Shortcut for capture 'clip'

I'm trying to setup a shuttle wheel. One of the shortcuts I'd like to use is for thr 'clip' button on the Log'n'Cap window but I can't find any reference to one?
I've found 'Log Clip', capture 'Now' and capture 'Batch' but no 'clip'?

If you have in and out points, NOW will capture a selected clip.
bogiesan

Similar Messages

Keyboard shortcut for selecting clips

I'd like to program a button or buttons on my control surface to select clips in the timeline. Are there keyboard shortcuts for selecting clips? (it's not "x")

Thanks RedTruck.
The problem with x is that it seems to mark every clip, but I think you may be on to something. Is there a keyboard command for selecting the target track? I could possibly add that command to the macro to make this work....trying to get to mouse-free editing.

Keyboard Shortcut for adding clip to queue when importing from P2 card

Does anyone know what the keyboard shortcut is for adding a clip to the queue when importing from a P2 card? Thanks!
G5 Mac OS X (10.4.8)

That would be the Log Clip button which is defaulted to F2.

Is there a shortcut for fading audio to zero and back up between two clips?

I'm trying to determine if there is a shortcut for this situation in FCP 5...
You have two audio clips butted adjacent to each other.
You want the first clip to fade down to zero (i.e. silence).
You want the second clip to fade up from zero.
So basically you have a split second of silence between the two clips.
The video equivalent would be touching black for a second between the
two clips. You can use the "Fade In Fade Out Dissolve" to do it fast.
I realize you can accomplish this audio manuvers with 4 keyframes and the pen tool. I know you can also put an audio transisions on the end of each clip. There are a bunch of ways of getting there, but is there a really
fast way like the "Fade In Fade Out Video dissolve" or a keyboard shortcut?
Thanks for any feedback.

When I need to do somethig like that I make sure there at least a 1 frame gap between the two and ad audio transitions on the end of clip 1 and the beginning of clip 2.
If someone has a faster way, i'd love to know it.

TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

Lost keyboard shortcut for render

In the last two Premire Elements 10 projects I have started, the keyboard shortcut for rendering (return) is no longer operational. In the Keyboard Customization menu, this choice is grayed out and I can't select it.
Any shortcuts for fixing this? Do I have to re-install the program? My Premire came in a package with Photoshop, and I suspect I will have to re-install Photoshop also, which I would like to avoid -seems to be asking for trouble!
Thank you
Also, the Render command does not work even when I choose it from the drop down menu. And I have a Mac running OS 10.

Is the light gray Work Area Bar along the top of the timeline over your entire project? Only clips under the Work Area Bar will be rendered.
Can you post a screen capture of your timeline to this forum?

Capture on the fly dropped frame aborted capture - clip gone forever???

I foolishly set up my Macbook pro to capture the video feed live from an HVX200 camera via firewire... THE clutch interview for a client... Lo: what happens but halfway through the interview, capture aborts and error message reads "capture aborted due to dropped frames".
It's an investigative journalism project, with a hostile interview subject, so no do-overs possible.
Clip not showing up in capture scratch or anywhere else.
My question is: has anyone had any luck rescuing an incomplete clip like this? The hard drive was churning, doing computerlike things, writing, so the information is there somewhere. It's just that the "pointers" or "handles" of the clip are gone. I know with IBM/Avid there's an attic where you can get to weird and/or incomplete files - is there anything like that with MAC/Final cut? Or is this setup "all or nothing"?
Maybe someone knows about a program that can recover incomplete data, good for MAC?
I know, shame on me for capturing straight to computer - I'll never do that again.
thanks!
Jeremy

has anyone had any luck rescuing an incomplete clip like this?
Nope. The file failed to complete...QT/FCP didn't get a chance to write the end code for the clip, so it is unusable.
I know with IBM/Avid there's an attic where you can get to weird and/or incomplete files
The ATTIC in Avid terms is the same as AUTOSAVE in FCP...it saves a backup of the project bins, not the media. Not sure about the IBM attic...
I don't know of anyone having luck recovering a file that has been aborted like this. And this happens to more people that we'd like to see. Capturing one-of-a-time events straight to computer with no backup. Bombout.
Shane

Blue screen of death, surprise restarts, and some captured clips distorted, with blocky artifacts!

