Short keys in the ABAP Workbench and windows short keys

Hello,
you trigger functions in the ABAP Workbench you can use short keys, ex. F8 for starting a report. But some of the short keys are already given for some window functions. So you can't use them in the ABAP workbench. Is there a possibility to assign new short keys to certain functions in the ABAP workbench or turn the windows short keys off, so that these short keys can be used for the ABAP workbench. Thanks.
Regards, Lars.

Not that I'm aware of. 
Regards
Rich Heilman

Similar Messages

  • I am trying to reinstall Windows on my macbook pro.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."

    I am trying to reinstall Windows (would not launch).  I removed the partition and started over.  I downloaded the support files and Windows 7 iso file to a USB drive.  However, when I try to run the setup.exe program I get the message "this program cannot be run in DOS mode."  I was successful before, what am I doing wrong this time?

    Try a restart.
    If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About
    General information.
    Isolating issues in Mac OS X
    Troubleshooting Permission Issues
    Step by Step to Fix Your Mac

  • Lock the ABAP Workbench in EHP installation

    I'm installing the EHP5 for ERP, and in pre-processing phase witn EHPI installer, therefore i lock the ABAP workbench
    The installation guide say this:
    The installation program asks you in this phase to confirm the lock of the ABAP Workbench on all SAP instances. This lock is needed to prevent development objects (for example, ABAP reports, table definitions, and so on) from being changed during the installation process, since these modifications would be lost.
    You can continue to use your SAP system in production operation, even if you confirm that the ABAP Workbench can be locked. However, after you have confirmed the ABAP Workbench lock, no more transports can be made into or out of the SAP system.
    The installation program waits until the time you entered as the maximum synchronization time for all the instances has expired.
    I have some questions about that.
    1. I know that I can´t do transport from development system. But can I open the client and do manual modifications?(Urg3nt corrections). WilI I lost  these modifications after downtime?
    2. After finish the pre-processing phase, the installation ask for a full backup, but also give an option:
    Go productive Again
    What's the meaning of this option???  If I select Go productive Again, can I do transports again?
    If yes, I lost the installation process? and Must I restart the installation from beggining or the installation can be resumed re-starting the ehpi installer.
    I don't have very clear f I select Go productive Again what really happen and how to do urg3nt changes while the installation is running.

    Dear Manfred, Please find the reply to your queries
    1. I know that I can´t do transport from development system. But can I open the client and do manual modifications?(Urg3nt corrections). WilI I lost these modifications after downtime?
    Answer : You will loose modifications if you perform manual modifications after locking and the changes wont be available after downtime phase.
    2. After finish the pre-processing phase, the installation ask for a full backup, but also give an option:
    Go productive Again -
    Answer : This option is provided as a backout solution - this means this is the last stage/screen from where you can return to your current system(system before upgrade) - After passing this stage/screen system can be reverted back to previous stage from SAP level.
    What's the meaning of this option??? If I select Go productive Again, can I do transports again? -
    Answer : If you select go productiive again you system will be back to normal state as you started before EHPi.
    If yes, I lost the installation process? - Installation process as in you would need to build the shadow instance again with the pramaters provided.
    and Must I restart the installation from beggining or the installation can be resumed re-starting the ehpi installer. - Answer :  I would suggest re-set the installation process and remove EHPi instalaltion directories before starting the instalaltion again.
    Hope it helps.
    Regards, Amber S | AO

  • Get an error for changing the windows authentication mode to the both SQL and windows authentication mode

    I installed the SQL server Express 2008 R2 and then SQL Server Management Studio 2008 R2 . But during the installation, I could not choose the both SQL and windows authentication mode and an error accrued so I did that just with windows authentication mode. 
    Now, I want to change the windows authentication mode account to the SQL authentication mode but it shows me an error which is you do not have permission (Although I am the administrator in windows), what can I do?
    Following steps are the steps that I went but I got an error:
    Server properties >> security >> choose the option of SQL Server and Windows Authentication mode 
    and the error that I got is attached(access is denied)  
    Can you please help me?

