Short dump when trying to see the text elements of main window

Hi ,
The form is running properly in 4.7 c . But when the same is copied in ECC5.0 (unicode) , i 'm getting short dump while trying to see the TEXT ELEMENTS .
The message is like ' trying to create a field with zero length'.
Regards,
Jytoi.

hi
I've never worked on ECC 5.0 version..however, I can only tell u that this could be the issue that code written in 4.7 may not be supported in 5.0..so try to get a good idea of ECC 5.0 before u start coding in this..
regards,
shamim

Similar Messages

Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

Have sound but no picture when i click on the video.Elements 10 on windows 7.Can you help.

Bigal.seamills
What is the driver version for your NVIDIA GeForce GT640?
There is a known issue specific to Premiere Elements 10 and NVIDIA GeForce. The Announcement at the top of this forum tells it all - detailed description of problem, references, fixes, and fix details.
The following is a copy paste of that Announcement....
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card
and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your
first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that
it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and
unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer
has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back
the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver
roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10.
Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found NVIDIA Driver Downloads - Advanced Search
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for
the driver roll back can be found http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Please refer to the following for the driver version history of your NVIDIA card
Based on history, you should be using
GeForce 320.18 Driver
320.18
May 23, 2013
Please review and consider and then let us know the results.
Thank you.
ATR

Facing short dumps when trying to open session in CSA

Hi
All am facing Short dump when i am trying to open session in CSA
Error detials:
go to System Administration workcenter task management up CSA. Choose the Solution
got short dump:
Short text
    Length error occurred in IMPORT statement.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
     not caught in
    procedure "LOAD" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    During import the system discovered that the target object has
    a different length than the object to be imported.
Missing RAISING Clause in Interface
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.431
    Module type                             (METHOD)
    Module Name                             LOAD
Trigger Location of Exception
    Program                                 SAPLDSVAS_PROC
    Include                                 LDSVAS_PROCTAI
    Row                                     1.514
    Module type                             (METHOD)
    Module Name                             LOAD
Please help me to solve this problem
Regards,
Neni

Hello Neni
According to the information I saw in that post it could be caused by a sort of inconsistency of the program code vs a structure.
Wether that is a bug that is in your SAP Solution Manager release or something that is caused by administrative actions (perhaps solving SPAU entries after SP stack update or upgrade) I cannot tell.
I would recommend you either try and find a relative SAP note (narrowing down result to only your SAP Solution Manager system) and searching using the dump keywords. If you cannot find anything I would recommend you to open a customer message so SAP can take a look at the specific error.
If you give more information, perhaps someone on the forum can help you out abit better, which SAP Solution Manager version and so on.
You also didn't answer my question, any recent changes you are aware of ?
Kind regards
Tom

Short Dump when trying to change configuration of BT112H_SC/OVViewSet (Service Contracts)

Hi Experts,
I have a problem with a component usage when trying to change the OverviewSet Configuration for the Service Contract. The whole component BT112H_SC is complete standard and no enhancements have been made yet.
When trying to change the configuration of the view OVViewSet there appears the error message:
'500 SAP Internal Server Error'
Error: Define Component Usage 'CUIR_Container' (termination: Rabax_State)
The place where the code dumps is shown in the attached picture with the name 'ST22'. The error screen when trying to change of the configuration is shown in the attached picture 'Configuration'
It seems like one error is appearing in Line 18 of the class CL_BSP_WD_REPOSITORY and method GET_CMP_USAGE_DEF:
Method: GET_CMP_USAGE_DEF.
method GET_CMP_USAGE_DEF.
   field-symbols: <USAGE> type BSP_WD_CMP_USAGE_DESCR.
   read table ME->USAGES with key USAGE_NAME = IV_USAGE_NAME
                         assigning <USAGE> binary search.
   if SY-SUBRC = 0.
*   Is usage active?
     if CL_WEBCUIF_SWITCH=>IS_ACTIVE( IV_SWITCH_ID = <USAGE>-SFW_DATA-SWITCH_ID
                                      IV_REACTION = <USAGE>-SFW_DATA-REACTION ) ne ABAP_TRUE.
*     usage switched off
       raise exception type CX_BSP_WD_INCORRECT_IMPLEMENT
         exporting
           TEXTID = CX_BSP_WD_INCORRECT_IMPLEMENT=>ACCESS_2_INACTIVE_ELEMENT
           NAME   = IV_USAGE_NAME.
     endif.
     RS_RESULT = <USAGE>.
   else.
   raise exception type CX_BSP_WD_INCORRECT_IMPLEMENT
       exporting
         TEXTID = CX_BSP_WD_INCORRECT_IMPLEMENT=>UNDEFINED_CMP_USAGE
         NAME   = IV_USAGE_NAME.
   endif.
endmethod.                    "GET_CMP_USAGE_DEF
Any Ideas? Do I have to create the component usage manually?

