Short icons missing - in Win & for easy DMS 7.0

Hi SAP Folks
When we intalled easy DSM ver 7.0 (unicode) in Windows 7 , what we found out was the shortcut icons missing like create folder, create document .
It was possible only with right click option of mouse/keypad
When in Windows XP for the same easy DMS version 7.0 it is visible
Request to help in letting know what is missing .
Thanks
Achuthan

Hi Achuthan,
Anubhav is right. But at the moment EasyDMS 7.1 is in the ramp-up phase till march 2011. Afterwards it should be available in the SAP Service Marketplace.
Best regards,
Christoph

Similar Messages

  • Searching for Easy DMS documents using embedded search

    Dear Experts,
    we are using easy dms to manage documents. As far as I know it should be possible to index these documents using TREX.
    -it is possible to perform a search for these documents using Embedded Search an get the search results as XML (a documentation would be very helpful)?
    -how can the security be taken into account? Is there a method like AUTHORITHY_CHECK by SeS to perform security check?
    thanks a lot for your help
    kind regards
    Nicolai

    I found that authorization checks can be performed using the following authorization objects:
    -Authorization Object C_DRAW_TCD (Activities for Documents)
    -Authorization Object C_DRAW_TCS (Status Dependent Authorization)
    -Authorization Object C_DRAW_STA (Document Status)
    -Authorization Object C_DRAW_BGR (Authorization Group)
    -Authorization Object C_DRAW_DOK (Document Access)
    -Authorization Object C_DRAD_OBJ (Object Link)
    I could not find any information regarding my first question

  • TS2972 airplay icon missing on ipad for apple TV?

    My kids had been using Apple TV and their iPod and iPad were connected to it. We had a power outage a few days ago and I believe that it may have caused them to somehow lose the icon on the ipad and iPod. We cannot figure out how to get them connected again. Please help!

    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
        2.    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
        3.    Restart the Apple TV (Settings > General > Restart).
        4.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        5.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
        6.    Restart your mobile device.

  • Airplay Icon Missing in iTunes for Mac

    If I use my apple tv then try to use itunes on my mac, the blue airplay icon switches from blue to orange. If I select the blue dots next to each of my airplay devices each line item device disappears. Once they're all gone the orange icon disappears entirely and I'm left with a grey area in itunes where the airplay icon normally is. I must restart itunes to get it back. I've had this issue sporadically for a few updates of itunes but with the latest update it now seems to happen every time. Does anyone know how to fix this?
    It may be unrelated but playing internet radio stations that I've saved to playlists also makes the airplay icon disappear. I now must go to the full internet radio drop down menu to select a station to be able to play it over airplay.
    I'm using the latest itunes, OS X, and all devices are updated. I've reset SMC and PRAM.
    Thanks.

    Welcome to the Apple Community.          (5)
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Troubleshooting Security Software

  • Can I create an icon for a document in iCloud and place it in the dock for easy access?

    I would like to create an icon for a spreadsheet that is stored in iCloud.and place the icon in the dock for easy access.  This is possible with documents stored on the iMac.   Thanks

    How did you save Word documents to iCloud, Word will not do that so how did you? Did you use another application or maybe drop them in the Mobile Documents folder?
    Please explain the how, then it may be easier to answer your question.

  • Easy DMS Administration

    Hi,
    I want to administarte EasyDMS centrally
    How can I set all EasyDMS parameters (backend-system etc.) for all users, analog to SAPgui? I cannot expect Admin-Know-How of normal SAP-user.  Now I have to set each EasyDMS parameter for each user individually...
    Thanks and kind regards
    Natalya

    Natalya,
             To tell you frankly, this is one of the issues which we have a problem with in our organization as well. It means each time you configure easy dms for a user, somebody has to set up this parameters manually for each user. I think this is a draw back for easy dms.
    If at all there is a way to overcome this, you can check with the operating system guys to set up a script which will install the software and parameters associated with it when the user logs on into the network for the first time into your company network.

  • In IE I was able to raise site icons on the screen for quick site access but that facility does not seem to be available on Firefox

    When I used IE if I was on an internet site and wanted to keep the icon on my desktop for easier future reference all I had to do was
    Click File
    Click 'send to'
    Then choose 'desktop' and the icon for the site was on screen for easy access.
    I have just moved to MF
    Can I do something similar with MF?

