Shortcut now working for last word in phrase iOS8

Hello,
After updating my iPhone 5 to iOS 8, i've noticed that the spell checker and the keybord shortcuts arent working for the last word in sentence.
For instance, I used to have a shortcut, so whenever I texted LOL and hit the send button, it would send "HAHAHAHA" into the message.
Now, if i just type LOL and hit send, it will send LOL iinto conversation.
Has anyone managed to fix it out?
Thanks.

You could end up with something like the xml below, ideally binding that into the query.
SELECT SCORE(1) NIVEAU_RECHERCHE,
NO_MATRC,
NO_NOM_
FROM GR_OT_NOM_ASSJT
WHERE CONTAINS(nom, '<query>
<textquery lang="ENGLISH" grammar="CONTEXT">snowboard church
<progression>
<seq><rewrite>transform((TOKENS, "{", "}", "AND"))</rewrite></seq>
<seq><rewrite>transform((TOKENS, "{", "}", "OR"))</rewrite></seq>
<seq><rewrite>transform((TOKENS, "SYN(", ",GR_THESAURUS)", "AND"))</rewrite></seq>
<seq><rewrite>transform((TOKENS, "SYN(", ",GR_THESAURUS)", "OR"))</rewrite></seq>
<seq><rewrite>transform((TOKENS, "?{", "}", "AND"))</rewrite>/seq>
<seq><rewrite>transform((TOKENS, "?{", "}", "OR"))</rewrite>/seq>
</progression>
</textquery>
<score datatype="INTEGER" algorithm="DEFAULT"/>
</query>', 1) > 0

Similar Messages

  • After iOS8, spell check doesn't work for last word in sentence

    Hello,
    After updating my iPhone 5 to iOS 8, i've noticed that the spell checker and the keybord shortcuts arent working for the last word in sentence.
    For instance, I used to have a shortcut, so whenever I texted LOL and hit the send button, it would send "HAHAHAHA" into the message.
    Now, if i just type LOL and hit send, it will send LOL iinto conversation.
    Has anyone managed to fix it out?
    Thanks.

    Confirm this is selected:
    In the new Write window
    Options > Spell check as you type
    ''re Yes, I have dictionaries installed.''
    This implies you have more than one dictionary.
    Can you check to see if any addon /extension is causing a conflict.
    There is no point starting up in safe mode as this will disable the dictionaries. So instead:
    Tools > Add-ons
    The 'Add-ons Manager will open in a new tab
    select 'Extensions'
    Disable all add-on extensions except for one dictionary.
    Check to see if that dictionary is an up to date version.
    then select 'Dictionaries'
    This is where the default dictionary is located.
    In my case it is 'United States English Spellchecker'
    make sure this is disabled.
    The idea being to ensure that only one dictionary is enabled and that it is up to date. Then check to see if the spell check works.
    If you have other dictionaries, go through the process of enabling one dictionary, checking it is up to date and then testing the spell check.
    Please confirm which dictionaries you have installed.
    for example, I have British English Dictionary 1.19.1 and it is located under Tools > Addons > 'Extensions' and it is enabled.
    I also have under:
    Tools > Addons > 'Dictionaries'
    'United States English Spellchecker' 7.0.1 but this is disabled.
    Tell us what you have and report back on the testing.

  • Searching for a word or phrase in a file on NSS Pool/Volume

    I have encountered a strange issue in that if I search for a word or phrase in a file at any level of the volume, from the root, down to sub folders, I get different results from 2 or more PC's.
    Workstations are all Win XP SP2, Novell Client 4.91 SP4 for Windows
    Server NW 6.5 SP6 with all post SP's installed.
    I have ran a nss /PoolRebuild=POOLNAME and a NSS /VisibilityRebuild=VOLNAME
    There is only one volume on this pool.
    And I still encounter the same results.
    As one example:
    On my Admin workstation When I search the top level Folder of Closed Client folders for the word chronology, I get 2 files returned named chronfile1 and chonfile2, when I search from any other workstation (I have tried 4 different workstations at this point) at the same folder level, for the same word Chronology, I get multiple files with the Word in the File, but I do not see files chronfile1 or chronfile2. Likewise, the file names returned form the search results on the other workstations, are not returned in the search list ran on the admin (Mine) workstation. And yes, I am logged in as admin on the other workstations when running the search.
    So far, this issue is only appearing on 1 volume.
    Thoughts?

    Originally Posted by ataubman
    If you log in to the second PC as Admin, does the symptom move? IOW does it follow the user or the workstation? If the user you may have some odd file system rights set, although your specific results you report are puzzling.
    I'm assuming you are using the Windows desktop search tool?
    I ran a NSS /PoolRebuild last night which fixed an issue the workstations not being able to see the 2 files in question.
    Previous night I had just performed an NSS /PoolVerify.
    Part of the other anomoly, the other workstations seeing more files than the admin workstation (I feel so Stupid, after 25 years you think I'd be able to spot the obvious) the reason the other workstations were returning files that the Admin workstation was not - Admin workstation doesn't have Word Perfect installed.
    Somebody, give me a Gibbs head slap, now!