Hi Oliver,
Go to RTR->Viewset->OVViewset-> see whether any view 'CUIR_CONTAINER' is there in that viewset.
If it is there then u need to create component usage of that view. Or else remove that view from viewset.
Regards,
Arun

Short dump when trying to open FPM for Web Dynpro Application

Hi,
I am receiving a short dump while trying to open a Web Dynpro Application in FPM. I go to SE80 and open the Web Dynpro component 'FPM_OIF_COMPONENT'. I then choose the application '/sapsrm/wda_l_fpm_oif'. I then click Web Dynpro Application -> Test -> Execute in Administration Mode. A new IE browser is opened and I then receive a short dump. The name of the short dump runtime error is 'OBJECTS_OBJREF_NOT_ASSIGNED_NO' and the exception is 'CX_SY_REF_IS_INITIAL'.
I have not used FPM before. I would like to use it to remove the 'Close' button from this application. Do I need to initialize FPM before using it?
Please help.
Thanks,
Jeff

>
Chinnu wrote:
> Hello Jeffery Andersen,
>
> If I understand correctly, you are trying to preview FPM_OIF_COMPONENT.
>
> I think this component can not be executed as it just is a template for creating a FPM applications. In other words, it is an interface that can be used to created a WD ABAP application from work bench.
>
> This [Floor Plan Manager - ABAP|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50&overridelayout=true] can help you understand better.
>
> Best regards,
> Chinnu
Hi Chinnu,
Your understanding is not correct, he is trying to execute the application /sapsrm/wda_l_fpm_oif'.
Hallo Jeff,
everyone have suggested lots of possibilities. Nothing works for you. I would suggest the following.
Go and execute any other FPM application which uses FPM_OIF_COMPONENT,does it work ?
If it works then you can narrow down that /sapsrm/wda_l_fpm_oif is not working and you can raise a OSS ticket.
If it is not working then you have to see if you have right BASIS versions to use FPM.
Edited by: Baskaran Senthivel on Dec 6, 2010 1:09 PM

Short Dump when trying to open C-project due to status

Hi,
We have a daily batch job in CRM that reports all the project ID's and
sends e-mails out to recipients.
As part of this report it retrieves the statuses for the project ID's,
however the report short dumps when retrieving the status for one of
the projects because it is not finding an active status.
When we try and open the project in C-projects we get the same short
dump error: CX_DPR_FATAL_ERROR so we cannot view or update the status.
When we investigate this issue we find that in table CRM_JCDS there are
3 entries for this project ID. One of the statuses is inactive (I1703)
but there is another status that is active (I1701). The two status
entries were created at exactly the same date and time and by the same
user.
In table CRM_JEST there is only one entry shown which shows an inactive
status and we believe this to be the wrong status. Please can you
advise if this status conflict is causing the problem and also how to
resolve this issue?

