Should an iphone software update really take 3 hours?
should an iphone software update really take 3 hours?
It depends on a number of variables. It could be the speed of your internet connection, if you are trying to update OTA versus direct connection in iTunes, the amount of data, music and apps that need to be synced back to the device after the update. You can always remove the device from iTunes and perform a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The device may have completed the update and just not displaying correctly. If you do remove and it is not updated, just connect again and start the update again.
Similar Messages
-
My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?
Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
Don't use wi-fi wireless for Mountain Lion recovery. -
When trying to Sync my iPhone i got a message saying that my phone could not be read and that it should be restored, upon doing so i got another message saying the iPhone software update server could not be contacted what do i do?
I have now discovered that i cannot update or restore any of my devicesWere those items purchased or downloaded under a different apple ID than what you are logged into on the phone?
-
my iphone 3GS in recovery mode! what should i do if a statement like "the iphone software update server could not be contacted" appear?
Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.) -
I went to update to the new ios and my phone immediately went into recovery mode. I called apple and they said I had to restore my iphone 5. I did what they told me to do through iTunes on my macbook and now the box that says Contacting the IPhone software update server has been there for 4 hours with no progress.
It can not do that all by itself.
When you plugged it in, iTunes said 'Oh goody! You got a new phone! Would you like to make it just like your old phone?'...
You explicitly said 'Yes'.
You can't undo that.
No backup of the current state of the new phone was made. It was wiped and the last backup of your old phone was restored to it.
Anything you had on the new phone is gone. -
Firmware 3.1 update sitting at "Updating iPhone Software" for about an hour
I am running on 10.6 OS X, iTunes 9, my phone backed up successfully, but it's sitting at the Updating iPhone Software for nearly an hour now. It is at around 75% on that step and looks like its only 10% on the phone itself.
Here is a list of actions logged in the consols
9/9/09 4:51:41 PM [0x0-0x81081].com.apple.iTunes[1138] Child process initialized.
9/9/09 5:08:39 PM [0x0-0x81081].com.apple.iTunes[1138] Child process initialized.
9/9/09 5:08:39 PM AppleMobileBackup[1413] BackupAgent starting up...
9/9/09 5:08:39 PM [0x0-0x81081].com.apple.iTunes[1138] 2009-09-09 17:08:39.116 AppleMobileBackup[1413:903] BackupAgent starting up...
9/9/09 5:21:36 PM [0x0-0x81081].com.apple.iTunes[1138] Child with pid 1413 exited normally
9/9/09 5:26:31 PM [0x0-0x81081].com.apple.iTunes[1138] iTunes: Read failed
Anyone care to offer up some info on this? I'm a little worried about that last one on the list.... -
I downloaded the os 6 by wifi and when the phone restarted it told me to plug into itunes. I did that and the iphone software update has been stuck on '70 hours remaining' for the last 3 hours. Help!
it says " itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes" so i restore it and after it gets finished it says " the iphone :iphone" could not be restored. the device cannot be found" but ive used this itunes since i got this phone.
-
ITunes: "The iPhone software update server could not be contacted"
Could someone please help me with a problem that I´m having with iTunes that´s really annoying. I want to update my iPhone 3G with the latest 3.0 software. For the first time ever iTunes is giving me the following message every time I try to update (been for more than 24 hours now):
+The iPhone software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later.+
I also get a message if I try to click on the update itunes( not that I need to, as it updated to iTunes 8.2 earlier this month) but still I figure it´s all part of the same problem:
+The iTunes update server could not be contacted. Please check your Internet connection, or try again later.+
Solutions tried so far:
* Going through my internet connection settings - I´m connected to the internet with no problems!
* Changing from wifi to wired connection - same thing, can´t update
* Reinstalling itunes (twice) - no difference
* Switching off Netbarrier
I don´t know what else I can do. I´m beginning to think it may be related to either iTunes being updated to 8.2 or one of the many recent software updates apple has been sending us of Mac OS. My computer is got all recent updates.
