Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

Similar Messages

Short dump when running EWA report

Dear Expert,
I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_GUI_GP=====================CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Missing RAISING Clause in Interface
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     1
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Trigger Location of Exception
    Program                                 CL_GUI_GP=====================CP
    Include                                 CL_GUI_GP=====================CM017
    Row                                     19
    Module type                             (METHOD)
    Module Name                             IF_GRAPHIC_PROXY~EXPORT
Please advise asap since we need the report immediately.
Thank you in advance,
Rudi

Hi,
[This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
feel free to revert back.
--Ragu

Short dump when trying to open FPM for Web Dynpro Application

Hi,
I am receiving a short dump while trying to open a Web Dynpro Application in FPM. I go to SE80 and open the Web Dynpro component 'FPM_OIF_COMPONENT'. I then choose the application '/sapsrm/wda_l_fpm_oif'. I then click Web Dynpro Application -> Test -> Execute in Administration Mode. A new IE browser is opened and I then receive a short dump. The name of the short dump runtime error is 'OBJECTS_OBJREF_NOT_ASSIGNED_NO' and the exception is 'CX_SY_REF_IS_INITIAL'.
I have not used FPM before. I would like to use it to remove the 'Close' button from this application. Do I need to initialize FPM before using it?
Please help.
Thanks,
Jeff

>
Chinnu wrote:
> Hello Jeffery Andersen,
>
> If I understand correctly, you are trying to preview FPM_OIF_COMPONENT.
>
> I think this component can not be executed as it just is a template for creating a FPM applications. In other words, it is an interface that can be used to created a WD ABAP application from work bench.
>
> This [Floor Plan Manager - ABAP|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50&overridelayout=true] can help you understand better.
>
> Best regards,
> Chinnu
Hi Chinnu,
Your understanding is not correct, he is trying to execute the application /sapsrm/wda_l_fpm_oif'.
Hallo Jeff,
everyone have suggested lots of possibilities. Nothing works for you. I would suggest the following.
Go and execute any other FPM application which uses FPM_OIF_COMPONENT,does it work ?
If it works then you can narrow down that /sapsrm/wda_l_fpm_oif is not working and you can raise a OSS ticket.
If it is not working then you have to see if you have right BASIS versions to use FPM.
Edited by: Baskaran Senthivel on Dec 6, 2010 1:09 PM

RBDAP001 causing a short dump when submitted in a FM for IDOC processing

Hi All Gurus,
I have a situation wherein I need to automate the processing of failed INBOUND IDOCS.
So the status of failed IDOCS could be 51 or 64 or anything like that.
I tried using statement 'SUBMIT RBDAP001 with......'. in a custom FM , however I got a short dump.
When I debugged I realised that RBDAP001 pops up a screen with the final IDOC processing result which probably may be the cause of dump. Dump message is 'CNTL_ERROR'.
So is there a way how I can suppress this screen OR use any other function module to process these inbound Idocs.
Appreciate your advise on same.
Thanks and Regards
RK

Hi Rajiv,
Please use program RBDMANI2 to reprocess IDoc with status 51.
Also check program RBDINPUT for reprocessing IDoc with other statuses.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Short dump when I do total or sub total in the ALV report

Hi,
When I do total or sub-total on the currency field in the ALV report, it'll give a short dump like
" The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)".
 Short text of error message:
 Technical information about the message:
 Message classe...... "0K"
 Number.............. 000
 Variable 1.......... " "
 Variable 2.......... " "
 Variable 3.......... " "
 Variable 4.......... " "
 Variable 3.......... " "
 Variable 4.......... " "
Trigger Location of Runtime Error
 Program SAPLSLVC
 Include LSLVCF36
 Row 2,726
 Module type (FORM)
 Module Name FILL_DATA_TABLE
sometime when I do the page down on the ALV report, the same short dump is coming.
Can anyone help me out.
Thanks
Selva

Hi,
I'm getting this short dump in the standard program.
I'm getting ALV report display perfectly. the problem is, when I do total or subtotal on the currency fields.
2704
2705 ************************************
2706 * Column per Fieldcat Entry
2707 ************************************
2708 ls_lvc_data-value = space.
2709 clear ls_lvc_data-style.
2710 loop at it_fcat_local assigning <ls_fcat>
2711 where tech ne 'X' and no_out ne 'X'.
2712 if l_invisible eq 'X'.
2713 clear l_invisible.
2714 if <ls_fcat>-do_sum is initial.
2715 continue.
2716 else.
2717 clear ls_lvc_data-col_pos.
2718 endif.
2719 endif.
2720
2721 add 1 to ls_lvc_data-col_pos.
2722
2723 assign component <ls_fcat>-fieldname
2724 of structure <ls_data> to <l_field_value>.
2725 if sy-subrc ne 0.
>>>>> message x000(0k).
2727 endif.
2728
in this standard program, I'm getting the dump. the line is mentioned above in the code.

