Short dump when executing the query

Hello Friends,
I have a query from MM area which I have insalled from Business Content , and when I try to go to the edit mode or try to excute the query I get a short dump which says "Missing elements ..", I get the same dump when executing from query designer or RSRT . At this time I'm not able to do a "check" on the query also n query designer since it doesnot allow me to go to the edit mode also . Any inputs greatly appreciated .
thanks ,

Hi,
While activating it from the Business Content, have you activated all the underlying objects also. Pls check that. It might help.

Similar Messages

How can i know which index will be used when executing the query ?

1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?

Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool

Incorrec entries when execute the query

hi,
   I am facing one problem when execute the query on inventory cube(non cumulative cube).Query is diplaying entries for valuated stock Qty.on particular date, but those entries are not exist in BIW(Infocube ,ODS) or R/3 System.
I checked cache parameters. all settings are correct.
if anyone has the idea on this pls. do the needful
Thanks n Regards,
HReddy.M
I

hello,
      Try to drill down the report based on request ID and find out one record which has this inconsistancy...! then see the data in the CUBE based on that Req ID and PSA..! may be this way will help u out..!
       Check FS10N/MB5B/MB5L Tcodes in R/3 for reconcilation!
             -EnjoySAP

Getting Short dump When Executing MIGO: SYNTAX_ERROR

Please Help,
I am getting this dump, when i hit MIGO transaction
Runtime Errors SYNTAX_ERROR
Date and Time 10.12.2008 08:28:03
 Short text
 Syntax error in program "MB_MIGO_BADI==================CP ".
 What happened?
 Error in the ABAP Application Program
 The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
 terminated because it has
 come across a statement that unfortunately cannot be executed.
 The following syntax error occurred in program
 "MB_MIGO_BADI==================CP " in include
 "MB_MIGO_BADI==================CM000 " in
 line 0:
 "The specified type cannot be converted into the target variables."
 The include has been created and last changed by:
 Created by: "SAP "
 Last changed by: "SAP "
 Error in the ABAP Application Program
 The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
 terminated because it has
 come across a statement that unfortunately cannot be executed.
 What can you do?
 Please eliminate the error by performing a syntax check
 (or an extended program check) on the program "MB_MIGO_BADI==================CP
 You can also perform the syntax check from the ABAP Editor.
 If the problem persists, proceed as follows:
 Note down which actions and inputs caused the error.
 To process the problem further, contact you SAP system
 administrator.
 Using Transaction ST22 for ABAP Dump Analysis, you can look
 at and manage termination messages, and you can also
 keep them for a long time.
 Error analysis
 The following syntax error was found in the program
 MB_MIGO_BADI==================CP :
 "The specified type cannot be converted into the target variables."
 How to correct the error
 Probably the only way to eliminate the error is to correct the program.
 If you cannot solve the problem yourself and want to send an error
 notification to SAP, include the following information:
