Short Dump while copying Org structure from ERP to CRM
Hello Experts:
We are trying to copy the Org structure from ECC to CRM.
We have a standard transaction 'CRMC_R3_ORG_GENERATE' to copy the the org structure from ECC or the IMG path:
SPRO->CRM->Master Data->Organization Management->Data Transfer->Coppy ECC Sales Structure
We have a multiple assignment scenario where each sales groups are assigned to multiple sales offices and likewise,each sales office is assigned to multiple sales org unit in ECC.
This can be achieved by turning on the enhanced version.
In our current business,even though the sales offices and groups are created,but are not having relavance in the business,hence while running in the sandbox system, we ran the program to copy the structures in the standard mode(default) and we could copy it without issues and create the org units for every entity in CRM based on how the number ranges are defined.
What happens when enhanced version switch is turned on ::
While we turn the mode to enhanced version, The system automatically::
- enhances the Function tab page in the ppoma_crm transaction to include a grid table, in which you maintain multiple assignments of organizational units
- generates an extra dialog box to the Organization tab page in business transactions for you to select the relevant assignment path for the organizational unit
- adapts the consistency check in business transactions to take into account organizational units that have been multiple assigned
Risk factor :
Once you have switched to the enhanced backend integration version of the organizational model you cannot return to the standard backend integration version. The system will also automatically make changes to the organizational model version in CRM Mobile Sales.
Also this structure will happen across all the clients in the system,so unfortunately cannot try in a sandbox client also of the new environment.
We are building our development box,so while running the above step in standard mode,the program gives a short dump due to long execution time even though we have the same amount of data as in our prototype system.
Also, we increased the idle time value to a very high value.
When I approached SAP OSS,I was told that it is due to the multiple assignment scenario,hence we need to switch to enhanced version in CRM before we run the copy program ( CRMC_ORG_R3_GENERATE )
I am not quite sure if the mismatch of the scenarios between CRM and ECC could be causing this short dump as we could run it in standard mode in our prototype/sandbox environment without issues even with the same data volume as in the new development system .
I am looking for help from all the experts if they have come across similar issue and your recommendations/feedback if this can be corrected.
Appreciate your guidance/recommendation on this issue.
thanks!!
In CRM Best Practices Building block C05 is the step by step description how to replicate Org. structure and some of employee's master data.
Follow link - http://help.sap.com/bp_crmv12007/CRM_DE/BBLibrary/html/C05_EN_DE.htm
Similar Messages
-
Transporting Org structure from MSD to CRM
Hi All,
I need to import the org structure from CRM (For Territory Management) into MSD(Media Sales & Distribution) system through the CRM Middleware.Can anyone please tell me if there is any standard object available to do so?
Thanks,
Disha.Hello Disha ,
You can try this out in cross functional application of CRM
Wanna know for Which client the reqirement is , and for which org you are working ? -
Getting short dumps while reading bulky data from excel sheet
Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone). -
Regarding Short Dump While loading data from DB Connect
Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am gettinghi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..) -
Short dump while export grid alv with subtotals.
hello,
its strange and i face first time that my grid alv report goin to short dump while i done subtotals and send it to local file thru export.
if am not doing subtotals then export it to local file it goin fine.
whats it has problem plz give ur helping hends.
here i copied a dump msg also.
Short text
Error at assignment: Overwritten protected field.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
A new value is to be assigned to the field "<L_UNIT>", although this field is
entirely or partly protected against changes.
The following are protected against changes:
- Character literals or numeric literals
- Constants (CONSTANTS)
- Parameters of the category IMPORTING REFERENCE for functions and
methods
- Untyped field symbols not yet assigned a field using ASSIGN
- TABLES parameters if the actual parameter is protected against changes
- USING reference parameters and CHANGING parameters for FORMs, if the
actual parameter is protected against changes and
- Accesses using field symbols if the field assigned using ASSIGN is
protected (or partially protected, e.g. key components of an internal
table with the type SORTED or HASHED TABLE) against changes
- Accesses using references, if the field bound to the reference is
protected (or partially protected) against changes
- External write accesses to READ-ONLY attributes,
- Content of a shared object area instance accessed using a shared lock
(ATTACH_FOR_READ).
regards amit.& Object Id : &
& Object Name : &
& Function Module Name : Sales Register &
& Transaction Code : &
& Author : Amit gujargoud &
& Module Name : SD &
& Sub-Module : &
& Program Type : Dialog Create Date : 02/02/2007 &
& SAP Release : ECC 6.0 &
& Description : Sales Register - Detail &
*& Report ZSALESREGISTER
REPORT zsd_salesregister.
*& TYPE-POOLS
TYPE-POOLS : slis.