Please help!Thanks for the response. Yeah I'd seen that a lot of these issues in the past had mainly affected Windows users. Anyway I tried naming a new location and no success and I don´t really understand the last post in that thread. There is no "check for updates" under the help menu. It's only in the itunes menu and that´s what I keep trying to do with the same message.
Anyway it's clear to me now that it's not a local connection issue nor an iPhone server issue. I've since upgraded to the 3.0 software via a Windows PC without any problems and without having to sync all the music and stuff which is a relief. Afterwards, when I put it back into my Mac all it asked me to do was a backup and nothing else had been synced (or wiped) so the immediate problem is out of the way. It's just this remaining issue now that iTunes still won´t connect to update servers although it does connects to the itunes store all ok. Any other ideas before I call Apple on Monday? -
Ok I’m completely lost here....
I’m running Microsoft Windows XP Home Edition Service Pack 3 (Build 2600), I updated iTunes to 11.0.2.25 and some other updates for windows last night on my laptop. I try connecting to download the iOS 6.1.2 update for my iPhone 4 and my iPhone 5 via iTunes. I am getting this message for both "iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connection is active and try again." Everything was fine with connecting prior to running these updates because I downloaded the 6.1 update with no problems when it came out.
What I have done so far with which has made no difference:
Checked my internet connection
Changed my internet connection
Signed out of iTunes and then signed back in
Ran diagnostics via iTunes, comes back with: Network interfaces verified- Internet connection failed- Secure link to iTunes store verified
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-02-20 20:40:48.
Disabled firewall, spy sweeper, virus scanner
start>run>cmd> typed "netsh winsock reset"
Rebooted
Checked the parental controls in iTunes
Start>control panel>internet options>connections tab> lan settings> selected the "automatically detect settings"
Deleted iTunes and reinstalled iTunes
When I would "ping gs.apple.com" it would come back with "request timed out" no matter what internet connection I was on, so I went into the hosts file start>my computer>(C:)>WINDOWS>system32>drivers>ect>HOSTS and added "# 127.0.0.1 gs.apple.com". Now it will ping gs.apple.com just fine but still comes up with the "iTunes could not contact the iPhone software update server because you are not connected to the internet" message in iTunes when i try to download the update.
If anyone can come up with any ideas that I haven’t tried, please let me know. This is keeping me back from updating both of my phones along with if anything should ever happen to them; restores as well.im computer is connected i can go to the apple store through itunes but when i plug my phone in i keep getting that alert... i plugged my phone in to update it after the apple loaded the itunes icon and a usb showed up.
-
The iphone software update server could not be contacted" - error message recieved when i try to update to 5.1.1 via itunes , what can i do ?
Dear Lawrence Finch:
If you're still around I hope you see this message, as you're the FIRST person (after reading every link, thread, other sites, apple support articles, etc.) to mention JB may be causing this iTunes popup window to REPEATEDLY occur:
"The iPhone software update server could not be contacted."
No, I did not hack anything (are you kidding? Grannies don't hack!), but I unknowingly bought a 3Gs iOS 3.1 from ebay that was not advertised as JB. Since it is like brand new, I was going to keep it (because my old backup is iOS 3.1.2) & was trying to simply restore & update, which (I thought) would remove the JB (that's what everybody says at forums, etc).
Instead, after "erasing all settings/content" (inside phone's Settings to get the prior person's name out of there), it is now stuck in White Apple Mode.
Put it in DFU/Recovery Mode & connect to iTunes but that stupid above message keeps appearing & I have already read/tried EVERYTHING to get rid of that message, starting with:
1. OLD phones (3Gs) with OLD iOS 3.1+ should work FINE with OLD Mac (iBook) with OLD OSX (Tiger 10.4.11) with OLD iTunes (9.2.1[5]). So that can't be the problem.
Here's all the other things apple & others say to check which I already checked:
2. USB ports are FINE, both work FINE, so that's not the problem.
3. No "extra USB devices" are connected, ONLY a mouse, & then the phone (yes, I tried it w/o the mouse connected but that didn't help).
