Shortdump in monitor after upgrade to BI 7.0

Hi guru's,
We just went through the technical upgrade to BI 7.0 . However we are still using RSA1OLD at the moment.
We are having an issue with the monitor. While checking failed loads, whenever we go from the details tab to the header tab, we get a shortdump.
In ST22 it tells me to look for notes with the following key words :
"MESSAGE_TYPE_X" " "
"SAPLRSSM_LOAD" or "LRSSM_LOADU14"
"RSSM_RSLDTDONE_READ"
But I wasn't able to find any related note.
Did anybody else encountered the same issue before ?
Thanks for your help !

Hello SB,
Did you check the available OLAP cache?  By default it is set to 4.0 MB, which is not sufficient. You can change that. Also, check the persistence method for the same.
May I reqeust you to kindly share the documentation you have for this upgrade?
We are planning the upgrade from 3.5 to 7.0 few weeks.
Would really appreciate your help.
Thanks & Best Regards,
Pramod.

Similar Messages

  • Problems with my second monitor after upgrading to Mountain Lion

    Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
    Have anyone experienced the same problem?!

    Hello Carlo!
    Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
    Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

  • Issue with multi-monitor after upgrading to Mavericks

    I ran Mountain Lion OS on my MacBook Pro along with VMWare Fusion 5 with an extra monitor and everything was working fine till I upgraded to Mavericks. Since then, I am not able to see the 2nd monitor in the Extended Mode.
    on Apple, everything is work and I see two monitors and can move one window from one display to another but when I open my Windows in Fusion, only one display is accessible (the 2nd display showing Apple screen, which wasn't the case before). Even I can see that the color settings I had done before for my additional monitor is not in place after upgrade.
    I have checked my WIndows and settings are fine as it was before. It's Windows 7 Pro. I read some articles that I have to upgrade to Fusion 6 and some others that mentioned this is an issue with Mavericks and upgrade won't fix it. So, I am looking for some advice or similar experince, if any.
    Thx in advance for your help.
    Behzad

    Update: I can see that Windows act as it is two displays but the 2nd display is in nowhere and I cannot see it. I mean the window can go out of my normal display (i.e. my laptop) but not to the other monitor. That's why I have to disconnect the 2nd monitor and only use laptop display.

  • Low Resolution on External Monitor after upgrade to Snow Leopard

    I recently had my Macbook Pro 13in upgraded to run OS X 10.6.3. Subsequently I have been unable to use my external BenQ G2420HD external monitor at it's full resolution. I'm using a MiniDisplayPort to VGA (D-Sub) adaptor. I have the latest firmware for the adaptor.
    With OS X 10.5 on the 13in it was OK. Also with my old Macbook Pro 15 in (also 10.5 and a VGA adaptor). These allow the full operating resolution of 1920x1080.
    Now the maximum I can get is 1360 x 768.
    Be grateful for any help.
    Paul

    I'm a bit concerned it's been 2 days and I have not received any responses to this question! Does anyone from Apple monitor this list and can give some indication of how to solve the problem?
    Best
    Paul

  • Dual monitors after upgrade to windows 10?

    I just upgraded to Windows 10 on an Envy 700-414.  My dual screens worked beautifully on Windows 8.1, but now my second monitor is not recognized.  This is not even a little bit OK.  How do I fix it?

     
    Hi DebiPGupta, 
    Welcome to Sony Community! 
    Disabling the ISB Utility from the System Configuration is part of the resolution for Widows 8 and 8.1 regarding battery issue. I'm happy that it worked on your Windows 10 machine. Sony will release the drivers and software for Windows 10 soon. Please check this page for further information: http://esupport.sony.com/US/p/os10upgrade.pl 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • No signal on LED TV monitor after upgrading to 10.6.4

    I purchased a new mac mini with OSX 10.6.3 yesterday and connected it up to my Samsung LED TV. Everything seemed to work fine. I got a message saying that upgrades were available (I assume to 10.6.4). I selected yes and then left the computer to install the upgrade. When I returned there was a blank screen on the TV with a message saying "Check Signal Cable". I have rebooted numerous times but I still do not get any signal. Can someone help?

