Shortclosing the PO

Dear Sir,
While shortclosing the PO
I am getting following error
" Runtime error COMPUTE_BCD_OVERFLOW has occurred"
Pl help in understanding and solution
Thanks & Regards
NJ

Hi NJ ,
Contact ur ABAPer for error analysis.
Alternative : Search any OSS notes relevant to the same based on the text stated by you.( www.service.sap.com)
Regards
Ramesh Ch

Similar Messages

  • Shortclosing the sales order

    Hi,
    we have one sales order we created one Invoice and after that we canceled that invoice.
    Now order showing open status so to close that order we put reason of rejection but still
    sales order showing open status.
    we are creating invoice with ref. to sales order
    why it showing open?
    what is the other way to close   that order?
    regards,
    Akshay
    Edited by: Akshay Dalal on Dec 3, 2009 11:46 AM

    Hi
    In VA02 you need to assign reason of rejection at header level that is ( crtl+ F10)
    That will close the document fully
    In t code OVAG if you assign values X or Y that works at item level
    suppose if your sales has 10 items each say Rs 10 and the total value is 100
    Now say reject three items in the document so the doc value has become rs 70
    In t code OVAG if blank is maintained then still the sales order value will be Rs 100
    If you take X or Y the sales order value becomes Rs 70
    And this X and Y both has a difference in reporting purpose
    So rejecting the doc at header level should solve ur issue
    Regards
    Raja

  • Short closure POs in Mass

    Dear All,
    I want to shortclose the POs against whcih are open without receipts or partial receipts for many days (say 90).
    Currently all POs are released and I can not tick the "delievry completed" option for that POs without unreleaing. Also though I ticks the "delivry completed" option after unreleaing the PO, system still allows me to make GRN against that line item.
    Requirement -
    01. Without unreleasing the PO, user should allow to tick the option "delivry completed" option.
    02. System should not allow to make GRN after the "delivery completed" is ticked.
    Regards,
    Rakesh

    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63358343a211d189410000e829fbbd/frameset.htm
    "Delivery Completed" Indicator
    The "delivery completed" indicator specifies whether the delivery for an order is considered complete. This means that no more goods receipts of the material produced are expected for this order. The order then has the status fully delivered. If the "delivery completed" indicator is set, the open order quantity becomes zero, even if the full quantity has not been delivered. You can still post goods receipts for remaining quantities, but these no longer change the status.
    The u201Cdelivery completedu201D indicator has the following effects:
    ·        The purchase order item is considered closed, even though the total quantity may not have been delivered.
    ·        Although a further delivery is not expected, it is still possible.
    ·        At the time of the next goods receipt, the system suggests the item as unselected.
    ·        The purchase order item can be deleted, even if the total quantity was not delivered.
    Although the u201Cdelivery completedu201D indicator is not set, a purchase order item is still considered closed if the full quantity has been delivered. In this case, the u201Cdelivery completedu201D indicator is not required.
    To disallow further receipts you can set last goods receipt date, you can  set PO quantity to equal GR quantity and remove overdelivery tolerances.

  • Vendormaster data changes not updated in MM scheduling agreement

    Hi,
    Can anbody tell me how to update the vendor master data changes for the exsting purchasing documents.

    My dear friend ,
    Solution 1:
    In SAP ,it is not possible. Please shortclose the p.o.and create a new P.o to reflect the  payment terms,
    Solution 2:
    Normally in all industries they will send a official letter stating the terms of payment has been amended. You will get the payment as agreed. While posting the MIRO change the payment terms and pay the vendor.
    I think this the solution you have to choose any one no other go
    G.Ganesh Kumar

  • Subcontracting Issues

    In subcontracting Cycle , we have created a scheule aggrement.We have also maintained the production version in Purcahasing info recoed for Material & vendor combination.A goods receipt has been done for the part qty agains the sheduling aggrement.Now we have done some changes in the BOM of the material.But this new BOM is not getting explored at the time of GR,Why?How the changes in BOM can be automically tracked in PO or scheduling aggrement ?(if GR for the part qty is done)
    Thnaks & regards,
    Sachin

    hi,
    You have changed the BOM today(23.04.2008)
    but the P.O date is earlier date((20.04.2008) so the BOM will not flow.
    you have to shortclose the line item and create a new line item in the same p.o and change and do the GR now the New BOM will flow.
    (OR) shortclose the old P.O and create a New P.O and do the GR ,new BOM will flow
    Please try
    G.Ganesh Kumar

  • Short closing : of PO

    Dear All ,
    I have been shortclosing the PO by :
    1) Selecting the Delivery completed tick . and
    2) And Locking the Items in PO.
    but after this whether the PO will move for again release Procedure .
    Regards ,