*& TABLES
TABLES: vbrp, "Billing Document: Item Data
vbrk, "Billing Document: Header Data
lips, "SD document: Delivery: Item data
lfa1, "Vendor Master (General Section)
kna1, "General Data in Customer Master
vbak, "Sales Document: Header Data
vbpa, "Sales Document: Partner (Gopal)
likp, "SD Document: Delivery Header Data
vbap, "Sales Document: Item Data
vbkd, "Sales Document: Business Data
mara. "General Material Data
*& DATA DECLARATION
DATA: BEGIN OF i_report OCCURS 100,
vbeln LIKE vbrp-vbeln, "Billing Document
posnr LIKE vbrp-posnr,
matnr LIKE mara-matnr ,
aubel LIKE vbrp-aubel, "Sales Document
fkimg LIKE vbrp-fkimg, "Actual billed quantity
vrkme LIKE vbrp-vrkme, "Sales unit
arktx LIKE vbrp-arktx, "Short text for sales order item
vgbel LIKE vbrp-vgbel, "Doc number of the reference document
werks LIKE vbap-werks,
vkgrp LIKE vbrp-vkgrp,
fklmg LIKE vbrp-fklmg,
volum LIKE vbrp-volum,
vkbur LIKE vbrp-vkbur,
vtweg_auft LIKE vbrp-vtweg_auft,
auart LIKE vbak-auart,
tabix LIKE sy-tabix, "Internal Table, Current Row Index
name1 LIKE kna1-name1, "Name1
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
orqty TYPE p DECIMALS 0,
penqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
openqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
ean11 LIKE lips-ean11, "International Article No(EAN/UPC)
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
traid LIKE likp-traid,
ort01 LIKE lfa1-ort01, "City
lifnr LIKE lfa1-lifnr, "A/c Number of Vendor or Creditor
netwr LIKE vbrp-netwr, "Net val of bill item in doc currency
kunnr LIKE vbak-kunnr, "Sold-to party
adrnr LIKE vbpa-adrnr, "Address
city1 LIKE adrc-city1, "City
tprtr LIKE lfa1-name1, "Name 1
knumv LIKE konv-knumv, "Number of the document condition
kposn LIKE konv-kposn,
rate LIKE konv-kbetr, "Rate (cond amount or percentage)
bas_val LIKE konv-kwert, "Rate (cond amount or percentage)
exc_duty LIKE konv-kwert, "Rate (cond amount or percentage)
ed_cess LIKE konv-kwert, "Rate (cond amount or percentage)
freight LIKE konv-kwert, "Rate (cond amount or percentage)
pack LIKE konv-kwert, "Rate (cond amount or percentage)
cst LIKE konv-kwert, "Rate (cond amount or percentage)
vat LIKE konv-kwert, "Rate (cond amount or percentage)
ent_tax LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv_round LIKE konv-kwert, "Rate (cond amount or percentage)
disc_tot LIKE konv-kwert, "Discount total - Z001 to Z020
vat_rate LIKE konv-kbetr,
cst_rate LIKE konv-kbetr,
lst_rate LIKE konv-kbetr,
mwsbk LIKE vbrk-mwsbk,
bas_tax LIKE konv-kwert,
dev_tax LIKE konv-kwert,
tcs_tax LIKE konv-kwert,
bas_tot LIKE konv-kwert,
lst LIKE konv-kwert,
vkorg LIKE vbak-vkorg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
text1 LIKE tvm1t-bezei,
text2 LIKE tvm1t-bezei,
text3 LIKE tvm1t-bezei,
text4 LIKE tvm1t-bezei,
text5 LIKE tvm1t-bezei,
bismit_area TYPE p DECIMALS 4, " Size (L*B) in mm
face_area TYPE p DECIMALS 2, " Face Area Declaration
notional_area TYPE p DECIMALS 2,
stock_pcs TYPE p , " decimals 3 Pcs of Stock
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
bismt LIKE mara-bismt, " Size (L*B) in mm
normt LIKE mara-normt, " Industry Standard Description
temp TYPE p DECIMALS 2,
temp1 TYPE p DECIMALS 2,
temp2 TYPE p DECIMALS 2,
temp3 TYPE p DECIMALS 2,
temp4 TYPE p DECIMALS 2,
temp5 TYPE p DECIMALS 2,
temp6 TYPE p DECIMALS 2,
temp7 TYPE p DECIMALS 2,
temp8 TYPE p DECIMALS 2,
temp9 TYPE p DECIMALS 2,
temp10 TYPE p DECIMALS 2,
temp11 TYPE p DECIMALS 2,
temp12 TYPE p DECIMALS 2,
temp13 TYPE p DECIMALS 0,
temp14 TYPE p DECIMALS 0,
temp15 TYPE p DECIMALS 0,
temp16 TYPE p DECIMALS 2,
temp17 TYPE p DECIMALS 2,
temp18 TYPE p DECIMALS 2,
temp19 TYPE p DECIMALS 2,
temp20 TYPE p DECIMALS 2,
temp21 TYPE p DECIMALS 2,
waybill(20) TYPE c,
audat LIKE vbak-audat, "Document Date (Date Received/Sent)
lgort LIKE vbap-lgort, "Storage location
lgobe LIKE t001l-lgobe, "Description of storage location
erdat LIKE vbrk-erdat, "Date on which the record was created
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
acdt LIKE likp-wadat_ist, "Actual goods movement date
fkdat LIKE vbrk-fkdat,
ship LIKE kna1-name1, "Name1 (Ship-to party)
fksto LIKE vbrk-fksto,
fkart LIKE vbrk-fkart,
bezei LIKE t005u-bezei,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
ferth LIKE mara-ferth,
lbtxt LIKE t024x-lbtxt,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
desc LIKE tvkbt-bezei,
brsch LIKE kna1-brsch,
zeinr LIKE mara-zeinr,
bzirk LIKE vbrk-bzirk,
area_desc LIKE tnlst-bezei,
dist_desc TYPE tkukt-vtext,
taluka_desc TYPE t016t-brtxt,
sales_desc TYPE tvgrt-bezei,
kmein LIKE konv-kmein, "Sales Unit
challan LIKE likp-vbeln,
END OF i_report.
data for MVKE
DATA: BEGIN OF i_report_mvke OCCURS 0,
vbeln LIKE vbrp-vbeln, "Billing Document
aubel LIKE vbrp-aubel, "Sales Document
vkorg LIKE vbak-vkorg,
matnr LIKE mara-matnr ,
vtweg LIKE vbak-vtweg,
END OF i_report_mvke.