    See [[creating a desktop shortcut to a web page]].
    You can also use an add-on such as [http://www.pikey.me.uk/mozilla/?addon=cs Create Shortcut] or [https://addons.mozilla.org/en-US/firefox/addon/66/ deskCut].

  • I am currently running OS X v10.6 SL, and am thinking about moving to OS X ML.  I have several folders on my display for easy access.  If I move to ML will I lose the folders?

    I am currently running OS X v10.6 SL, and am thinking about moving to OS X ML.  I have several folders on my display for easy access.  If I move to ML will I lose the folders?

    Do you mean that you have folders on your desktop?
    No, you should not lose those if you upgrade your OS; however, it is recommended that you do make a complete backup of all your files before doing so just in case. I'd suggest a Time Machine backup or a bootable clone so you can restore if necessary.
    FWIW, you could also store your folders in your Documents folder and drag their icons to your dock for easy access.

  • Activate search icon in easy DMS

    Dear all,
    In easy DMS, Search object ICON is not active for some SAP object like sale order, assect ,hr object but it is active for vendor, customer, wbs.
    Kindly let me how can i activate  search icon in object link tab in easy DMS
    Rgds

    Dear all
    Is it possible to activate the search icon?
    rgds

  • Object Dependancy for CHARS in Easy DMS

    Hi All
    I have given object Dependancey for some CHARS in SAP DMS.Its working fine in DMS , but when I check the same thing through Easy DMS, the dependancy is not working.. I can see all the CHARS and all Values are displayed there..
    Can someone guide on this??
    Regards
    Aby

    Dear Thomas,
    I regret but the object dependency is not working in EasyDMS currently due to a restriction in BAPI_CHARACT_GETDETAIL.
    Best regards,
    Christoph

  • List of solutions for airplay icon missing in iTunes 11 (windows)

    It seems like there are a lot of problems out there with airplay and iTunes 11.  I think it would be great if Apple or someone were to make some sort of diagnostic tool for airplay.
    I am starting this thread in an attempt to collect some of the various solutions to the airplay problems.  Hopefully, other members of the community will add other solutions that they are aware of.
    Problem: Can't find the airplay icon in iTunes 11 for windows
    1) make sure you are looking in the right place.  The icon will appear to the right of the volume slider in the normal iTunes view.  If iTunes can't find any airplay devices, this icon will not be present and the area will just be blank.
    2) For me (iTunes 11.0.5.5), I did some system work in Windows 8 64-bit, and installed AdAware, and uninstalled it.  I think this reset my firewall settings.  The airplay icon was missing from iTunes but I was able to do airplay from my iPad over the network.  I searched the start menu for "firewall", started "Windows Firewall with Advanced Security", and in the Inbound Rules list I saw that I had 5 entries that started with "Airport".  2 of them were disabled.  I double clicked on each disabled rule, and changed the action from "Block the connection" to "Allow the connection".  After hitting ok and doing this for both blocked rules, I restarted iTunes and the airplay icon appeared and everything works fine.
    3) A popular solution which has worked for me in the past has been to switch the program to miniplayer view.  There you will hopefully see an airplay icon.  Some people say you should select each of the entries in the airplay list here in order to get them to "stick."  When you switch back to normal view, the airplay icon should remain visible.
    4) I have seen someone update their dd wrt (open source based) router firmware and had the problem go away.
    5) Some have had luck unplugging their airplay device (ie: receiver) for a few minutes and then plugging it back in.
    Please add to this list if you can!

    Windows 7 64bit
    iTunes 11.1.2.32
    Apple TV (New Shape) / Airport Express 3rd Gen.
    I've had the issue of no Airplay button for the past few weeks. Strangely, it appeared randomly, but never stuck around for too long before disappearing. However, from reading this thread i uninstalled my wireless driver, and reinstalled from a generic windows search, and also installed Apple's Bonjour service (did this one after the other) and restarted my machine. All seems fine now, and the airplay button is there.
    Thank you all so much for your inputs in helping get a resolution. I hope this works for everyone else with the issue.
    Dan

  • Re:SAP easy-DMS request for recovery path-location

    Dear All,
    I have a requirement of a recovery for an origin path or a location in easy-DMS for the Document.
    Fact is that Document  was deleted by mistake, then the deletion flag was reseted, and finally path-hierarchy or location has been somehow deleted.
    Is this possible.
    Please advice how to get this done if possible.
    Regards,
    Vivek