4. No "usb hubs."
5. Latest iTunes for this OSX has already been DL'd (iTunes 9.2.1[5]). If you know of a newer one for this OSX, please advise.
6. No antivirus software.
7. No security software.
8. No routers; only 1 comcast modem, period. Wired Ethernet.
9. No wifi gadgets, no wifi at all.
10. No firewalls, except what is on iBook in the SHARING/System-Prefs. section. It's turned OFF.
11. Did the hosts/terminal thing sudo nano whatever it was. There were only 3 lines, NO gs.apple.com:
xxxxx local host
xxxxx broadcast host
xxxx local host
Oh, & btw, ATT officially unlocked this phone (after I filled out their online forms) but I can't finish the process via iTunes to get their Confirmation that "Device is Now Unlocked," so I can use T-Mo.
So that's it. If you have any other ideas of what to do from here, since from your comment, maybe it's the stupid JB on this phone that is causing the problem (???), please advise.
Many thanks! -
Iphone software update server cannot be contacted
think i posted this in the wrong place
whoops!
here we go again:
I am trying to update my iphone software to 5.0.1, and everytime i do I get a message saying "Iphone software update server cannot be contacted -make sure your network settings are correct and your network connection is active and try again later"
This has been going on for weeks, and I've tried everything
I have turned off firewalls to the best of my knowledge
I did that thing where you go to the LAN tab and choose detect settings
I've downloaded the newest version of itunes
I'm not very technologically savvy, so if anyone can help me - i would need a pretty clear walk through of what to do
I really want to get this zombie jogging app, but my iphone needs to update before it can get on the phone
someone
help me
be mercifulPlz help!!!!!!!!!!!!!!!!!!
i am facing same problem.....from two days i am unable to update my iphone........
plz anybody help.... -
I've been trying to restore my phone the whole day and every time that's about to finish the extration this message comes up " The iphone cannot be restored at this time because the iphone software update server could not be contacted or is temporarily unavailable"
Do anyone know if there's a way to fix this? It's in DFU mode so I can't do anything with it anymore, i have no phone.
Please help.Windows user? Maybe you should check your HOSTS file to make sure nothing is stopping you from contacting Apple's servers - though if you're not looking to update you might still be out of luck. Also, maybe disable IP blacklist apps like PeerBlock just in case they're interfering with your connection to Apple.
-
i cant update my iphone and i tried going on my pc on itunes and clicking check for update button but it says that "itunes could not contact the iphone software update server because you are not connected to the internet". But i checked my internet on both my pc and iphone and tried again but it still says the same thing. plzz plzz help
Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
Regards,
Steve -
when i follow the steps it does it but when it gets to itunes it says 'iTunes could not contact the iPhone software update server because you are not connected to the internet' but i am connected to the internet ..?
Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
Regards,
Steve -
Downloading the new IPhone software update keeps failing ,I get error code -3259 is there a fix for this
Disable the security software and try again, Kaspersky's has been really annoying with this along with a couple others.
Maybe you are looking for
-
Hello, I am developing a report using ALV FM, i have field catalog(vbeln posnr matnr netpr). i know how to set subtotals using layout settings once after program execution.but i want subtotals to set before execution( i mean that, in coding itself)
-
Will Apple restore Artist Grid view in iTunes 11?
There are thousands of people asking the very same thing. It's extremely easy for Apple to add this view again!
-
How to Fetch Production ordr No in Batch no Creation table
Hi experts One of our customer needs batch number need to be auto generated and this number should be Production order no. Only one rececipt from pdn will happen to one PO. I tried below query to fetch the value. But it is showing no results. SELECT
-
Hyperion Planning form timeout via Open Form under SV Data Source Manager
Power User can't open one particular big Planning form in Excel. Takes about 30 secs and gets net retry intverval timeout error. The same user can ad-hoc (one menu option up in the SV Data Source Manager) the form in question and can open the other (
-
Slow database performance - WHY ? WHY ? WHY ?
When I run pacman -Syu, the command takes a long time to execute. When I run pacman -S something, and that something does not exist as a package, the command again takes a long time to execute while searching. So my question is, why does pacman take