***********************TEMP COPY
DATA: BEGIN OF i_report_temp OCCURS 0,
vbeln LIKE vbrp-vbeln, "Billing Document
posnr LIKE vbrp-posnr,
matnr LIKE mara-matnr ,
aubel LIKE vbrp-aubel, "Sales Document
fkimg LIKE vbrp-fkimg, "Actual billed quantity
vrkme LIKE vbrp-vrkme, "Sales unit
arktx LIKE vbrp-arktx, "Short text for sales order item
vgbel LIKE vbrp-vgbel, "Doc number of the reference document
werks LIKE vbap-werks,
vkgrp LIKE vbrp-vkgrp,
fklmg LIKE vbrp-fklmg,
volum LIKE vbrp-volum,
vkbur LIKE vbrp-vkbur,
vtweg_auft LIKE vbrp-vtweg_auft,
auart LIKE vbak-auart,
tabix LIKE sy-tabix, "Internal Table, Current Row Index
name1 LIKE kna1-name1, "Name1
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
orqty TYPE p DECIMALS 0,
penqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
openqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
ean11 LIKE lips-ean11, "International Article No(EAN/UPC)
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
traid LIKE likp-traid,
ort01 LIKE lfa1-ort01, "City
lifnr LIKE lfa1-lifnr, "A/c Number of Vendor or Creditor
netwr LIKE vbrp-netwr, "Net val of bill item in doc currency
kunnr LIKE vbak-kunnr, "Sold-to party
adrnr LIKE vbpa-adrnr, "Address
city1 LIKE adrc-city1, "City
tprtr LIKE lfa1-name1, "Name 1
knumv LIKE konv-knumv, "Number of the document condition
kposn LIKE konv-kposn,
rate LIKE konv-kbetr, "Rate (cond amount or percentage)
bas_val LIKE konv-kwert, "Rate (cond amount or percentage)
exc_duty LIKE konv-kwert, "Rate (cond amount or percentage)
ed_cess LIKE konv-kwert, "Rate (cond amount or percentage)
freight LIKE konv-kwert, "Rate (cond amount or percentage)
pack LIKE konv-kwert, "Rate (cond amount or percentage)
cst LIKE konv-kwert, "Rate (cond amount or percentage)
vat LIKE konv-kwert, "Rate (cond amount or percentage)
ent_tax LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv_round LIKE konv-kwert, "Rate (cond amount or percentage)
disc_tot LIKE konv-kwert, "Discount total - Z001 to Z020
vat_rate LIKE konv-kbetr,
cst_rate LIKE konv-kbetr,
lst_rate LIKE konv-kbetr,
mwsbk LIKE vbrk-mwsbk,
bas_tax LIKE konv-kwert,
dev_tax LIKE konv-kwert,
tcs_tax LIKE konv-kwert,
bas_tot LIKE konv-kwert,
lst LIKE konv-kwert,
vkorg LIKE vbak-vkorg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
text1 LIKE tvm1t-bezei,
text2 LIKE tvm1t-bezei,
text3 LIKE tvm1t-bezei,
text4 LIKE tvm1t-bezei,
text5 LIKE tvm1t-bezei,
bismit_area TYPE p DECIMALS 4, " Size (L*B) in mm
face_area TYPE p DECIMALS 2, " Face Area Declaration
notional_area TYPE p DECIMALS 2,
stock_pcs TYPE p , " decimals 3 Pcs of Stock
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
bismt LIKE mara-bismt, " Size (L*B) in mm
normt LIKE mara-normt, " Industry Standard Description
temp TYPE p DECIMALS 2,
temp1 TYPE p DECIMALS 2,
temp2 TYPE p DECIMALS 2,
temp3 TYPE p DECIMALS 2,
temp4 TYPE p DECIMALS 2,
temp5 TYPE p DECIMALS 2,
temp6 TYPE p DECIMALS 2,
temp7 TYPE p DECIMALS 2,
temp8 TYPE p DECIMALS 2,
temp9 TYPE p DECIMALS 2,
temp10 TYPE p DECIMALS 2,
temp11 TYPE p DECIMALS 2,
temp12 TYPE p DECIMALS 2,
temp13 TYPE p DECIMALS 0,
temp14 TYPE p DECIMALS 0,
temp15 TYPE p DECIMALS 0,
temp16 TYPE p DECIMALS 2,
temp17 TYPE p DECIMALS 2,
temp18 TYPE p DECIMALS 2,
temp19 TYPE p DECIMALS 2,
temp20 TYPE p DECIMALS 2,
temp21 TYPE p DECIMALS 2,
waybill(20) TYPE c,
audat LIKE vbak-audat, "Document Date (Date Received/Sent)
lgort LIKE vbap-lgort, "Storage location
lgobe LIKE t001l-lgobe, "Description of storage location
erdat LIKE vbrk-erdat, "Date on which the record was created
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
acdt LIKE likp-wadat_ist, "Actual goods movement date
fkdat LIKE vbrk-fkdat,
ship LIKE kna1-name1, "Name1 (Ship-to party)
fksto LIKE vbrk-fksto,
fkart LIKE vbrk-fkart,
bezei LIKE t005u-bezei,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
ferth LIKE mara-ferth,
lbtxt LIKE t024x-lbtxt,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
desc LIKE tvkbt-bezei,
brsch LIKE kna1-brsch,
zeinr LIKE mara-zeinr,
bzirk LIKE vbrk-bzirk,
area_desc LIKE tnlst-bezei,
dist_desc TYPE tkukt-vtext,
taluka_desc TYPE t016t-brtxt,
sales_desc TYPE tvgrt-bezei,
kmein LIKE konv-kmein, "Sales Unit
challan LIKE likp-vbeln,
END OF i_report_temp.
DATA: BEGIN OF i_vbap OCCURS 0 ,
posnr LIKE vbap-posnr,
vbeln LIKE vbap-vbeln ,
matnr LIKE vbap-matnr ,
werks LIKE vbap-werks,
kwmeng LIKE vbap-kwmeng,
lgort LIKE vbap-lgort,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
END OF i_vbap .
DATA : w_temp_cal(20) TYPE c.
DATA : w_face_area TYPE p DECIMALS 4,
w_notinal_area TYPE p DECIMALS 4.
**MVKE
DATA: BEGIN OF itab_mvke OCCURS 0,
matnr LIKE mvke-matnr,
vkorg LIKE vbak-vkorg,
vtweg LIKE mvke-vtweg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
END OF itab_mvke.
**TVM1T
DATA : BEGIN OF itab_tvm1t OCCURS 0,
spras LIKE tvm1t-spras,
mvgr1 LIKE tvm1t-mvgr1,
bezei LIKE tvm1t-bezei,
END OF itab_tvm1t.
DATA : BEGIN OF itab_tvm2t OCCURS 0,
spras LIKE tvm2t-spras,
mvgr2 LIKE tvm2t-mvgr2,
bezei LIKE tvm2t-bezei,
END OF itab_tvm2t.
DATA : BEGIN OF itab_tvm3t OCCURS 0,
spras LIKE tvm3t-spras,
mvgr3 LIKE tvm3t-mvgr3,
bezei LIKE tvm3t-bezei,
END OF itab_tvm3t.
DATA : BEGIN OF itab_tvm4t OCCURS 0,
spras LIKE tvm4t-spras,
mvgr4 LIKE tvm4t-mvgr4,
bezei LIKE tvm4t-bezei,
END OF itab_tvm4t.
DATA : BEGIN OF itab_tvm5t OCCURS 0,
spras LIKE tvm5t-spras,
mvgr5 LIKE tvm5t-mvgr5,
bezei LIKE tvm5t-bezei,
END OF itab_tvm5t.