    Figured out that there is a brief window before the apple logo where the keyboard worked (by inserting a disc and trying to eject it). Insert my snow leopard disc and pressed c like a madman. The installation screen came up the mouse worked like a charm. Now I'm restoring from a time machine backup and in 5 hour or more I should have a functioning MacBook again!

  • Are there suggestion to stop my monitor from being fuzzy after upgrading to Maverick?

    Are there any suggests to help with my fuzzy monitor after upgrading to Maverick?

    Apple computers: Troubleshooting issues with video on internal or external displays

  • External monitor issues after upgrade to Mountain Lion

    MacBook Pro 5,4, upgraded to Mountain Lion 10.8.5 when installing replacement SSD. Trying to connect to Vizio VMM26F tv/monitor in dual monitor display. In the past, under Lion, this monitor worked flawlessly with MiniDisplay to DVI adpater/cable. (In addition, a second MBP 5,3 with Mountain Lion worked flawlessly in this setup.)
    Today, after upgrade, I plugged the monitor in as usual. It is simply not detected using the DVI adapter/cable. I had a VGA cable and adapter, so switched to that. Image appears on monitor. But about once per minute the monitor disconnects -- Vizio goes black, MBP goes blue, then the images reappear after a variable delay. Sometimes Vizio shows "No Signal" message, other times not.
    This monitor is no longer manufactured, but its web site does not show any driver/firmware downloads.
    No firmware updates show in software update for the MBP.
    Any suggestions for making this monitor reliable?

    I don't know if this will 'fix' your problem, but have you tried the 10.8.5 Supplemental Update -> http://support.apple.com/kb/DL1686?
    Clinton

  • Spiceworks Network Monitor not working after upgrading to version 1.2

    It's the same with my upgrade. Look like we need some oil and vinegar for the  pepper ;)

    Hello,
    I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
    The above issue persists whatever restarting the services or rebooting the computer hosting this service.
    I also noticed that the size of this release is 682KB which is obviously small compare to old version:
    Anyone else experiences the same issue?
    Thanks
    This topic first appeared in the Spiceworks Community

  • Lose interfaces from MRTG monitor system after upgrade.

    After upgrade C7609S routers from:
    c7600rsp72043-adventerprisek9-mz.122-33.SRD4.bin
    to
    c7600rsp72043-adventerprisek9-mz.150-1.S3a.bin
    I lose interface with ip mpls configure form the MRTG SNMP pooling system. cfgmakre not see any more that interfaces (intrefaces fall on ($if_ok) filter). Other interface which not have a ip mpls configured is normally visible in the our MRTG monitoring system.
    From my site it is looks like that interface when I configure ip mpls go to unknown state for MRTG. That interfaces are not any more ethernet type.
    I can reach interface with configure ip mpls only with manual configure *.cfg file with  ifindex value.
    If you now how to fix that problem pleas let me know.
    Best regards,
    Primoz

    Im not a Mac person and dont really know if this will fix it but try re-setting the work area and see if it then sticks.
    Show screen shots if you can.
    Maybe another Mac user can help.
    Glenn

  • Unable to see views Active Alerts, Discovered Inventory, Distributed Applicatios, Task Status, Unix/Linux Computers, Windows Computer under Monitoring workspace after upgrading to UR6

    Hi All,
    Recently I upgraded SCOM 2012 SP1 CU5 to CU6 and facing following issue:
    1. New menu item got grayed out that appears upon the right click on Monitoring node(root) under monitoring workspace.
    2.  When we click Monitoring in the navigation pane, the Monitoring Overview opens, which displays a summary of health states and alerts. if we click any of the numbers in the overview, it is supposed to open a state view of the selected category but
    this function does not work now.
    3. Views like Active Alerts, Discovered Inventory, Distributed Applications, Task Status, Unix/Linux Computers and Windows Computer do not appear under Monitoring workspace after upgrading to UR6.
    Has anyone out there facing such kind of issue? Any help on fixing these issues would be appreciating.  Thanks in advance.

