Short dump while activating process chain

Please let me know the cause of short dump while activating process chain.. when trying to activate local process chains in metachain it is causing dump

Can you share more details about error.
Have you done any changes to local chain? or is this is new chain?
Try to remove meta chain from schedule, later activate your local chain and meta chain.
schedule your meta chain.

Similar Messages

Short Dump while activating Transformation through Program

HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
Prasad

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

Error while activating Process Chains

Hi all,
while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
when i double click on the error msg, i got the following help msg: "
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.
Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
Points will be given
Thanks
Ganesh

Hi,
Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
OSS : 511475
Symptom
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
Other terms
RSPC065
Reason and Prerequisites
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
Solution
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions.
Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
BW 2.0B
 Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
BW 2.1C
 Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
BW 3.0A
 Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.

DBIF_REPO_SQL_ERROR short dumps while activating data in ODS

Hi All,
We are using BW3.5 with Oracle 9.2 on AIX 5.3 box, from the past few days we are getting DBIF_REPO_SQL_ERROR short dumps frequently while activating data in ODS.
Runtime Error          DBIF_REPO_SQL_ERROR
Date and Time          08.01.2008 13:01:08
     1. A printout of the problem description (short dump)
        To obtain this, select in the current display "System->List->
        Save->Local File (unconverted)".
     2. A suitable printout of the system log
        To obtain this, call the system log through transaction SM21.
        Limit the time interval to 10 minutes before and 5 minutes
        after the short dump. In the display, then select the function
        "System->List->Save->Local File (unconverted)".
     3. If the programs are your own programs or modified SAP programs,
        supply the source code.
        To do this, select the Editor function "Further Utilities->
        Upload/Download->Download".
     4. Details regarding the conditions under which the error occurred
        or which actions and input led to the error.
     Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP
     Please check the entries in the system log (Transaction SM21).
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     use the following search criteria:
     "DBIF_REPO_SQL_ERROR" C
     "SAPLRSSM_PROCESS" or "LRSSM_PROCESSF04"
     "CHECK_IF_ANALYZE_IS_NESSESSARY"
System environment
    SAP Release.............. "640"
    Application server....... "psapdb"
    Network address.......... "158.58.65.11"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "00CD615C4C00"
    Character length......... 16 Bits
    Pointer length........... 64 Bits
    Work process number...... 22
    Short dump setting....... "full"
    Database server.......... "psapdb"
    Database type............ "ORACLE"
    Database name............ "BWP"
    Database owner........... "SAPBWP"
    Character set............ "C"
    SAP kernel............... "640"
    Created on............... "Oct 29 2006 20:49:57"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
    Patch level.............. "155"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
     10.2.0.."
    SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 24576
MM Used.................. 6604384
MM Free.................. 1772536
SAP Release.............. "640"
User and Transaction
    Client.............. 200
    User................ "R3REMOTE"
    Language key........ "E"
    Transaction......... " "
    Program............. "SAPLRSSM_PROCESS"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
     "CHECK_IF_ANALYZE_IS_NESSESSARY".
    The main program was "RSPROCESS ".
    The termination occurred in line 1143 of the source code of the (Include)
     program "LRSSM_PROCESSF04"
    of the source code of program "LRSSM_PROCESSF04" (when calling the editor
     11430).
    The program "SAPLRSSM_PROCESS" was started as a background job.
    Job name........ "BI_PROCESS_ODSACTIVAT"
    Job initiator... "RPRIYANKA"
    Job number...... 02010102
Also we have a failed job here. Here is the job log.
Job log overview for job:    BI_PROCESS_ODSACTIVAT / 02010102
Date       Time     Message text
08.01.2008 13:01:00 Job started
08.01.2008 13:01:00 Step 001 started (program RSPROCESS, variant &0000000000188, user ID R3REMOTE)
08.01.2008 13:01:02 Activation is running: Data target HBCS_O25, from 1,758 to 1,767
08.01.2008 13:01:02 Data to be activated successfully checked against archiving objects
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 ANALYZE TABLE "/BIC/AHBCS_O2540" DELETE
08.01.2008 13:01:02 STATISTICS
08.01.2008 13:01:02 SQL-END: 01/08/2008 13:01:02 00:00:00
08.01.2008 13:01:02 SQL: 01/08/2008 13:01:02 R3REMOTE
08.01.2008 13:01:02 BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
08.01.2008 13:01:02 'SAPBWP', TABNAME => '"/BIC/AHBCS_O2540"',
08.01.2008 13:01:02 ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
08.01.2008 13:01:02 INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
08.01.2008 13:01:02 GRANULARITY => 'ALL', CASCADE => TRUE ); END;
08.01.2008 13:01:05 SQL-END: 01/08/2008 13:01:05 00:00:03
08.01.2008 13:01:05     SQL-ERROR: 603 ORA-00603: ORACLE server session terminated by fat al error
08.01.2008 13:01:05 System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE
08.01.2008 13:01:08 ABAP/4 processor: DBIF_REPO_SQL_ERROR
08.01.2008 13:01:08 Job cancelled
Listener is working fine, Checked the RFC connections, Tried restarting the system, tried adding space to the TEMP tablespace as well as PSAPBWP, but they didn't work.
Please help.

