.
680 ls_cross-insegid = 1.
681 ls_cross-inrecord = l_recno_SC_1.
682 ls_cross-outsegid = 1.
683 ls_cross-outrecord = l_recno_TG_1.
684
685 CALL METHOD i_r_log->add_cross_tab
686 EXPORTING
687 I_S_CROSSTAB = ls_cross.
688
689 ** Record# in target = sy-tabix - if sorting of table won't be changed
690 <_ys_TG_1>-record = l_recno_TG_1.
691 INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1>.
692 IF sy-subrc <> 0.
693 CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack.
694 ENDIF.
695
696 ENDIF. "Read table
697 *
698 ENDIF.
699 CLEAR skipseg_all.
700 ENDLOOP.
701 * -
insert table into outbound segment -
702
703 <_yt_TG_1>[] = <_yth_TG_1>[].
>>>>>
705 rTG_1->insert_table( rdtTG_1_dp ).
706 ENDMETHOD. "execute
707
708
709
710 endclass. "lcl_transform IMPLEMENTATION
711
712 &----
713 *& Form get_runtime_ref
714 &----
715 * text
716 ----
717 * -->C_R_EXE text
718 ----
719 form get_runtime_ref
720 changing c_r_exe type ref to object.
721
722 data: l_r_exe type ref to lcl_transform.
723 create object l_r_exe.
===========================================================
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Process
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 0TOTDELTIME
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070420
SY-UZEIT 164557
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
===========================================================
Active Calls/Events
No. Ty. Program Include
Name
6 METHOD GPD0QBVJ2WFQZZXBD0IJ1DSZAEL GPD0QBVJ2WFQZZXBD0IJ1DSZAEL
LCL_TRANSFORM=>EXECUTE
5 METHOD CL_RSTRAN_TRFN_CMD============CP CL_RSTRAN_TRFN_CMD============CM005
CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
4 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM00Q
CL_RSBK_PROCESS=>PROCESS_REQUEST
3 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM002
CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
2 FUNCTION SAPLRSBATCH LRSBATCHU13
RSBATCH_EXECUTE_PROCESS
1 EVENT RSBATCH_EXECUTE_PROZESS RSBATCH_EXECUTE_PROZESS
START-OF-SELECTION
===========================================================
Thank you and BR
SF -
Short Dump Error while loading master data.
Hello All,
I am trying to load data from PSA to Info Object (0Material_Attr) via DTP, I am getting error and itu2019s giving the short dump.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE.
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE".
In Job overview, job is getting cancelled, with error message
"The object name is not allowed to be empty".
ABAP/4 processor: UNCAUGHT_EXCEPTION.
We have done the following steps, even then error persist.
Transaction RSRV > All Elementary Tests > Master Data > Compare Number Range and Maximum SID for the characteristic 0REQUID.
If the system reports an error here, correct the error using the "Correct Error" function.
Kindly suggest.
Thanks in Advance .Error analysis from ST22
An exception occurred which is explained in The exception, which is assigned to class ' and therefore caused a runtime error.
The reason for the exception is: No text available for this exception
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE" -
Short dump with Where-used list
Hi All,
I'm making some research on specific InfoObjects, and in some cases I want to know where are they being used, but when I try to use the icon for "Where-used list using Data Warehouse" I end up with an error, a short dump.
Message class is: RSQBW
Trigger Location of Runtime Error:
Program: CL_RSQ_ISET_SERVICE===========CP
Include: CL_RSQ_ISET_SERVICE===========CM016
Row: 136
Module Type: (METHOD)
Module Name: EXTEND_FIELD_BUFFER
Does any one can help me to understand why is this going on and how to solve this?
Thank you!!
MiriamHi Miriam
In the short dump you should also see the name of the infoset in question.
You probably have to adjust the infoset in transaction RSISET and they try to run the where used list again.
Best Regards,
Vincent -
Short dump error while loading through infopackage
Hi Experts
When iam executing the infopackage it is taking (showing the Yellow staus)very long time
where as the no of records is lesss than 3000....
I made a check in ST22 it shows a short dump which is stating "RAISE_EXCEPTION" error
and still the process is in Yellow status in RSMO T.Code
Any help on this
Thanks Muchcheck the status of the background job , if job has faild
the reasion may be because of chaing in the extract structure in the source system.
so we can replicate the data source to resolve this issue.
And also make a check with extract structure using the T.coad RSA3, to find
no of records and to find out any chainges in the structure .
prasad. -
ABAP short dump error while creating an invoice
Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
ManjunathHi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna -
Dumping core while using rwFactory()- create( )
hi Guys!!!
I'm not sure if this is the right forum... but please help..
Please have a look at the code.
int main(int argc, char *argv[])
std::cout << "Begining of the program .. " << endl;
RWBag dummy; //might have to create a dummy RWBAG to link the correct code;
std::cout << "This program creates an RWBAG using theFactory"
<< std::endl;
RWBag* b=(RWBag*)(getRWFactory()->create(__RWBAG));
b->insert( new RWCollectableDate ); // Insert today's date
b->clearAndDestroy(); // Cleanup: first delete members,
delete b; // then the bag itself
return 1;
I am using Roguewave version 8 on Solaris 10.
