Shortcut keys in E17 with not english layout don't work.

Hello,
I use E17 on my old dell laptop. The problem is when keyboard layout switched to not English one I can't use shortcut keys like ctrl-c, ctrl-v, etc.
I tried to configure layouts via xorg configuration, created /etc/X11/xorg.conf.d/01-keyboard-layout.conf and added xkbevd to DAEMONS. But seems E17 don't affected from xorg and I still have same behavior.
Dose anyone had same problem? Any suggestions how to fix it?
thank you

I've had a similar problem, with a need to provide
keyboard-only accessibility.
I found that users can Tab into the movie. Once they're in,
shortcut keys will work, and fields, rollovers etc can be tabbed
into. It just means you have to advise them of this in an
introduction to the project.

Similar Messages

Trying to edit a wordpress then in dreamweaver cc with mamp but things don't work out. dreamweaver can't establish connection with my server.

Trying to edit a wordpress then in dreamweaver cc with mamp but things don't work out. i've been searching through the net bt i didn't find an answer. i've followed many tutorials and did exactly the things that was asked but dreamweaver can't establish connection with my server. here's a few pics with the preferences i'm trying to establish a connection. Note that i tried it without "localhost" in the weburl. mamp is running with apache and mySql. Anyone please.

Hi Gareth,
See if the following link helps:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=174271">https://www.sdn.sap.com/irj/sdn/thread?threadID=174271</a>
Bye
Ankur

Starting on external hard drive with OSX.6.8 don't works

starting on external hard drive with OSX.6.8 don't works
On mac book with OSX.7.5 it start with my external hard drive with OSX6.8

10.6 does not support an iMac that came with a later OS X version.
see > Don't install a version of Mac OS X earlier than what came with your Mac

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

Forgotten my security questions and cannot purcahse any apps etc. solutions on internet with rescue e-mail don't work . Have been trying to resolve this issue for 3 days now

If you don't have a rescue email address (or you do but aren't the receiving the email to it) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Shortcut key Ctrl+L does not work. How to fix it?

In my Photoshop Elements 9 and Photoshop Elements 11, The shortcut key Ctrl+L for Level does not work. I press it, the Level does not show up. How may I fix it?

1. Make sure that your image is in RGB mode. Go to Image Menu>Mode>RGB.
2. Check that no two layers are selected in the layers panel.
Even then the shortcut does not work , then it that case you can always use the workaround "Enhance Menu>Adjust Lightening>Levels.

I have a Mac running 10.9.2. My wireless mouse with not scroll in mail but works fine in other applications? Any suggestions?

I have a Mac running 10.9.2. My apple wireless mouse will not scroll in Mail but works fine in other applications.
Any suggestions?

First, see this discussion. If the solution suggested there doesn't work for you, continue.
If you've installed a Mail plugin called "Mail Unread Menu" and you know how to remove it, please do that, then quit and relaunch Mail. Test. Otherwise, see below.
Back up all data.
1. Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/Bundles
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu.* A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
2. Repeat with this line:
/Library/Mail/Bundles
This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Satellite L500-13W: How to switch on Wlan with Win 7 - hotkeys don't work

Hi there,
i recently acquired this laptop, and i installed win7 64 bits prof. The first problem was that wireless card was not installed, but i go to toshib website and downloaded the new one, next to that i can't activate the card with the fn + f8 key, thats the only way to activate the card,
i already downloaded some drivers and utilities and i can't activate the card, the hotkey don't work and there's not another switch, software won't work either
Any help will be welcome
Thanks

Hallo Tito
In front of me I have Satellite L500-154. This laptop has no WLAN switch and in preinstalled Vista you can enable WLAN card using FN+F8 only. I have searched a way to enable WLAN card without FN+F8 key combination. No way.
So if you have OS without working FN+F8 key combination you will not be able to enable WLAN card.
I really don't understand why do you think it can be because of laptop.
Install supported operating system and you will see everything will be OK.
So it has nothing to do with faulty hardware.

Do not Disturb feature don't work.

