Short video clips for the zen v plu

Are they like really short clips? Or like music video clips or longer? Thanks!!!

Creative only tend to put new firmware versions on their website. If you need the original firmware for your Zen V Plus to overcome a problem you will need to contact Customer Support.
PB

Similar Messages

Belt clip for Creative Zen Nano Plu

Do Creative sell a Belt clip for the Zen Nano Plus ? If so where and if not where else might I get one ? I think its a great MP3 player but perhaps a bit on the flimsy side when I go jogging so would prefer an extra bit of protection. I used to have a Muvo N200 which is exactly the same size as the nano plus which came with a belt clip as standard.

Try this http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=2600334793 not sure if it's used (says "sold as is") but better than my battery falling out (broken cover :angry: ) everytime I go to the gym Message Edited by pokem02 on 07-30-2006 07:34 AM

Procedure and Format for emailing a short video clip from iMovie 08

I use one of the new Panasonic HiDef AVCHD digital video cameras. iMovie 08 works great, no complaints there. From time to time I would like to email very short (5-20 second) video clips, rather than putting them up on iWeb, YouTube, etc.
There are so many "sharing" options, and I haven't had much luck with emailing these short clips. Many of the recipients are Windows users, so I'm not sure QuickTime is the answer. What is the best way to email short video clips from iMovie 08?

What is the best way to email short video clips from iMovie 08?
Assuming you and your recipients' mail clients all allow attachments up to 10 MBs, then a 20-second clip can have a combined data rate of up to 500 KB/s (4.0Mbit/s). This means you can use any share/export compressions format option available to you from within iMovie '08. Therefore, the real question becomes, what compression formats can your recipients play. Have you tried asking them to see if there is a single compression format that everyone can play? If no QT compression format is compatible everyone, then you will likely have to perform a secondary conversion to one that will be compatible. H.264/AAC would provide the smallest files for a given level of quality but require QT 7 (or similar multi-media player). MPEG4/AAC would probably be the most compatible format you can export directly from within iMovie '08. (Would have recommended Sorenson 3/IMA but data rate limitation appears to be ignored.) MPEG-1 files can probably be played by everyone but have higher data rate requirements which may restrict files to SD dimensions and require additional software to create external to iMovie '08. DivX or WMV would probably make your Windows users happy but requires Mac users to have a compatible component for viewing in the QT Player.
Try the "Export using QuickTime" Share menu option ("Movie to MPEG-4") settings:
Video
MP4 File Type
MPEG-4 Improved Compressor
Data rate in the range from 1,000 (640x480) to 3800 (near HD dimensions)
Current (or user specified) dimensions
Current Frame Rate
Key Frame every 24 frames
Audio:
AAC-LC Music
Mono
64 Kbps Data Rate
44.1 KHz Sampling Rate
Better Quality

How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
Video:
MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
Audio:
MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
Settings:
Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
Then, let me show you how to make a full use of this powerful converter.
Preparation:Download and install 4Easysoft Creative Zen Video Converter
http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
Step 1: Run this software and add video/audio files.
Step 2: Select output video format from the profile drop-down list.
Click the “Profile” button to select the output video format from the drop-down list button.
Step 3: Customize output settings.
Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
Step 4: Start conversion
Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
Tips on editing videos:
1: Capture your favorite picture.
Just click the “Snapshot” button to save your favorite image.
2: Merge videos into one file.
Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
3: Select preference
Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
4: Trim video
You can get any clip of your video and put it on your zen.
5: Crop video
You can crop your video by selecting your video mode, setting crop values, or drag the frame.
http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
Ok, just enjoy movies and music with your Creative Zen player now!
More useful tools:
MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
Edited by: user11254370 on 2009-6-9 下午11:58

Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

Can I invert a short video clip so that it is upright?

I need to turn a short video clip upright to be part of a slide show. how can i edit this clip? Please respond. Thank you!!
<Email Edited By Host>

You would need to to that with QT Player 7 with QT Pro installed. iMovie can rotate the movie also.
I've used QT Pro for a long time now and have found it to be invaluable in trimming and joining videos as well as rotating.
You can search MacUpdate.com for "video editor" or "movie editor" to see what other editing options are available.
OT

Sharing a short video clip

Please help. I have a short video clip that someone needs to see tomorrow.It is only two minutes long. I tried sending it every which way. I put it in my Idisk public folder. Did an Iweb thing. Saw it clear but it never got published. Tried to send it as an attachment, didn't work. It needs to be as clear as possible. Which way would be the best to send it so it would be the clearest?

I was able to publish it to iweb and it came out nice enough, but small as you know. I was able to make a .dv but it was too big like you said. Then in imovie i went under share and tried everyway that there was. I did install a free quicktime download which i know I already had, but I did it again and it helped. I was able to make a little .mov file and attach it to an email, but when I got up this morning and played the clip i sent to myself it said something that I did not recognize the file.................I think I may be ok just sending this little clip with an iweb page. My friend needed a clip made of a machine someone is selling and he needs to make a presentation on it today. He did next day air a DVD I made for him so hopefully he will get that on time. My friend who is a photographer and sent him a VHS of it originally and the client wanted a dvd. I burned him a DVD and then had to go back to work. My friend then said all it was was a continuous loup of some of the clips and they were all in black and white. Was a little concerned until I asked him if he hit "play" on his dvd player. I guess he never got out of dvd mode.
Oh, and I was trying to put it in my idisk shared file, but isn't that something that only someone with a mac can see? jillybean

Why is it, if i have one video clip in the timeline, i can't just add a transition at the end of that solo clip to fade to black!?! please help!

hey there, so im making a video for a family event..
i drag in an audio clip all of a sudden this becomes the be all and end all, and i want to sync some vid clips to that audio track, so let's say i drag in a 10 second video clip, at the end of the 10 seconds, i want to add a transition to fade to black.. i go to the transition window.. choose the cross dissolve or fade to colour, but it will not allow me to drag it on that video clip.. it always ends up on the audio track. this bloody application is so confusing compared to final cut. please help!