    Hi,
    Have you re-opened the operation manager console?
    There are some known issues when intalling UR6, please go through it:
    http://support.microsoft.com/kb/2929885
    In addition, there is CU7 for SCOM sp1, why not installing the newest one:
    http://support.microsoft.com/kb/2965420
    Regards,
    Yan Li
    Regards, Yan Li

  • Server Monitor after 10.5.7 Upgrade - No Blower Info

    Hi All,
    After upgrading from 10.5.4 to 10.5.7 I no longer see any fan speed readouts under the blower section of Server Monitor. In fact, the only thing I see listed is "None" repeated in different areas of the section.
    Any thoughts? (Running on a G5 XServe Cluster Node.)
    -Mike

    Good point. I often find it useful to completely power the unit off and then back on again after an upgrade.

  • After upgrade to Mavericks, i can´t choose wich is the primary monitor

    I use 2 monitors, one in hdmi and the 2 in MDP. After upgrade OS, the 2 monitor is the primary, and i can´t choose wich is the primary monitor and the dock dont display on all monitor, like the announced.
    Someone know how can i fix this?
    That was the worst OS X update I've ever seen...

    First of all, IMHO, you do not need A/V software on a Mac running OS X. Most of that stuff will cause problems. There are NO documented viruses that affect a Mac running OS X. There is an occasional malware report, but that usually is a result of visiting odd sites.
    Use the MacAfee uninstaller and forget Avast. If you mean the MacAfee icon on the dock, just drag it off.
    Barry

  • External monitor not recognized after upgrading to win 10

    After upgrading to Windows 10, my external Samsung monitor isn't recognized.  Not sure if I need new drivers from HP or Samsung (they say they don't have anything for me, of course). 

    Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on:            2nd generation Intel(R) Core(TM) i3 processor            2nd generation Intel(R) Core(TM) i5 processor            2nd generation Intel(R) Core(TM) i5 vPro(TM) processor            2nd generation Intel(R) Core(TM) i7 processor            2nd generation Intel(R) Core(TM) i7 vPro(TM) processor            Intel(R) Pentium(R) Processor  900/B900/G600/G800 Series            Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

  • 2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

    Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment.  In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

Maybe you are looking for

  • How to add a input field for personal ID in My Account - Personal Data

    Hi, I am new for B2C shop development. Now I have to add a ID number in Personal Data of My Account in B2C shop. This field is in the assignmemnt block of Identification Number, but it seems not easy to add this field in B2C shop JSP page. Gurus, wou

  • To Those With Bigfoot Network NICs Having iTunes Store Problems...

    The new NIC drivers are out from Bigfoot Networks and they fix the issue.   Go here to download them.  Make sure you choose the correct NIC card and whether you are running a 32bit or 64bit operating system. http://www.bigfootnetworks.com/support/ind

  • Delimited output problem

    Hi , When i am generating reports in delimited format using with matrix stayle design .at the time of writing data into text file i am getting following error. RWRUN60.exe -Application Error The instruction at "0x78002b42"referenced memory at "0x0000

  • Move row values to columns

    Hi all, i have a a table that looks like this: ID NAME ADDR 01 SAM USA 02 JIM USA 03 BEN USA 03 BEN ENG 04 TIM ENG 05 MEG USA 05 MEG JAP 05 MEG ENG i need it so that names BEN and MEG do not have separate records for every ADDR they have. every ADDR

  • Web services & XML files

    I am trying to develop a web services with XFIRE and Tomcat, this web services will use an XML file to store some data, I have integrate this file in the web services project, but when I invoke the service, I get an exception that the file don not ex