Should an imageCLASS MF6160dw Multifunction Machine NOT be turned off EVERY Day?

I understand that turning off my machine would save some electricity. But, I am more interested in increasing the life of the machine then in saving a few cents of electricity.I do live in an area where the cost of electricity is pretty low. My previous Multifunction Machine was a Brother brand & they suggested that turning the machine off every night & then on the next morning would DECREASE the life of the "Lamp" - which is a very expensive part to replace (if it can be replaced at all). I tried searching for NUMEROUS words / phrases in the online Manual - but could not find where / if this topic was addressed. If someone has a link to something in that online manual or to any other source, I would appreciate it. THANKS in advance for your assistance.

In a roaming network, you would want the router directly connected to the Internet to have both NAT & DHCP enabled ... even if you want its wireless disabled. All other routers downstream of this router should be in bridge mode (NAT & DHCP disabled). If you haven't seen it already, you may want to use this Apple Support article as a reference.

Similar Messages

IPod Touch shake to shuflle not completely turned off

*The Problem:*
On my 8GB iPod Touch, there seems to be shuffle bug, which occurs with both OS 3.1.3 and iOS 4.0.
Shake to shuffle seems to often shuffle, even when Shake-to-Shuffle is turned off in "Settings".
*The way the manual says it should work:*
When I let a playlist (or album) play to completion, and keep the Touch completely still, then after it goes to sleep (in 1 minute), I can hit the Home button once to wake up the music player (but not unlock the Touch), then double-click Home to get the music player controls on-screen, and finally hit the Play icon to restart the same playlist (or album) which had last played.
*The way it actually works:*
However, even with Shake-to-Shuffle turned Off in Settings, if the iPod is shaken for a few seconds after it goes to sleep, then most of the time (but not always) when I hit the Home button once to wake up the music player (without unlocking), then double-click Home to get the music player controls, and finally hit the Play icon, then some random album will generally (but not always) be played.
If I then put the Touch to sleep, hold it perfectly still, hit the Home button once to wake it up, then double-click Home to get the music player controls, and then hit the Play icon, the original playlist will begin as expected.
*Apparent problem:*
It seems that when the Touch is asleep, it erroneously picks up motion, and then thinks it should shuffle (even though Shake-to-Shuffle is turned Off) when the Home button is used to restore the music player controls, (while the Touch is otherwise still asleep and is not being unlocked).
I've tested two different 8GB Touch units, and they both exhibit the same problem, wherein the last played playlist (or album) is not being played after shaking the Touch while it is asleep.
*Any Suggestions or Solutions?*
Has anybody else seen this problem? Or know a solution?
Thanks...

1. Check settings > Music > Shake to shuffle ON
2. If IPOD is locked, double click home button. When the controls appear, shake rapidly.
3. If not locked, you should be in the music app.

Iphone can not be turn off

My Iphone can not be turn off, and I need to restart it.
It is stuck in the white screen with the black apple in the central area.
Help , advise?
iPhone 5s

Thank you so much! IT helped!!!!
Thank you, thank you, thank you.
Now my phone is Ok Again
BEst Regards!

Some apps "use cellular data" will not remain turned off

some apps "use cellular data" will not remain turned off
No matter how often I go to settings>cellular and turn off the apps, as soon as I close that screen they automatically turn back on.
I prefer not to delete the apps and reload them as I will loose the data in them when they are removed.
Thanks for the help.