The moon icon (do not disturb) in status bar disappear when I return to home screen. This feature don't work

I had the same issue. Found it out.
You need to set the device in locked mode with black screen.
Then it works.
If the screen is switched on, the device "thinks" you are doing something and can also take a call.
Try it out. Black sreen for a minute or so.

Photoshop Liquify Brush Size increase/decrease with alt+crtl drag don't work anymore...

Hi :-)
I have installed the last Update to Photoshop CS6 13.0.4...
Now I can't increase/decrease the Brush Size in the Liquify-Dialog anymore (before I installed the update, it works fine with alt+crtl and drag)...
If I press alt+crtl, the "Cancel"-Button is shown as "Revert", but the Brush resizing don't work... :-/
I use a Mac on OS X 10.6.8...
But it seems it has to do with the system... beacause at home I use 10.8.3 and there works everything fine with the 13.0.4 Update!!!

Files has been uploaded here:
http://soloporhoy.1free.ws/test/soluperguei/index.php

[BB Q10] We missed the shortcut key on BBOS with physical qwerty keyboard!

Dear Development Team,
On behalf of a lot of BBer in Vietnam and all over the world, I'd like to ask you to bring the home screen shortcuts features from BBOS to BB10.
Especially for Blackberry Q10, the more using Q10, the more we miss the shortcuts on BBOS, should we come back to BB which loaded by BBOS???
I missed the key A,K: to lock the keyboard, screen.
I missed the key P, C: to enter to phone or contact.
I missed the key U: to start calculator.
I missed the key L: to go to calendar.
I missed the key D, T: to make a memo and task.
I missed the key N: go to BBM
And I missed more and more them all while using Q10. Why don't you just bring it back on BB10?
Once again, We strongly, absolutely, definitely suggest you to bring it back on BB10 before we change our mind.
Thank for listening.
Love you.

yes. I really miss homescreen shorcuts. It's the most reason why i chose blackberry for myself. Please bring it come to us.. thank you

Easy Keys and Fn+F8 (WLAN on/off) don't work

Hello guys,
I have bought a new Toshiba Satellite A100-490 last week. I have tested all hot keys and function keys with the pre-installed Windows XP MCE. Everything worked.
But I needed a new customized installation of Windows XP Professional and Windows Server 2003 on the notebook. So I installed the XP Pro from a original CD-ROM and all Toshiba drivers, except of some special Managers (Assist, Config Free, SD Memory Format, Wireless LAN Client Manager, ...).
From the Easy Keys (Browser, Media Player, Play/Pause, Stop, Backward, Forward) only the Browser and Media Player Easy Key work. Which driver is responsible for the other Easy Keys (Play/Pause, Stop, Backward, Forward)?
The next problem is, that the Fn+F8 (WLAN switch) hot key doesn't work. But when I disable the WLAN over the hardware switch, there comes a MessageBox that I have to enable the WLAN over the hardware switch first. Normally there has to come a On-Screen-Display. What is wrong?
Please help me. Thanks!
Kaan

Hello Silas,
I have all the drivers you mentioned already installed, but nothing changed.
So I am going to install all the software and drivers again.
Please tell me, which drivers are at least required, so that every hot and easy key works.
I've put a "x" before all utilities and drivers which I have installed the last time. Did I forget to install something?
o Microsoft Updates
o Sun Java Runtime Environment
x Chipset Driver
x Display Driver
x Flash Media Driver
x Touch pad Driver
x Sound Driver
x Modem Driver
x Network Driver
x Wireless Network Driver
o Intel Client Utility
o Atheros Client Utility
o Bluetooth Stack
o Bluetooth Monitor
x Common Modules
x Hotkey Utility
x cPad/Touch pad On-Off Utility
x Utilities
x Power Management
o SD Memory Card Format
x SD Secure Module
o Assist
o ConfigFree
x Virtual Sound
o Zooming Utility
x Button Controls
o PC Diagnostic Tool
x CD/DVD Drive Acoustic Silencer
o DVD-RAM Driver Software
x WinDVD Creator
o RecordNow
o DLA
x DVD Player
o User`s Manual
Thank you for your help.
Kaan

File links with utf-8 characters don't work in windows

When I click a link like "file:///C:\символы UTF-8\path" to open in Windows File Explorer it doesn't work.
("My documents" folder opens instead).
How can such links be converted to Windows encoding, when Windows File Explorer is called?
My settings:
network.protocol-handler.expose.file = false
network.protocol-handler.external.file = true
FF 27, Windows 7
Thank you!