Short Dump when activating the Workflow

Hi,
I have a problem, when i try to activate the workflow I get a short dump with the error "SYSTEM_NO_ROLL". As I understand the error is because there is no enough memory to the transaction, this is not the case i have checked that, so the error must be from my workflow definition or from the SAP it self.
Here goes the description:
The location of the error is in the method "FIND_ELEMENTS" of class "CL_SWF_CNT_CONTAINER". By this I understand that the error was with my container elements in the workflow but I have reviewed all my elements and I cant find any fault element or error. I can check the definition but if i try to activate it i get the short dump.
In the Calls Stack, there is +/- 69297 calls to the above method, because that method is recursive the transaction just consume all the memory and then i get short dump.
I use many multi line elements, for parallel processing with block step mostly, maybe its my container elements but i can find no wrong bindings or faulty elements.
Any help would be greatly appreciated.
Regards,
Diogo Silva.

Hi,
Ok didn't know, thanks for the help, i will post in the other section.
PS: Could you tell me how to reach that component, I tried but without success.
Regards,
Diogo Silva.
Edited by: DiogoSilva on Jun 15, 2011 7:01 PM

Short Dump when trying to open C-project due to status

Hi,
We have a daily batch job in CRM that reports all the project ID's and
sends e-mails out to recipients.
As part of this report it retrieves the statuses for the project ID's,
however the report short dumps when retrieving the status for one of
the projects because it is not finding an active status.
When we try and open the project in C-projects we get the same short
dump error: CX_DPR_FATAL_ERROR so we cannot view or update the status.
When we investigate this issue we find that in table CRM_JCDS there are
3 entries for this project ID. One of the statuses is inactive (I1703)
but there is another status that is active (I1701). The two status
entries were created at exactly the same date and time and by the same
user.
In table CRM_JEST there is only one entry shown which shows an inactive
status and we believe this to be the wrong status. Please can you
advise if this status conflict is causing the problem and also how to
resolve this issue?

Hi Paul,
generally, the project and its elements must have an active status in table CRM_JEST, however, at this point it is not clear how this inconsistency arised. There is no SAP standard report or a 'generally valid' solution that could solve this issue, however, I found a customer message that you have opened in September with exactly the same problem. A colleague from the development team already provided you with a correction report, but there was no feedback from your side if it helped or not.
It is very difficult to provide help as inconsistencies can have several different causes, so the best would be to have this checked in a customer message with an example.
Regards,
Silvia

Facing short dumps when trying to open session in CSA

Hi
All am facing Short dump when i am trying to open session in CSA
Error detials:
go to System Administration workcenter task management up CSA. Choose the Solution
got short dump:
Short text
    Length error occurred in IMPORT statement.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "LOAD" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
Missing RAISING Clause in Interface
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.431
    Module type                             (METHOD)
    Module Name                             LOAD
Trigger Location of Exception
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.514
    Module type                             (METHOD)
    Module Name                             LOAD
Please help me to solve this problem
Regards,
Neni

Hello Neni
According to the information I saw in that post it could be caused by a sort of inconsistency of the program code vs a structure.
Wether that is a bug that is in your SAP Solution Manager release or something that is caused by administrative actions (perhaps solving SPAU entries after SP stack update or upgrade) I cannot tell.
I would recommend you either try and find a relative SAP note (narrowing down result to only your SAP Solution Manager system) and searching using the dump keywords. If you cannot find anything I would recommend you to open a customer message so SAP can take a look at the specific error.
If you give more information, perhaps someone on the forum can help you out abit better, which SAP Solution Manager version and so on.
You also didn't answer my question, any recent changes you are aware of ?
Kind regards
Tom

Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation

Hi experts,
We are running SRM 5.5 with Support Level 16.
We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
ITEM 1: HIER (Bid Outline)
ITEM 2: Line Item
ITEM 3: HIER (Bid Outline)
ITEM 4: Line Item
However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
Transaction: BBP_BID_INV
Program: SAPLBBP_PDH
Screen: SAPLBBP_BID_INV_1000
Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
In the source code you have the termination point in line 73.
Active Calls/Events
(formatted below as "No: Type: Name")
24: Function: BBP_PD_ABORT
23: Form: ABORT
22: Form: ITMADM_UPDATE
21: Form: ITMADM_MAINTAIN_SINGLE
20: Form: ITEM_F_CHECK_FROM_WTAB
19: Form: ITEMLIST_F_CHECK
18: Function: BBP_ITEMLIST_CHECK
17: Form: PROCDOC_DB_CHECK
16: Form: PROCDOC_CHECK
15: Function: BBP_PROCDOC_CHECK
14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
13: Form: STATUS_SET_AND_INTERNAL_SAVE
12: Form: PROCDOC_UPDATE
11: Function: BBP_PROCDOC_UPDATE
10: Form: CHANGE_VERSION_UPDATES_ACTIVE
9: Function: BBP_PDCV_UPDATE_ACTIVE
8: Form: PROCDOC_CHECK
7: Function: BBP_PROCDOC_CHECK
6: Function: BBP_PD_BID_CHECK
5: Form: FCODE_DOCUMENT_CHECK
4: Form: FCODE
3: Function: BBP_BID_PROCESS
2: Form: PROCESS
1: Module (PAI): PROCESS
The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
* parent guids have to be identical ...
if gt_itmadm-parent <> w_itmadm-parent.
perform abort.
endif.
Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
Any suggestions would be greatly appreciated.
Thanks!
Best regards,
Kwong How