 1. The description of the current problem (short dump)
 To save the description, choose "System->List->Save->Local File
 (Unconverted)".
 2. Corresponding system log
 Display the system log by calling transaction SM21.
 Restrict the time interval to 10 minutes before and five minutes
 after the short dump. Then choose "System->List->Save->Local File
 (Unconverted)".
 3. If the problem occurs in a problem of your own or a modified SAP
 program: The source code of the program
 In the editor, choose "Utilities->More
 Utilities->Upload/Download->Download".
 4. Details about the conditions under which the error occurred or which
 actions and input led to the error.
 System environment
 SAP-Release 700
 Application server... "DMATE"
 Network address...... "140.1.1.141"
 Operating system..... "Windows NT"
 Release.............. "5.2"
 Hardware type........ "4x AMD64 Level"
 Character length.... 16 Bits
 Pointer length....... 64 Bits
 Work process number.. 1
 Shortdump setting.... "full"
 Database server... "dmate"
 Database type..... "ADABAS D"
 Database name..... "AD0"
 Database user ID.. "SAPAD0"
 Char.set.... "C"
 SAP kernel....... 700
 created (date)... "Jun 23 2008 00:09:46"
 create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
 Database version. "SQLDBC 7.6.0.018 CL 119055 "
 Patch level. 166
 Patch text.. " "
 Database............. "MaxDB 7.6, MaxDB 7.7"
 SAP database version. 700
 Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
 NT 6.0"
 Memory consumption
 Roll.... 16192
 EM...... 8379680
 Heap.... 0
 Page.... 40960
 MM Used. 1627776
 MM Free. 2559440
 User and Transaction
 Client.............. 040
 User................ "LAKSHMI"
 Language key........ "E"
 Transaction......... "MIGO "
 Transactions ID..... "EE72C6DDC96BF1F99FA4001143E563CA"
 Program............. "CL_EX_MB_MIGO_BADI============CP"
 Screen.............. "SAPLMIGO 0001"
 Screen line......... 2
 Information on where terminated
 Termination occurred in the ABAP program "CL_EX_MB_MIGO_BADI============CP" -
 in "IF_EX_MB_MIGO_BADI~INIT".
 The main program was "SAPLMIGO ".
 In the source code you have the termination point in line 1
 of the (Include) program "CL_EX_MB_MIGO_BADI============CM001".
 Source Code Extract
 Line SourceCde
 >>>>> method IF_EX_MB_MIGO_BADI~INIT.
 2 CLASS CL_EXIT_MASTER DEFINITION LOAD.
 3
 4 DATA l_badi TYPE REF TO MB_MIGO_BADI.
 5
 6
 7
 8
 9
 10 TRY.
 11
 12 GET BADI l_badi
 13 CONTEXT me.
 14
 15 CALL BADI l_badi->INIT
 16
 17 CHANGING
 18 CT_INIT = CT_INIT.
 19
 20
 Contents of system fields
 Name Val.
 SY-SUBRC 0
 SY-INDEX 0
 SY-TABIX 1
 SY-DBCNT 1
 SY-FDPOS 1
 SY-LSIND 0
 SY-PAGNO 0
 SY-LINNO 1
 SY-COLNO 1
 SY-PFKEY
 SY-UCOMM
 SY-TITLE
 SY-MSGTY S
 SY-MSGID VBDOCUBATCH
 SY-MSGNO 001
 SY-MSGV1
 SY-MSGV2
 SY-MSGV3
 SY-MSGV4
 SY-MODNO 0
 SY-DATUM 20081210
 SY-UZEIT 082802
 SY-XPROG
 SY-XFORM
 Active Calls/Events
 No. Ty. Program Include Line
 Name
 4 METHOD CL_EX_MB_MIGO_BADI============CP CL_EX_MB_MIGO_BADI============CM001 1
 CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
 3 METHOD SAPLMIGO LMIGOGL2 54
 LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
 2 FORM SAPLMIGO LMIGOIN1 11
 INITIALIZATION
 1 MODULE (PBO) SAPLMIGO LMIGOPBO 11
 PBO_INITILIZATION
 Chosen variables
 Name
 Val.
 No. 4 Ty. METHOD
 Name CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
 CT_INIT
 Table[initial]
 %_DUMMY$$
 2222
 0000
 0000
 0000
 SYST-REPID