DATA: itab_t024x TYPE STANDARD TABLE OF t024x WITH HEADER LINE,
it_report LIKE LINE OF i_report OCCURS 0,
i_mvke LIKE LINE OF itab_mvke OCCURS 0.
**VBKD
DATA: BEGIN OF i_vbkd OCCURS 0 ,
vbeln LIKE vbkd-vbeln ,
posnr LIKE vbkd-posnr ,
bzirk LIKE vbkd-bzirk ,
END OF i_vbkd .
DATA: BEGIN OF i_lips OCCURS 0,
vbeln LIKE lips-vbeln,
ean11 LIKE lips-ean11,
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
waybill(20) TYPE c,
END OF i_lips.
DATA: BEGIN OF i_vbrk OCCURS 0,
vbeln LIKE vbrk-vbeln,
rfbsk LIKE vbrk-rfbsk, "Status for transfer to accounting
erdat LIKE vbrk-erdat, "Dt on which the record was created
fkdat LIKE vbrk-fkdat, "CHANGE MADE BY PARTHA RAHAMAN
fksto LIKE vbrk-fksto, "GOPAL:: CANCELLED DOC. DO NOT PRNT.
netwr LIKE vbrk-netwr,
fkart LIKE vbrk-fkart, "Gopal:when billng typ=s1 do not pnt 1jul
knumv LIKE vbrk-knumv,
mwsbk LIKE vbrk-mwsbk,
bzirk LIKE vbrk-bzirk,
vtweg LIKE vbrk-vtweg,
spart LIKE vbrk-spart,
END OF i_vbrk.
*structure for MARD Table by kalika
DATA : BEGIN OF itab_mard OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
lgort LIKE mard-lgort, " Storage Location
END OF itab_mard.
*structure for MARD Table by kalika
DATA:BEGIN OF i_kna1 OCCURS 0,
vbeln LIKE vbak-vbeln,
name1 LIKE kna1-name1,
kunnr LIKE kna1-kunnr,
regio LIKE kna1-regio,
bezei LIKE t005u-bezei,
land1 LIKE kna1-land1,
vkgrp LIKE vbak-vkgrp,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
brsch LIKE kna1-brsch,
vkbur LIKE vbak-vkbur,
END OF i_kna1.
DATA:BEGIN OF i_t005u OCCURS 0,
spras LIKE t005u-spras,
land1 LIKE t005u-land1,
bland LIKE t005u-bland,
bezei LIKE t005u-bezei,
END OF i_t005u.
DATA:BEGIN OF i_tnlst OCCURS 0,
spras LIKE t005u-spras,
niels LIKE tnlst-niels,
bezei LIKE t005u-bezei,
END OF i_tnlst.
DATA:BEGIN OF itab_tkukt OCCURS 0,
spras LIKE tkukt-spras,
kukla LIKE tkukt-kukla,
vtext LIKE tkukt-vtext,
END OF itab_tkukt.
DATA : BEGIN OF itab_t016t OCCURS 0,
spras LIKE t016t-spras,
brsch LIKE t016t-brsch,
brtxt LIKE t016t-brtxt,
END OF itab_t016t.
DATA : BEGIN OF itab_tvgrt OCCURS 0,
spras LIKE tvgrt-spras,
vkgrp LIKE tvgrt-vkgrp,
bezei LIKE tvgrt-bezei,
END OF itab_tvgrt.
*DATA: i_t005u TYPE STANDARD TABLE OF t005u WITH HEADER LINE.
DATA:BEGIN OF i_kna2 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1, " For Ship-to-Party
END OF i_kna2.
DATA:BEGIN OF i_vbak OCCURS 0,
vbeln LIKE vbak-vbeln,
vbtyp LIKE vbak-vbtyp,
audat LIKE vbak-audat,
auart LIKE vbak-auart,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
END OF i_vbak.
DATA:BEGIN OF i_adrc OCCURS 0,
vbeln LIKE vbpa-vbeln,
kunnr LIKE kna1-kunnr,
city1 LIKE adrc-city1,
name1 LIKE kna1-name1, "Name1 (Ship-to party)
END OF i_adrc.
DATA:BEGIN OF i_lfa1 OCCURS 0,
lifnr LIKE vbpa-lifnr,
vbeln LIKE vbpa-vbeln,
name1 LIKE lfa1-name1,
END OF i_lfa1.
DATA : BEGIN OF it_knumv OCCURS 0,
vbeln LIKE vbrk-vbeln,
knumv LIKE vbrk-knumv,
END OF it_knumv.
DATA : BEGIN OF it_rate OCCURS 0,
ksteu LIKE konv-ksteu, "Condition control
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kbetr LIKE konv-kbetr, "Rate (condition amount or percentage)
kwert LIKE konv-kwert, "Condition value
kposn LIKE konv-kposn,
kmein LIKE konv-kmein, "Sales Unit
END OF it_rate.
DATA: BEGIN OF itab_exnum OCCURS 0,
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
rdoc LIKE j_1iexchdr-rdoc, "Reference Document 1
status LIKE j_1iexchdr-status,
END OF itab_exnum.
DATA: BEGIN OF itab_qty OCCURS 0,
kwmeng LIKE vbap-kwmeng,
vbeln LIKE vbap-vbeln,
lgort LIKE vbap-lgort,
END OF itab_qty.
*DATA: BEGIN OF i_stloc OCCURS 0,
lgort LIKE t001l-lgort,
lgobe LIKE t001l-lgobe,
END OF i_stloc.
DATA:t_line LIKE STANDARD TABLE OF tline INITIAL SIZE 0
WITH HEADER LINE,
" itab_tvkbt LIKE STANDARD TABLE OF tvkbt WITH HEADER LINE,
w_tdname LIKE thead-tdname.
DATA : BEGIN OF itab_tvkbt OCCURS 0,
spras LIKE tvkbt-spras,
vkbur LIKE tvkbt-vkbur,
bezei LIKE tvkbt-bezei,
END OF itab_tvkbt.
DATA: BEGIN OF i_exchdr OCCURS 0,
exnum LIKE j_1iexchdr-exnum,
exdat LIKE j_1iexchdr-exdat,
rdoc LIKE j_1iexchdr-rdoc,
END OF i_exchdr.