    You can change the setting after you gain admin rights to your SQL Server. You don't admin rights automatically, you have to explicitly add yourself during the install
    Here's a guide on how to (re)gain those rights:
    http://v-consult.be/2011/05/26/recover-sa-password-microsoft-sql-server-2008-r2/

  • Xslt program in the abap workbench

    Hi,
    could you please give me the navigation steps to create xslt program in the abap workbench ??
    Thanks in advance
    Regards
    ravindra

    Babu,
    Check this weblogs for some help on this:
    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
    /people/dirk.roeckmann/blog/2006/07/26/grouping-xml-with-xslt--from-muenchian-method-to-xslt-20
    /people/achim.bangert/blog/2005/07/17/code-generation-using-xsl-transformations
    /people/rahul.nawale2/blog/2006/11/01/dynamically-sending-a-mail-to-the-po-creator-using-xslt-abap-mapping
    ---Satish

  • IDES ABAP Workbench and access key

    Hi everyone,
    I am new to SAP, please Help.
    1. How i can use OSS ID.
    2. I installed 4.6B IDES, but ABAP - Workbench is not
       accessable.
    3. How i can get Access Key for ABAP Workbench.
    Thanks in Advance
    Shareef

    Hi,
    If you have OSS ID, you can use it to logon to service.sap.com where you have all kinds of support and help services available. That is where you use it.
    ABAP workbench will be accessible if you have authorization. I think you mean to say you are not able to create/change objects. For this you will have to register your userid as developer (again at service.sap.com) and that will give you the developer access key that you can then use.
    If you are changing any SAP object, you will need to get the corresponding key from OSS.
    If you do not have OSS logon, then you can forget about it (well, not strictly so, but that is the official 'truth'.).
    cheers,
    Ajay

  • IdeaPad Z510, changing the HDD, warranty and Windows 10

    Hello, I own a Z510 and I'd like to replace the HDD with an hybrid HDD/SSD or a pure SSD, because its 1TB disk is a real bottleneck.But what happens to the OS? How can I reinstall it, if it's stored in a separate partition of the HDD? And what about WIndows 10? Will I be able to install it? And maybe reinstall it if I have to restore the system?

    Hi Max,
    There's a couple of ways to reinstall 8.1.
    One way is to use cloning software although cloning from a platter drive to an SSD sometimes doesn't work too well, so before you do it, I would make a recovery drive.
    How to make a recovery drive  Make sure you copy the recovery partition onto this drive.
    Make a full backup of your system before you do any of this onto an external hard drive from within Recovery.
    You can also make a clean install of Windows using instructions here .  Make sure you download the EXACT version of Windows that you have installed on your machine or the imbedded key won't work.
    Your license key is imbedded in the bios and and installing the correct version will automatically detect the key and activate it.
    If I were you, I would install an SSD, the performance is much better than a hybrid drive and getting the cache to work right on the hybrid might be a little hard to do.
    Do your research, there are a lot of threads on this forum that have to do with reinstalling an OS, some ways work better than others.
    Last, I don't work for Lenovo, I'm a volunteer as well as all the other moderators.
    Regards,
    Dave 
     

  • Stylus for the Stream 7 and Windows 8.1

    Ok, honestly I'm much more of a Mac guy these days, and used iOS since it's earliest incarnations.  Got the Stream 7 due to cost and curiousity.
    What I've noticed is that with this size screen - it is almost impossible to use the desktop apps due to the extremely small size of controls, "hot points", etc.
    I've used some of the "#75 rubber eraser bludgeon" type stylii, which I've never really liked, and have been looking for some kind of stylus that has a fine tip (around 2mm).  I can find some for iOS, but first, they are app specific (even on iOS), and due to that - only work on iOS.
    So:
    1.  2mm tip, or thereabouts
    2.  capacitive - works on any capacitive screen - iOS, Android, Windows 8/10 tablets
    3.  Do NOT care about pressure levels (if feature is there, and it still works as a capacitive stylus - fine)
    4.  $50 USD or less
    I might go more than that, but ONLY if it can work with basically ANY capacitive screen. 

    Hi @tundrwd ,
    I don't think there are any passive stylus models for capacitive screens with a 2mm tip. The tip needs a larger surface area to be registered by the sensors in the screen (unless you have a touchscreen device that works with a battery-powered active stylus).
    The best solution I've found is the Adonit Jot Pro. It has a nice fine tip for detail work, but the tip is covered by a see-through plastic disk that gives it enough surface area to work. The disk swivels around on the ball point and adjusts instantly to a wide range of writing angles. It also works on every capacitive touchscreen.
    Please click the thumbs up button to say "Thanks!"
    Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
    I am an HP employee.

  • Where to see the abap stack and java stack.

