Short Dump when trying to change configuration of BT112H_SC/OVViewSet (Service Contracts)

Hi Experts,
I have a problem with a component usage when trying to change the OverviewSet Configuration for the Service Contract. The whole component BT112H_SC is complete standard and no enhancements have been made yet.
When trying to change the configuration of the view OVViewSet there appears the error message:
'500 SAP Internal Server Error'
Error: Define Component Usage 'CUIR_Container' (termination: Rabax_State)
The place where the code dumps is shown in the attached picture with the name 'ST22'. The error screen when trying to change of the configuration is shown in the attached picture 'Configuration'
It seems like one error is appearing in Line 18 of the class CL_BSP_WD_REPOSITORY and method GET_CMP_USAGE_DEF:
Method: GET_CMP_USAGE_DEF.
method GET_CMP_USAGE_DEF.
   field-symbols: <USAGE> type BSP_WD_CMP_USAGE_DESCR.
   read table ME->USAGES with key USAGE_NAME = IV_USAGE_NAME
                         assigning <USAGE> binary search.
   if SY-SUBRC = 0.
*   Is usage active?
     if CL_WEBCUIF_SWITCH=>IS_ACTIVE( IV_SWITCH_ID = <USAGE>-SFW_DATA-SWITCH_ID
                                      IV_REACTION = <USAGE>-SFW_DATA-REACTION ) ne ABAP_TRUE.
*     usage switched off
       raise exception type CX_BSP_WD_INCORRECT_IMPLEMENT
         exporting
           TEXTID = CX_BSP_WD_INCORRECT_IMPLEMENT=>ACCESS_2_INACTIVE_ELEMENT
           NAME   = IV_USAGE_NAME.
     endif.
     RS_RESULT = <USAGE>.
   else.
   raise exception type CX_BSP_WD_INCORRECT_IMPLEMENT
       exporting
         TEXTID = CX_BSP_WD_INCORRECT_IMPLEMENT=>UNDEFINED_CMP_USAGE
         NAME   = IV_USAGE_NAME.
   endif.
endmethod.                    "GET_CMP_USAGE_DEF
Any Ideas? Do I have to create the component usage manually?

Hi Oliver,
Go to RTR->Viewset->OVViewset-> see whether any view 'CUIR_CONTAINER' is there in that viewset.
If it is there then u need to create component usage of that view. Or else remove that view from viewset.
Regards,
Arun

Similar Messages

Short dump when trying to change DTP status to 'green'

Hi,
For a DTP delta run that brings in 0 records, the technical status turn green after 5-6seconds. But the overall status remains in yellow state.
Also if we manually try to set it to 'red', I am able to do so and delete this request and run a new request, but again it ends with overall status yellow.
If I try to set it to 'green' manually following short dump occurs:
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           SAPLRSMDATASTATE
Application Component BW-WHM-DST
I have already scanned all SAP notes relevant for this short dump, but none of them relates to this scenario.
Please let me know if anyone faced this issue anytime, and how was it solved?
Version : BW 7.02 SP14
Regards,
Rathy

Hello Rathy,
You can do following things,
From message, it is apparent that there is Error in one of the ABAP Program . And as the Error is occurring within few seconds of the Start of DTP, can you check and debug the Start Routine .
If Start Routine is not there, try to check whatever ABAP routine are there in facilitating the processing.
( Routine in relevant Application Componenrt - BW-WHM-DST )
Before this, can you also check the ABAP Dump through ST22 and make sure that the underlying datasource ( for DTP ) is OK and smooth.
Try to proceed in that way.. Hope this helps !
Regards
YN

Facing short dumps when trying to open session in CSA

Hi
All am facing Short dump when i am trying to open session in CSA
Error detials:
go to System Administration workcenter task management up CSA. Choose the Solution
got short dump:
Short text
    Length error occurred in IMPORT statement.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "LOAD" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
Missing RAISING Clause in Interface
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.431
    Module type                             (METHOD)
    Module Name                             LOAD
Trigger Location of Exception
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.514
    Module type                             (METHOD)
    Module Name                             LOAD
Please help me to solve this problem
Regards,
Neni