DATA: BEGIN OF i_likp OCCURS 0,
vbeln LIKE likp-vbeln,
wadat_ist LIKE likp-wadat_ist,
traid LIKE likp-traid,
bolnr LIKE likp-bolnr,
END OF i_likp.
DATA: BEGIN OF i_mara OCCURS 0,
matnr LIKE mara-matnr,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
wgbez LIKE t023t-wgbez,
bismt LIKE mara-bismt,
normt LIKE mara-normt,
ferth LIKE mara-ferth,
zeinr LIKE mara-zeinr,
extwg LIKE mara-extwg,
spart LIKE mara-spart,
END OF i_mara.
DATA: BEGIN OF i_t023t OCCURS 0,
matkl LIKE t023t-matkl,
wgbez LIKE t023t-wgbez,
END OF i_t023t.
DATA : var_length(20) TYPE c,
var_breadth(20) TYPE c.
DATA: p_w_value LIKE konv-kwert.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv, " Event for Table to creater fieldcatalog
wa_fieldcat LIKE LINE OF it_fieldcat, " Work Area for table field catalog
lt_top_of_page TYPE slis_t_listheader, " Header table for top of page
i_layout TYPE slis_layout_alv . " It will fill the layout
gt_event TYPE slis_t_event. " Table Event
*DATA :
"itab_tnlst TYPE STANDARD TABLE OF tnlst WITH HEADER LINE,
" itab_tkukt TYPE STANDARD TABLE OF tkukt WITH HEADER LINE,
*" itab_t016t TYPE STANDARD TABLE OF t016t WITH HEADER LINE,
itab_tvgrt TYPE STANDARD TABLE OF tvgrt WITH HEADER LINE.
*& SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK block
WITH FRAME TITLE text-100.
SELECT-OPTIONS: s_date FOR vbrk-fkdat OBLIGATORY,
s_vkbur FOR vbak-vkbur OBLIGATORY,
s_vtweg FOR vbrk-vtweg OBLIGATORY,
s_werks FOR vbap-werks,
s_spart FOR vbrk-spart OBLIGATORY,
s_matkl FOR mara-matkl.
PARAMETERS:
r_opt3 RADIOBUTTON GROUP grp1,
r_opt2 RADIOBUTTON GROUP grp1.
r_opt4 RADIOBUTTON GROUP grp1,
r_opt5 RADIOBUTTON GROUP grp1,
r_opt1 RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK block.
*& INITIALIZATION
INITIALIZATION.
r_opt2 = 'X'.
*& START-OF-SELECTION.
START-OF-SELECTION.
*select data from VBRP
SELECT vbeln
posnr
matnr
aubel
fkimg
vrkme
arktx
vgbel
werks
vkgrp
fklmg
volum
vkbur
vtweg_auft
FROM vbrp
INTO TABLE i_report
WHERE "erdat IN s_date
AND spart IN s_spart
vkbur IN s_vkbur
AND vtweg_auft IN s_vtweg.
**logic for Pending, Summary & Detail Report
IF
r_opt1 EQ 'X' OR
r_opt2 EQ 'X' OR
r_opt3 EQ 'X'.
SELECT vbeln
rfbsk
erdat
fkdat
fksto
netwr
fkart
knumv
mwsbk
bzirk
vtweg
spart
FROM vbrk INTO TABLE i_vbrk
FOR ALL ENTRIES IN i_report
WHERE "vbeln = i_report-vbeln
" and
fkdat IN s_date
AND fkart IN ('ZBHR', 'ZTZT', 'ZKRP', 'ZRUD', 'ZBSR',
'ZGHT', 'ZKOL', 'ZPTN', 'ZRNC', 'ZCND',
'ZDLH', 'ZGZB', 'ZGUR', 'ZHSR', 'ZJPR',
'ZLKW', 'ZBLR', 'ZCHN', 'ZCBM', 'ZHUB',
'ZHYD', 'ZKOC', 'ZAHD', 'ZIND', 'ZMUM',
*********************MODIFICATION BY CHAKRAPANI (ADDITION OF ZVIJ AND ZHWH ) 18.05.2007
'ZNGP', 'ZPNE', 'ZRPR' , 'ZEXP', 'ZDEM','ZVIJ', 'ZHWH','JEX' )
*********************MODIFICATION BY CHAKRAPANI (ADDITION OF ZVIJ AND ZHWH ) 18.05.2007
AND vtweg IN s_vtweg
AND spart IN s_spart
AND fksto NE 'X'.
IF i_vbrk[] IS NOT INITIAL.
SELECT vbeln
posnr
matnr
aubel
fkimg
vrkme
arktx
vgbel
werks
vkgrp
fklmg
volum
vkbur
vtweg_auft
FROM vbrp
INTO TABLE i_report
FOR ALL ENTRIES IN i_vbrk
WHERE vbeln = i_vbrk-vbeln "erdat IN s_date
AND spart IN s_spart
AND vkbur IN s_vkbur
AND vtweg_auft IN s_vtweg.
ENDIF.
ELSEIF r_opt4 EQ 'X' OR
r_opt5 EQ 'X'.
SELECT vbeln
rfbsk
erdat
fkdat
fksto
netwr
fkart
knumv
mwsbk
bzirk
vtweg
spart
FROM vbrk INTO CORRESPONDING FIELDS OF TABLE i_vbrk
FROM vbrk INTO TABLE i_vbrk
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-vbeln
AND fkart EQ 'ZEXP'
AND vtweg IN s_vtweg
AND spart IN s_spart
AND fksto NE 'X'.
ENDIF.
SORT i_vbrk BY vbeln ASCENDING.
ENDIF.
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SORT it_report BY aubel.
*select VBAP data
SELECT posnr vbeln matnr werks
kwmeng lgort
FROM vbap
INTO TABLE i_vbap
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel.
ENDIF.
change amit by my self may be removed
*select data from VBKD
IF NOT i_vbap[] IS INITIAL.
SELECT vbeln posnr
FROM vbkd
INTO TABLE i_vbkd
FOR ALL ENTRIES IN i_vbap
WHERE vbeln = i_vbap-vbeln.
ENDIF.
SORT i_vbap BY vbeln ASCENDING.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING matnr.
SORT it_report BY matnr.