First thing and easiest thing to try is a device reset:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

While doing the most recent firmware upgrade, my iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
Here is an article from the apple support website on setting the ipod to disk mode.
http://docs.info.apple.com/article.html?artnum=93651
If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
http://depot.info.apple.com/ipod

HT5622 my iphone 4 is froze on a page and wont do anything not even turn off...what can i do to get it off

my phone is froze on a page and wont do anything, not even turn off ... what can i do

a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

MacBook PRO 3,1 17", 2.4 Ghz NOT CHARGING - TURNS OFF WITHOUTH AC ADAPTER

Hello, please help me!!
Yesterday my 17", 2.4 GHz Core 2 Duo MacBook PRO 3,1 just started to be in NOT CHARGING MODE..
I don't know where is the problem.
About i half year ago, i have bought a new battery for this machine and it worked until today great. The battery capacity and also time of use was very good…about 2-3 hours of work - or longer if i didn't work so much on this machine.
Yesterday evening i started the MacBook PRO without AC cable plugged in and during the startup session the screen lights off, and also the machine completely turned off. I thought it is a battery remaining capacity problem at 0%, so i plugged in the AC adapter to charge again the battery. But the indicator on the cable still lights green (vexer orange again as one day before) and the battery status is showing NOT CHARGING. If I unplug now the AC adapter the computer turn immediately off. So i loose all my data and everything not saved.
I was looking to system profiler to find the problem in the battery, or to see where should be the trouble. But there it looks like it is s all OK. Using the coconutBattery 2.7 I see this:
Current charge: 3391 mAh
Maximum charge: 6446 mAh
at 52%
Curent capacity: 6646 mAh
Design capacity: 6800 mAh
at 94%
Age of mac: 45 Months
Battery loadcycles: 107
Battery temperature: 30.0° C
Battery power usage: 593.4 Watt
I tired to fix the CMU with releasing battery - holding 5 sec power and so on..
Also tried to repair permissions if there is some possible error - it only writes this one not repairable file:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Do you know where should be the problem? Is is the hardware or software problem?
How to FIX this error? I cant ow use this machine for my work on the go, which is for me very important.
If it is the HW problem what type of arrow it should be? Macbook is in grate condition. Last year there was an Graphic Card error, so i gave it to Apple center and they fixed it with the Apple Care program for this machine…
Its possible the battery is dead? Should i visit the Apple store to try another battery or the MacBook has serious problem in HW on motherboard?
Thank you in advance for help and any possible solutions.
Down there i attached the profiler info for more detailed profile:
Battery Information:
Model Information:
Manufacturer: PS
Device name: CL5189
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0000
Hardware Revision: 0000
Cell Revision: 0000
Charge Information:
Charge remaining (mAh): 2757
Fully charged: No
Charging: No
Full charge capacity (mAh): 6446
Health Information:
Cycle count: 107
Condition: Normal
Battery Installed: Yes
Amperage (mA): 23
Voltage (mV): 11388
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x0027b3f8
Charging: No

Hello, please help me!!
Yesterday my 17", 2.4 GHz Core 2 Duo MacBook PRO 3,1 just started to be in NOT CHARGING MODE..
I don't know where is the problem.
About i half year ago, i have bought a new battery for this machine and it worked until today great. The battery capacity and also time of use was very good…about 2-3 hours of work - or longer if i didn't work so much on this machine.
Yesterday evening i started the MacBook PRO without AC cable plugged in and during the startup session the screen lights off, and also the machine completely turned off. I thought it is a battery remaining capacity problem at 0%, so i plugged in the AC adapter to charge again the battery. But the indicator on the cable still lights green (vexer orange again as one day before) and the battery status is showing NOT CHARGING. If I unplug now the AC adapter the computer turn immediately off. So i loose all my data and everything not saved.
I was looking to system profiler to find the problem in the battery, or to see where should be the trouble. But there it looks like it is s all OK. Using the coconutBattery 2.7 I see this:
Current charge: 3391 mAh
Maximum charge: 6446 mAh
at 52%
Curent capacity: 6646 mAh
Design capacity: 6800 mAh
at 94%
Age of mac: 45 Months
Battery loadcycles: 107
Battery temperature: 30.0° C
Battery power usage: 593.4 Watt
I tired to fix the CMU with releasing battery - holding 5 sec power and so on..
Also tried to repair permissions if there is some possible error - it only writes this one not repairable file:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Do you know where should be the problem? Is is the hardware or software problem?
How to FIX this error? I cant ow use this machine for my work on the go, which is for me very important.
If it is the HW problem what type of arrow it should be? Macbook is in grate condition. Last year there was an Graphic Card error, so i gave it to Apple center and they fixed it with the Apple Care program for this machine…
Its possible the battery is dead? Should i visit the Apple store to try another battery or the MacBook has serious problem in HW on motherboard?
Thank you in advance for help and any possible solutions.
Down there i attached the profiler info for more detailed profile:
Battery Information:
Model Information:
Manufacturer: PS
Device name: CL5189
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0000
Hardware Revision: 0000
Cell Revision: 0000
Charge Information:
Charge remaining (mAh): 2757
Fully charged: No
Charging: No
Full charge capacity (mAh): 6446
Health Information:
Cycle count: 107
Condition: Normal
Battery Installed: Yes
Amperage (mA): 23
Voltage (mV): 11388
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x0027b3f8
Charging: No