  • How can I make the thesaurus work for spanish words?

    I have been using pages for about 4 months now, and usually I use it in english. I am currently writing a document in spanish but I can't manage to make the thesaurus, dictionary and wikipedia work for spanish words. I really need this to find synonyms.
    Any idea what do I need to do? I don't want to change the whole pages into spanish, nor I want the spanish spell check (I know how to do that), I only need the thesaurus.

    Dear me, doesn't Español work?

  • Search is not working for MS Word documents

    Hi,
    serious help required for search operation.
    Search operation is not working for MS Word Documents.
    i noticed that, after chekin word documents its status comes as
    GENWWW.
    i already enable file format & extension for word file.
    can somebody help me in this regard.
    Thankx in advance

    Hi
    Please enable the tracing option for :
    requestaudit,indexer
    Enable Full Verbose Tracing .
    Checkin the Ms-Word document and once it fails then check the view server o/p under System Audit Information page and post the error message happening for indexing operation .
    Thanks
    Srinath

  • My phone was not worked for last two days  it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

    my phone was  not worked for last two days  it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

    We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened.  You need to provide some detail.

  • Search for "A word or phrase in the file" in .trc files gives no result

    Hi
    When i Search through Explorer using search for "A word or phrase in the file" in .trc files I get no result.
    Probably because these files are of type "Microsoft Network Monitor Document".
    But I can open them using Notepad, so why can't I search for a word in these files?
    I there another way to search?
    Normally I ofcourse use Visual Admin. but there are a lot of trace files so it would be nice to do this kind of search
    br Peter

    Hi Peter,
    This is a known problem, see http://support.microsoft.com/kb/309173
    An alternative is to use other tools which search even faster than the slow MS search does.
    Hope it helps
    Detlev

  • Alt shortcuts not working for alt-left/right or for é, í etc

    Hi guys,
    I've had this problem for a while now… Essentially, the issue lies in the alt-shortcuts for left and right where one is usualy able to 'word jump', and the creation of accented characters like é and í using the alt-e shortcut. All other alt functions appear to work fine for the moment. The alt-left/right shortcut still works when shift is held down, and highlights all the characters that have been passed over, as it should. The output for alt-e is completely blank, and the alt-left/right output is nothing, unless shift is also held.
    I have a British English MacBook Air keyboard on Mountain Lion, and I have set it to that layout, and I regularly switch between this and greek for scientific formulæ. I've fiddled around with language and input settings trying to get it to work again to no avail, and there are no shortcuts programmed to that to my knowledge. I have checked on a guest account and it seems to be account specific. Ideally I'd like to keep this account without migrating everything over - does anyone have any ideas with regards to how to track down where the problem is?
    Thanks in advance to any responses!

    If only alt + e is not working, double check system preferences/speech to make sure it has not been set as a trigger for text to speech or speech recognition or whatever.

  • Whatsapp is not work for last seen timestamp

    why dont work my whatsapp for last seen timestamp i try turn on but still not work because could not connect service please later again

    Why not ask App developer or look at their support site, since you are using their app.
    Not apple or iphone issue.

  • Scrubber bar now works for songs but no longer for podcasts

    All of a sudden, my scrubber bar does not move from the start position when listening to podcasts. I if touch it, it will restart the podcast, also, the progress bar does not move, and the time on the podcast stays at 0:00 even if it is playing. Regular fast forward and rewind work fine, and the scrubber bar functions normally when playing songs.

    This only happens with podcasts you downloaded directly to your phone and then synced on itunes, right?
    Here's what I posted elsewhere...
    This has been a problem for me for awhile, getting the --:-- on the scrubber bar, not being able to forward through the podcast. And not just on iphone 4. It happens on my Ipad and happened on my old iphone --so its not a IOS 4 problem exclusively.
    Anyway, _I have figured out a rather convoluted solution to this problem_. Bear with me, it's going to seem silly and excessive.
    So... when you sync your phone/ipad to your itunes, 1st thing to do is "transfer all your purchases" (if you dont know how to do this, control-mouse click on the iphone/ipad icon when it pops up in itunes)
    This will transfer all the podcasts that you had downloaded directly to your phone back to itunes.
    Then (and you only have to do this once) make sure "sync podcasts" is checked off under the PODCASTS tab -- the tab related to your phone, not the PODCAST tab for the stuff on your Itunes desktop/laptop.
    Then comes the really silly part. You have to manually click on any of the podcasts you want to go back to your phone. The ones you directly had downloaded on your phone and the ones you downloaded through itunes.
    They will sync back to your phone and work fine, scrubber bar works now, the time is correct, it lets you fast forward etc...
    I have a bunch of podcasts but probably not as many as most so its not that annoying for me to have to manually click on the ones i want back on the phone the right way. I'm sure this solution probably is too silly for those who have tons of podcasts and dont want to have to reclick on every one just because they hooked up to itunes. But it is a solution of sorts.
    I"m hoping Apple will fix this little glitch at some point but until then this is what I came up with. Interested to hear if anyone has a simpler solution or if this works for other people too. Thanks.

