Shortcut to switch between Normal and Preview

What would the shortcut be to toggle easily between normal and preview views?
Thanks,
Luca

"w". Making sure, of course, that you don't have the text tool active.

Similar Messages

  • When I switch between "normal" and fullscreen in a youtube video, the video and audio stops for a half second. Any solution?

    It is only present in firefox. Did reinstall whole windows 7 also, still have the problem :(

    Hello,
    This could be related to the graphics card taking some time to display the flash video. Can you please check and confirm if you are seeing this issue when you use the HTML5 player of YouTube. To do that, you can do the following
    #visit the [http://www.youtube.com/html5 HTML5 page of YouTube]
    #Select the 'Request HTML5 Player' option
    #Try viewing the video and see if the issue is happening
    #You can switch back to the flash based player by revisiting the page and selecting 'Use the default player'
    Please try that and let us know if the issue is recurring or not.
    Thank you

  • Shortcut to switch from Normal - Silent and revers...

    I have today obtained a Nokia N95-3 850 Mobile 
    On performing the above I am still unable to switch between Normal and Silent by pressing and holding the # key.
    Is there anything I am not doing.
    Regards
    Allen

    adiy2k wrote:
    No UK branded firmware supports that feature, it's only generic firmware that does.
    Not quite right as the feature can be found on many UK branded models.  As said earlier it's rare to get that feature on orange because they reserve that key for their almost dead line 2 service.  Other UK networks often do support that key for profile switching.  T mobile, voda, O2, 3 and virgin all do normally support that feature in their branded firmwares.
    Over the past year or two there has been a repeated problems worldwide that can effect branded and generic phones where that key doesn't switch profiles.  Unfortunately when it happens there is no way to resolve the problem other than using 3rd party software that lets you assign functions to key presses.

  • Normal and Preview toggle?

    Is there a keyboard toggle between (View/Screen mode) Normal and Preview
    screen modes?
    Dan

    -- although you can redefine it to just about anything you want, to prevent 'w's appearing all over your texts. Look at the bottom of the Edit menu, there's an extensive Keyboard Shortcuts option.

  • HT1343 how do I switch between windows in the same programme?  I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

    how do I switch between windows in the same programme?  I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.  For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
    Please help!

    Command and ~ keys to tab between open windows.
    Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key.  Tilda ~ is shifted, and Grave Accent ` is not.
    Command-Grave Accent

  • I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

    I have a mac book pro with Windows for Mac, I have really been struggling to figure out a keyboard shortcut to switch between 2 excel files can someone suggest a solution please ?

    someonehelpmaddy wrote:
    My Mac knows that it is connected to the montior...
    Open your Displays system preferences.  Is there an Arrangement tab and does it show two screens?  If no Arrangement tab then your mac does not know it has two screens.  Maybe smc and pram reset will shake it free and maybe not.  Maybe there's something wrong with the connection.  Thunderbolt plugs are similar to mini-displayport plugs so make sure the plug is pushed firmly in so that essentially all the metal part disappears inside the socket.  The plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
    If you do see two screens in the Arrangement tab then click Detect Displays and Gather Windows to get the Displays preferences of the other monitor on to your main monitor.  Check the resolution and if there is a refresh rate check that as well.

  • Shortcut to switch between states?

    Hey there gurus,
    Simple one for you.
    Fireworks CS4. Mac OS 10.5.2.
    Is there a shortcut to switch between states?
    Thanks in advance.
    Tom

    Hey Tom,
    Glad to see you found your way to the keyboard shortcuts area. Here are a couple notes that might keep your Fireworks experience happy:
    •Try to keep your Fireworks files small... Don't have too many pages when you are going to be using a lot of states; I know it is tempting to have the entire project in one file... separating the different sections by pages and the different states of the sections by the states, but it will be worth your while to keep these files smaller and have multiple files in place of multiple pages. This will do wonders for helping the app remain consistent.
    •If you do choose to use multiple smaller files in place of large ones, use 'Command + `' (1 key left of 1/! key). This will let you flip through open pages. If you want to go in reverse, add shift (Command+Shift+`).
    •Try using the terminal command 'purge' if/when things get slow, this coupled with the aforementioned smaller files has helped me avoid crashes.
    •Make some custom tool panel layouts and save them in Window > Workspace Layouts > Save Current. If you want to update a workspace layout, just type the name of the layout you wish to save over.
    Best wishes and good luck with the clients!