 CL_EX_MB_MIGO_BADI============CP
 4454554454444544443333333333334522222222
 3CF58FD2FD97FF2149DDDDDDDDDDDD3000000000
 0000000000000000000000000000000000000000
 0000000000000000000000000000000000000000
 SY-SUBRC
 0
 0000
 0000
 No. 3 Ty. METHOD
 Name LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
 SY-REPID
 SAPLMIGO
 5454444422222222222222222222222222222222
 310CD97F00000000000000000000000000000000
 0000000000000000000000000000000000000000
 0000000000000000000000000000000000000000
 LCL_MIGO_GLOBALS=>CNTL_ERROR
 2
 0
 0
 0
 ABAP_FALSE
 2
 0
 0
 0
 SYST-REPID
 SAPLMIGO
 5454444422222222222222222222222222222222
 310CD97F00000000000000000000000000000000
 0000000000000000000000000000000000000000
 0000000000000000000000000000000000000000
 GOSEARCH_PO
 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 TEXT-220
 Dest
 46772222
 45340000
 00000000
 00000000
 %_SPACE
 2
 0
 0
 0
 %_TAG*TS_GOITEM
 <initial>
 <initial>
 <initial>
 X
 X
 5
 8
 0
 0
 LCL_MIGO_GLOBALS=>IF_BADI
 F0000000
 70008000
 %_FL2*TV_GOFREIGHT
 <initial>
 <initial>
 <initial>
 %_PRINT
 000 0###
 2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 LCL_MIGO_GLOBALS=>T_BADI
 Table[initial]
 /SPE/CL_INB_ACTION_INFO=>C_DIALOG_MIGO
 SCREEN
 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
 OREF_TITLEBAR
 F0000000
 F0000000
 L_BADIS_1
 0
 0000
 0000
 SY-MSGID
 VBDOCUBATCH
 54444544544222222222
 624F3521438000000000
 00000000000000000000
 00000000000000000000
 OREF_TIP
 F0000000
 F0000000
 TV_GOSERIAL-CX
 <initial>
 <initial>
 <initial>
 SPACE
 2
 0
 0
 0
 SY-MSGNO
 001
 333
 001
 000
 000
 No. 2 Ty. FORM
 Name INITIALIZATION
 OREF_ARCH
 F0000000
 F0000000
 LCL_MIGO_GLOBALS=>KERNEL
 F0000000
 D0002000
 %_CX_TABLEVIEW_VERSION
 0
 3
 0
 0
 0
 GODEFAULT-DEF_XBOM
 2
 0
 0
 0
 LCL_MIGO_GLOBALS=>KERNEL->C_REFDOCTYPE_MATDOC
 MAT
 445
 D14
 000
 000
 No. 1 Ty. MODULE (PBO)
 Name PBO_INITILIZATION
 GOITEM-UMWRK
 2222
 0000
 0000
 0000
 GOITEM-UMNAME1
 222222222222222222222222222222
 000000000000000000000000000000
 000000000000000000000000000000
 000000000000000000000000000000
 Internal notes
 The termination was triggered in function "ab_genprog"
 of the SAP kernel, in line 1551 of the module
 "//bas/700_REL/src/krn/runt/abgen.c#10".
 The internal operation just processed is "CPOP".
 Internal mode was started at 20081210082802.
 Program name.........: "MB_MIGO_BADI==================CP ".
 Error message........: "The specified type cannot be converted into the target
 variables.".
 Active Calls in SAP Kernel
 Lines of C Stack in Kernel (Structure Differs on Each Platform)
 SAP (R) - R/3(TM) Callstack, Version 1.0
 Copyright (C) SAP AG. All rights reserved.
 Callstack without Exception:
 App : disp+work.EXE (pid=5776)
 When : 12/10/2008 8:28:3.84
 Threads : 2
 Computer Name : DMATE
 User Name : SAPServiceAD0
 Number of Processors: 4
 Processor Type: EM64T Family 15 Model 4 Stepping 1
 Windows Version : 5.2 Current Build: 3790
 State Dump for Thread Id 14f0
 FramePtr ReturnAd Param#1 Function Name
 0000000007eb8800 0000000077d7047f 00000000411b4070 ntdll!NtWaitForSingleObject
 0000000007eb88a0 000000000173b1d1 000000000000042c kernel32!WaitForSingleObjectEx
 0000000007eb8af0 00000000006179c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
 0000000007eb8b20 0000000000b05d9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
 0000000007eb8b70 0000000000b0afc0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7093)]