Hello Neni
According to the information I saw in that post it could be caused by a sort of inconsistency of the program code vs a structure.
Wether that is a bug that is in your SAP Solution Manager release or something that is caused by administrative actions (perhaps solving SPAU entries after SP stack update or upgrade) I cannot tell.
I would recommend you either try and find a relative SAP note (narrowing down result to only your SAP Solution Manager system) and searching using the dump keywords. If you cannot find anything I would recommend you to open a customer message so SAP can take a look at the specific error.
If you give more information, perhaps someone on the forum can help you out abit better, which SAP Solution Manager version and so on.
You also didn't answer my question, any recent changes you are aware of ?
Kind regards
Tom

Short dump when trying to see the text elements of main window

Hi ,
The form is running properly in 4.7 c . But when the same is copied in ECC5.0 (unicode) , i 'm getting short dump while trying to see the TEXT ELEMENTS .
The message is like ' trying to create a field with zero length'.
Regards,
Jytoi.

hi
I've never worked on ECC 5.0 version..however, I can only tell u that this could be the issue that code written in 4.7 may not be supported in 5.0..so try to get a good idea of ECC 5.0 before u start coding in this..
regards,
shamim

Short Dump when trying to open C-project due to status

Hi,
We have a daily batch job in CRM that reports all the project ID's and
sends e-mails out to recipients.
As part of this report it retrieves the statuses for the project ID's,
however the report short dumps when retrieving the status for one of
the projects because it is not finding an active status.
When we try and open the project in C-projects we get the same short
dump error: CX_DPR_FATAL_ERROR so we cannot view or update the status.
When we investigate this issue we find that in table CRM_JCDS there are
3 entries for this project ID. One of the statuses is inactive (I1703)
but there is another status that is active (I1701). The two status
entries were created at exactly the same date and time and by the same
user.
In table CRM_JEST there is only one entry shown which shows an inactive
status and we believe this to be the wrong status. Please can you
advise if this status conflict is causing the problem and also how to
resolve this issue?

Hi Paul,
generally, the project and its elements must have an active status in table CRM_JEST, however, at this point it is not clear how this inconsistency arised. There is no SAP standard report or a 'generally valid' solution that could solve this issue, however, I found a customer message that you have opened in September with exactly the same problem. A colleague from the development team already provided you with a correction report, but there was no feedback from your side if it helped or not.
It is very difficult to provide help as inconsistencies can have several different causes, so the best would be to have this checked in a customer message with an example.
Regards,
Silvia

Short dump when trying to open FPM for Web Dynpro Application

Hi,
I am receiving a short dump while trying to open a Web Dynpro Application in FPM. I go to SE80 and open the Web Dynpro component 'FPM_OIF_COMPONENT'. I then choose the application '/sapsrm/wda_l_fpm_oif'. I then click Web Dynpro Application -> Test -> Execute in Administration Mode. A new IE browser is opened and I then receive a short dump. The name of the short dump runtime error is 'OBJECTS_OBJREF_NOT_ASSIGNED_NO' and the exception is 'CX_SY_REF_IS_INITIAL'.
I have not used FPM before. I would like to use it to remove the 'Close' button from this application. Do I need to initialize FPM before using it?
Please help.
Thanks,
Jeff