  • TS4268 what apple write here is now work for me. If anyone know how to activate imessage on iPhone 5 ios 7.1.1 please kindly share how?

    Since i upgarde my iPhone 5 to the latest ios 7.1.1, it doesn't work on iMessage. I've tried to follow the instruction posted by Apple but it still not work for me. It appear " iMessage unsuccessful activation" after i waiting for activation for a while. If anyone know how to get it successful please kindly share, HOW ?

    I should also add: There's no pending downloads in the iTunes store on my device or App store. There are some pending downloads linked to my account, but they have been there for quite a while and have never been a problem before. Additionally, if these apps WERE the issue, I figure they would've begun to download on my device after I succesfully typed my password in.

  • Substitution now working for reversal documents

    Hi,
    I understand that substitution does not work for reversal documents; all attributes in the reversal document are picked up from the original document.
    However is there any way to change this? I want the reversal document to pick up something else. Please note that the attributes fields are all Z fields.
    Thanks & Regards
    Rajesh

    hi Rajesh,
    pls. check the conditions of the substitution, may be reversing is not included.
    ec

  • CTRL-ENTER works for single word site (google) but not for two-word sites (news.google)

    After typing (google) in the address bar on Firefox 7, hitting CTRL-ENTER prefixes (http://www.) and suffixes (.com) to it, but the same does not work for (news.google).
    Same problem with (mail.yahoo) as well; (yahoo) by itself works fine

    See these two related bug reports:
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=688395 bug 688395] - CTRL+Enter does not append .com after getting a server not found error
    *[https://bugzilla.mozilla.org/show_bug.cgi?id=673528 bug 673528] - using Shift to bypass "switch to tab" doesn't work anymore (loads www.domain.com.net)
    ''(please do not comment in bug reports)''

  • Safari 1.3.2 shortcut not working for blank tabs - normal?

    Just got my powerbook back from Apple with an "updated" OS X.3.9 and Safari 1.3.2. Trying things out before I zero the drive and reinstall everything back the way I had it (OS x.3.8 and Safari 1.2)
    Trouble is the keyboard shortcut for cycling through tabs seems to be broken. I used to use CMD-SHIFT-Arrow Key to move left or right through tabs. Now it won't work except on tabs that already have pages loaded. If I land on a blank tab (like one of the dozen I open in advance as habit) it just dies and then I have to use the trackpad to select a new tab.
    So, is that a new "feature" of Safari 1.3.2 or is mine broken? I don't like it.

    Thanks for the info, Tom.
    I must admit great disappointment at this "improvement". CMD-Tab-Arrows worked 100% of the time in version 1.2. Now in 1.3.2 it doesn't.
    For me, it makes infinitely more sense to leave my fingers on the arrows to cycle tabs because I'm already using them alone and with other modifier keys for scrolling up and down and left and right anyway. I'm less likely to mistake the arrows for other keys (remember I'm using a highly compact keyboard).
    You're right this weird bracket key [ ] shortcut works even in blank tabs. However, it's definitely 1 strike against keeping the OS and Safari at the "updated" versions. Sigh.

  • Safari shortcuts dont work for navigating through open tabs

    I read that Control-Tab or Control-Shift-Tab are shortcuts that navigate left and right through open windows in Safari.
    I also ready that CMD-Shift-left arrow navigates to the left.  But only moves once, and if you select same with right arrow, nothing happens.
    Under Settings Application shortcuts, there are no setting setup for CMD-Shift-left arrow so I guess that this is 'built in'?
    I would like to navigate using keyboard shortcuts left and right through open tabs in Safari.  Please can you advise as I am stuck with the above and they dont help me....
    Thank you.

    Thanks! The shortcut can be set like this in AI, although all key combinations I would want to use are not allowed. Too bad. But anyways, thank you very much for the tip!
    cmd+~ is not an option for me, I guess, since the swiss/german keyboard layout has no dedicated tilde key.
    So, I have a working shortcut in PS (ctrl+tab / of which I still don't know how to change, if possible at all) and thanks to you, I can now set one in AI as well. Unfortunately, I can not set it to be identical as in PS, since the "cmd" key needs to be included in AI's shortcut assignment dialogue, but I guess, this is as good as it gets.

Maybe you are looking for