The problem is the prg is dumping core while creating the RWCollectable object using (getRWFactory()->create(__RWBAG));
I'm not sure if it the type casting or in the create itself.
Thanks,
Rahul.It may be that an exception is being thrown that your not catching. Coherence exceptions need to caught as Exception::View not Exception::Handle. If there is an exception it's text should help identify if there was an issue running the updated server side.
Mark
Oracle Coherence -
Short dump error when using count(*)
Hi Experts
I am getting a short dump error when selecting the records >= current date - 30 see the coding and comment please correct the coding I want to know the ztable records it is important for command interface.
I have 1402345 records available after deleting the records but as the memory is not enough it is giving short dump error
select count(*) from ZINT_TABLE
select count(*) from ZINT_MSGS
select * from zint_data
nto table izint_d2 . "PACKAGE SIZE 20000
where STATUS = 'OK' AND CREATED_ON >= w_date1. " VALUE
endselect.**
report z_eslp_command_records.
data: cnt type i.
data: cnt2 type i.
data: cnt3 type i.
data: cnt4 type i.
DATA:
w_date1 like sy-datum .
DATA:
w_date2 like sy-datum.
data: izint_msgs type table of zint_msgs.
data: izint_data type table of zint_data.
data: izint_m2 type table of zint_msgs.
data: izint_d2 type table of zint_data.
INITIALIZATION.
w_date1 = sy-datum - 30.
w_date2 = sy-datum - 30.
select * from zint_data
into table izint_data PACKAGE SIZE 3000
where STATUS = 'OK' AND CREATED_ON <= w_date1. " ZERO
endselect.
select * from zint_msgs
into table izint_msgs PACKAGE SIZE 3000
where CREATED_ON <= w_date2. " ZERO
endselect.
select * from zint_data
into table izint_d2 PACKAGE SIZE 20000
where STATUS = 'OK' AND CREATED_ON >= w_date1. " VALUE
endselect.
select * from zint_msgs
into table izint_m2 PACKAGE SIZE 20000
where CREATED_ON >= w_date2. " VALUE
endselect.
select * from zint_data
into table izint_data2
where STATUS = 'OK' AND CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
select * from zint_msgs
into table izint_msgs2
where CREATED_ON >= CONVERT(CHAR(8), GETDATE() - 30, 112)).
ENDSELECT.
sort izint_data by created_on ascending.
sort izint_msgs by created_on ascending.
sort izint_d2 by created_on ascending.
sort izint_m2 by created_on ascending.
describe table izint_data lines cnt.
describe table izint_msgs lines cnt2.
describe table izint_d2 lines cnt3.
describe table izint_m2 lines cnt4.
write:/ ' Note: THE RECORDS COUNTED SHOULD SHOW ZERO ELSE THE SCRIPT FAILED TO RUN' color 3.
skip.
write:/ '1. Records counted in ZINT_DATA <=current date - 30 :' color 2, cnt color 4.
write:/ '2. Records available in ZINT_DATA >=current date - 30 'color 4, cnt3 color 4 .
skip.
write:/ '2. Records counted in ZINT_MSGS <=current date - 30 :' color 2 , cnt2 color 4.
write:/ '4. Records available in ZINT_MSGS >=current date - 30 'color 4 , cnt4 color 4 .
TOP-OF-PAGE.
WRITE:/55(60) ' WAGNERS INVESTMENT LIMITED '.
WRITE:/50(40) ' Command Interface Data' CENTERED .
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
SKIP.
"FORMAT COLOR COL_HEADING.
ULINE.
FORMAT COLOR 1.
END-OF-PAGE.Answer
Maybe you are looking for
-
Data Guard Standby DB Duplicate entries in v$archived_log - apply stopped
Hi I've got a perplexing problem... I have a number of archive logs that seem to have gotten duplicated (there are no other log files past or prior to this particular point). This duplication however has stopped the apply of the logs to the standby d
-
Fastest way to XMP tag movies?
Hello, My first post! I tryed a search but did not find anything on the subject. I have a gazillion of short movies to tag with XMP. Because I do not know the content of each movie, I play them one by one and WHILE they are playing, I either drag the
-
Published site gives corrupt rendering in browser
Publishing my site to a local folder and everything looks fine. (I cleared cache just to be sure). Publishing to my webhost and the site is all over the place. Again, I cleared cache in the browser just to be sure and even tried looking at the site w
-
Grid control cannot discover a database
I have an agent configured on a windows server with GC on linux. GC knows about the agent and can see the host. However, when I try and discover the database I keep getting connection time outs. The agent on the windows server is running and uploadin
-
Finding old emails in the Finder
Hi, there, My iMac is used for my business, so I keep (one can call it archive) many important emails in their specific folders, some emails are 4-5 years old. I'm wondering what is the system, or logic, based on how the operating system is keeping e