Short dumps in ST22

Hi,
I get a set of 30 dumps daily on my Solman system.
The user is SMD_RFC & the dump is as follows:
Runtime Errors         CREATE_DATA_UNKNOWN_TYPE
Exception              CX_SY_CREATE_DATA_ERROR
Date and Time          28.01.2011 00:30:52
Short text
     CREATE DATA: The specified type "/BI0/V0MSS_C04D2" is no valid data ty
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_SMD_AGGREGATE_MDX==========CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
     caught in
    procedure "INITIALIZE" "(METHOD)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The dynamically specified type "/BI0/V0MSS_C04D2" at CREATE DATA is no valid
     data type.
    The type is either unknown or an object type.
I found Note 1492999..however this is for DB6, whereas I'm on SQL.
Some of the dumps have the specified type with MSS in the short text..while some dumps have the specified type as DB6.
I couldn't find a note for MSS:(
We're on SP25.
pls. help.
Thanks,
Saba.

> oh..i coudldn't find it in the script section of DBACOCKPIT...how do i run this?
in the script section? That is a transaction called by SOLMAN_SETUP to set up the BI content/connection
> I know these dumps are basically harmless..but still, cing 30 of them daily sure doen'st bring a smile to your face every morning:(
Harmless in the sense that the data can't be put into those cubes, they are mainly used by SolMan diagnostics.
Markus

Similar Messages

Reading Short Dump in ST22

Hi , Is there any Function Module or a way to read the Short Dump generated in ST22 for a particular program.?
I have a Z program running in Background on daily basis.For error Handling , when the program generates a short dump , i want to read the short dump. I tried the FM /SDF/GET_DUMP_LOG .with this i am able to read the runtime error , exception , error short text but i am unable to read the entire log description.
like what happened , what can u do etc which can be viewed in st22.Any Inputs Appreciated.
Thanks & Regards,
John.

Hi,
Try FM
"STRUCTURE_DUMP" -- Current contents of internal tables will be printed
RS_SNAP_DUMP_DISPLAY
Best regards,
Prashant

Short dump in ST22

My application is running correctly and we never getting any dump in browser but in ST22 there are thousands of dumps recorded for application.
The details are as below. My all services are activated. Kindly suggest what could be the cause
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WD_GENERAL
Date and Time          07/07/2011 10:39:42
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_WD_GENERAL' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CX_WD_GENERAL=================CP' has to be
     terminated.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    WebDynpro Exception: ICF service node
    "/sap/bc/webdynpro/sap/App/undefined" does not exist (see SAP Note
    1109215).
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_WD_GENERAL"
    "CX_WD_GENERAL=================CP" or "CX_WD_GENERAL=================CM003"
    "RAISE"

Hi Shefali,
In ST22 what does in show in the "Source Code Extract" session. Usually it points to code which raosed the exception.
You can try putting a breakpoint there and see what happens at runtime.
Please revert back in case of doubts.
Regards,
Sumit

How to delete the short dump list in st22

Hi all,
i want to clear the runtime error list in ST22.
How to clear the list of short dump in ST22.
is there any T.code kindly suggest
thanks in advance
Sundar.c

Dear Sundar,
By default, short dumps are stored in the system for 14 days. The transaction for managing short dumps is ST22. You can delete short dumps in accordance with a time specification using the Reorganize function, which you can call by choosing
Goto u2192 Reorganize in ST22. You can save a short dump without a time limit using the Keep function, which you can choose under Short Dump u2192 Keep/Release in ST22.
The short dumps are stored in table SNAP. If there are too many entries in table SNAP, problems can occur during the reorganization (see SAP Note 11838). There are different options for deleting short dumps from table SNAP:
1. Call transaction ST22. Choose Goto u2192 Reorganize. You can now specify that all short dumps older than n days old (default 7) are to be deleted. If a very large number of records are deleted at once during the reorganization,
ORACLE error ora1562, failed to extend rollback segment ..., can occur. In this case, see SAP Note 6328.
2. Dropping and recreating table SNAP with the database utility (transaction SE14): you can use this transaction to drop and recreate the table SNAP. This means that all short dumps are deleted.
3. The reorganization program RSSNAPDL deletes old short dumps in pieces (to avoid database problems) from table SNAP. It deletes short dumps that are not flagged for retention and are older than seven days old. Schedule this program at a time of low workload, as large changes in the database are to be expected. The program RSNAPJOB performs a standard scheduling: it starts the program RSSNAPDL every day at 1:00 a.m.
4. TableSNAP is also automatically reorganized. At every short dump that occurs in dialog (the dump is displayed immediately after it is created), a maximum of 20 short dumps that are older than 7 days old are deleted from SNAP. This reorganization should be sufficient in normal production operation.
Hope this information resolves your error and also more useful in the feature.
Thanks
Kishore

Short dump in reading selection values in Report

Hi all,
I have created a Navegational Attributte and added this Info Object in the existing Query and for this object we have created Charactistics Value Variable with Uesr Entry.
But, When we use input selection option to select a vlaue for this Variable in the Variable Selection Screen it is trying to read the values and going into short Dump but for other variables Selection option is working fine.
Please anyone help me if you have the solution.
Regards,
Ali.