I spent many days customizing Firefox and am not going to start over, again.
I'm not a specialist in coding userChrome.css, am very busy with other stuff.
It's better if developers restore ALL of the changes once, than thousands of users will spend many days each.
Dixi.
Anyway, my main question is:
'''How to make Firefox send a parameter (filename) to a Windows application, encoded in Windows-1251 instead of UTF-8?
Would be very grateful.

Java script and the new and not improved firefox don't work. Please let me be able to run Java again.

I use SAP Infoview for work. To modify reports it requires a Java script to run. I had it set up in the previous version of ff to always allow from this specific site and it worked wonderfully. Now, in the new version, despite following all of the instructions from others, I cannot do my work because I cannot run Java script. I can still run it in Safari, but Safari is a last resort for me to use. I prefer Firefox and have all of my links stored there.

Some sites are not fully compatible with Firefox 4's new HTML5 rendering engine. Can you turn that off and test without it? Here are the steps:
(1) Open a new tab, then type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''html5''' and pause while the list is filtered
(3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
Then change back to the SAP tab and reload the page.
Does that make any difference?

Speakers were working with Airport, now they don't work...can someone help?

My external speakers were working nicely with Itunes and Airport for the last year and then last week, they do not work with Itunes. I think it has to do with the new itunes update. I have tried rebooting my computer and Airport Extreme with no luck. Can somebody please walk me thru the process to get my computer reconnected with my airport!?
Thank you very much in advance!

Can somebody please walk me thru the process to get my computer reconnected with my airport!?
Sure, here are the basic steps to configure the AirPort Express for iTunes streaming:
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
The other thing to take into consideration, is that the iTunes host must be able to "communicate" to the AX in order to stream to it. Anything that would "block" the path could prevent audio from reaching the speakers. I would also check your computer's firewall settings to make sure iTunes is not being blocked.

Compiled JSPs With Jasper - Now Includes don't work

I am using a template page (index.jsp) that includes other jsp pages to fill the body of the page. Previously, I had my index.jsp page as the root document and the other jsp's in a 'jsp' subfolder. To include the other jsp's, I was using hyperlinks like this:
where 'XXXX' is the name of the jsp page without the '.jsp' extension.
So, in the index.jsp page, I had the following line of code that included the jsp pages:
<%
pageContext.include("/jsp/" + include + ".jsp"); // include is the 'page' request parameter.
%>
This has worked flawlessly up to this point. However, now I want to precompile all JSP pages using Ant and Jasper as this is a distributed app and I don't want to ship jsp pages. I compiled the pages and updated the web.xml file with the new mappings. Now the index.jsp page (servlet) displays but does not include the compiled jsp pages. Will the same link to a jsp page use the servlet mappings in the web.xml file to map to the new servlet?
I also tried the following with the same result:
request.getRequestDispatcher("/jsp/" + include + ".jsp").include(request,response);
Can someone suggest a solution? How can I get the compiled jsp's (servlets) to be included and displayed in the same way they were when used as jsp pages?

Well, good news and bad news....
I got the includes to work by changing my index.jsp page to use the following:
<jsp:include page="<%=includePage%>" flush="true"/>
instead of:
pageContext.include("/jsp/" + include + ".jsp");
This seems to work.
However, this has uncovered another issue. Now none of the graphics for the page display. So I am left with a page that has broken images links all over it. Does anyone know how to get around this? All my links follow the format:
<img src="/images/...
so they should resolve to the base directory, then 'images' right? When I look at the properties for each broken image, they have the correct path... does anyone know why they wouldn't display? What do I need to do to allow the servlets to display the images properly like the jsp pages did?
Thanks in advance...

Shortcut keys in E17 with not english layout don't work.

Similar Messages

Maybe you are looking for