Hello,
I've been using my set-up (Premiere Pro 2.0* with Cineform AspectHD) successfully for years, to capture and edit footage. But just recently, my computer has given me the blue screen of death after capturing for about 5-10 minutes or caused my computer to restart in the middle of capturing. I've also noticed that the resulting captured clips are, in some places, distorted and contain blocky artifacts. It isn't a problem with the tape because the footage plays just fine on the camera's preview monitor. I tried re-installing Premiere Pro 2.0 and Cineform AspectHD, but the problem persisted after a successful, but brief capture session (the resulting clips were still distorted and contained blocky artifacts). I have no idea what the problem is! One solution I attempted was to capture on another computer in my house, using the same software. Although I didn't get the blue screen of death or a surprise restart, the captured clips were still distorted and contained blocky artifacts in some spots. Another option I tried, with the second computer, was deselecting the Scene Detect option in the capture dialogue box. As a result, the captured clips are free of distortion and blocky artifacts, but the problem is that the captured clips are too big and very difficult to manage (I shoot a lot because I'm a filmmaker and I'm in the middle of a big project). Why is this happening?!
Any help with this problem would be greatly appreciated!
*I'd use a later version of Premiere, but I spent a lot of money on Cineform AspectHD and the version of Cineform I have only works with Premiere Pro 2.0.

I agree with John T. BSOD's are most often caused hardware issues, such as overheating of a component, or a failing, or undersized PSU.
Also, general system drivers can cause failure. Often, those are outlined (though maybe not in really adequate detail) in the Event Viewer's log. In that article, that John T. linked to, there is another link to "Finding Clues." It goes into more detail on using Event Viewer to explore warning, or error messages. If your testing of your system's components and heat, do not yield a weak link, see that one (no pun intended). It is in Reply # 3.
Good luck,
Hunt

Is there a Shortcut for "Paste Attributes? Or a way to create it? (PPro CS5)

Latest Mac OS
Premiere Pro CS.5
I have to paste diffent attributes on like a thousand clips I need a shortcut for "Past attributes". The command that you access when you right click on a clip in the timeline. In this case I am pasting Curves and RGB attributes.
Any way to do this? Pleeeease.

Select all the clips and Paste Attributes in one go or
press Ctrl+Alt+V.
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7c2ea .html

Is it possible to delete the audio of a captured clip permanently?

I know you can drag clips to the timeline without audio, or delete the audio from the timeline.
What I'm asking is: say you captured a bunch of clips with audio tracks that you didn't want, because you forgot to uncheck the audio box.
Is there some way you can delete the audio from the captured clips, without re-capturing everything? I'd like to have them sitting in my browser, without any associated audio.
I know you can change whether audio is present in a logged (but uncaptured clip) using clip settings, but that only works before the clip is captured.

Just think about this for a minute before you launch
yourself off into this realm. The audio doesn't
really take that much space. DV video runs at 3.6
MB/sec 48khz audio runs at 192kB/s. The audio takes
up nothing.
You're right - it's not worth the effort. It's just a minor annoyance. It would be easier to just recapture all the clips.

Batch List: How to capture clips inc info, from disk instead of tape

We have a client's edit log on Excel, including reel no, in/out, scene, description, log note etc. Usually we import this batch list to FCP, then batch capture from DVCAM tapes, so all clips have all their info - great.
In this case, the material is already digitised and the client has logged from DVDs burned with timecode from the digitised material being placed in FCP sequencecs with timecode generator filter.
Is there a way to 'batch capture' clips from the digitised material, so that we keep all the client logging info, as we would if we were capturing from tape?

Shane has got it right - we want to automatically build a sequence using that batch list. Or somehow have FCP make new clips or subclips from already captured footage... so if your verdict is right Shane, looks like we may have to go the manual route...
although - just occurred to me - for each clip, I could go to the digitised source sequence, duplicate it, open copy in timeline, enter clip's in and out tc in the viewer - and that will give me a copy of each clip as a sequence - rename that sequence as per the clip, and we're done.
But it's still of course more laborious than batch capture from tape; this is a concern going forward as we are switching to XDCAM EX, so of course the route to enable this client-edit-logging ( http://www.creationvideo.co.uk/info/timecode/ ) that we've always offered clients is no longer valid as the material is already online....
Any suggestions still welcome!