Hi Paul,
generally, the project and its elements must have an active status in table CRM_JEST, however, at this point it is not clear how this inconsistency arised. There is no SAP standard report or a 'generally valid' solution that could solve this issue, however, I found a customer message that you have opened in September with exactly the same problem. A colleague from the development team already provided you with a correction report, but there was no feedback from your side if it helped or not.
It is very difficult to provide help as inconsistencies can have several different causes, so the best would be to have this checked in a customer message with an example.
Regards,
Silvia

Authorisation problem when trying to see the data after loading

HI Everyone,
I loaded data in quality. when i am trying to see the data, i am getting the following messages
1.Your user master record is not sufficiently maintained for object Authorization Object for Plant
2.System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZCOPC_C21 ZCOPC_C21
3.System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZCOPC_C21 64
4.System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZCOPC_C21 64
Can any one of you tell whether it is a transport issue or some authorisation problem. Guide me how to solve this.
Thanks in advance for your help.

Hi,
After you get this error goto Tcode SU53 and then you'll get the object and activity for that auth object.
You can then go and check if this is enabled in your auth profile using SUIM tcode and going to users.
If its enabled then you need to check for values if you have authorization to display data for that particular plant.
This is an auth issue and you should get approval from the appropriate person in order for you to look at the Master data and then have the Security or Basis team grant you access to the same.
Cheers,
Kedar

Can i see the inner nodes in main window(smart forms)

I am creating 2 nodes (let us say text nodes) in main window or secondary window whatever it is.
Now what I want is to see those 2 node on form painter. At present I am unable to see those. Is there any way to see the inner nodes in windows.

Hi,
you cannot see them in form painter, it is not possible .but you can include what ever you want by switch off the form painter and add the nodes.
Regards
vijay

How to display standard text element of main window in next page

hi all
In scripts we have standard script medruck for purchase order.
i want to pull text elements ( terms and payment terms ) in to main window of next page.
i have included main window in page windows of next page ,but im unable to print text elements of terms and payment terms in next page...
any one give your valuable inputs.
Thanks
deepika.

Hi deepika,
First copy standard MEDRUCK to ZMEDRUCK and do the necessary changes.
Then check in driver program when exactly Terma and condition text element is called. Generaly its after printing all items but just check once to confirm.
If TERMS and condition element is called ate end just put a NEW-PAGE command at end of the text element which is called before terms.
Hope this will help You.
Thanks
Dhiraj.

Short Dump when trying to display transformations.

hello Experts,
When I am trying to display the rule details in the transformations i am facing the follwing shortdump messages. I just want to see the rooutine in the rule details of the transformation.Could you please help me to resolve this issue.
"MESSAGE_TYPE_X" " "
"CL_RSTRAN_STEP_ROUT===========CP" or "CL_RSTRAN_STEP_ROUT===========CM008"
"MAINTAIN_ROUT"
Regards,

Step 1: After u see the error message when you open the transformation, try TC su53. This will tell you if you are missing any authorization.
Step2 : If everything is fine! Is your Tran 'deactivated' id 'white' in color ? Activate you source n target again & try to open the TRAN

Short dump when trying to change DTP status to 'green'

Hi,
For a DTP delta run that brings in 0 records, the technical status turn green after 5-6seconds. But the overall status remains in yellow state.
Also if we manually try to set it to 'red', I am able to do so and delete this request and run a new request, but again it ends with overall status yellow.
If I try to set it to 'green' manually following short dump occurs:
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_X
ABAP Program           SAPLRSMDATASTATE
Application Component BW-WHM-DST
I have already scanned all SAP notes relevant for this short dump, but none of them relates to this scenario.
Please let me know if anyone faced this issue anytime, and how was it solved?
Version : BW 7.02 SP14
Regards,
Rathy

Hello Rathy,
You can do following things,
From message, it is apparent that there is Error in one of the ABAP Program . And as the Error is occurring within few seconds of the Start of DTP, can you check and debug the Start Routine .
If Start Routine is not there, try to check whatever ABAP routine are there in facilitating the processing.
( Routine in relevant Application Componenrt - BW-WHM-DST )
Before this, can you also check the ABAP Dump through ST22 and make sure that the underlying datasource ( for DTP ) is OK and smooth.
Try to proceed in that way.. Hope this helps !
Regards
YN