SELECT
matnr
matkl
mtart
labor
bismt
normt
ferth
zeinr
extwg
spart
FROM mara
INTO TABLE i_mara
FOR ALL ENTRIES IN i_report
WHERE matnr = i_report-matnr
AND spart IN s_spart.
ENDIF.
IF NOT i_mara[] IS INITIAL.
SORT i_mara BY matnr.
SELECT matnr
labst
FROM mard
INTO TABLE itab_mard
FOR ALL ENTRIES IN i_mara
WHERE matnr = i_mara-matnr.
ENDIF.
ENDIF.
DATA : it_mara LIKE LINE OF i_mara OCCURS 0.
IF NOT i_mara[] IS INITIAL.
REFRESH it_mara.
it_mara[] = i_mara[].
DELETE ADJACENT DUPLICATES FROM it_mara COMPARING matkl.
SORT it_mara BY matkl.
SELECT matkl wgbez
FROM t023t
INTO TABLE i_t023t
FOR ALL ENTRIES IN it_mara
WHERE matkl = it_mara-matkl.
*T024X
REFRESH it_mara.
it_mara[] = i_mara[].
DELETE ADJACENT DUPLICATES FROM it_mara COMPARING labor.
SORT it_mara BY labor.
SELECT * FROM t024x
INTO TABLE itab_t024x
FOR ALL ENTRIES IN it_mara
WHERE labor = it_mara-labor
AND spras = sy-langu.
ENDIF.
*begin of change amit
LOOP AT i_vbap.
READ TABLE i_mara WITH KEY matnr = i_vbap-matnr.
IF sy-subrc = 0.
*material type & material group
i_vbap-mtart = i_mara-mtart.
i_vbap-matkl = i_mara-matkl.
ENDIF.
MODIFY i_vbap.
ENDLOOP.
*Material Group Description
*end of change amit
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vgbel.
SORT it_report BY vgbel.
SELECT vbeln
ean11
volum
lgmng
FROM lips
INTO TABLE i_lips
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-vgbel.
ENDIF.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY vgbel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vgbel.
IF i_lips[] IS NOT INITIAL.
SELECT vbeln
wadat_ist
traid
bolnr
FROM likp
INTO TABLE i_likp
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-vgbel.
ENDIF.
SORT i_lips BY vbeln ASCENDING.
LOOP AT i_lips.
REFRESH t_line.
CLEAR w_tdname.
w_tdname = i_lips-vbeln.
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = 'ZVOW'
language = sy-langu
name = w_tdname
object = 'VBBK'
TABLES
lines = t_line
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT t_line.
CONCATENATE i_lips-waybill t_line-tdline INTO i_lips-waybill.
ENDLOOP.
IF sy-subrc EQ 0.
MODIFY i_lips.
ENDIF.
ENDLOOP.
*IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT a~vbeln
b~name1
b~kunnr
b~regio
b~land1
a~vkgrp
b~niels
b~kukla
b~brsch
a~vkbur
FROM vbak AS a
INNER JOIN kna1 AS b
ON akunnr = bkunnr
INTO TABLE i_kna1
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-aubel.
AND land1 = 'IN'.
*endif.
DATA : it_kna1 LIKE LINE OF i_kna1 OCCURS 0.
IF NOT i_kna1[] IS INITIAL.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY regio.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING regio.
SELECT spras
land1
bland
bezei FROM t005u
INTO TABLE i_t005u
FOR ALL ENTRIES IN it_kna1
WHERE bland = it_kna1-regio
AND spras = 'EN' AND land1 = 'IN'.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY niels.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING niels.
SELECT spras niels bezei FROM tnlst
INTO TABLE i_tnlst
FOR ALL ENTRIES IN it_kna1
WHERE niels = it_kna1-niels
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY kukla.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING kukla.
SELECT spras kukla vtext FROM tkukt
INTO TABLE itab_tkukt
FOR ALL ENTRIES IN it_kna1
WHERE kukla = it_kna1-kukla
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY brsch.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING brsch.
SELECT spras brsch brtxt FROM t016t
INTO TABLE itab_t016t
FOR ALL ENTRIES IN it_kna1
WHERE brsch = it_kna1-brsch
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY vkgrp.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING vkgrp.
SELECT spras vkgrp bezei FROM tvgrt
INTO TABLE itab_tvgrt
FOR ALL ENTRIES IN it_kna1
WHERE vkgrp = it_kna1-vkgrp
AND spras = sy-langu.
ENDIF.
SORT i_kna1 BY vbeln ASCENDING.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT a~vbeln
a~kunnr
b~city1
FROM vbpa AS a
INNER JOIN adrc AS b
ON aadrnr = baddrnumber
INTO TABLE i_adrc
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel
AND parvw = 'WE'.
SORT i_adrc BY vbeln ASCENDING.
ENDIF.
DATA : it_adrc LIKE LINE OF i_adrc OCCURS 0.
IF i_adrc[] IS NOT INITIAL.
REFRESH it_adrc.
it_adrc[] = i_adrc[].
SORT it_adrc BY kunnr.
DELETE ADJACENT DUPLICATES FROM it_adrc COMPARING kunnr.
SELECT kunnr name1
FROM kna1
INTO TABLE i_kna2
FOR ALL ENTRIES IN it_adrc
WHERE kunnr = it_adrc-kunnr.
ENDIF.
SELECT a~lifnr
a~vbeln
b~name1
FROM vbpa AS a
INNER JOIN lfa1 AS b
ON alifnr = blifnr
INTO TABLE i_lfa1
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-vgbel
AND parvw = 'SP'.
SORT i_lfa1 BY vbeln ASCENDING.
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY vbeln.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vbeln.
SELECT exnum
exdat
rdoc
status
FROM j_1iexchdr
INTO TABLE itab_exnum
FOR ALL ENTRIES IN it_report
WHERE rdoc = it_report-vbeln AND status = 'P' OR status = 'C' .
ENDIF.
change amit by my self may be removed
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT kwmeng
vbeln
lgort
FROM vbap
INTO TABLE itab_qty
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel.
ENDIF.
change amit by my self may be removed
SORT itab_qty BY vbeln.
CHECK NOT i_vbrk[] IS INITIAL.
SORT i_report BY vbeln.
DATA : t_vbrk LIKE LINE OF i_vbrk OCCURS 0.