The problem got solved as there were DB errors like ORA-01114: IO error writing block to file 256 (block # 126218).
Here the point to be notes is file 256. The number greater than 255 indicates a temp datafile. This indicates an issue with PSAPTEMP tablespace. When checked on PSAPTEMP tablespace, one of the filesystems where one temp data file sitting was full. The filesystem was 100% full. This will prevent the temp datafile to grow and shrink as and when required.
So, adding more space to the filesystem solved the problem.
Thanks to everyone who have shown interest in solving my problem.

Short Dump while Activating a Heirarchy

Hi Experts,
I have a hierarchy which is in M version, I am trying to copy hierarchy from Quality to Dev system.
The hierarchy in DEV system is in M version. When I try to activate the Hierarchy I am getting a short dump which I am not able to understand.
I have tried also with the ABAP programe to activate it but still I am getting this.
Sorry to paste all the dump but can any one advise what could be reasons behind heirarchy not getting activated.
Thanks,
Tati.
Please find the Dump message.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
 terminated because it has
 come across a statement that unfortunately cannot be executed.
What can you do?
 Note down which actions and inputs caused the error.
 To process the problem further, contact you SAP system
 administrator.
 Using Transaction ST22 for ABAP Dump Analysis, you can look
 at and manage termination messages, and you can also
 keep them for a long time.
Error analysis
 Only message types A, E, I, W, S, and X are allowed.
Information on where terminated
 Termination occurred in the ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" -
 in "CALL_MESSAGE".
 The main program was "RSSH_HIERM_START_NEU ".
 In the source code you have the termination point in line 11
 of the (Include) program "CL_RSSH_MESSAGE_HANDLER=======CM003".
Source Code Extract
Line SourceCde
 1 METHOD call_message .
 2
 3 FIELD-SYMBOLS: <l_s_msg> TYPE gt_s_msg.
 4
 5 READ TABLE p_t_msg INDEX 1 ASSIGNING <l_s_msg>.
 6 IF sy-subrc <> 0.
 7 MESSAGE x000.
 8 ENDIF.
 9
 10 <l_s_msg>-handled = rs_c_true.
>>>>> MESSAGE ID <l_s_msg>-msgid TYPE <l_s_msg>-msgty NUMBER <l_s_msg>-msgno
 12 WITH <l_s_msg>-msgv1 <l_s_msg>-msgv2 <l_s_msg>-msgv3 <l_s_msg>-msgv4.
 13
 14
 15 ENDMETHOD. "CALL_MESSAGE

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

OBJECTS_OBJREF_NOT_ASSIGNED Dump while Installing Process Chain

Hi Gurus,
I got OBJECTS_OBJREF_NOT_ASSIGNED dump while installing Business Content process chian "0TCT_C2_INIT_P01".
Also 6 info packages were not delivered in business content for the above chian.
Any Help.
Regards,
Anil