Short dump when trying to download alv( reuse_alv_grid data) into excel

Hi SAPAll.
here i have got one alv report ,when executing this alv report it displays in correct way but the only problem is when i click on the icon(local file) which exists at standard tool bar at the top to dowbload into local excel file it is raising the runtime error as
The current statement requires a character-type data object.
at happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
ror analysis
At the statment
"STRLEN( obj )..."
, only character-type data objects are supported at the argument
position "obj".
In this particular case, the operand "obj" has the non-charcter-type type
"P".
igger Location of Runtime Error
Program SAPLKKBL
Include LKKBLF99
Row 3.948
Module type (FORM)
Module Name GEN_FIELD_OUT2
Line SourceCde
3923 * Bei NUMC führende '0' und ' ' nicht berücksichtigen
3924 elseif gs_fc-tech_form = 6.
3925 write to gs_out-hlpchar no-zero left-justified.
3926 if gs_fc-just = 'R'.
3927 condense gs_out-hlpchar.
3928 endif.
3929 gs_out-hlplen = strlen( gs_out-hlpchar ).
3930 elseif gs_fc-tech_form = 11. "INS TECH11
3931 * Min. Ausgabelänge für ein Datum ist immer 8
3932 if gs_fc-datatype = 'DATS'. "INS TECH11
3933 gs_out-hlplen = 8. "INS TECH11
3934 * Min. Ausgabelänge für eine Uhrzeit ist immer 6
3935 elseif gs_fc-datatype = 'TIMS'. "INS TECH11
3936 gs_out-hlplen = 6. "INS TECH11
3937 endif. "INS TECH11
3938 elseif gs_fc-tech_form = 1 or gs_fc-tech_form = 90.
3939 * Überführung int. in ext. Format via Konvertierungsexit
3940 if not gs_fc-convexit is initial or "INS TECH11
3941 not gs_fc-inttype ca 'CN'.
3942 * elseif not gs_fc-convexit is initial. "DEL TECH11
please respond at ur time

Hi,
Verify your field_cat, because the element (column) with value (type P) may be defined with the parameter inttype = 'C' or inttype = 'N'.
You have to change to inttype = 'P' .
Best regards,
Leandro Mengue

Short dump when trying to download alv into excel

Hi SAPAll.
here i have got one alv report ,when executing this alv report it displays in correct way but the only problem is when i click on the icon(local file) which exists at standard tool bar at the top to dowbload into local excel file it is raising the runtime error as
The current statement requires a character-type data object.
at happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
ror analysis
At the statment
       "STRLEN( obj )..."
, only character-type data objects are supported at the argument
position "obj".
In this particular case, the operand "obj" has the non-charcter-type type
"P".
igger Location of Runtime Error
Program                                 SAPLKKBL
Include                                 LKKBLF99
Row                                     3.948
Module type                             (FORM)
Module Name                             GEN_FIELD_OUT2
Line SourceCde
3923 * Bei NUMC führende '0' und ' ' nicht berücksichtigen
3924   elseif gs_fc-tech_form = 6.
3925     write to gs_out-hlpchar no-zero left-justified.
3926     if gs_fc-just = 'R'.
3927       condense gs_out-hlpchar.
3928     endif.
3929     gs_out-hlplen = strlen( gs_out-hlpchar ).
3930   elseif gs_fc-tech_form = 11.                              "INS TECH11
3931 *   Min. Ausgabelänge für ein Datum ist immer 8
3932     if gs_fc-datatype = 'DATS'.                             "INS TECH11
3933       gs_out-hlplen = 8.                                    "INS TECH11
3934 *    Min. Ausgabelänge für eine Uhrzeit ist immer 6
3935     elseif gs_fc-datatype = 'TIMS'.                         "INS TECH11
3936       gs_out-hlplen = 6.                                    "INS TECH11
3937     endif.                                                  "INS TECH11
3938   elseif gs_fc-tech_form = 1 or gs_fc-tech_form = 90.
3939 *   Überführung int. in ext. Format via Konvertierungsexit
3940     if not gs_fc-convexit is initial or                     "INS TECH11
3941        not gs_fc-inttype ca 'CN'.
3942 *   elseif not gs_fc-convexit is initial.            "DEL TECH11
will be waiting for quick response please respond at your discretion.
regards.
Varma
Edited by: Thomas Zloch on Mar 11, 2010 11:48 AM

