Short Dunp While Creating a BP - Awarded points

Hello Guru's,
We have Implemented Accounts & Contact Magt in SAP CRM 4.0. I got a Ticket saying - An Account (BP) has created just and While Creating Contact person to the above Account they found a Short Dump.
500 SAP Internal Server Error
Err Msg: Error PXA_NO_FREE_SPACE occured. P1=3381248 P9=143360 (Type of termination: RABAX_STATE).
I tryed with Tcode ST22 in ABAP Runtime Error but i don't see any Shortdump. However the above error seems like No Free Space available. what could be the reason of the above Issue.
Could you Pls let me know the Solution & Ways to resolve the above Issue.
Awarded points for the best solution.
Srujan

Hello Srujan,
The PXA_NO_FREE_SPACE dump means that the program buffer, that is the buffer used to execute programs, was too small at the time of the execution; it could not store the application data and therefore dumps the application. This could be the result of a high system load (many people running many transactions/programs) or that the system parameter abap/buffersize is set too small.
Note that this problem is mostly temporarly, if it occurs often you should increase the physical amount of memory or increase the program buffer size.
Check OSS note 147568 for possible solutions and how to determine the correct amount for the system parameter abap/buffersize.
Hope this helps!
Reward points if useful!
Kind regards,
Joost

Similar Messages

Short Dump while creating Configuration (Application or Component)

Hi All,
I m facing a short dump, while creating a Component or Applcation Configuration
in the standard FPM_GAF_COMPONENT.
Short dump states the Runtine error as MESSAGE_TYPE_UNKNOWN
Short text
    Message type " " is unknown.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WDR_MESSAGE_MANAGER========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Information on where terminated
    Termination occurred in the ABAP program "CL_WDR_MESSAGE_MANAGER========CP" -
     in "IF_WD_MESSAGE_MANAGER~REPORT_T100_MESSAGE".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 16
    of the (Include) program "CL_WDR_MESSAGE_MANAGER========CM00R".
12        exporting
13           textid = cx_wdr_rt_exception=>invalid_
14   endif.
15
>>>>   message id msgid type msgty number msgno
17           with p1 p2 p3 p4
18           into msg.
19
20   if p1 is not initial.

Hello Srikanth,
I have no issues in trying to help someone as polite as you! It is very nice to have questions answered in an intelligible manner - not unfortunately always the case.
Without being able to debug on your system it is quite difficult to say what might be causing this error - especially as you say this was working in a different system.
I'm sure you've already tried eliminating differences in your authorisations between the two systems? Are you registered as a developer in the new system?
Sorry I'm now just guessing as I've not come across the error myself - hopefully now that we have clearly documented the issue, someone else might be able to shed some light on what might cause it!
Chris

Short Dump while creating transformation in BI

Dear fr,
I am extracting data from a system and passing this data to an infocube
But while creating transformation getting the follwing error
Cannot generate proposal
Message no. RSTRAN017
Please help will reward points for sure.

Hi,
Seems others already had this problem before: /thread/347000 [original link is broken]
regards,
Csaba

Short dump while creating transparent container dynamically

Hi experts!
I want to create a transparent container dynamically, but I get a Short Dump (
Note
The following error text was processed in the system NSP : Access via 'NULL' object reference not possible.
The error occurred on the application server Datatrain_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CREATE_BY_VIEW_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP)
while doing so. Below my code...
Can somebody please advise I don't know what I did wrong....
Thanks in advance!
Points will be rewarded
METHOD wddomodifyview .
DATA: lr_container TYPE REF TO cl_wd_uielement_container,
        lr_matrix_head TYPE REF TO cl_wd_matrix_data,
        lv_hlp_str TYPE string VALUE 'DYNCONT_1',
        lr_trans_cont TYPE REF TO cl_wd_transparent_container.
    lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
CALL METHOD cl_wd_transparent_container=>new_transparent_container
EXPORTING
    enabled                  = ABAP_TRUE
    id                       = lv_hlp_str
    is_layout_container      = ABAP_TRUE
receiving
    control                  = lr_trans_cont
    lr_matrix_head = cl_wd_matrix_head_data=>new_matrix_head_data(
                        element = lr_trans_cont ).
    lr_trans_cont->set_layout_data( lr_matrix_head ).
    lr_container->add_child( lr_trans_cont ).

Hi Felix,
You need to set the layout first and then set the layout data. Use the method cl_wd_matrix_layout=>new_matrix_layout. Do a set_layout on the container and then do set_layout_data. That should solve your problem.
Regards
Nithya

Short dump while creating a plant.

Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors         RAISE_EXCEPTION
Date and Time          27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance                      = instance
17
IMPORTING
18
class_name                    = class_name
19
CHANGING
20
exit_name                     = exit_name
21
EXCEPTIONS
22
no_reference                  = 1
23
no_interface_reference        = 2
24
no_exit_interface             = 3
25
data_incons_in_exit_managem   = 4
26
class_not_implement_interface = 5
27
OTHERS                        = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
43 METHOD       CL_EXITHANDLER================CP    CL_EXITHANDLER================CM001    36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION     SAPLXSZAR                           ZXSZARU01                              25
EXIT_SAPLSZAR_001
41 FUNCTION     SAPLSZAR                            LSZARU01                              108
ADDR_REGIONAL_DATA_CHECK
40 FORM         SAPLSZA2                            LSZA2F20                              382
CHECK_ADDR1_DATA
39 FUNCTION     SAPLSZA2                            LSZA2U02                               42
ADDR_CHECK
38 FUNCTION     SAPLSZA0                            LSZA0U01                               79
ADDR_INSERT
37 FORM         SAPLSZA1                            LSZA1F22                             1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM         SAPLSZA1                            LSZA1F22                             2234
PUT_ADDRESS_TO_MEMORY
35 FORM         SAPLSZA1                            LSZA1I02                              409
D0100_OK_CODE
34 FORM         SAPLSZA1                            LSZA1F03                               17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1                            LSZA1I02                               13
D0100_OK_CODE
32 FUNCTION     SAPLSZA1                            LSZA1U01                              200
ADDR_DIALOG_INTERN
31 FUNCTION     SAPLSZA1                            LSZA1U05                              177
ADDR_DIALOG
30 FORM         SAPL0ORG                            LSVIMF24                              292
ADDRESS_MAINTAIN
29 FORM         SAPL0ORG                            LSVIMFX2                              577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG                            LSVIMIXX                              354
DETAIL_PAI
27 FORM         SAPL0ORG                            LSVIMF2L                              337
CALL_DYNPRO
26 FUNCTION     SAPL0ORG                            L0ORGU34                               35
VIEWPROC_V_T001W
25 FUNCTION     SAPL0ORG                            L0ORGU33                               49
VIEWFRAME_V_T001W
24 FUNCTION     SAPLSVIM                            LSVIMU01                              138
VIEW_MAINTENANCE
23 FUNCTION     SAPLSVIM                            LSVIMU03                              427
VIEW_MAINTENANCE_CALL
22 FORM         SAPLS_CUS_ACTIVITY                  LS_CUS_ACTIVITYF01                    358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH                            LDSYHI12                               56
D1200_PAI_MODULE
20 FUNCTION     SAPLDSYH                            LDSYHU11                               70
OUTLINE_LIST_TCODES
19 FUNCTION     SAPLS_CUS_ACTIVITY                  LS_CUS_ACTIVITYU07                    103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION     SAPLS_CUS_IMG_ACTIVITY              LS_CUS_IMG_ACTIVITYU04                 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION     SAPLS_IMG_TOOL_1                    LS_IMG_TOOL_1U02                       63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION     SAPLSHI1                            LSHI1U16                              120
STREE_EXIT_TO_OBJECT
15 FORM         SAPLSHI01                           LSHI01F0Y                             185
EXIT_TO_OBJECT_HC
14 FORM         SAPLSHI01                           LSHI01F05                              70
HANDLE_LINK_CLICK
13 METHOD       SAPLSHI01                           LSHI01CI1                              25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD       CL_ITEM_TREE_CONTROL==========CP    CL_ITEM_TREE_CONTROL==========CM013    53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD       CL_ITEM_TREE_CONTROL==========CP    CL_ITEM_TREE_CONTROL==========CM00S    60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD       CL_GUI_COLUMN_TREE============CP    CL_GUI_COLUMN_TREE============CM01O    15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD       CL_TREE_CONTROL_BASE==========CP    CL_TREE_CONTROL_BASE==========CM017    32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD       CL_GUI_CFW====================CP    CL_GUI_CFW====================CM001   138
CL_GUI_CFW=>DISPATCH
7 FORM         SAPLSHI01                           LSHI01F1M                              17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION     SAPLSHI01                           LSHI01U12                              30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01                           LSHI01I01                              55
PAI_200
4 FUNCTION     SAPLSHI01                           LSHI01U07                             165
STREE_BROWSER_DYNP_HC
3 FUNCTION     SAPLSHI21                           LSHI21U03                             144
STREE_EXTERNAL_DISPLAY
2 FORM         SAPLS_IMG_TOOL_5                    LS_IMG_TOOL_5F01                       20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5                    LS_IMG_TOOL_5I01                       39
USER_COMMAND_0100
Chosen variables
Name
Val.
No.      43 Ty.          METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No.      42 Ty.          FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store        = 0x00000000
ext1         = 0xF8EB2E3D
shmId        = 0     (0x00000000)
id           = 208   (0xD0000000)
label        = 2299 (0xFB080000)
fill         = 0     (0x00000000)
leng         = 572   (0x3C020000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000317
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
collHook     = 0x00000000
ext2         = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x30F18E3D
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No.      41 Ty.          FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064            ININD000   00 15500 4111 0000 00 436      664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00                  000   00 00 00   00   0000 00             000       000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No.      40 Ty.          FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064            ININD000   00 15500 4111 0000 00 436      664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No.      39 Ty.          FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No.      38 Ty.          FUNCTION
Name ADDR_INSERT