Time Machine Backs Up 30-39G every day ??? Using too much Space on the TC

I installed the TC about 2 weeks ago. The first backup went as plan and took all night. But the problem (I think) is that incremental backups take place during the day but every day at the end of the day the TM does a 30 to 39G backup and is using up all the space on the TC. I am sure I am not adding 30 something G every day. Can someone tell me how to setup the TM to not use all the space. I got the TC 500G 2 weeks ago and is down to 219G of free space. I think that is not right.
Please help
Thanks

That should do it. Time Machine will backup an active VM each hour if there are changes (i.e. VM is running). That amounts to 2GB+ per hour depending on the size of your VM.
To recovery that space, you need to delete the file (and all versions) from the backup. Open Finder and go to your VM folder. Click on the Time Machine icon on the Dock. Click on that file and click the Gears button. You will be given the option of +Delete All Backups of -----+. All instances of this file will be delete from TM.
To backup your VM, occasionally drag and drop the VM folder to a folder on your backup drive. TM will not touch this.
For Fusion user, go to settings and set up a shared folder outside of the VM. Fusion will then access and save to this folder. Corruption of the VM will not affect these documents. As well, TM will back up this folder as long as you have not excluded it.
Good luck!

My iPod Touch will not completely turn off or connect to iTunes

I disconnected my iPod and did what you are supposed to do to turn it off. The little thing that circles round and round before it turns off all the way will not stop. It won't turn off no matter what I do. iTunes says it cannot connect to my iPhone (it is an iPod Touch) and that there is some kind of error. I went through all of the troubleshooter steps including uninstalling and reinstalling iTunes. What should I do? Will it fix itself when the battery finally dies?

- Have you tried resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Placing the iPod in recovery mode and then restoring the iPod via iTunes? For recovery mode see:
iPhone and iPod touch: Unable to update or restore
For the future. saying:
"I went through all of the troubleshooter steps"
Really provides us with no information since we do not know what steps you are referring to.

Can not disable, turn off, mute or remove Apple boot start up chime using Yosemite 10.10.1

I understand why Apple forces the boot chime upon us for marketing and diagnostics, but I really want to disable the start up chime when booting my MacBook Pro laptop.
I have tried the sudo commands that worked in Mavericks.
nvram SystemAudioVolume=%80
and
nvram SystemAudioVolume=%00
They do not work with Yosemite.
I have also tried muting my laptop before shutting down and muting the sound entirely in System Preferences. This method does not work either.
Every time I boot the laptop I have to annoy every one in the library, or the cafe, or the airport, or the workplace.
Anyone have a solution for this?

Same here. I've been wanting to disable this since very long time ago, and started actively looking for it when I bought my first macbookpro (rmbp13) last year. You won't get any answers because there isn't a solution.
We get it, this is for diagnostics. But with most laptops being non-serviceable these days, it doesn't make sense to push boot up chime for everyone. It's really annoying when my coworker boots up her machine, and this has been going on since as back as I can remember.
With 10.10.1, I have to often times force power-off my rMBP13 late-2013 model, and I'm the one making that obtrusive boot noise. Why can't Apple just make a preference check box as an option in system preference? I'll praise you guys and call it Magical.
Apple, please make an option to disable the boot chime noise!