    Hi,
    In Easy DMS if a document is marked for deletion, It cannot be recovered. Process is same as SAP DMS.
    For future course, you can have some configuraiton done in Easy DMS like "Originals deleted from EasyDMS can be moved to recycle bin by customizing easyDMS"
    Hope this helps.
    Regards,
    Deepak Kori

  • Document in Easy DMS and SAP DMS is lock cannot be accessed

    Hello Guru,
    Document in Easy DMS and SAP DMS is lock cannot be accessed. when check in Easy DMS the document 123 excel file is not accessible cannot be open, it has an icon on pencil with red circle sign.
    when check in SAP GUi, the padlock is unlock, file cannot be open as well with error (File C:\EasyDMS\SAP_400\PRE1234567890 could not be accessed.
    how can we fixed this and unlock the document excel so that we can open it. Please advise. Thanks

    Hi,
    based on your description it seems to me that this original file is currently checked out for editing. So maybe another user is
    editing this file and so you cannot access it.
    If no other user edits the file you can try to use the function 'Exit Edit mode' in the context menu of EasyDMS. This will checkin the file again and restore the last checked in version.
    Best regards,
    Christoph

  • Yoga 2 Upgrade to Windows 10 - icon missing

    I have Lenovo Yoga 2 13'' laptop running Win 8.1 I had a Win 10 icon (reserver your Win 10) and.... it disappeared 4 days ago. I tried all possible scripts and tips online, here is what I've done: All tricks fromhttp://www.askvg.com/fix-get-windows-10-upgrade-app-icon-is-missing-in-taskbar/  Nothing  I read somewhere it might be because I had Win 8 and upgraded to 8.1 I do not need to reserver, want to make sure I will update when MS releases it... Any thoughts? Any ideas? 

    hi m1979,
    Welcome to the Forums.
    Can you ensure that the KB2919355 (Windows 9.1 Update) and KB3035583  are both installed from the locations below (the latter is responsible for adding the Get Windows 10 update notification).
    If doesn't work then you can opt to go back 4 or more days ago prior to the problem using System Restore and 
    Control Panel (icon views) > Programs and Features > View installed updates
    Control Panel (icon views) > Windows Updates > View Update History
    In addition, you don't really need to reserve and you can still get Windows 10 wihout the reservation.
     From the Windows 10 Q&A:
    Can I get my free Windows 10 upgrade even if I didn’t reserve?
    Yes. The easiest way to get the free upgrade is to reserve, but you can upgrade even if you don’t reserve.
    Once Windows 10 is available, we’ll begin notifying devices that their free upgrade is available. Just open the Get Windows 10 app to schedule your upgrade. Note: Some notifications will go out as soon as Windows 10 is available; others may go out in the weeks or months following.
    Regards
     

  • Nokia Maps Icon Missing?

    Good day everyone.
    i have just bought this new Nokia Asha 303 phone and i thought the software installed in the phone is incomplete because i cant seem to find the shortcut for nokia maps. I installed the nokia suite in my pc and check  for software updates and it is up to date. I already tried factory reset, but nothing, still the same. Is it possible to restore the missing icon? thanks for any help.
    sorry for bad english

    Right after having my new phone I started exploring its possibilities testing applications from Ovi store. At some point I got some problems with an application so I decided it would be a good idea to try a reset... I first try with an app settings reset to defaults (from the s40 Configuration menu, not the Restoring Factory Defaults menu)... right after that I realized I didn't have Nokia Maps icon in any of the lists of installed applications, nor I could found any loader in both file units, phone and memory card, for it... I was not 100% sure the icon vanished after settings reset, but I supposed it, so I thought something went definitely wrong and I decided to try reset to factory defaults as I just started testing the phone so I hadn't any information saved there to lose... what I could not expect it's that a factory reset will not yield the software at the same very state as what I received short time before. In addition to not getting back the Nokia Maps icon, I noticed another difference in the system, I have an Introduction icon in the list of default applications, that triggers a video playback showing the phone basics... now when I push that button, the playback starts but only for the audio, and instead of the video I show a black screen with a NOKIA logo in the center, the same very screen I see when boot up the phone. I've seen https://betalabs.nokia.com/trials/nokia-maps-suite/bugreport/46316/nokia-map-icon-missing-after-inst... this problem is not happening only on s40 OS phones, but at least on Symbian^3 phones they had a stand alone installer to install back the app http://betalabs.nokia.com/trials/ovi-maps-for-mobile-v3-08 Something like this seems what s40 OS phone users like me are needing.

Maybe you are looking for