Dear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya

Short dump while creating a new status report in webdynpro cprojects

Short dump details are
Runtime Errors       OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Access via 'NULL' object reference not possible.
GET_AVAIL_CALID" "(METHOD)", of the class CL_DPR_BUPA_DISTRIBUTION failed to capture the Business partner details.
The dump analysis shows
You attempted to use a 'NULL' object reference (points to 'nothing') access a component variable: "LR_BUPA_LINK").
    An object reference must point to an object (an instance of a class)     before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Can anyone throw some light on this?

Hello Srikanth,
I have no issues in trying to help someone as polite as you! It is very nice to have questions answered in an intelligible manner - not unfortunately always the case.
Without being able to debug on your system it is quite difficult to say what might be causing this error - especially as you say this was working in a different system.
I'm sure you've already tried eliminating differences in your authorisations between the two systems? Are you registered as a developer in the new system?
Sorry I'm now just guessing as I've not come across the error myself - hopefully now that we have clearly documented the issue, someone else might be able to shed some light on what might cause it!
Chris

Short Dump while creating transformation in SAP Trial 7.01

Hi All,
I'm getting this dump when I try to create transformation(BI 7) in Trial Version 7.01 software which I downloaded from SDN. Below is the dump error.
"Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx auf are
installed on your computer. You can find notes on installing and
checking the BW Frontend by searching for SAP Notes with the
following key words:
Version, sapservX, Setup, Patch, Installation, Frontend, BW,
sapbexc.xla, checktool, wdtaocx, wdtaocx.ocx
If the front end is installed correctly but the error still occurs,
contact SAP."
I tried some notes but they didn't help. Few other threads said to install the latest patches. I have oss user id but market place allows downloads of latest patches only through Solution Manager. How do I install Sol Man in trial software. This is what Download Basket says:
"All corrective software packages, for SAP NetWeaver 7.0 and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here . "
Any other solution if anyone knows then please share. Points will be assigned.
Regards,
Sujit.

Hi,
The problem was with the sap gui version. I installed the trial version on my office computer and my office computer had the latest gui. The sap gui that comes with the trial version has this problem. Check if they have a new trial version now. Hope this helps you.
Regards,
Sujit.

Short Dump While creating a Value Driver Tree

Hi all,
I am trying to create a value driver tree in CPM. i am on SEM verion 3.1b. I am able to create the value driver tree but when i goto the graphical view it generates a ABAP short dump. does anybody have any idea on this

hi srini,
Elaborate it clearly .
Regards ,
Muneeh Gitta.

SRM Create Confirmation - Short Dump while adding Approver

Dear Experts.
Currently I am facing following issue.
Issue:
In SRM “Create Confirmation” Screen, when user click on check button and after that if user tries to add approver in approval tab then it is going to short dump. Please find the short dump info:
Category ABAP Programming Error
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_OS_OBJECT_NOT_FOUND
ABAP Program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Application Component SRM-EBP-WFL
I had analyzed this issue and following points are my findings.
We have written code in BBP_DOC_CHECK_BADI to check the approver is added or not in approval tab. For this purpose we are using METHOD lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info (Here lo_conf_adv is object of interface /sapsrm/if_pdo_bo_conf_adv) and the instance of lo_conf_adv is getting from METHOD /sapsrm/cl_pdo_fact_conf_adv=>get_buffered_instance By pasing Doc GUID.
As per my analysis, the above code only causing the short dump while adding the approver in aproval tab. More importantly the CHECK BADI (BBP_DOC_CHECK_BADI) is not triggered while adding the approver.
If I comment this code (which is mentioned in point 1), then the application is not giving any short dump and adding approver successfully.
I tried to find SAP notes but there are no SAP notes related to this issue. Also, I tried to find alternate METHOD to replace lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info but I have not got relevant method. Please let me know if there is any solution for this issue.
Thanks & Regards,
Sasidhar V