Ahhh, now I see the problem, Grasshopper. Problem is, we are all Grasshoppers, here.
Yes, that little piece of info is critical. I'd say the biggest difficulty with FCPX is the whole new language.
If I read you correctly, your Audio is in the Main Storyline (Track 1 in plain old Editorese). This makes anything else you add (above or below) a "connected clip", which we can no longer think of as "Track 2" because Jobs sez so. So, yes, you cannot just add a transition to either end of a connected clip.
No argument with Tracy's solution, because I haven't seen any other general solution presented for any attempt to treat connected clips as the main storyline. And, of course, when they were "track 1" and "track 2", you could.
An alternative solution, however, is to highlight the connected clip and press Ctrl-V to bring up the Video Animation Editor. Click the "reveal button" for Compositing: Opacity (bottom, right). Once open, there is a "fade handle" to the right top. Drag it left for however much fade you wish. (there is one on the left as well, but you were only talking about a fade-out.)
A second alternative, perhaps for future projects where everything keys on audio, may be to create a Gap clip (used to be called slug) in the primary storyline before ever dropping in the audio. Then you can add video to the main story line and modify it without having to go thru hoops to do the simplest thing.

How do I layer 2 video clips in the same time space/ playing side by side at the same time

I wish to add 2 views of the same subject side by side and playing at the same time. Is this A possible and B if so how do I add the second video clip into the same time space

aggro
What version of Premiere Elements are you using and on what computer operating system is it running?
This sounds like a split screen effect to me.
If so, one view on Video 1 and the other directly above that is the other view on Video 2.
Then crop each so that each occupies 1/2 the Edit area monitor screen.
(generalized since I do not know your program version, see effects Transform/Crop).
I wrote the following in 2011 for a Premiere Elements 8 user in another forum
Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
Video ONE on video track 1.
Video TWO on video track 2, directly above Video ONE.
Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
You may or may not need the "flip" part of the effect.
Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
Thanks.
ATR

How do you put a video clip in the corner of a picture

I have already replaced the video with the picture and detached the audio. I am trying to put the video clip in the corner of the picture.

Yeah... I have some question for the iMovie version for MacBook Pro and the iMac on the iMovie for OS X forum. I found some of my answers here:
https://discussions.apple.com/community/ilife/imovie?view=discussions
This forum here I use when I have questions for iMovie for iOS, the version of iMovie that runs on iPad/iPhone.

Arm strap for the Zen Mic

I'd like to take my Micro to the gym, but I need an arm strap because I'm afraid of bumping the unit with a weight if I were to clip it to my waist.
Could anyone recommend a good arm band/strap that will fit the player snugly? Anything specifically made for the zen micro (5gb) would be a plus.
Thanks!
p.s. I won't be able to check this board too often. If you have a suggestion and would be so kind, please e-mail me at [email][email protected]][email protected][/url]. Thanks again.

I got one of these
http://www.tunebelt.com/ab4
which is pretty good and very affordable. Good service from them as well!
As it says it was intended for ipodmini but also fits the Zen Micro.
jake

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

Does Macbook really needs adobe flash player download in order to watch video clips on the web?

Does Macbook really needs adobe flash player download in order to watch video clips on the web?

Hello Angel8C,
Your MacBook Air running Yosemite will need an updated version of the Flash Player plugin to play web content that is in the Flash format (not all video content is Flash; there is also HTML5 video, amongst others). If you are being prompted to update your Flash Player plugin, you may find the following article helpful:
Adobe Flash Player updates available for OS X on March 20, 2015 - Apple Support
Sincerely,
- Brenden

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

How can I lock video clips to the timeline?

Hello Apple discussion.
I know that holding down the command key disable ripping when triming.
But that doesn't work when deleting clips. It would be useful to lock videoclips to the timeline, so they keep their position.
Lock audio to playhead doesn't help the situation.
Thank you for your time
Attila

You cannot lock a video clip to the timeline. The program is designed so that when you delete a video clip, the other clips slide over to fill the gap. Otherwise you would have holes all over your project, or have to manually move them over. You would want to lock the audio clips to the non-deleted video clips, so that the audio slides over with them.
If you want to preserve the gap left by a deleted video clip, first insert in front of it a black clip of the same exact duration, and then delete the video clip. The black clip would hold all of the other clips in position, but leave you with a black hole to fill or delete. To make a black clip, separate two video clips on the timeline, and control-click on the empty space. In the resulting drop down menu, select Convert Empty Space to Clip. Then control-click on the black clip and in the resulting window adjust the time duration by overwriting the values in the time box and then clicking the Set button.

Tried to trim a video clip for first time iOS 6 trimming in progress last 10 hours. Not responding cant access photos. Help

Tried to trim a video clip for first time iOS 6 trimming in progress last 10 hours. Not responding cant access photos. Help

Reset your device by pressing the home button along with the sleep/wake button until you see the apple, then let go.

Short video clips for the zen v plu

Similar Messages

Maybe you are looking for