 0000000007eb9550 0000000000a51c94 0000000001d12320 disp+work!ab_rabax [abrabax.c (1231)]
 0000000007ebc220 00000000007f753a 0000000000000001 disp+work!ab_genprog [abgen.c (1555)]
 0000000007ebc2f0 00000000007f7dc8 00000000ffffffff disp+work!newload [abload1.c (336)]
 0000000007ebc350 00000000007f7e8e 0000000000000056 disp+work!ab_LoadProgOrTrfo [abload1.c (160)]
 0000000007ebc380 00000000007bc84d 000007fe725a5f70 disp+work!ab_LoadProg [abload1.c (78)]
 0000000007ebc450 00000000007be91a 00002a441022f402 disp+work!LoadGlobalClass [abobject.c (943)]
 0000000007ebc4a0 00000000007c1bdd 0000000000000000 disp+work!ab_FillCfix [abobject.c (1603)]
 0000000007ebc580 000000000083ae52 0000000000000000 disp+work!ab_jaboo [abobject.c (2248)]
 0000000007ebc700 0000000000a1ccb7 000000000000000d disp+work!ab_extri [abextri.c (554)]
 0000000007ebc750 0000000000ad50ac 000000000000000d disp+work!ab_xevent [abrunt1.c (281)]
 0000000007ebc7e0 0000000000679328 000000000000000d disp+work!ab_dstep [abdynpro.c (492)]
 0000000007ebc960 000000000067d02d 000007fe725d6f20 disp+work!dynpmcal [dymainstp.c (2396)]
 0000000007ebc9f0 000000000067ca2a 0000000000000000 disp+work!dynppbo0 [dymainstp.c (543)]
 0000000007ebcaa0 00000000006395c5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
 0000000007ebfc30 00000000004dbc4c 000000000000000c disp+work!dynpen00 [dymain.c (1646)]
 0000000007ebfeb0 000000000042f096 0000000007f62ff0 disp+work!TskhLoop [thxxhead.c (4538)]
 0000000007ebfee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1136)]
 0000000007ebff10 00000000019e84b1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
 0000000007ebff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
 0000000007ebffa0 0000000000000000 00000000019e8340 kernel32!BaseProcessStart
 State Dump for Thread Id b94
 FramePtr ReturnAd Param#1 Function Name
 000000000c9dfe40 0000000077d5f651 0000000000000000 ntdll!NtFsControlFile
 000000000c9dfeb0 00000000018ce23f fffffffffffffffe kernel32!ConnectNamedPipe
 000000000c9dff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
 000000000c9dff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
 000000000c9dffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
 List of ABAP programs affected
 Index Typ Program Group Date Time Size Lang.
 0 Prg SAPLMIGO 0 04.05.2008 12:54:34 1561600 E
 1 Prg SAPMSSYD 0 25.02.2008 17:02:32 21504 E
 2 Prg SAPFSYSCALLS 0 09.09.2004 14:18:32 7168 E
 3 Prg CL_MMIM_USERDEFAULTS==========CP 3 06.05.2002 10:42:38 21504 E
 4 Typ ESDUS 0 01.03.1999 13:36:04 2048
 5 Typ GOHEAD 0 07.02.2006 10:07:36 11264
 6 Typ MKPF 0 25.08.2005 22:02:19 7168
 7 Typ KBEFU 0 16.03.2008 17:46:49 6144
 8 Typ LFA1 0 16.03.2008 17:47:20 22528
 9 Typ MIGO_CUST_ACTION 0 30.11.1999 10:19:14 3072
 10 Typ MIGO_CUST_REFDOC 0 30.11.1999 10:19:14 2048
 11 Typ X031L 0 05.07.2005 13:10:15 6144
 12 Prg SAPLSDIFRUNTIME 12 19.11.2006 16:35:34 96256 E
 13 Typ DFIES 0 28.12.2004 17:06:45 10240
 14 Prg SAPLSDNT 14 09.03.2008 19:02:04 219136 E
 15 Prg SAPLSUGS 15 31.03.2006 11:23:11 47104 E
 16 Prg SAPLV01D 16 24.03.2008 17:03:30 40960 E
 17 Typ IWRKZ 0 04.04.1995 15:56:46 2048
 18 Typ TCUCH 0 07.01.2002 15:50:54 3072
 19 Typ TCUBN 0 07.01.2002 15:50:53 2048
 20 Typ TCUWS 0 13.08.1997 13:57:58 2048
 21 Typ TCUDRV 0 07.01.2002 15:50:54 2048
 22 Prg SAPLVBDOCUBATCH_BF 22 16.01.2004 14:28:56 10240 E
 23 Typ TCUDB 0 14.01.2004 10:05:59 2048