Hi Ritesh,
Thanks for the fast response.
We are using Process Controlled Workflow. In Doc Check BADI, we are checking the respective approver is added or not in approval tab in "Create Confirmation" Screen. While creating confirmation, when user click on "CHECK" button and If respective approver is not added then throwing error message.
We are using Method "GET_PROCESS_INFO" to get approval information only. when this method is triggered in Check BADI then it is doing respective validations and displaying messages. After that when we try to add approver then the system trying to read entry from table "/SAPSRM/D_WF_003" by passing OID to LEVEL_GUID. But there is no entry in this table and that's why it is giving short dump.
Can you please let me know why it is reading entry in that table and why entry is not exist.
FYI, If I don't use method "GET_PROCESS_INFO" in check BADI then respective code where short dump happening is not triggering (System is not trying to read entry from /SAPSRM/D_WF_003 table) and so it is not giving short dump.
Thanks & Regards,
Sasidhar V.

While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
Any ideas why? and how to get my tracks back?
I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
The 2 songs having the issue are titled Exotic Yearning and Reunion.
I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
Any thoughts and help would be greatly appreciated!
Thanks!

After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
Very Frusterated...:(

Short dump while executing few queries , which has got created on Infoset.

Hi,
We went to BI7.0 upgrade from BW3.x now.
We are getting short dump short dump while executing few queries and work book, which has got created on Infoset.
When i was executing work book where i was geting popup message saying that "Erro ZSD_XST_F00121 is invalid".When i click that message it went to dump.
I was getting this error while executing query on infoset.
We are currently SP Stack 13(Patch level 15).
I found some note 1067918 as per the shortdum,where it is saying that you need to apply SP Stack14(patch level16).
Please some one who had earlier this kind of issue.
I appreciate your answer.

Dear Krish,
Yes, It is the patch problem.
We too faced the same issue on Infosets.
Apply SP 15.
Regards,
Ram.

How to put a break point while creating a travel request in ess

Hi to all experts,
My requirement is to put a break point in the badi while creating a travel request in Ess.
The badi name is TRIP_WEB_CHECK
i tried both external and session bps
i also tried this.
break uname
break-point
and it is i check whether is triggering by throwing dump like ( divide by zero) it is triggering
how to stop it while triggering

Hi Bhanu,
Please go through these links:
How to debug abap code in update rules...routine?
debug abap routine in infopackage
Debugging of global transfer and update routine
Debugging Start/Transfer routine
And have a look at this demo video to know how to set up break points and how to debug an ABAP program in NW2004s:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cbb7716-0a01-0010-58b1-a2ddd8361ac0?prtmode=navigate
Hope it helps..
Cheers,
Habeeb

ABAP short dump error while creating an invoice

Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
Manjunath

Hi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna

Is any Userexit or BAdi or enhanc. point while create PO with reference .

Hello Experts,
Is there any Userexit or BAdI or Enhancement point while create P.O with reference .
My requirement is while creating the P.O.(ME21N) with reference, The payment terms is getting copied from the reference P.O. and become grayed out (Non editable) instead of that user want the payment terms which we have maintained in (LFB1) Vendor Master.
Please help me to resolve my problem.
Edited by: Ketanp on Mar 7, 2012 11:48 AM

Hi
Try with badi ME_PROCESS_PO_CUST
Regards
Eduardo

Making material short text grade out while creating PR

dear all
while making pr for materials,by t-code me51n, the system does not make the material short text diable/grade out.
eg if i select material from material master say material code 1000055-----& short text is --cement 53 grade.
then at the time of creating pr i can change the short text cement 53 grade to any off my choice.
logically this should not happend, as then their will not be any trace of PR in system.
pls let me know how to come out of this problems.
as we want that when ever we select the material from MM master, the system should make the short text grade out while creating the PR, so that further complication can be avoided.
thanks in adv
regards
pairkshit

hi manohar
this process does not work. beacause with this process the system disable the entire coloumn of short text in ME51N.
which is not our requirement.
the system should only grade out the material short text cell while we create the PR for material, so that one could not able to change the material short text which has come from MM master
is their any other solution for this.
regards
parikshit

Short Dunp While Creating a BP - Awarded points

Similar Messages

Maybe you are looking for