Check if this note helps..though it is for infoobjects
<a href="https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1019055&_NLANG=E">Note 1019055 - Runtimer errors when activating InfoObjects</a>
Message was edited by:
Manga Paidikondala

Reg : Short Dump While Activating Workflow

Hi All,
This morning I added a condition step in my workflow and created two custom methods in the corresponding BO and used them in the task. Initially when i made the changes in the workflow and tested it, it was working fine. But after sometime, when I did the necessary binding and tried to activate the workflow, the workflow started resulting in short dump.
Below is the dump analysis.
SAPSQL_ARRAY_INSERT_DUPREC
The ABAP/4 Open SQL array insert results in duplicate database records.
000310        L_OTYPE EQ ORG_OBJTYPE_WORKFLOW.
000320       LOOP AT ACT_LINES.
000330         MOVE-CORRESPONDING ACT_WFDKEY TO ACT_LINES.
000340         MOVE ACT_CLIENT TO ACT_LINES-CLIENT.
000350         MODIFY ACT_LINES.
000360       ENDLOOP.
000370     ELSE.
000380       MESSAGE E280 WITH L_OTYPE RAISING INVALID_OBJECT_TYPE.
000390     ENDIF.
000400
000410   *- insert lines table
------>     INSERT SWD_LINES CLIENT SPECIFIED FROM TABLE ACT_LINES.
000430     IF SY-SUBRC NE 0.
000440       MESSAGE E281 WITH SY-SUBRC 'SWD_LINES'
000450                    RAISING INTERNAL_DATABASE_ERROR.
000460     ENDIF.
000470
000480   *- commit
000490     IF DO_COMMIT NE ' '.
000500       COMMIT WORK.
000510     ENDIF.
000520
000530   ENDFUNCTION.
I tried searching sdn. But all other posts were related to passing entries from internal table to DB. Also I'm not even sure if i can raise a OSS, because a few minutes back the system was working fine and all of sudden this started happening.
So can you please guide me what I am missing and how can i fix this?
Thanks & Regards,
Raj

Hi Rick,
When I get acitvate the workflow, the workflow template is gettign active & saved and after that the system results into short dump. And also when i try creating a PR and test this workflow, in SWEL, i can see the below message in RFC status field.
The ABAP/4 Open SQL array insert results in duplicate database records..
I haven't done any duplicate binding. Also I checked what you suggested. Didn't work. Also checked my newly added code. But I'm not accessing database directly anywhere. All is done via SAP standard function module.
Even if i try to display this workflow in PFTC, the system is resulting in the same short dump.
What could be the reason?
Regards,
Raj
Edited by: Raj Karunanidhi on Feb 23, 2010 5:30 AM

Error while activating process chains from Business Content

Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
Vineeth

Hi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM

UNCAUGHT_EXCEPTION with msg CX_RSR_X_MESSAG while scheduling Process chain

Hi Gurus,
We are facing a short dump while scheduling process chains, as follows:
 
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
 
Error analysis
 An exception occurred which is explained in detail below.
 The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
 and
 therefore caused a runtime error.
 The reason for the exception is:
 No text available for this exception
 
Information on where terminated
 Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
 The main program was "RSPC_MAINTAIN_SINGLE ".
 In the source code you have the termination point in line 82
 of the (Include) program "LRRMSU13".
 