 24 Prg CL_GUI_CFW====================CP 24 28.02.2005 21:03:09 168960 E
 25 Prg CL_GUI_PROPS_CONSUMER=========CP 25 18.03.2008 13:25:33 29696 E
 26 Prg %_CCNTL 25 18.02.2005 14:15:08 15360 E
 27 Prg SAPLTHFB 27 18.03.2008 13:24:52 394240 E
 28 Typ EUDB 0 06.11.2003 20:28:08 8192
 29 Typ TCURM 0 01.03.2005 10:56:26 5120
 30 Prg CL_EXITHANDLER================CP 30 18.03.2008 13:11:35 30720 E
 31 Prg SAPLSEXV 31 18.03.2008 13:12:58 117760 E
 32 Typ SXS_ATTR 0 07.02.2006 10:09:24 5120
 33 Typ BADIISIMPLED 0 19.05.2005 19:10:34 3072
 34 Prg CL_ENH_BADI_TOOL_UTILITIES====CP 34 17.03.2008 11:03:36 13312 E
 35 Typ BADI_MAIN 0 08.12.2004 18:01:11 2048
 36 Typ BADI_IMPL 0 09.12.2004 19:05:43 3072
 37 Typ TADIR 0 07.02.2006 10:08:38 5120
 38 Prg CL_SWITCH=====================CP 38 17.03.2008 11:13:47 19456 E
 39 Typ SFW_PACKAGE 0 07.03.2008 12:18:16 2048
 40 Prg CL_ABAP_SWITCH================CP 40 14.10.2006 15:40:30 33792 E
 41 Prg SAPLPA_PACKAGE_SERVICES 41 18.03.2008 13:12:54 152576 E
 42 Typ TDEVC 0 08.12.2004 18:02:41 6144
 43 Prg CL_EX_MB_MIGO_BADI============CP 43 05.12.2008 17:09:58 30720 E
 44 Prg IF_EX_MB_MIGO_BADI============IP 30 19.05.2005 19:30:39 14336 E
 45 Typ SYST 0 09.09.2004 14:18:12 31744
 46 Typ GOSEARCH_PO 0 20.07.2001 19:17:34 4096
 47 Prg /SPE/CL_INB_ACTION_INFO=======CP 47 24.03.2008 20:30:06 20480 E
 48 Prg /SPE/IF_CONST=================IP 47 14.10.2006 18:49:02 7168 E
 49 Typ GODEFAULT 0 14.01.2004 10:04:46 5120
 50 Typ GOITEM 0 07.02.2006 10:07:36 65536
 Directory of Application Tables
 Name Date Time Lngth
 Val.
 Program SAPLMIGO
 SYST . . : : 00004612
 \0\0\0\0\x0001\0\x0370\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0
 GOITEM . . : : 00005524
 00000000000000000000
 GOSEARCH_PO . . : : 00000492
 GODEFAULT . . : : 00000220
 Program SAPLV01D
 TCUCH . . : : 00000122
 0401100020061029095148ANOOPJ 00000000000000
 TCUWS . . : : 00000060
 040020061227101454CONSULTANT
 TCUBN . . : : 00000060
 040020061227101454CONSULTANT
 TCUDRV . . : : 00000064
 00000000000000
 Program CL_GUI_PROPS_CONSUMER=========CP
 EUDB . . : : 00004068
 %CAA72C6DDAD55F1179FA4001143E563CA \0\0\0
 ABAP Control Blocks (CONT)
 Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
 94 BRAX 01 FFEB CL_EX_MB_MIGO_BADI============CM001 15
 95 CLEA 00 0020 CL_EX_MB_MIGO_BADI============CM001 15
 96 EXCP 08 0000 CL_EX_MB_MIGO_BADI============CM001 22
 97 BRAX 00 0005 CL_EX_MB_MIGO_BADI============CM001 22
 98 EXCP 00 0007 CL_EX_MB_MIGO_BADI============CM001 22
 99 BRAX 00 0003 CL_EX_MB_MIGO_BADI============CM001 22
 100 EXCP 07 0000 CL_EX_MB_MIGO_BADI============CM001 22
 101 BRAX 00 0001 CL_EX_MB_MIGO_BADI============CM001 23
 102 EXCP 0B 0000 CL_EX_MB_MIGO_BADI============CM001 23
 103 METH 01 0000 0000 0000 0000 0000 0000 0000 CL_EX_MB_MIGO_BADI============CM001 24
 107 -
 00 0000 CL_EX_MB_MIGO_BADI============CM001 24
 108 ABOO 02 0000 0005 0000 CL_EX_MB_MIGO_BADI============CM001 1
 >>>>> CPOP 00 0000 CL_EX_MB_MIGO_BADI============CM001 1
 111 -
 00 0000 CL_EX_MB_MIGO_BADI============CM001 1
 112 METH 04 0000 0005 0002 0000 0003 0000 0000 CL_EX_MB_MIGO_BADI============CM002 1
 116 PAR2 04 0000 C000 0000 CL_EX_MB_MIGO_BADI============CM002 1
 118 PAR2 04 0000 C001 0000 CL_EX_MB_MIGO_BADI============CM002 1
 120 PAR2 14 0000 C002 0000 CL_EX_MB_MIGO_BADI============CM002 1
 122 PAR2 14 0000 C003 0000 CL_EX_MB_MIGO_BADI============CM002 1
 124 PAR2 14 0000 C004 0000 CL_EX_MB_MIGO_BADI============CM002 1