>
Chinnu wrote:
> Hello Jeffery Andersen,
>
> If I understand correctly, you are trying to preview FPM_OIF_COMPONENT.
>
> I think this component can not be executed as it just is a template for creating a FPM applications. In other words, it is an interface that can be used to created a WD ABAP application from work bench.
>
> This [Floor Plan Manager - ABAP|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50&overridelayout=true] can help you understand better.
>
> Best regards,
> Chinnu
Hi Chinnu,
Your understanding is not correct, he is trying to execute the application /sapsrm/wda_l_fpm_oif'.
Hallo Jeff,
everyone have suggested lots of possibilities. Nothing works for you. I would suggest the following.
Go and execute any other FPM application which uses FPM_OIF_COMPONENT,does it work ?
If it works then you can narrow down that /sapsrm/wda_l_fpm_oif is not working and you can raise a OSS ticket.
If it is not working then you have to see if you have right BASIS versions to use FPM.
Edited by: Baskaran Senthivel on Dec 6, 2010 1:09 PM

Short dump when trying to download alv( reuse_alv_grid data) into excel

Hi SAPAll.
here i have got one alv report ,when executing this alv report it displays in correct way but the only problem is when i click on the icon(local file) which exists at standard tool bar at the top to dowbload into local excel file it is raising the runtime error as
The current statement requires a character-type data object.
at happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
ror analysis
At the statment
"STRLEN( obj )..."
, only character-type data objects are supported at the argument
position "obj".
In this particular case, the operand "obj" has the non-charcter-type type
"P".
igger Location of Runtime Error
Program SAPLKKBL
Include LKKBLF99
Row 3.948
Module type (FORM)
Module Name GEN_FIELD_OUT2
Line SourceCde
3923 * Bei NUMC führende '0' und ' ' nicht berücksichtigen
3924 elseif gs_fc-tech_form = 6.
3925 write to gs_out-hlpchar no-zero left-justified.
3926 if gs_fc-just = 'R'.
3927 condense gs_out-hlpchar.
3928 endif.
3929 gs_out-hlplen = strlen( gs_out-hlpchar ).
3930 elseif gs_fc-tech_form = 11. "INS TECH11
3931 * Min. Ausgabelänge für ein Datum ist immer 8
3932 if gs_fc-datatype = 'DATS'. "INS TECH11
3933 gs_out-hlplen = 8. "INS TECH11
3934 * Min. Ausgabelänge für eine Uhrzeit ist immer 6
3935 elseif gs_fc-datatype = 'TIMS'. "INS TECH11
3936 gs_out-hlplen = 6. "INS TECH11
3937 endif. "INS TECH11
3938 elseif gs_fc-tech_form = 1 or gs_fc-tech_form = 90.
3939 * Überführung int. in ext. Format via Konvertierungsexit
3940 if not gs_fc-convexit is initial or "INS TECH11
3941 not gs_fc-inttype ca 'CN'.
3942 * elseif not gs_fc-convexit is initial. "DEL TECH11
please respond at ur time

Hi,
Verify your field_cat, because the element (column) with value (type P) may be defined with the parameter inttype = 'C' or inttype = 'N'.
You have to change to inttype = 'P' .
Best regards,
Leandro Mengue

Short Dump when trying to display transformations.

hello Experts,
When I am trying to display the rule details in the transformations i am facing the follwing shortdump messages. I just want to see the rooutine in the rule details of the transformation.Could you please help me to resolve this issue.
"MESSAGE_TYPE_X" " "
"CL_RSTRAN_STEP_ROUT===========CP" or "CL_RSTRAN_STEP_ROUT===========CM008"
"MAINTAIN_ROUT"
Regards,

Step 1: After u see the error message when you open the transformation, try TC su53. This will tell you if you are missing any authorization.
Step2 : If everything is fine! Is your Tran 'deactivated' id 'white' in color ? Activate you source n target again & try to open the TRAN