    Hi,
    This revoking of release strategy is depends upon your configuration logic of release strategy. If you are configured the release strategy with any change in the value of PO, then if you r deleting some line items of PO then it should go to the release revok.
    Regards,
    VB

  • Closing fully released PR without de releasing the same

    Hi ,
    In my Purchase Requisition i have set the changes after final release as cannot be changed. Also the field status key in this case FZ03.
    Now after PO creation if i have some qty as balance & open qty and the same needs to be shortclosed. With above settings the closed indicator is set as display and hence until i derelease the PR i cannot close it.
    Is there any way where with out dereleasing the PR i can closing it even if it is fully released. I do not want to delete and archive , i want to only close the PR.
    Please suggest.
    Thanks
    Sharad Singhvi

    Dear KRK,
    If i make the release idicator status to changeable in that case if any one can add further line items for cases in services which resets all level releases and hence the control is broken.
    I want a work around where the status is not changeable but i can close the PR by enabling the check box for closing the PR. If any other work around is poosible please suggest.
    Thanks
    Sharad

  • Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.

    I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes.  One would assume they are formatted properly to work on Apple equipment, yes?  Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three.  They were from the $4.99 Sci Fi collection:  Enemy Mine, Dune and Terminator 2.  Oldies but goodies.  The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films.  Any advice?

    I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
    Unbelievable.

  • Re: Column is not getting displayed in the BI report

    Hello Gurus,
    I have developed a BI report with more number of parameters.
    Case 1:
    When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
    Case 2
    I tried to put the blank column as parameter, The Program works with out displaying that column data.
    I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
    I have checked the code, Parameter description, length, Template and data definition.
    Please help.
    Thanks,
    Sreekanth

    Hi ,
    For that column did u changed any alias name in the query...
    check ur template once by loading the xml data...
    check that column form field that matches with the xml tag or not..
    Thanks,
    Ananth

  • Since I installed FF4 each time I start up internet FF doesn't open and gives the report that it cannot find the proxyserver.

    Already I have changed the settings to no proxy, but it doesn't work. Each time I want to open internet again I get the same report and I have to change the setting to no proxy again! Also I noticed that FF has changed the proxy adjustment himself to 'manual proxy configuration' where it has introduced HTTP-proxy 127.0.0.1 and port 63030 himself! How can I change this for good?! So that I don't have to change the setting each time I want to open internet.

    Thank you for this information. I am going to get rid of my  i Phone5c because of this policy of Apple!  Maybe they need sued to stop this policy!

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Using S-Video w/ the Mini DVI to Video Adapter

    I just purchased a MacBook last week and I also purchased a Mini DVI to Video adapter for it so I can use the built-in DVD player to watch movies on my TV. I have a composite to composite cable and that worked fine when I connected the cable between the Mini DVI to Video Adapter and my TV. However, when I tried to use a S-Video cable and connected that between the Mini DVI to Video Adapter and my TV; then I got no picture at all. All I saw on the TV was a picture of the MAC desktop w/o the dock and the movie or nothing else played at all.
    Is the composite connection a better connection for the MAC, or, are there some settings I need to work with on the MAC to get the S-Video connection to work?

    I managed to figure this one out, by fluke. The MacBook has to be powered on and ready for user input prior to connecting the mini DVI to video adapter with the s video already connected to it, and to the TV. Once I did it this way, it worked fine. I just thought I'd share this.

  • Refreshing the Data from a embed view in a view container

    Hi everybody
    I would like to know how can I do to refresh all data from a View with a view container the problem is:
    that I have a window that has a view at the same time this has a view container.  The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
    The question is:
    How do I force the view to refresh all the data or call again the wdDoInit() method?
    Thank you for your help

    Aida,
    Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
    1) Goto the Interface Controller of C1 and create a method there lets say doSomething
    2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
    3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
    4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
    wdThis.wdGetC1CompInterface().doSomething();
    Chintan

  • Is there a way to open two months at the same time in iCal?

    I have recurring events for every month in 2009 and want to replicate them in 2010. I do not want to just extend the stop date because there will be subtle changes to the 2010 items that I do not want changed in the 2009 versions. I would ideally like to open Jan 2009 and Jan 2010 next to each other and copy the 2009 event to the 2010 calendar (the appointment copy does not copy the recurrence info which is good). Is there a way to show either two instances of iCal running or 2 month windows?
    Thanks!

    Hi,
    If you activate iCal's Debug menu, you should find it has a 'New Calendar Window' option (Cmd-L). It is a bit of a knack to cutting and pasting correctly between windows.
    Best wishes
    John M

  • Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

    We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

    Hi;
    No, there isn't a way for you to see anything about who has saved progress.
    Thanks,
    Josh

Maybe you are looking for