Hai,
Seems to be problem with the Program.
Please check the point 'What Happened' in the dump for more details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
Take help from a ABAP consultant and try to check the syntax of the Program.
If you have access even you can check the syntax of the specified program from SE38.
Goto SE38 and put the program name and select 'Source code' and press F8, IN THE SOURCE CODE PAGE, press control+F2 and check whether there is any problem with the syntax or not.
If you find any take help from ABAP consultants.
Hope this helps.
Regards,
Yoganand.V

Dump while executing the Query

Hi,
when I try to execute the query I get the following dump.
ASSIGN_TYPE_CONFLICT
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
Pleaes assist , its urgent
Regards,
ANita

Hi,
The problem is Solved.
If the problem is occuring while running the query, regenerate the query through transaction RSRT.
Regards,
ANita

Dump while executing the query on MProvider on Stock and Billing

Hi,
I am getting this dump while executing a Query on Multiprovider. Here Multiprovider is on Billing cube(z-cube) and 0IC_C03 cubes. In the report , I have KF of both cubes. I am sure I never faced this type of problem in version 3.5. It seems we are going back day by day because of version 7.0.
A:
1) I am not getting any error if I take Kfs of only Billing cube in the
report on the multiprovider.
2) But I am getting this problem by taking only KF from 0IC_c03 on this multiprovider .
3) And also this problem is not raising in any queries(ofcourse same type) of those 2 cubes.
4) Here Fiscal Variant is constant filter, and User will enter the Fiscal year.
5) In the Columns area ,I have taken 12 selections each one restricted with one CALMONTH2.
6) in Rows part I have 3 selections. Here 2 selections have Billing KF and other selection has Blockd Stock qty KF.
B:
The above dump is not raising if I take 12 selections on columns with a restriction on 0CALMONTH with Customer exit varible , but different offsets in selections. Here the Customer exit variable gets April of the User entered Financial year as the value. But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system. Surprisingly issue is , Sales figures are comming proper.
I am on Version 7 and patch 13. And I am using Querydesigner 3.5.
Dump message: GETWA_NOT_ASSIGNED
Short text:
 Field symbol has not yet been assigned.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "RSDRC_NCUM_ROUTINES" had to be terminated because it has come across a statement that unfortunately cannot be executed.
keywords:
"GETWA_NOT_ASSIGNED" " "
"RSDRC_NCUM_ROUTINES" or "RSDRC_NCUM_ROUTINES"
"FILTER_SELDR"
Thanks and Regards,
Anil Kumar Sharma .P
Message was edited by:
 Anil Kumar Sharma
Message was edited by:
 Anil Kumar Sharma

OK,
I come back to my question: you said "But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system"
Can you say to which period this value correspond?
This looks like you are missing some characteristic identification in your multi.
Can you assess that?
Do you have the same time periods in both cubes? I mean, do you have at least the periods used in your RKF / query in both cubes? Would you mind pasting your identification for time IObjs from table RSDICMULTIIOBJ?
please see hereunder my identification for a sales and stock multicube
INFOCUBE OBJVERS IOBJNM PARTCUBE PARTIOBJ
ZMC021 A 0CALDAY ZICRT_C07 0CALDAY
ZMC021 A 0CALMONTH ZICRT_020 0CALMONTH
ZMC021 A 0CALMONTH ZICRT_C07 0CALMONTH
ZMC021 A 0CALMONTH2 ZICRT_020 0CALMONTH2
ZMC021 A 0CALMONTH2 ZICRT_C07 0CALMONTH2
ZMC021 A 0CALQUART1 ZICRT_020 0CALQUART1
ZMC021 A 0CALQUART1 ZICRT_C07 0CALQUART1
ZMC021 A 0CALQUARTER ZICRT_020 0CALQUARTER
ZMC021 A 0CALQUARTER ZICRT_C07 0CALQUARTER
ZMC021 A 0CALWEEK ZICRT_C07 0CALWEEK
ZMC021 A 0CALYEAR ZICRT_020 0CALYEAR
ZMC021 A 0CALYEAR ZICRT_C07 0CALYEAR
ZMC021 A 0FISCPER ZICRT_020 0FISCPER
ZMC021 A 0FISCPER ZICRT_C07 0FISCPER
ZMC021 A 0FISCPER3 ZICRT_020 0FISCPER3
ZMC021 A 0FISCVARNT ZICRT_020 0FISCVARNT
ZMC021 A 0FISCVARNT ZICRT_C07 0FISCVARNT
ZMC021 A 0FISCYEAR ZICRT_020 0FISCYEAR
ZMC021 A 0FISCYEAR ZICRT_C07 0FISCYEAR
note that here ZICRT_020 is a monthly stock cube.
hope that helps...
Olivier.

Difference between DB time OLAP time frontend time when execute the query

hi all,
can you any one explain the difference between DB time, OLAP time, frontend time when execute the query

Each BEx quey form a SQL query which is called query execution plan.
So,
DB Time is the time taken to read the record from data base by the SQL statement.
OLAP time is the time taken to process the calculations/formula involved.
Frontend Time is the time taken to present the output. For ex: while displaying the data in Bex analyser if your query involves a hierarchy, then the presentation time will be more. It also includes the time user taken to enter the query selection input.

Short Dump when activating the Workflow

Hi,
I have a problem, when i try to activate the workflow I get a short dump with the error "SYSTEM_NO_ROLL". As I understand the error is because there is no enough memory to the transaction, this is not the case i have checked that, so the error must be from my workflow definition or from the SAP it self.
Here goes the description:
The location of the error is in the method "FIND_ELEMENTS" of class "CL_SWF_CNT_CONTAINER". By this I understand that the error was with my container elements in the workflow but I have reviewed all my elements and I cant find any fault element or error. I can check the definition but if i try to activate it i get the short dump.
In the Calls Stack, there is +/- 69297 calls to the above method, because that method is recursive the transaction just consume all the memory and then i get short dump.
I use many multi line elements, for parallel processing with block step mostly, maybe its my container elements but i can find no wrong bindings or faulty elements.
Any help would be greatly appreciated.
Regards,
Diogo Silva.