Hi,
Try deleting the master data and reload the master data again and check for the selection variables. Check the short dump in ST22 it will say which master table ie SID table or master table where the join fails.
Thanks,
Arun

Short dump error report

What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?

hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani

Short dump while using FM "BAPI_GOODSMVT_CREATE" in background

Hi Sir,
I am using the FM "BAPI_GOODSMVT_CREATE" to create the Goods movement. While running the program through a job in background, article docu is generated successfully,,but at the same time it gives short dump in ST22.
Short text
Exception condition "CNTL_ERROR" raised.
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Please tell me what can be the possible reason for the same and how to avoid the same?
Warm regards
Krishan

There's at least one note addressing this. You should be able to find it quite easily.
Rob

Short Dump in BI 7.0,While Remodelling the Infocube

Hi Experts
I got the below short dump in BI 7.0 while remodelling infocube to add a new time char (0CALMONTH2)
Please update me what is wrong
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time
Short text
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSCNV_ADD_CHAR=============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32776).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"GETWA_NOT_ASSIGNED" " "
"CL_RSCNV_ADD_CHAR=============CP" or "CL_RSCNV_ADD_CHAR=============CM002"
"IF_RSCNV_OPERATION~CONVERT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Information on where terminated
Termination occurred in the ABAP program "CL_RSCNV_ADD_CHAR=============CP" -
in "IF_RSCNV_OPERATION~CONVERT".
The main program was "RADGENREP ".
In the source code you have the termination point in line 23
of the (Include) program "CL_RSCNV_ADD_CHAR=============CM002".
The program "CL_RSCNV_ADD_CHAR=============CP" was started as a background job.
Job Name....... "ZC13_32/ZCM_INSERT"
Job Initiator.. "GHANTAK"
Job Number..... 10521300
Source Code Extract
Line
SourceCde
1
METHOD if_rscnv_operation~convert.
2
*CALL METHOD SUPER->IF_RSCNV_OPERATION~CONVERT
3
EXPORTING
4
   I_R_OLD =
5
CHANGING
6
   C_R_NEW =
7
8
FIELD-SYMBOLS: <l_s_oldtable> TYPE ANY.
9
FIELD-SYMBOLS: <l_s_newtable> TYPE ANY.
10
FIELD-SYMBOLS: <l_fillfield> TYPE ANY.
11
FIELD-SYMBOLS: <l_addfield> TYPE ANY.
12
DATA: l_r_fillfield TYPE REF TO data.
13
DATA: l_r_addfield TYPE REF TO data.
14
15
TRY.
16
ASSIGN i_r_old->* TO <l_s_oldtable>.
17
ASSIGN c_r_new->* TO <l_s_newtable>.
18
19
ASSIGN COMPONENT p_fillfieldnm OF STRUCTURE <l_s_oldtable> TO <l_fillfield>.
20
ASSIGN COMPONENT p_addfieldnm OF STRUCTURE <l_s_newtable> TO <l_addfield>.
21
22
GET REFERENCE OF <l_fillfield> INTO l_r_fillfield.
>>>>>
GET REFERENCE OF <l_addfield> INTO l_r_addfield.
24
25
IF NOT p_constval IS INITIAL.
26
fill constant
27
CALL METHOD cl_rscnv_operation=>fill_const
28
EXPORTING
29
i_newiobj    = p_add_char
30
i_constval   = p_constval
31
i_fieldtype = o_fieldtype
32
CHANGING
33
c_r_newfield = l_r_addfield.
34
35
36
ELSEIF NOT p_attriobj IS INITIAL AND NOT p_ofiobjnm IS INITIAL.
37
fill using attribute of characteristic
38
ASSIGN i_r_old->* TO <l_s_oldtable>.
39
ASSIGN COMPONENT p_fillfieldnm OF STRUCTURE <l_s_oldtable> TO <l_fillfield>.
40
GET REFERENCE OF <l_fillfield> INTO l_r_fillfield.
41
CALL METHOD read_attr
42
EXPORTING

Hi,
i mean to say, just come out the transaction & try again..............
or else u can check the short dump in ST22...........
Regards,
SD

Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0

Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT        0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors         GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
Balaraj

Thanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
"   READ TABLE p_t_mapping ASSIGNING <fs_map>
   WITH KEY target_stepid = 0
            targetsegid   = <fs_posit>-rulesegid
            targetposit   = <fs_posit>-ruleposit
            targetid      = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj

Infopackage in process chain failing due to short dump on regular basis.