    Hi..
    I have installed ECC6.0 ABAP+JAVA engine.
    I would like to know the stack level of my system. for this how i have to check. If so please mention the path how to check, Is there any R/3 level command or  O/s level command to check these stack status.
    Previously  TCODE SPAM is used to see the Support Pack level of ABAP or Basis or any other OCS packages.
    I would like to know the difference of the stack level and the support pack.
    Regards,
    Bhaskar
    Edited by: bhaskar1818 on Feb 22, 2010 11:17 PM

    You can also check Java Stack info @ the file system level at:
    /usr/sap/<instance>/j2ee/cluster/dispather or server<n> and check version.txt
    Cluster-Version: 7.00   PatchLevel 56084.450
    Build-On:Tuesday, March 10, 2009 10:37 GMT
    Perforce-Server:
    Project-Dir:JKernel/NW04S_14_REL
    JKernel Change-List:56084
    Build machine:SAPInternal
    Build java version:1.3.1_18-b01 Sun Microsystems Inc.
    SP-Number: 14
    Shows that its 7.00/SP14.
    Hope it helps.
    REgards,
    Snehal

  • What's with the itunes software and Windows? I get the quicklinks box on the side but not the store stuff. that's blank white.\

    What's with the Itunes showing quicklinks box on the WIndows operating systems and all ? What's with the store not working on windows?

    Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • When I visit FAFSA.gov im told browser is incompatible.I have the newest version and windows 7.Why do sites say browser is incompatible?

    That pretty well sums it. I am trying to fill out info for gov. aid and can not because the site does not seem to recognize that I have the newest version for windows 7 already.I also get this message on sites like yahoo.games. The site wont let me play some games due to the same.

    The FAFSA site doesn't work with Firefox 4+ versions.
    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Print and even print preview comes out unreadable. Do i need to change any internal print options. My printer works with the old firefox and windows internet explorer for the SAME document. I only have a problem printing while in firefox 4.0.

    My printouts from web pages using the previous firefox and internet explorer products work.

    There's a bug in 4.0b12, which is fixed in 4.0RC.
    Open '''Help > About Firefox''' and it should check for and install the update. If it doesn't, use the '''Check for Update''' button in that "About" dialog.

  • The Remote App and Windows 8.1

    Since... ( I believe)  I updated my windows to 8.1   my app remote on my iphone, touch and ipad  has not be able to control
    or even sometimes find my itunes library.. it will show up for a bit then totally stop working.. both my apple Tvs are good but
    my remote app just cant find and or stay connected to my library .. ????? any one have the same issues or help??

    hey apple.... you are seriously a bunch of *********!!!!!!!!!!!!!!!!!  i made the mistake of spending over 8000 on your products and now.. i have one major problem where half your devices.... apple tvs and my remote wont work... but no one nor you can fix it.....

  • HT6114 Is anyone else having problems with connecting to projectors on the OS X and windows partitions after this update?

    I am using the thunderbolt port with an adapter for hdmi connecting to a 42" RCA tv from my mid 2012 MacBook Pro 15". I have confirmed that the adapter and the hdmi cable are perfectly fine. I can only connect to a projector on the OS X 10.92 if I keep the displays separate.  As soon as I try to use the mirror feature I lose the visual feed. Sound will still go through however.
    On my Windows 7 partition the OS can't even detect it is connected to an external display.

    Hi there Chinsteig,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    -Griff W. 

  • I can't use the search function in both the Start Menu and Windows Explorer.

    This problem occurred yesterday when I uninstalled a program on my computer. Once the program was uninstalled, everything was fine until I tried to search for a file in my start menu search bar. When I attempt to search for something, nothing comes up. Not
    even a single document or piece of text. Nothing. 
    In other posts I've seen addressing the same issue that I'm having, people try to search something and a selection of files come up, like "Programs", "Documents", etc., except for me, it's all blank.
    In other threads people have suggested to delete certain subdirectories in regedit, but when I go into regedit, and navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
    folder, there is no FolderTypes folder for me to delete. It's simply not there.
    I've pretty much tried every possible resolution under the sun, apart from completely re-installing Windows 7. Please help me fix this issue, because at this point I'm
    lost.

    Yes, sometimes, we can solve this issue by editing the registry entry you mentioned above, I have a suggestion, do you have a similar system or PC which is working fine? You can export this registry entry from that PC (which i sworking fine), then
    import it to your problematic PC, please remember that incorrect change in registry will cause serious damage, so backup the registry first before editing.
    After finishing editing the registry, restart PC. If doesn't work, open control panel\Indexing Options\Advanced, rebuild the index.  
    Here're some references:
    Backup registry
    http://windows.microsoft.com/en-in/windows/back-up-registry#1TC=windows-7
    Import and Export
    http://technet.microsoft.com/en-us/library/cc755091.aspx
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for