Hi,
Ok didn't know, thanks for the help, i will post in the other section.
PS: Could you tell me how to reach that component, I tried but without success.
Regards,
Diogo Silva.
Edited by: DiogoSilva on Jun 15, 2011 7:01 PM

Short dump while executing the DTP

Dear Experts,
While executing the DTP the system is generated short dump and it is Quality server not in Development system.
The error details are in method Calculate_keyfigure_ds and the data is loaded for IS retails from POSDM.
The error details:
"The MOVE-CORRESPONDING statement can only be used on operands with a
structured type.
In the case at hand, this condition is not fulfilled: Operand "<L_STRUC>" has
the type "C"."
Regards,
Amit

Hi Amit ,
Move corresponding statements can be used for structures only and from the error message it seems that there is datatype mismatch.
Check for the errors ion link :
http://help.sap.com/abapdocu/en/ABAPMOVE-CORRESPONDING.htm
Hope it helps ,
Regards,
Supriya

Error when executing the query or refreshing the workbook

Hi All,
Whenever I am trying to execute a query or refresh a workbook a error message is poping up saying that
Error: <internal error> Problem when writing table: E_T_cel.
I face this error in few of the queries and when i refresh workbooks. These queries have lot of calculations and filters and they sum up lot of records.
Any help greatly appreciated.
Thanks
Raj.

Hi Maik,
Thanks for reply, I went into tran sm21 but i could not understand the messages there. Below is the list of messages in sm21
 System Log: Local Analysis of cdsap9d 1
From date/time............. 04/20/2005 / 10:00:00
To date/time............... 04/21/2005 /
User....................... KADALPR
Transaction code...........
Terminal...................
Task.......................
Problem class..............
Further restrictions.......
Sorted ? ................ SOFI
Pages with single entries 00000100
With statistics............
 System Log: Local Analysis of cdsap9d 2
Time Ty. Nr Cl. Tcod MNo Text Date : 20.04.05
12:58:10 DIA 0 100 R49 Communication error, CPIC return code 019, SAP return code 728
12:58:10 DIA 0 100 R5A > Conversation ID: 29858195
12:58:10 DIA 0 100 R64 > CPI-C function: CMSEND(SAP)
12:58:10 DIA 0 100 R68 Perform rollback
12:58:10 DIA 0 100 R47 Delete session 001 after error 003
23:54:49 DIA 1 100 R49 Communication error, CPIC return code 019, SAP return code 728
23:54:49 DIA 1 100 R5A > Conversation ID: 44959947
23:54:49 DIA 1 100 R64 > CPI-C function: CMSEND(SAP)
System Log: Local Analysis of cdsap9d 3
Time Ty. Nr Cl. Tcod MNo Text Date : 21.04.05
09:32:50 DIA 2 100 R49 Communication error, CPIC return code 019, SAP return code 728
09:32:50 DIA 2 100 R5A > Conversation ID: 83536783
09:32:50 DIA 2 100 R64 > CPI-C function: CMSEND(SAP)
Reading:
Number of records read......... 2777
Number of records selected..... 11
Old records skipped............ 2733
Records of invalid users skippe 33
Further selection:
Number of records read......... 11
Number of records selected..... 11
Number of records printed...... 11
End of system log
 System Log: Local Analysis of cdsap9d 4
 C o n t e n t s
Contents Page Start End
Selection criteria 1
 2 20.04.2005 12:58:10 - 23:54:49
 3 21.04.2005 09:32:50 - 09:32:50
Contents 4
End of program -
If you can help me out as where to look at these messages then it great.
Thanks,
Raj.

Short Dump when writing the file to Unix.

ST22 Dump Log.
Short text Error when writing to the file "/appl/data/backlog/outbound/bop_bwfcstngall_erp
What happened? Resource bottleneck
The current program "ZPS_BACKLOG_NEW_READ" had to be terminated because
a capacity limit has been reached.
_Error analysis
An error occurred when writing to the file
"/appl/data/outbound/bop_bwfcstngall_erp_20110919_151220.dat".
Error text: "A file, file system or message queue is no longer available."
Error code: 52

ask your basis collegues, the dump says that the file system was not available, so it is clear that your writing to Unix could not happen.
have a look into OSS Note 1100926 - FAQ: Network performance

Error when executing the query.