We tried to schedule it as a remote process chain from some other system it cancelled the job there with an ERROR_MESSAGE. We checked the RFC Connections at the source system side but it is working properly. We then tried to schedule the chain manually, we had this exception. Then we tried to have a look at previous logs of the process chain. It had this exception. We tried to reactivate the chain it was successful but when tried to schedule the chain same issue again. We tried to run the Meta chains under the same chain separately. They too gave us the same exception.
Please help.
Regards,
Sourabh Deo

S Simran wrote:
Hi,
>
> Ours is a fresh installation..
>
> When i am loading for the first time till PSA it is successful..
>
> As HR data sources are 3.5 datasources, i am loading cube via infopackage..
>
> When i start the load to cube it is giving me dump with exception CX_RSR_X_MESSAG.
>
> i checked note 615389 which talks about "buffering of number range object BIM9999998". the 0REQID is not buffered, but it does not throw any error msg in RSRV to correct the error..
>
> and one more note 1157796 which talks about patches with version BI 7.0.
>
> Now we are in BI 730 with heighest level 0005.
>
> Not sure how to solve this error
>
> Any ideas?
What's your SP? Are you having any master data updates left unattended? Check the Master data objects, check the flows. Related SAP Notes : 914304 / Check 967202(SP10) and 998673(SP11), 1157796, 763203 and 615389
Edited by: Arun Bala G on Feb 12, 2012 9:50 PM

Errror when activating process chain

Hi All,
Geeting the error while activing process chains in Quality.
Error is *'Node Characteristic 0classnum is not entered as hierarchy characteristic for 0material*
can any one help on this.
Thanks in Advance.
Srinivas

Hi
This is not advisable to activate a process chain in quality directly. You should do it in development and then transport it across.
This error is realated to hierarchy. Do you have a hierarchy load attached to this chain?
Check the hierarcy first. Then activate the chain.
Cheers
Chanda

Short Dump while executing New Hire (action type) in PA40

Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time          21.08.2014 14:07:03
Short text
    Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
    include "/1PAPAXX/HDR_21000AO01 " in
    line 52:
    ""LV_LENGTH" has already been declared"
    The include has been created and last changed by:
    Created by: "HCM04 "
    Last changed by: "HCM03 "
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program /1PAPAXX/HDR_21000A :
    ""LV_LENGTH" has already been declared"
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP Release..... 731
    SAP Basis Level. 0007
    Application server... "dc-ds-erp"
    Network address...... "172.16.23.111"
    Operating system..... "Linux"
    Release.............. "3.0.13-0.27-default"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "dc-ds-erp"
    Database type..... "ORACLE"
    Database name..... "ECD"
    Database user ID.. "SAPSR3"
    Terminal.......... "NLC-HP"
    Char.set.... "C"
    SAP kernel....... 720
    created (date)... "Sep 14 2013 06:16:24"
    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
    Database version. "OCI_112, 11.2.0.3.0, V1, default"
    Patch level. 500
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 720
    Operating system..... "Linux 2.6, Linux 3"
    Memory consumption
    Roll.... 0
    EM...... 37708200
    Heap.... 0
    Page.... 106496
    MM Used. 4666776
    MM Free. 3709976
User and Transaction
    Client.............. 210
    User................ "HCM03"
    Language key........ "E"
    Transaction......... "PA40 "
    Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
    EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
    EPP Connection ID....... 00000000000000000000000000000000
    EPP Caller Counter...... 0
    Program............. "SAPFP50M"
    Screen.............. "MP000000 1000"
    Screen Line......... 3
    Debugger Active..... "none"
Information on where terminated
    Termination occurred in the ABAP program "SAPFP50M" - in
    "GET_HEADER_WITH_TCLAS".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 146
    of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
      EXPORTING
118
           DHDID                    = FHD_HID
119
           BEGDA                    = BEGDA
120
           TCLAS                    = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
*           MOLGA                   =
125
           P0001                    = P0001
126
           PERNR                    = PSPAR-PERNR
127
      IMPORTING
128
           PROG                     = HEADER_PROG
129
           DNUM                     = HEADER_DYNNR
130
       EXCEPTIONS
131
            HEADER_DEACTIVATED          = 1
132
            HEADER_UNKNOWN              = 2
133
            HEADER_GENERATE_DEACTIVATED = 3
134
            HEADER_GENERATE_FAILED      = 4
135
            INTERNAL_ERROR              = 5
136
            OTHERS                      = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
    HEADER_PROG = 'SAPMP50A'.
141
    HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL.                                   "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
    PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
    PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL.                           "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.

Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once!

Short dump while executing info package in 3.5 data flow?

Hi,
i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
Please find attached short dump.
Thanks

Hi,
When you load transaction data I think there is a deadlock.
Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
The program SAPLSENA is the lock handler tool.
Also check if ACR is running on this target while your load is happening.
Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
Try reloading after deleting the locks manually.
Regards.

Short Dump while execuition of DTP.

Hi,
I got short dump while execuiting the DTP.
Error messages shows as below:
1.The database returned a value containing an error
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.Exception CX_SY_NO_HANDLER logged
Could you please help us in solving this issue.
Regards,
Suman.

hi,
an error like this comes usually in 2 cases
1) not enough resources are available to carry out loads.in this case increase no of parallel processes to 2-3 in dtp setting,check the option get delta request by request(if its a delta load) and decrease packet size to 10000(from default 50000)
2)fileld to field assignment is not proper:
u need to check if there is any source field with lenth lets say 5 ans is getting assisgned to a target field length lets say 4.in this case dumps will come
please check the error message in st22 and here you can also check the termination point.please check in option Chosen variables /contents of system fileds where you can get temp values at point of termination.here you can pinpoint values at which prog is throwing dumps.

Short dump while navigate to second view :: "OBJECTS_OBJREF_NOT_ASSIGNED_NO

Hi,
Can anybody help me out as I am getting a short dump while navigating to particular screen.
The error was triggered when i was binding an internal table to node in my second view.
The short dump shows as below.
■The following error text was processed in the system EID : Zugriff über 'NULL' Objektreferenz nicht möglich.
■The error occurred on the application server ECCIDES_EID_00 and in the work process 1 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: HANDLEFROM_EXPORTS_INIT of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
Method: HANDLEFROM_EXPORTS_INIT of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system EID in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ECCIDES_EID_00 in transaction SM21.
■If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server ECCIDES_EID_00 . In some situations, you may also need to analyze the trace files of other work processes.
■If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 700 -u: OBIZDEV -l: E -s: EID -i: ECCIDES_EID_00 -w: 1 -d: 20110723 -t: 161516 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED_NO
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please help.

Hu Saravanan,
Please find my code below in HANDLEFROM_EXPORTS_INIT and
method HANDLEFROM_EXPORTS_INIT .
data : WRK_DOC_CLAS type /OBIZ/ZXP_DOCCLS-DOC_CLAS.
data : it_doc type TABLE OF /OBIZ/ZXP_SHPHD.
DATA : doc_node type REF TO if_wd_context_node.
BREAK-POINT.
if doc_desc = 'Quotation'.
WRK_DOC_CLAS = '0001'.
elseif doc_desc = 'Sales Order'.
WRK_DOC_CLAS = '0002'.
elseif doc_desc = 'Delivery'.
WRK_DOC_CLAS = '0003'.
elseif doc_desc = 'Proforma Invoice'.
WRK_DOC_CLAS = '0004'.
elseif doc_desc = 'Billing'.
WRK_DOC_CLAS = '0006'.
ENDIF.
select * INTO CORRESPONDING FIELDS OF TABLE
it_doc FROM /OBIZ/ZXP_SHPHD WHERE doc_clas = WRK_DOC_CLAS.
call METHOD doc_node->bind_table
EXPORTING new_items = it_doc.
endmethod.
I have imported doc_desc via my inbound plug in the view.
Regards
Deric

Short dump while running Payroll

Dear Experts,
I am getting short dump while running the payroll for around 150 employees, but am not able to see the short dump also as it says that "process terminated".
please help me in this regard and also let me know if there could be any configuration errors.
Regards
Shansar

Thank you all for the response.
The issue has been resolved. i have learnt that log field should not be flagged when you are executing payroll for more than 50 employees.
Regards
Shansar

Short dump while activating process chain

Similar Messages

Maybe you are looking for