IPhone 4s mobile data does not stay turned off.

I have an iPhone 4s running iOS 7.1.2. When I go into the mobile settings and turn off the mobile data on my applications that I don't want to use my mobile data for, when I exit out of the settings and go back in, they have been turned back on. I've tried a hard reset and doing a reset and then putting the back up back on the phone and none of it seems to help. Its already cost me an additional $40 on my last phone bill because the settings didn't stay off and my songs auto downloaded even though I had the settings turned off.
If there is a fix other than having to reset and not use my backup I would love that, as nothing else I seem to try works.

Clean the iPhone charging port with a clean dry toothbrush.
If still problem, iPhone 4S has full Warranty, make Genius Reservation and take iPhone to Apple for resolution.

IOS 5.0.1 Notification Center not actually turned off, draining battery

Before iOS 5 upgrade, I deleted Trapster after use, and I would not receive any more alert.
After iOS 5 upgrade, I experienced crazy battery drainage. I turned off the diagnosis and usage, and chose Do Not Send. Not helpful to save battery life.
After iOS 5.0.1 upgrade, battery drainage has been varied between 8% to 15% per hour, even worse!
I found a few problems:
1. After using Trapster, and deleted it from memory, while the notification was set as OFF, though alert was set to Banner in the Notification Center, the Alerts still appear when Locked on. I changed the Alert from Banner to None, but without reset the iPhone, later in the day, Trapster still gave me a few banners alert, though it was not in the memory.
2. Sometimes my iPhone 4S has hot rim while no app in memory and in sleep mode, charging or non-charging. I ran System Activity Monitor app and found that 45%-65% CPU resources are being used. For no intervention at all, it will drop back to 2% to 5% after a few minutes and the battery dropped 5%- 15% within that period.
3. After taking photos with the Camera while Options HDR is ON, even though the Camera app was deleted, the iPhone 4S remains hot or even getting hotter. (Sometimes I could get the same result when tests were repeated but not always.)
I have 10 apps set ON at Notification Center, but Trapster is one of the 37 apps Not in Notification Center.
I am thinking that the Location Services (as in Camera) and Notification Center are not actually able to turn off, even though you may have actually turned them off.
I have 2 iPhone 4S. This is about the one upgraded from iPhone 3GS.
Another iPhone 4S, which upgraded from iPod 2G, has no battery drainage problem from day one.

Since I upgraded to iOS 5.0.1 I have a problem with the camera (no zoom). The iOS 5 has got many problems it appears.

My ipad is locked up and will not even turn off. Message says, "This Ipad hasn't been backed up in two weeks. Backups happen with this Ipad is plugged in, locked, and connected to Wi-Fi. Ipad is charged and on WiFi and is totally locked up

My Ipad is totally locked up and will not turn off. What is the problemo?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

My iPhone 4 turns off randomly not completely turn off

Pls help my iPhone 4 turns off randomly

Clean iPhone charging port with clean dry toothbrush. See if better. If not and there is warranty or AppleCare make Genius reservation and take to Apple for resolution. If no Coverage, clean again with toothbrush and some Isopropyll Alcohol. See if better. If not you may need charging port assembly and/or battery replacement.

I lost all of my notes after turning off notes

I accidentally turned off notes for one of my email accounts and lost all the notes, but when I turned notes back on the notes did not come back. I changed the default notes thing too if that matters at all.

If you backup with iTunes and you restored from the backup and the notes were gone, then there is no where to retrieve them from unless you have another backup that contains those notes.
Launch iTunes on the computer and go to iTunes>Preferences>Devices. You will see a window with all of your backups listed in it.
If you see a recent backup that you are certain contains the notes that you need, recover deleted notes from iPhone backup.
I think the suggestions might be of use to you.

Should an imageCLASS MF6160dw Multifunction Machine NOT be turned off EVERY Day?

Similar Messages

Maybe you are looking for