Hi Janu,
For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
Otherwise, we will raise a message as suggested.
Thank you so much for your help!
Best regards,
Kwong How

GETWA_NOT_ASSIGNED short dump when load business partner master data

Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.

Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

ASSERTION_FAILED short dump when Transporting Transformation from Dev to QA

Hi Experts,
I' am getting a short Dump when transporting the transformations, DSO & DTPs from Dev server to QA.
I got RC=12, Please have a look below....
Transport log...
    BCQ        System BCQ
               Selection for Import                     08.07.2010 15:28:59    (0) Successfully Completed
               Import                                   08.07.2010 15:35:14    (0) Successfully Completed
               Check Versions                           08.07.2010 15:35:14    (0) Successfully Completed
               Method Execution                         08.07.2010 15:36:20   (12) Canceled
               Import                                   08.07.2010 15:45:39    (0) Successfully Completed
               Check Versions                           08.07.2010 15:45:39    (0) Successfully Completed
               Method Execution                         08.07.2010 15:46:45   (12) Canceled
and the Log detalis.....
Date        Time      Message
08.07.2010 15:35:15 Job started
08.07.2010 15:35:15 Step 001 started (program RDDEXECL, variant , user ID DDIC)
08.07.2010 15:35:15 All DB buffers of application server sxcat136 were synchronized
08.07.2010 15:35:21 STDO: Log could not be written on output device T
08.07.2010 15:35:30 Replication completed successfully
08.07.2010 15:35:31 Struttura di comunicazione /BIC/CS8ZFIZIASA activated
08.07.2010 15:35:40 Regola(e) di trasm. 8ZFIZIASA_AA activated
08.07.2010 15:35:47 ABAP/4 processor: ASSERTION_FAILED
08.07.2010 15:35:47 Job cancelled
Even I've checked the entries on the table RSTRANRULE for those Transpormations but there I got...all the entries with...
RULEID = all numbers
GROUPID = '1' or '2'
GROUPTYPE = 'S' or 'T'
REF_RULE ='0'
we are in to SAP_BW Release 700, Level 0013, SP -SAPKW70013, SAP NetWeaver BI 7.0
Pls help if any one know's the solution for this.
Thanks in adv.
BR,
Ajay Kumar
Edited by: sap.ajaykumar on Jul 9, 2010 12:48 PM

Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Follow the steps mentioned in OSS note 998730.
FYI.. Solution:
Call transaction SE16 (Table Browser) and the 'RSTRANRULE' table with the following selection parameters:
GROUPID = 'space'
GROUPTYPE = 'space'
REF_RULE 'space'
If there are inconsistent entries in the RSTRANRULE table such as this:
TRANID *
OBJVERS *
RULEID *
SEQNR *
GROUPID 00
GROUPTYPE space
RULETYPE space
REF RULE *
Delete these entries from the table.
Activate the affected transformations.
Also check the OSS note: 1006658.
Also check the oSS note : Note 975675 - Transformation cannot be activated

Short dump when we write more than 4 routines or formulas 4 one source fld

Hi Experts ,
We have one source field in a DSO which supplies data to 9 other characteristics present in the cube via formulas. But the system throws a short dump when we write more than 4 routines or formulas.
Please let us know if there is any restriction in BI 7 as to let only 4 formulas to be written for one source field.
The below is the description of the short dump
RUNTIME ERROR : SAP SQL_ARRAY_INSERT_DUPREC
EXCEPTION : CX_SY_OPEN_SQL_DB
Help done would be assigned points ...
Thanks,
Santosh ...

Hi,
thanks for your input
Rd, rt,re and rs are ranges.
Select ranges
RANGES: rd FOR ZMOBILEDATA-COMPID,
          rs FOR ZMOBILEDATA-SUBSCRIBERS,
          rt FOR ZMOBILEDATA-TURNOVER,
          re FOR ZMOBILEDATA-ENTRYDATE.
thanks'

Short dump when assigning revision to notification (iw22)

Hello!
We have a short dump when we try to assign a revision to a notification in iw22.
The dump occurs when we save after assigning a revision. We have the lollowing message:
Message CO888 : Error when reading order header with index
Include LCOBHIC2, line 39
The OSS note 1101437 doesn't solve our problem.
Can you help me?
Thanks by advance,
Laurent.

