Shortcuts for resize/feather adjusment brush do not work

Good morning,
I've got a Mac and I just installed Lightroom CC. I've tried to use the sortcuts you specify in your help guides: https://helpx.adobe.com/lightroom/help/keyboard-shortcuts.html#keys_for_working_in_the_dev elop_module
I know it should be simple: [ or ] to change the size and Shift + [ or Shift + ] to change the feathering :-(
I can't make it work. I have an Spanish (Spain) layout keyboard and I thought that it was the problem. I changed its layout to a US layout but I couldn't make it work either.
I don't know if you could help me out with this or if there's a way to define new shortcuts to make it work.
Thank you very much in advance

Hi thank you for the answer,
can you be a little more specific? How can I solve this?
I have not understand this:
The brush tool will only work when there's a brush present in the brushes panel ("Basic" doesn't count as a brush)

Similar Messages

Pcmanfm alt+arrow shortcuts for "back" and "cd ../" not working

A recent update must have stopped this from working for me. In previous versions, alt+up arrow caused me to go up a directory level, and alt+left arrow caused me to go back to whatever directory I had previously been in. Now alt only causes lines to appear underneath the menu items (as to show what alt+letter combo would open the menu).
Is this occurring on anyone else's pcmanfm?
pcmanfm-mod-nohal has the correct alt+arrow key functionality... so not sure where the breakage is coming from.

2ManyDogs wrote:I'm sorry no one has answered your posts, but it's probably because no one has any good ideas for you. I have pcmanfm running on two Arch machines and I don't have this problem with either one of them.
Thanks for the suggestions. Responses below
2ManyDogs wrote:1. Did you do anything or install anything right before this problem started (you mentioned an update -- do you remember anything particular that was updated at that time)?
Unfortunately not. My recollection is that pcmanfm was updated, but who knows what else might have come along with it?
2ManyDogs wrote:2. What window manager are you using? Have you tried installing a different window manager to see if the problem persists? On my machine pcmanfm works fine in spectrwm but the keyboard shortcuts do not work at all in cwm.
I'm using Openbox. I could try another DE/WM, but would prefer not to. I may just to check.
2ManyDogs wrote:3. Have you tried a different file manager? If you are unable to fix this problem, could you live with thunar or spacefm instead of pcmanfm?
I really don't like spacefm's left side navigation behavior. Clicking over there just takes you to the folder, but you can't up/down arrow to navigate the tree, at least that I've figured out.
2ManyDogs wrote:4. Have you tried removing and reinstalling pcmanfm?
Inherently, yes, as I've tried other fm's, I've uninstalled it. I could try removing it and any configs though. On that note, I just installed pcmanfm in a virtualbox installation of Arch that I've barely touched so far on my work Windows machine. It should have minimal configs set up. I get the same behavior.
2ManyDogs wrote:5. Are you using systemd? Did you start using systemd around the same time as the problem started?
I'm not familiar with this. It's installed, but from my perusing of the Arch Wiki, it looks like I'd have to activate it somehow. I have not added systemd to my init line of grub or syslinux.
2ManyDogs wrote:6. Are you using any keyboard-trapping utilities, such as xbindkeys?
Don't think so. I don't have xbindkeys installed. I checked my rc.conf for openbox to see if I had anything. The closest was Ctrl+Alt+Up to switch to the last workspace, but commenting that out and re-loading openbox did not fix the issue.
2ManyDogs wrote:7. You mention that the problem went away for a while -- what did you do right before it went away, and right before it came back?
Don't recall this either. I should have taken better notes! My memory vaguely recalls something having to do with numlock, but that's not doing anything anymore.
2ManyDogs wrote:8. You say "pcmanfm-mod-nohal has the correct alt+arrow key functionality" -- this is probably significant, but I'm not exactly sure how.
Yup -- mod-nohal works. Thanks for reminding me of this, as I'll probably just switch to it for now. I don't know if there was a reason I didn't just stick with that. Perhaps anal retentiveness at wanting to know the source of the issue.

Shortcut for downloads window in Safari does not work

Hi everybody,
My shortcut for downloads window in Safari (command-option-L) does not work anymore, when i press that combination of buttons, iTunes appears in my screen.
Can i do something to bring back my shortcut?
Santiago

Ok...
Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Now launch Safari. Try the keyboard shortcut for the Downloads window. If it didn't help, just move that .plist file back to the Preferences folder.
Also, go to your Safari menu bar click Safari/Reset Safari. Select the top 7 buttons, click Reset. Restart your Mac. That might help too.

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Brushes are not working for lightnening

My brushes do not work, for lightening. I restet them and did control alt shift already.

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Brush function not working correctly PS Elements 11 for Mac

The brush is not working correctly in that I cannot drag the brush. It allows only spot healing, not dragging the brush. Didn't use to have this problem. Now do. Not sure what has changed. Thank you!