REFRESH t_vbrk.
t_vbrk[] = i_vbrk[].
SORT t_vbrk BY knumv.
DELETE ADJACENT DUPLICATES FROM t_vbrk COMPARING knumv.
SELECT ksteu
knumv
kschl
kbetr
kwert
kposn
kmein
FROM konv
INTO TABLE it_rate
FOR ALL ENTRIES IN t_vbrk
WHERE knumv = t_vbrk-knumv
AND kschl IN ('ZR00', "Basic Price
'ZR01', "Basic Price
'ZR02', "Basic Price
'ZR03', "Basic Price
'ZR04', "Basic Price
'ZR05', "Basic Price
'JEXP', "Excise
'JECS', "ED
'ZG03', "Freight
'ZG04', "Freight
'JCST', "CST
'JLST', "LST
'ZDEV', "Dev Tax
'Z001', "Discount
'Z002', "Discount
'Z003', "Discount
'Z004', "Discount
'Z005', "Discount
'Z006', "Discount
'Z007', "Discount -
Short Dump while executing New Hire (action type) in PA40
Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time 21.08.2014 14:07:03
Short text
Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
include "/1PAPAXX/HDR_21000AO01 " in
line 52:
""LV_LENGTH" has already been declared"
The include has been created and last changed by:
Created by: "HCM04 "
Last changed by: "HCM03 "
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program /1PAPAXX/HDR_21000A :
""LV_LENGTH" has already been declared"
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 731
SAP Basis Level. 0007
Application server... "dc-ds-erp"
Network address...... "172.16.23.111"
Operating system..... "Linux"
Release.............. "3.0.13-0.27-default"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dc-ds-erp"
Database type..... "ORACLE"
Database name..... "ECD"
Database user ID.. "SAPSR3"
Terminal.......... "NLC-HP"
Char.set.... "C"
SAP kernel....... 720
created (date)... "Sep 14 2013 06:16:24"
create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
Database version. "OCI_112, 11.2.0.3.0, V1, default"
Patch level. 500
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 37708200
Heap.... 0
Page.... 106496
MM Used. 4666776
MM Free. 3709976
User and Transaction
Client.............. 210
User................ "HCM03"
Language key........ "E"
Transaction......... "PA40 "
Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
EPP Connection ID....... 00000000000000000000000000000000
EPP Caller Counter...... 0
Program............. "SAPFP50M"
Screen.............. "MP000000 1000"
Screen Line......... 3
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "SAPFP50M" - in
"GET_HEADER_WITH_TCLAS".
The main program was "MP000000 ".
In the source code you have the termination point in line 146
of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
EXPORTING
118
DHDID = FHD_HID
119
BEGDA = BEGDA
120
TCLAS = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
* MOLGA =
125
P0001 = P0001
126
PERNR = PSPAR-PERNR
127
IMPORTING
128
PROG = HEADER_PROG
129
DNUM = HEADER_DYNNR
130
EXCEPTIONS
131
HEADER_DEACTIVATED = 1
132
HEADER_UNKNOWN = 2
133
HEADER_GENERATE_DEACTIVATED = 3
134
HEADER_GENERATE_FAILED = 4
135
INTERNAL_ERROR = 5
136
OTHERS = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
HEADER_PROG = 'SAPMP50A'.
141
HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL. "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL. "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once! -
System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.
Hello Experts,
I got short dump while executing data source 2LIS_11_VASCL in RSA3.
The details are as follow.
When importing object "MC11VA0SCL_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 567.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
I have checked source and target fields and those are of same length and data type.
Could you please give some points why this short dump occurs.
Thanks
Konda ReddyHi,
This error is not between BI and R/3. It is within R/3. You may have setup data and then modified the datasource.
Delete setup data, generate your datasource again. Setup data and try again.
If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
Cheers.... -
Short Dump while using BAPI_PS_PRECOMMIT to set Project Definition Status
Hi All,
I am getting a short dump while using BAPI_PS_PRECOMMIT for setting the Project Definition status..
The requirement is to create a Project Definition and then set its status to REL from CRTD. For this purpose i am using the BAPI's in the following sequence :
1. BAPI_PS_INITIALIZATION
2. BAPI_PROJECT_MAINTAIN
3. BAPI_BUS2001_SET_STATUS
4. BAPI_PS_PRECOMMIT
5. BAPI_TRANSACTION_COMMIT
The Proj Def creation is happening successfully in step2. Interestingly, when I debug the program and stop at PRECOMMIT BAPI the program does not give a dump. I have also tried to give COMMIT WORK / WAIT FOR n SECONDS after BAPI_BUS2001_SET_STATUS, to give BAPI sometime for DB update but nothing seems to be a permanent solution.
Please give your views on a solution for this problem..
Thanks & Regards,
SomilCan you please check how to post code in SDN ...
I cannot read your code properly -
Short Dump while execuition of DTP.
Hi,
I got short dump while execuiting the DTP.
Error messages shows as below:
1.The database returned a value containing an error
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.Exception CX_SY_NO_HANDLER logged
Could you please help us in solving this issue.
Regards,
Suman.hi,
an error like this comes usually in 2 cases
1) not enough resources are available to carry out loads.in this case increase no of parallel processes to 2-3 in dtp setting,check the option get delta request by request(if its a delta load) and decrease packet size to 10000(from default 50000)
2)fileld to field assignment is not proper:
u need to check if there is any source field with lenth lets say 5 ans is getting assisgned to a target field length lets say 4.in this case dumps will come
please check the error message in st22 and here you can also check the termination point.please check in option Chosen variables /contents of system fileds where you can get temp values at point of termination.here you can pinpoint values at which prog is throwing dumps. -
Hi,
Can anybody help me out as I am getting a short dump while navigating to particular screen.
The error was triggered when i was binding an internal table to node in my second view.
The short dump shows as below.
■The following error text was processed in the system EID : Zugriff über 'NULL' Objektreferenz nicht möglich.
■The error occurred on the application server ECCIDES_EID_00 and in the work process 1 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: HANDLEFROM_EXPORTS_INIT of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
Method: HANDLEFROM_EXPORTS_INIT of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/4QJM86ZSS4V4M81W8MTQ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system EID in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ECCIDES_EID_00 in transaction SM21.
■If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server ECCIDES_EID_00 . In some situations, you may also need to analyze the trace files of other work processes.