  • Keyboard shortcut to switch between Song/Album/Artist

    Is there a keyboard shortcut for switching between Song/Album/Artist/Composer etc. view in the top right corner of iTunes? If there's not, then consider this a feature request!

    Not exactly, but down-arrow will swap the images, and 'z' will always zoom the "select" one, if the "Link Focus" padlock is unlocked. Is that close enough for your needs?
    Hal

  • Keyboard shortcut for toggling between belgian and russian keyboards ?

    I want to switch between "belgian" and "russian" keyboards by a keyboard shortcut while using a text editor (NeoOffice, Pages, ...). How can I do that: macro, applescript, ... ?
    Message was edited by: jjeener

    The standard shortcut is Apple/Command + space.  If that doesn't work you may need to disable it being used already by Spotlight.  You can set any shortcut you want in system prefs/keyboard/keyboard/shortcuts

  • Keyboard shortcut for switching between orthogonal views?

    I know that F10, F11, F12 toggle between the custom views, but is there a shortcut or a way to create the shortcut for switching between the different orthogonal views?  What's the easiest way to switch between top and left views?
    Thank you for your time and help!
    Best,
    Laz

    Nope. One of the downsides of AE not having a proper 3D environemnt...
    Mylenium

  • When I set black point on windows, the image switches between blank and full image, why?

    when I set black point using windows, the image switches between blank and full image, why?

    I set black point with alt button down while I move sllider. When black
    dots show, I stop and back off a bit.  That's the normal result. Normally a
    white screen appears until I release the alt key. In my case, sometimes the
    screen goes from white to full image. It's not all the time. I view my
    power and ram use as I work and it doesn't spike when this happens.  It's
    as if the alt key command is not holding.  I've used both alt keys with
    same results.
    Thanks for responding.  I hope you have some ideas.

  • ADSL keeps switching between 'fast' and 'interleav...

    Hello
    I wonder if you could tell me if there is some reason why my line profile / ADSL latency keeps being switched between 'fast' and 'interleaved'. Everytime it is switched from interleaved to 'fast' I lose download speed. It has just changed again today and as a result my download speed has (according to my BT Home Hub Manager) dropped from 6.3MB (yesterday) to 3.2MB (now). Is it possible to have the line profile left as 'interleaved' so that I can enjoy the extra download speed ?
    Thanks for your help.
    Fortinbras
    Solved!
    Go to Solution.

    Hi
    I am sorry to see you are having problems with your BT Service
    I suggest you contact the forum mods they should be able to get interleaving turned on  for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • How to switch between primary and secondary input ...

    Hey guys ,
    I have Nokia 6700 Slide
    I have to write SMS's in two languages so I need to switch between secondary and primary input language put the way I know is boring and inefficient so that if anybody know a shortcut that help to switch between the primary and the secondary input language that will be awesome  .
    thanks

      when writing text ,To change the
    writing language, select Options >
    Input options > Writing language
    or refer to page 28
    http://www.google.ie/url?sa=t&source=web&cd=2&ved=0CB8QFjAB&url=http%3A%2F%2Fnds1.nokia.com%2Ffiles%...
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • 7344 servo motion switching between open and closed loop operation

    I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
    In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
    I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
    I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
    Bob

    Jochen,
    Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
    My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
    Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
    Bob

  • When frequently switching between mobile and desktop view

    When I frequently switching between mobile and desktop view I have to open the layers every time since they get closed/collapsed. Adobe may need to fix it for the next version.

    You can use CTRL+# to switch between Code and Design View.
    By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
    And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

Maybe you are looking for