Captured clips are playing back at least TWICE as fast

Hey all- I am capturing HD footage from a JVC Pro HD camera - footage shot at 24P. Everything seems fine with the capture (except for the fact that there is no device control - only capture now), but when I play back the captured clips I hear the audio playing at normal speed but the video is playing back at leat at twice the speed - all actors are in FAST motion. I hear the crew and director speaking, getting ready to shoot as I watch the scene start and speed through and end right as the clip ends.
Any ideas? Is it a setting on the OUTPUT for the camera?
Thanks for any help.
Cayce

Neither Final Cut Express nor Final Cut Pro support
720p24 material. You need a product like HDVxDV to
bring it in.
Tom-
Thanks for getting back to me last night. You seem to be a master in these parts. I am new here. I am really a director and writer but through my production company I have done a number of things in FCP over the years, always without any problems. That is until the introduction of HD and 24p at which time I sort of started saying to our amazing editor "whatver you say" and clouding over with confusion. After I got your message I went and got FCP 5 from the Apple store in an attempt to keep my friend, whose short we were trying to edit, from crying. Once installed and running we had the same issue as we had in FCE HD - the video - in terms of quality - was captured perfectly, but the clips would play back at almost twice the speed that they should have. I tried virtually every easy set-up that pertained to HD and nothing worked. On a few of them I could get an actual Log and Capture window to come up but when I went to play the material via device control there was no image, althoug I could see TC running. A friend suggested that you have to take the captured HD 24p clip and bring it into the timeline and render it for it to work. Is that true? I tried it to no avail. So, he shot on JVC GY-HD 100 at 24p. I now have FCP 5 HD and am considering buying LUMIERE software that purports to streamline this very issue. Any thoughts or suggestions you may have for me would be greatly appreciated.
Thanks so much,
M Cayce Lindner

Captured Clips Not in Browser

Am having a problem capturing video. The clips exist in the Capture Scratch folder but they have never made it to the project browser window.
Running 10.4.9 in an iBook G4. Using FCE HD 3.5. Scratch Disk set to an external hd (Maxtor 120) and Easy Setup to DV-NTSC 32 kHz Firewire Basic because my video camera is a Canon ZR 45. Using DV tape---no HD. What else? Initially had a problem with camera recognition, but did the QT thing which solved that.
Capturing is a problem, yet when I played the QT clips in the Capture Scratch folder they seem OK.
Anyone have an idea about what is (isn’t) going on? Maybe these clips were never captured at all. So why are they in the folder?

G'Day Lee.
If they are on the Scratch Disc and play correctly then the capture side of things is OK.
The only thing I can think of is that you may have had more than one Sequence open at the time and the captured clips in question have been associted with the Browser Folder that was the active capture bin.
Always look for a little clapper board icon at the top left of the Browser. It's into this Folder/Bin all captures appear. If so:
Open your Seqeunce, use File>Import Files, then navigate to your Scratch Disc where the files are you wish to have in Browser, select them and hopefully it's all good.
Al

Best Method For Importing Clips Between FCP Projects

What is the best method for importing clips between FCP 7.0.3 projects? I am wondering whether or not pulling the clips from the Capture Scratch folder is the way to go or will using Import from the new FCP project create a new folder in Capture Scratch with the imported clips? I have a new HD camcorder with different clips for different projects and Log and Transfer makes it so easy to bring them all in at once but now wondering how best to separate them into separate Capture Scratch folders for each project.

well, I simply either drag them in to the new/different project from the finder, or drag or copy and paste between open fcp projects. Never had any problems working this way. Just remember that if you delete a specific project scratch disk folder, you may be deleting media used in another project.

What is the shortcut for overwrite edit when F10 won't work?

My keyboard is set to all the Apple functions and I can't use F9 or F10 for overwrite and insert edits. What is another shortcut way to do this? Can find in any manuals? Driving me nuts. I often just drag the clip but that won't work for music clip I have.
Message was edited by: Marty Roberts

Hey! That's great for you! But, it didn't work for me. I'm having the exact same issue and it's driving me nuts! I went into to Preferences and changed the Expose and Dashboard F keys and I still could not use the overwrite audio F10.
Anything else I should check? Please help.
Thanks

Shortcut for capture 'clip'

Similar Messages

Maybe you are looking for