I tried your tests.
I haven't a dump neither for the first test nor for the second one.
The dump occurs only when:
- I create a notification
- i create an order and assign it to this notification.
- i save the notification and the order
- i assign a revision to the notifiaction and save
There isn't dump if i assign revision number before the order creation. In fact, the dump only occurs if a assign a revision number after the assignment of the order to the notifiation.
I'm checking user exit.
Thanks,
Laurent.

Short Dump when deleting CMR/DMR

Hi,
When I delete a CMR or DMR the system hangs and I get a Short Dump. I have traced the line where the dump is occuring, but cannot figure why the error/short dump occurs.
INCLUDE FV45KFKD_VBKD_FUELLEN_TEIL_2
FORM VBKD_FUELLEN_TEIL_2 USING VALUE(US_POSNR)
IF NOT DA_WARNUNG IS INITIAL AND
 SVBKD-TABIX > 0.
 CLEAR DA_WARNUNG.
 IF VBKD-FKDAT EQ DA_FKDAT.
 SET CURSOR FIELD 'VBKD-FKDAT'.
 WRITE VBKD-FKDAT TO DA_DATUMC DD/MM/YYYY.
 MESSAGE W221 WITH DA_DATUMC. <== The error is occuring when this statement is exceuted.
 ENDIF.
ENDIF.
Although the short dump thing the error occurs when trying do the next ste PERFORM VBKD_FUELLEN_IAOM USING US_POSNR.
Thanks in advance
Naing

I would check if you have any code in userexit_check_vbkd for example.
NOTE: sapmv45a processes not only sales orders but contracts, CMR/DMR,... so please be careful with your code in userexits and make sure you restrict it to proper document types/transactions.
Ideally you need to write your userexits in such a way that they all can be switched-off easily (like put all code in each userexit between if sy-uname = 'SAPLOOK' ... endif. for example) in this case when you are logged on with SAPLOOK ID - userexits are off.
The bottom line is - if you are able to perform any action (delete DMR/CMR) when your exits are OFF -> the problem is somewhere in your exits.
The problem may NOT be in the code where dump occurs, it can be well in advance
One small flag or incorrect read statement which re-sets workarea of internal table in one of your userexits may cause problems down the line.

User input screen in the Bex report

Hi experts,
In the input screen of a BEx report, suppose for Business Area if we have 10 values in the infoprovider
then if user entered other than the 10 values then it should give me an error message saying that enter a
correct value.But right now it is not happening like that. How to get this ?
Regards,
Smitha.

Hi,
I kept some breakpoints and executed the query, but it is not going into debug mode.
In the code when clicked on Code Inspector the following errors came:
1.Program XRSR Include ZXRSRU01 Row 143 Column 0
Large table /BIC/AZSM_DSO00: No WHERE condition
2.Program XRSR Include LXRSRU05 Row 19 Column 0
Der Typ des VALUE-Parameters "E_THX_MAPPING" enthält eine
oder mehrere Tabellen, die als Zeilentyp wiederum interne
Tabellen enthalten (Siehe Test-Dokumentation).
3.Program XRSR Include LXRSRU05 Row 19 Column 0
oder mehrere Tabellen, die als Zeilentyp wiederum interne
Tabellen enthalten (Siehe Test-Dokumentation).
4.Program XRSR Include LXRSRU05 Row 19 Column 0
Der Typ des VALUE-Parameters "I_THX_SENDER" enthält eine
oder mehrere Tabellen, die als Zeilentyp wiederum interne
Tabellen enthalten (Siehe Test-Dokumentation).
5.Message Code 1002
Program XRSR Include LXRSRF00 Row 94 Column 0
The EXCEPTION "X_RAISE" is not defined in the interface of the function module
"RRMS_X_MESSAGE". "RRMS_X_MESSAGE".
Internal Message Code: MESSAGE G-7
==> The EXCEPTION "X_RAISE" is not defined in the interface
of the function module "RRMS_X_MESSAGE".
"RRMS_X_MESSAGE". Internal Message Code: MESSAGE G-7
6.Message Code 1700
Program XRSR Include ZXRSRU01 Row 157 Column 0
Char. strings w/o text elements will not be translated:
'Enter Correct value for FISCPER'
==> Char. strings w/o text elements will not be
translated: 'Enter Correct value for FISCPER'
Please help me in checking these errors.
Regards,
smitha.

Short Dump when the Bex-Report scheduled for Broadcast

Similar Messages

Maybe you are looking for