Is this happening after upgrading to Yosemite?
If yes, please see:
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
Thanks,
Anwesha

The lightroom 4 brush is not working

I installed lightroom 4 trial program. But, the brush is not working. The brush only can make a dot but can't move the dot and change anything. Could you tell me how to fix the problem?
Cheers,
Tony

Hi Keith,
Thank you for helping me. I do not know how to adjust the brush parameters to zero. I tell you what I have tried again but the brush is not moving.
Select DevelopClick DoneClick BrushClick ResetIn effect, click Restore Default PresetsIn Show Edit Pins, choose AlwaysTicket the show select mask overlayChoose brush AAdjust size to 0.1 feather to 0, flow to 1. The brush was not moving. It only had a dot on the picture.Then, adjust size to 5.7, feather to 31, flow to 3. The brush was not moving, too.I am sorry. I really need your help again.
Thanks a lot,
Tony
Date: Mon, 20 May 2013 07:47:19 -0700
From: [email protected]
To: [email protected]
Subject: The lightroom 4 brush is not working
    Re: The lightroom 4 brush is not working
    created by Keith_Reeder in Photoshop Lightroom - View the full discussion
That sounds like it is working, Tony - remember that once you've painted where you want the effect of the brush to apply, you need to adjust the brush parameters, which all start off zeroed.
If you want to see where you've applied the brush, press the (letter) "O".
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5336211#5336211
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5336211#5336211
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5336211#5336211. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

CS5 - Mixer Brush - Wetness not working properly

Hi,
I'm using the trial version of Photoshop CS5 Extended.
I'm very excited about the new Bristle Brushes and the Mixer Brush. I think, a nice job was done on these features. However, I think the "wetness" attribute of the Mixer brush is not working as it is intended. I would expect that low setting of wetness would cause the brush to interact less with the underlying color. At the moment, when set to 0% wetness, the Mixer Brush does not interact at all with the underlying color but at 1% wetness it fully interacts with the canvas. There is no perceivable difference between 1%, 50% or 100% wetness. I think this should be fixed in order to enable the full power of the Mixer Brush.
Apart from that, the new brushes are just awesome. It is the most haptic and expressive brush engine I've ever used.
Thanks,
DanieL

This seems to be a problem with the Bristle Brushes only and is quite annoying considering that the Bristle Brushes are practically made for the Mixer Brush. Other brushes seem to use the Wetness slider just fine. Here's an example:
I hope Adobe fixes this in a patch.

The brush do not work sometimes without a reason.

Sometime without a reason (I mean I cant find one) the brush do not work (it appears the symbol when you are not able to use a tool), to solve the problem I copy and paste everything on a new document, but it is very messy, what am I doing wrong?
Thanks for the help!

Hi thank you for the answer,
can you be a little more specific? How can I solve this?
I have not understand this:
The brush tool will only work when there's a brush present in the brushes panel ("Basic" doesn't count as a brush)

I've been using the speaker feature for dictation. Suddenly it's not working. Any ideas?

I've been using the speaker feature for dictation. Suddenly it's not working. Any ideas?

Please follow this article:
http://support.apple.com/kb/TS1567
it should help
let me know

HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense.

Resize photos option in Preview not working

I use Preview to resize my photos depending on where I'm posting or sending to. Since I've downloaded Yosemite I will resize photo and it's not working. I have my photos in iCloud drive & am working between an iMac and a iMac Pro. I'm trying to resize to send out to have printed vs. at home printing. This problem has only happened since upgrading to Yosemite. Any suggestions would be helpful.

Resizing works fine here.
Best practice is:
Open image in Preview
Tools > Adjust size; enter the new values and click OK
Press the option button then File Save As give it a new name and save to desktop

We have 2 versions of Portuguese in our application. The problem is only for Brazilian Portuguese and the other one is working just fine. Locale for portugese-brazil (pt-BR) is not working

We have 2 versions of Portuguese in our application. The problem is only for Brazilian Portuguese and the other one is working just fine.
Locale for portugese-brazil (pt-BR) is not working.

No. Something else is going on.
Your son may be hogging all the bandwidth but your wireless network should never simply disappear. Moreover, if your son isn't doing anything the available bandwidth for other devices should remain unaffected.
I suspect that something is miswired, and from what you describe I suspect that link is between the Extreme and the "other computer".
The way to accomplish what you propose is
Modem > Ethernet cable to Extreme's WAN port
Extreme's LAN ports > wired Ethernet devices.
There should be nothing but an Ethernet cable linking an Extreme LAN port and any other wired device. If you run out of available LAN ports on the Extreme, you need to by an "Ethernet switch" - they are not expensive, but don't call it a "splitter" or you will only confuse yourself. The switch would be connected to one of the Extreme's LAN ports, and you would connect additional devices to it. You can also use one of your Expresses for that purpose, assuming it is the current generation model with two Ethernet ports.

Brush tool not working as it should.

Hi i am trying to use the brush tool but it is stuck as a cross and it will not go to a circle when you try to resize it, i know i am doing something wrong but can not work it out ,could someone tell me where i am doing wrong please.
Many Thanks Bruce.

Thank you very much Barbara for your advice that is it working fine again .It is so frustraiting when you get stuck with something and do not know how to fix it
i am enjoying elements but it is a big learning curve lots to take in but rewarding when you achieve something, many thanks again . Bruce

Local Adjustment Brush does not work in Windows 7, 64-bit

All other tools and functions work OK. My issue is just with the Adjustment Brush; The Adjustment Panel opens when the brush is selected and the brush moves, but none of the adjustments are applied to the image. The problem is clearly related to the new operating system. This was just confirmed, by removing the hard drive with the Windows 7, 64-bit OS, and inserting an old hard drive with Windows Vista, 32-bit installed. The adjustment brush works fine with the old OS and the same version of PS.
My normal monitor resolution is 1920 x 1200 with a DPI of 151; however, this DPI is not compatible with PS, so I reset it to 149 evey time I use PS. Lower screen resolutions and DPI settings don't resolve the problem. I mention this only because of a previous cursor problem that was resolved by changing the DPI.
I'm using CS4 with Camera Raw version 5.6. Version 5.5 also does not work.
Can anyone offer suggestions?

Problem solved. One of the recent upgrades to Camera Raw reset the flow rate to zero, which I did not notice until after posting the message.
Sorry for the error.

Shortcuts for resize/feather adjusment brush do not work

Similar Messages

Maybe you are looking for