■If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 700 -u: OBIZDEV -l: E -s: EID -i: ECCIDES_EID_00 -w: 1 -d: 20110723 -t: 161516 -v: RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED_NO
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please help.Hu Saravanan,
Please find my code below in HANDLEFROM_EXPORTS_INIT and
method HANDLEFROM_EXPORTS_INIT .
data : WRK_DOC_CLAS type /OBIZ/ZXP_DOCCLS-DOC_CLAS.
data : it_doc type TABLE OF /OBIZ/ZXP_SHPHD.
DATA : doc_node type REF TO if_wd_context_node.
BREAK-POINT.
if doc_desc = 'Quotation'.
WRK_DOC_CLAS = '0001'.
elseif doc_desc = 'Sales Order'.
WRK_DOC_CLAS = '0002'.
elseif doc_desc = 'Delivery'.
WRK_DOC_CLAS = '0003'.
elseif doc_desc = 'Proforma Invoice'.
WRK_DOC_CLAS = '0004'.
elseif doc_desc = 'Billing'.
WRK_DOC_CLAS = '0006'.
ENDIF.
select * INTO CORRESPONDING FIELDS OF TABLE
it_doc FROM /OBIZ/ZXP_SHPHD WHERE doc_clas = WRK_DOC_CLAS.
call METHOD doc_node->bind_table
EXPORTING new_items = it_doc.
endmethod.
I have imported doc_desc via my inbound plug in the view.
Regards
Deric -
Short Dump while maintaining conditions in Product master
Hi Experts,
We are getting short dump while we want to maintain conditions in the product master.
The dump message is as follows -
CREATE DATA: The specified type "/1CN/WS_ID_300PRODUCTBBP_SKU_T" is no valid
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
caught in
procedure "/SAPCND/MNT_INIT_OW" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The dynamically specified type "/1CN/WS_ID_300PRODUCTBBP_SKU_T" at CREATE DATA
is no valid data type.
The type is either unknown or an object type.
I checked for OSS note but could not get success and also i could not explore in SDN. Can anybody help me in this.
Thanks a lot in advance!!
Thank You
AbhinandanHi
<b>Please go through the following SAP OSS Notes, which will definitely help -></b>
<u>Note 930816 - Cond. Maint. group not generated after remote client copy</u>
<u>Note 1051896 - Cond. group WS deleted in source aft. remote client copy</u>
Note 971825 - Short dump caused by dynamic working set
Note 969475 Short dump after applying notes 966127&966197
Note 661287 - Name of the condition maintenance group
Note 1009001 - ShortDump when Creating Mkt-Obj by Copying
Do let me know.
Regards
- Atul -
Error while creating Org structure Message no. BBP_LOCATION009
Hi
Iam trying to build an SRM6.0 with backend as R/3 4.7
I have replicated the plats from back end with report BBP_LOCATIONS_GET_FROM_SYSTEM
On errors rectified the same and finally, SLG1 report shows no errors.
But still noticed that T77S0 table entry with GPID=EBP, SEMID= LMIGR is not set to X (Refer note 563180)
Due to the above problem while creating org structure when I click on Att inheritence or Extended attributes Locations tab,
I get the message:
Start program BBP_LOCATIONS_GET_ALL first (see Note 563180 and long text)
Message no. BBP_LOCATION009
Diagnosis
You tried to call a program that uses a location. The locations have not
yet been replicated.
System Response
The current program has been terminated.
Procedure
Start the program to replicate the locations. You can find more
information in SAPNet in Note .
Procedure for System Administration
You can disable this message by starting table maintenance (SM30) for
table T77S0. Change the entry EBP/LMIGR to "X". Note that the system
cannot supply certain information if the locations are not replicated.
Locations that do not exist can be deleted during attribute maintenance.are you working with multiple backend systems?
can you retry downloading the plants with the report
BBP_LOCATIONS_GET_ALL
and then give the logical sys name as yr present backend?
BR
Dinesh -
Short dump while executing few queries , which has got created on Infoset.
Hi,
We went to BI7.0 upgrade from BW3.x now.
We are getting short dump short dump while executing few queries and work book, which has got created on Infoset.
When i was executing work book where i was geting popup message saying that "Erro ZSD_XST_F00121 is invalid".When i click that message it went to dump.
I was getting this error while executing query on infoset.
We are currently SP Stack 13(Patch level 15).
I found some note 1067918 as per the shortdum,where it is saying that you need to apply SP Stack14(patch level16).
Please some one who had earlier this kind of issue.
I appreciate your answer.Dear Krish,
Yes, It is the patch problem.
We too faced the same issue on Infosets.
Apply SP 15.
Regards,
Ram. -
Short dump while activating process chain
Please let me know the cause of short dump while activating process chain.. when trying to activate local process chains in metachain it is causing dump
Can you share more details about error.
Have you done any changes to local chain? or is this is new chain?
Try to remove meta chain from schedule, later activate your local chain and meta chain.
schedule your meta chain. -
Short Dump while activating Transformation through Program
HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
PrasadHi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin
Maybe you are looking for
-
Subject says it all.. and yes, I did search on this topic first. My AE team gives me QT files all day long that are progressive (regardless of frame rate) and my timelines are 99% of the time progressive (even when working at 29.97 fps) but I have to
-
ITunes crashed...library is lost
iTunes (11.0.1) was not responding so I force quit it. When I went re-open it I got an 'unable to open...unknown error' message. I rebooted my computer and when I opened iTunes I got some sort of library error. I don't remember what it said. Now
-
- About the new Flash object fix in 8.0.2
Any way to tell DW8.0.2 not to automatically create a Scripts folder and new .js file when inserting a Flash object, but STILL have it insert the HTML portion? Reason I'm asking is because I've got the .js part included in my main .js file on all my
-
Adobe wont print or download word docs. It's taken over our SYSTEM!!!
What happened to Adobe? Where have you gone? First of all, where is a decent support link that doesn't take you everywhere to avoid direct support or to ask a question????? I am a potential cusotmer for our organization. We have loaded the adobe 9 tr
-
Help My Library Disappeared and when i try to import it....
says*Itunes can not import this file because it is not a vaild exported file and when i do try to export it says save as in the file ***(sry) and each time i open itunes it says importing and at the end says damaged itunes games and library. Need som