Short dump when trying to Select date in Field

Hi,
I created generic data source based on Function Module. I went to RSA3 to test the extraction and I got this error message when I tried to enter a date as input selection in date field or any other selection field
If I test the extraction without any input I get correct results.
Whats the reason for this error?
*Error analysis
   The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
   statement in which the WHERE condition contains an IN itab operator.
   The IN itab operator is used with internal tables which
   have the following structure:
      SIGN(1)   OPTION(2)   LOW LIKE db_field   HIGH LIKE db_field
   The OPTION column should contain only one of the following values:
      "EQ LE GE CP BT NE LT GT NP NB"
Function module code
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'COMPID'.
        MOVE-CORRESPONDING L_S_SELECT TO rd.
        APPEND rd.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'SUBSCRIBERS'.
        MOVE-CORRESPONDING L_S_SELECT TO rs.
        APPEND rd.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'TURNOVER'.
        MOVE-CORRESPONDING L_S_SELECT TO rt.
        APPEND rd.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'ENTRYDATE'.
        MOVE-CORRESPONDING L_S_SELECT TO re.
        APPEND rd.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM ZMOBILEDATA
                               WHERE COMPID IN rd AND
                                     SUBSCRIBERS IN rs AND
                                     TURNOVER IN rt AND
                                     ENTRYDATE IN re.
    ENDIF.                             "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
Thanks

Hi,
thanks for your input
Rd, rt,re and rs are ranges.
Select ranges
RANGES: rd FOR ZMOBILEDATA-COMPID,
          rs FOR ZMOBILEDATA-SUBSCRIBERS,
          rt FOR ZMOBILEDATA-TURNOVER,
          re FOR ZMOBILEDATA-ENTRYDATE.
thanks'

Short dump when trying to download alv into excel

Hi SAPAll.
here i have got one alv report ,when executing this alv report it displays in correct way but the only problem is when i click on the icon(local file) which exists at standard tool bar at the top to dowbload into local excel file it is raising the runtime error as
The current statement requires a character-type data object.
at happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
ror analysis
At the statment
       "STRLEN( obj )..."
, only character-type data objects are supported at the argument
position "obj".
In this particular case, the operand "obj" has the non-charcter-type type
"P".
igger Location of Runtime Error
Program                                 SAPLKKBL
Include                                 LKKBLF99
Row                                     3.948
Module type                             (FORM)
Module Name                             GEN_FIELD_OUT2
Line SourceCde
3923 * Bei NUMC führende '0' und ' ' nicht berücksichtigen
3924   elseif gs_fc-tech_form = 6.
3925     write to gs_out-hlpchar no-zero left-justified.
3926     if gs_fc-just = 'R'.
3927       condense gs_out-hlpchar.
3928     endif.
3929     gs_out-hlplen = strlen( gs_out-hlpchar ).
3930   elseif gs_fc-tech_form = 11.                              "INS TECH11
3931 *   Min. Ausgabelänge für ein Datum ist immer 8
3932     if gs_fc-datatype = 'DATS'.                             "INS TECH11
3933       gs_out-hlplen = 8.                                    "INS TECH11
3934 *    Min. Ausgabelänge für eine Uhrzeit ist immer 6
3935     elseif gs_fc-datatype = 'TIMS'.                         "INS TECH11
3936       gs_out-hlplen = 6.                                    "INS TECH11
3937     endif.                                                  "INS TECH11
3938   elseif gs_fc-tech_form = 1 or gs_fc-tech_form = 90.
3939 *   Überführung int. in ext. Format via Konvertierungsexit
3940     if not gs_fc-convexit is initial or                     "INS TECH11
3941        not gs_fc-inttype ca 'CN'.
3942 *   elseif not gs_fc-convexit is initial.            "DEL TECH11
will be waiting for quick response please respond at your discretion.
regards.
Varma
Edited by: Thomas Zloch on Mar 11, 2010 11:48 AM