Hello ,
I have some customer exit variables used in my reports , and when I execute the report I get an error like " My variable name cannot be interpreted as number " The way I declared the variable is of customer exit type and as a Number, in my customer exit I'm using it as 'My variable" in computation , is this why ?
thanks ,

Hi Rakesh ,
Are you talking about a formula variable of type Customer Exit??? - Yes
Then if you have mentioned it as Number then it can only hold Numerical value and nothing else. - I dont see anyother option (dat type) which suits my rek. I need to declare a variable where user can enter a value like 2,3 ...12. And I have to use this variale in my customer exit code.
Diffferent options availble in BEx for a formula variable are ,
Number , Amount , Quantity , Price.
And in my customer exit I'm using as Y = X + 'My customer Exit Variable'.
Can you please give me your thoughts.
thanks alot.

Short dump when opening the segment builder

After the upgrade from CRM 4.0 to 2007, we are no longer able to open the Segment Builder. We always get a short dump (Message_type_X). Anyone encountered this problem before and has a solution?
Thanx in advance!

Hi,
though it is true that in CRM 2007 the GUI transactions should not be used anymore I am able to start the segment builder directly via transactioin CRMD_MKTSEG. It is working without a shortdump.
For documentation I suppose you have to refer to SAP: Help or the documentation available under service.sap.com. The blog posted here might be an alternative as well.
cheers Carsten

Short dump when executing report.

Dear all,
Im running a web template report which is calling a multiprovider and within the multiprovider are 9 cubes. All cubes have aggregates and are optimize for performance. Lately, for the past 2 days, users have been complaining that they keep getting error 500, a time out error. This happens only to certain users and not all. Some users are able to query for data more the 5 years where as some not even 1 day. Below is the error which BW is throwing back to us. Can you please help me analyze the error?
Error analysis
 After a certain length of time, the program is terminated. In the case
 of a work area, this means that
 - endless loops (DO, WHILE, ...),
 - database accesses producing an excessively large result set,
 - database accesses without a suitable index (full table scan)
 do not block the processing for too long.
Trigger Location of Runtime Error
 Program SAPLRSDRS
 Include LRSDRSF04
 Row 116
 Module type (FORM)
 Module Name FETCH_DATA_OPENSQL
103
104 IF <l_s_data> IS NOT ASSIGNED OR
105 <l_s_data> IS NOT ASSIGNED OR
106 <l_s_data_olap> IS NOT ASSIGNED .
107 RAISE EXCEPTION TYPE cx_rs_program_error
108 EXPORTING
109 method = 'FETCH_DATA_OPEN_SQL-2-'.
110 ENDIF.
111 ENDIF.
112
113
114 IF i_pkgsize <= 0.
115 * Reading all data with one single fetch
>>>>> FETCH NEXT CURSOR i_cursor
117 INTO CORRESPONDING FIELDS OF TABLE <l_t_data>.
118 e_eof = rs_c_true.
119 ELSE.
120 * Reading only one package
121 FETCH NEXT CURSOR i_cursor
122 INTO CORRESPONDING FIELDS OF TABLE <l_t_data>
123 PACKAGE SIZE i_pkgsize.
124
125 * If less than 'i_pkgsize' many tuples are read
126 * => end-of-data is reached
127 DESCRIBE TABLE <l_t_data> LINES l_count.
128 IF l_count <> i_pkgsize.
129 e_eof = rs_c_true.
130 ENDIF.
131 ENDIF.

Hi SCHT.
Error itself says that
"database accesses producing an excessively large result set,
- database accesses without a suitable index (full table scan)
do not block the processing for too long."
I believe there should be some change in query which causes aggregates to be excluded from selection.
Try running query from RSRT with option Execute + Debut ->Aggergates section select "Display aggregates found" and see the out put ..and watch whether aggregates are actually used.
Also some time this error happens because of network traffic , try running query in Bex Analyzer and see the run time.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Auto filter settings taking when executed the query for one user id......

Hi All,
We are facing one strange issue for one particular user id ( i.e for top management) ,when this user executes any of the report by in putting his own selection parameters say date 15.09.2009 and plant 1111 the output of the report is coming as 15.06.2009 to 19.06.2009 and the plant is also coming as 2222 instead of 1111.
I have checked it there are variants for this user id .
When i checked in the filters in portal it is showing for the cal day15.06.2009 to 19.06.2009,plant 2222,Materials Xyz,Keyfigures say Net amount only, nd more over its getting filtered onalso..... something there is a problem its taking automatic filter values.
What could be the issue does any one faced this kind of problem?
Pl help me out by providing your valuable inputs.
Rgds,
Rakesh

closed

Short dump when executing the query

Similar Messages

Maybe you are looking for