hi suhas .
the folliwing below is the code for alv and i had used 2 different structures for populating the data into alv
FORM fieldcat_init USING    p_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   = 'ORDER'.
ls_fieldcat-ref_tabname = 'st_proc_out'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'ORDER NUMBER'.
ls_fieldcat-seltext_m   = 'ORDER NUMBER'.
ls_fieldcat-seltext_l   = 'ORDER NUMBER'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   = 'P_ORDER'.
ls_fieldcat-ref_tabname = 'st_proc_out'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'P.O.NUMBER'.
ls_fieldcat-seltext_m   = 'P.O.NUMBER'.
ls_fieldcat-seltext_l   = 'P.O.NUMBER'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   ='LINE'.
ls_fieldcat-ref_tabname = 'st_proc_out2'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'Line Number'.
ls_fieldcat-seltext_m   = 'Line Number'.
ls_fieldcat-seltext_l   = 'Line Number'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   ='MATNO'.
ls_fieldcat-ref_tabname = 'st_proc_out2'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'Mat.Number'.
ls_fieldcat-seltext_m   = 'Mat.Number'.
ls_fieldcat-seltext_l   = 'Mat.Number'.
APPEND ls_fieldcat TO p_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname   ='MATERIAL'.
ls_fieldcat-ref_tabname = 'st_proc_out2'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_s   = 'Mat Descrption'.
ls_fieldcat-seltext_m   = 'Mat Descrption'.
ls_fieldcat-seltext_l   = 'Mat Descrption'.
APPEND ls_fieldcat TO p_fieldcat .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = 'YSDRO024C1'
      i_grid_title       = 'EXPORT ORDER REPORT'
      is_layout          = alv_layout
      it_fieldcat        = alv_fieldcat
      i_save             = 'A'
    TABLES
      t_outtab           = i_output
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM proc_print.
FORM proc_print .
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos     = '1'.
ls_fieldcat-fieldname   = 'ORDER'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_m   = 'ORDER NUMBER'.
ls_fieldcat-ddictxt     = 'M'.
APPEND ls_fieldcat TO alv_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos     = '2'.
ls_fieldcat-fieldname   = 'P_ORDER'.
ls_fieldcat-key         = 'X'.
ls_fieldcat-seltext_m   = 'PO NUMBER'.
ls_fieldcat-ddictxt     = 'M'.
APPEND ls_fieldcat TO alv_fieldcat.
regards,
Varma

Issue with printing of multiple text elements in main window

Hi experts,
I have developed a sales order form in SAP script.
I hv got two text elements in the main window. n i m calling these two text elements by using two write form functions in d print program.
The first text element is gettin called n d relevant fields in dat particular text element is being displyed. (Window - Main)
My problem is dat the second text element for the same main window is not gettin called n its relevant fields r not gettin displayed.
Plz help me to solve the querry.
Its urgent.
Thanks n Regards,
Purva

Hi,
Are you testing that from in same client where you developed, else make sure that after each change you need to transport the form to testing client.
second thing is check with code did you mention the same text element in window editor and in the program.
Reward if useful,
Thanks,
Sreeram.

Text-element in main window

Hello together,
is it sorrect, that text-elements can only be used in the main window?
Is there any chance to use text-elemnts in a new-created window?
an example that does not work:
new window: TABLE
call in print-program:
CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element = 'ITEM_GR'
          window = 'TABLE'.
Unfortunately i need a new window with a possibility to print several text-elements.
Thanks a lot for help.

Hi Marcel,
In one of my developments, i've created text elements in the windows other than MAIN window. But it worked properly. I think there might be some other reasons for ur failure. Try to trace that.
Or else u just try by changing the Window type as CONST.
Try this out & let me know in case of any other concrens..
Reward if useful.
Pavan.

Short dump when trying to see the text elements of main window

Similar Messages

Maybe you are looking for