hi suhas .
the folliwing below is the code for alv and i had used 2 different structures for populating the data into alv
FORM fieldcat_init USING    p_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   = 'ORDER'.
ls_fieldcat-ref_tabname = 'st_proc_out'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'ORDER NUMBER'.
ls_fieldcat-seltext_m   = 'ORDER NUMBER'.
ls_fieldcat-seltext_l   = 'ORDER NUMBER'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   = 'P_ORDER'.
ls_fieldcat-ref_tabname = 'st_proc_out'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'P.O.NUMBER'.
ls_fieldcat-seltext_m   = 'P.O.NUMBER'.
ls_fieldcat-seltext_l   = 'P.O.NUMBER'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   ='LINE'.
ls_fieldcat-ref_tabname = 'st_proc_out2'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'Line Number'.
ls_fieldcat-seltext_m   = 'Line Number'.
ls_fieldcat-seltext_l   = 'Line Number'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   ='MATNO'.
ls_fieldcat-ref_tabname = 'st_proc_out2'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'Mat.Number'.
ls_fieldcat-seltext_m   = 'Mat.Number'.
ls_fieldcat-seltext_l   = 'Mat.Number'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   ='MATERIAL'.
ls_fieldcat-ref_tabname = 'st_proc_out2'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'Mat Descrption'.
ls_fieldcat-seltext_m   = 'Mat Descrption'.
ls_fieldcat-seltext_l   = 'Mat Descrption'.
APPEND ls_fieldcat TO p_fieldcat .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = 'YSDRO024C1'
      i_grid_title       = 'EXPORT ORDER REPORT'
      is_layout          = alv_layout
      it_fieldcat        = alv_fieldcat
      i_save             = 'A'
    TABLES
      t_outtab           = i_output
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM proc_print.
FORM proc_print .
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos     = '1'.
ls_fieldcat-fieldname   = 'ORDER'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_m   = 'ORDER NUMBER'.
ls_fieldcat-ddictxt     = 'M'.
APPEND ls_fieldcat TO alv_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos     = '2'.
ls_fieldcat-fieldname   = 'P_ORDER'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_m   = 'PO NUMBER'.
ls_fieldcat-ddictxt     = 'M'.
APPEND ls_fieldcat TO alv_fieldcat.
regards,
Varma

Short Dump When Installing Key Figure Catalog from BI Content

Hi Friends,
I get a Short dump when trying to Install a Key Figure Catalog (in Purchasing) from the BI content. This is what the Error Says ,
" You Attempted to Use a "NULL" object reference (Points to nothing) access a component (variable : " "). An Object reference must point to an object (an instance of class ) before it can be used to access components.
Any input will be greatly appreciated,

Hi Michal,
this bug hits only patch level 201 of the DBSL. Please update the DBSl.
Regarding the ABAP code I do not believe that the hint helps in this case but it should not cause any problems either. If this hint is applied more PREPARE calls are neccessary since before every execution a new statement text is assembled.
The advantage of SUBSTITUTE_VALUES hints is that the database optimizer get more information through the statement text. The downside is that a new statement is generated every time. E.g. you won't find the statement as a top scorer in a SQL cache analysis if the access plan is still bad.
Regards
Frank

Short Dump when the Bex-Report scheduled for Broadcast

Hi Guru's
I am getting the short dump when I am scheduling the Bex-Report for Broadcasting. Need your help to reslove this issue.
Thanks
Navin
Note
The following error text was processed in the system BDV : The current application triggered a termination with a short dump.
The error occurred on the application server spdbwd01_BDV_05 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: INTERNAL_ERROR of program SAPLSDCL
Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SDOK_PHIO_GET_CONTENT_ACCESS of program SAPLSDCI
Function: SKWF_PHIO_CONTENT_ACCESS_GET of program SAPLSKWF_CONTENT
Method: COPY_MIME_TO_FOLDER of program CL_RSRA_KWF_UTILITIES=========CP
Method: GET_STYLESHEET of program CL_RSRA_KWF_TMPL==============CP
Method: CONSTRUCTOR of program CL_RSRA_KWF_TMPL==============CP
Method: SET_TEMPLATE_FOLDER of program CL_RSRA_ENGINE_BC=============CP
Method: CONSTRUCTOR of program CL_RSRA_ENGINE_BC=============CP
Method: EXECUTE_SINGLE of program CL_RSRA_JOB===================CP

HI Navin,
Check the short dump analysis in T-code ST22.
and also check the Information Broadcast Settings / Configuration
Check the error for Emails in t-code SCOT. BASIS Consultants will help you on this issue.
Regards
Daya Sagar

Demo Error when creating or changing configuration objects

Hi All,
I am trying to "Generate the Configuration Objects" for Demo: CheckFlightAvailability.
But in the GenerationLog I got the error under "Generation Statistic" saying that "Error when creating or changing configuration objects".
I can any one tell me what went wrong?
Regards,
Nagarjuna.