HI Experts,
There is a daily process chain in which one of the element (infopackage) fails due to short dump on regular basis (At least twice in a week) please find the message below
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
SQL error in the database when accessing a table.
And in job log it is showing ARFCSTATE = SYSFAIL
We are able to resolve it just manual update and the process goes fine no issues but my question here is what is the exact reason for this and how to resolve it permanently or decrease the frequency of the error.
Please if any one can tell the root cause and the solution to avoid the issue in future on regular basis.
and also can any one elaborate what is ARFCSTATE = SYSFAIL,for trfc check we don't have access to SM58 in ECC side
and trfc is fine in bw side
Appreciate for not giving the general solutions like repeated solutions already posted in SDN
with regards,
musai

You can contact your BASIS person he can help you reg table space issue. it says used space is 98% and free space is 1.03%.
ask your basis to set a threshold to check the space and send a mail notification to all daily regarding the space allocation and utilization.
ARFCSTATE = SYSFAIL means the TRFC did not processed properly to the BW system from source.
Monitoring object with information about tRFC and qRFC calls that are waiting to be executed in this system; after they have been executed, they are deleted from table ARFCRSTATE.
Are there any hung TRFCs which are not processed to BW side. have you checked it
first check
load monitor -- menu -- environment -- job overview -- status of job(is it finsihed or not?) - check the job log -- ther try to find out the hung TRFc
press find --tyep "sysfail" ok -- it will display all the hung or fialed TRFCs which are not processed to BW system.
if you find the hung TID with respect to your load.. next goto SM58 trasaction to process the trfcs manually or use the load monitor menu -- environment -- transaction RFC -- source sys -- it will take you to same SM58 screen -- click F8 it will display the hung TRFc in that duration.
select the TRFc and click on F6 to process them manually.
also check the loackwaits anddead locks in ST04/DB6COCKPIT.( ask basis to check) if any dead locks are there they will take care of it.
check for short dumps in st22 if any and try to analyse.
Check the SM21 system logs.

Short Dumps - How to find out in which process it occured.

Hi,
I see quiet a bunch of short dumps in ST22. Like "Message Type X". I wanted to find out in which job/process short dumps have occured?
Please help me out...
Thanks in Advance....:)
Regards,
Habeeb

Hi ,
The simplest way is to double click on a particluar dump in st22 and go in details like -What happened? ,What can you do?,How to correct the error etc .
there were plenty of options available according ot that u can dig out the error and find out the cause
(tip-usually job were failed due to some Z programs ,so better way is to search for Z* ,it will give the related object or program in most of the cases.)
hope it helps....
Regards,
Chetan R

Short Dump While Printing Good Receipt Using MIGO

I have copied standard program /SMB40/M07DR for printing Goods Receipt from MIGO for a purchase order.
I am getting a dump: ST22 (POSTING_ILLEGAL_STATEMENT)
Error analysis
    There is probably an error in the program
    "SAPLKKBL".
    This program is triggered in the update task . there, the
    following ABAP/4 statements are not allowed.
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTI
    - SUBMIT
Looked for many SAP NOTES but no luck.

When i check the short DUMP in ST22 , it gave me this information ..!!!!
error analysis
There is probably an error in the program
"SAPLKKBL".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "POSTING_ILLEGAL_STATEMENT" " "
    "SAPLKKBL" or "LKKBLU01"
    "K_KKB_LIST_DISPLAY"

Short dump while loading statistics data - 'CX_RSR_X_MESSAGE'

Hi all,
When I am loading statistics data with Init selection, system gives short dump error. Below is the message-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
If anyone know the answer please share with me.
Regards,

Hi Preet,
Please find the details of short dump from ST22-
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
     and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
Regards,

Short dump whenever BP is updated or created.

Hi Experts,
I have a new CRM system here, everytime I try to create or change a BP and save it, everything is OK. BUT when I run transaction "BP" again, there's a popup saying "Express document "Update was terminated" received from author ***". And there's a short dump in st22 saying SYSTEM_CORE_DUMPED.
In sm13 there's an entry, the error occured in module SMW3_MFLOW_UPDATETASKBDOC, "Work process restarted; session terminated".
I also checked BDoc, there's one with state I04 - "BDoc stored before update task (intermediate state".
I checked the forums and the notes and also debugged into it. As the short dump happened when calling a kernal module "RFCControl", destination is "NONE", our system is not connected with any ERP system yet.
I wonder if you guys can give me some advice.
Thanks in advance.
Shane

Raja Shekar,
Check if the PSA is full... check the Database space available for PSA and then if required extend the PSA space and see if it goes through...
Arun
Message was edited by:
Arun Varadarajan

APD is throwing short dump

Hi ,
When I try to check /execute an APD it is raising a short dump with the following message. It is happening with all the customer APD's in the system. Is there any configuration needs to setup to avoid the shortdumps.
Here are the details of error message.
"Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSAN_PR_DSGN_MAIN_TLOGO ".
In the source code you have the termination point in line 82
of the (Include) program "LRRMSU13". "
Regards,
Ramesh

Hello,
On short dump (check ST22 transaction), will probably see the following:
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 <INFOOBJECT>
SY-MSGV2 A
So please, follow the instructions below:
1. If the infoobject is active version exists. reactivate it again.
2. Please check note 1032937 APD: Partitioning with compound characteristic
This should help for your problem.
Thanks
Edward John

Short dumps in ST22

Similar Messages

Maybe you are looking for