Did you ever solve this issue? We are experiencing the same errors, but with ZCM 11. Server configurstion is Windows Server 2008R2, database is MS SQL 2005.
Every time we try to create or change a (Windows) bundle or policy there's an error message in ZCC. The error is:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: org.hibernate.exception.ConstraintViolationExcepti on: could not insert collection: [com.novell.zenworks.datamodel.objects.assignableco ntent.AssignableContentObject.ContentServers
...followed by a different GUID(?) every time.
We've placed a SR but haven't had any suggestions from Novell yet - we're soon going from calm to panic as we are planning to move from test to production in two weeks...
Cheers,
Peter

Dump when trying to create FI-SL planning layout

I get a dump when trying to create an FI-SL plannign layout. See details below.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          27.07.2010 13:02:45
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Combination ledger-version not allowed
     Long text of error message:
     Technical information about the message:
     Message class....... "GLPL"
     Number.............. 710
     Variable 1.......... " "
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 SAPLKPP_FISL
     Include                                 LKPP_FISLU08
     Row                                     69
Module type                             (FUNCTION)
Module Name                             G_PP_DIMENSIONS_FILL
ce Code Extract
SourceCde
9 ************************************************************************
0 * T8PL01 : fill dimensions
1 ************************************************************************
2 *
3   REFRESH: itkpp0d.
4   CLEAR : itkpp0d.
5 *
6   SELECT * FROM t8pl01
7            WHERE
8            appl     = appl     AND
9            subclass = subclass AND
0            tabname = tabname.
1     MOVE-CORRESPONDING t8pl01 TO itkpp0d.
2     MOVE t8pl01-hierlevel TO itkpp0d-level.
3     IF NOT t8pl01-fieldname = 'RACCT'.
4       t8pl01-dinit = 'X'.
5     ENDIF.
6     APPEND itkpp0d.
7   ENDSELECT.
8   EXPORT itkpp0d TO MEMORY ID 'ITKPP0D'.
9 *
0 * Check if WER
T-dimension is available in the present set of
1 * dimenions.
2 *
3   READ TABLE itkpp0d WITH KEY dim_werte.           "Kein Binary Search
And so on and so fourth. Please what could the problem be?

Hi,
You type wrong tcode name. The correct name is: GLPLINSTALL
Detail in Sapnote 757269.
Regards,
Thanh.
Edited by: Thanh Tu Van on Nov 8, 2010 5:27 AM

Short dump when assigning revision to notification (iw22)

Hello!
We have a short dump when we try to assign a revision to a notification in iw22.
The dump occurs when we save after assigning a revision. We have the lollowing message:
Message CO888 : Error when reading order header with index
Include LCOBHIC2, line 39
The OSS note 1101437 doesn't solve our problem.
Can you help me?
Thanks by advance,
Laurent.

I tried your tests.
I haven't a dump neither for the first test nor for the second one.
The dump occurs only when:
- I create a notification
- i create an order and assign it to this notification.
- i save the notification and the order
- i assign a revision to the notifiaction and save
There isn't dump if i assign revision number before the order creation. In fact, the dump only occurs if a assign a revision number after the assignment of the order to the notifiation.
I'm checking user exit.
Thanks,
Laurent.

Short Dump when trying to change configuration of BT112H_SC/OVViewSet (Service Contracts)

Similar Messages

Maybe you are looking for