Should Apple integrate a BPM counter in iTunes?

I think this should be included in the next update if possible. It can become a very useful tool for music lovers like me.

There is this
http://www.apple.com/downloads/dashboard/music/bpmwidget.html

Similar Messages

Hello after updating to the new iTunes i got a box saying that i needed a new version of Apple Mobile Device Support and ihat i should uninstall iTunes and Apple Mobile Device Support then install iTunes again. I have been unable to uninstall itunes

Hello- after updating to the new iTunes i got a box saying that i needed a new version of Apple Mobile Device Support and ihat i should uninstall iTunes and Apple Mobile Device Support then install iTunes again. Problem is I have been unable to uninstall itunes, can't find the installation files .msi. I'm using Windows XP.
Help!

Problem is I have been unable to uninstall itunes, can't find the installation files .msi.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT1926 Every time i go to the apple homepage and click on the iTunes 10 update, it doesnt allow me the option to install. What should i do?

Every time i go to the apple homepage and click on the iTunes 10 update, it doesnt allow me the option to install. What should i do?

Go here -> http://www.apple.com/itunes/download/

Apple TV no longer connects to iTunes

For some time now, my Apple TV fails to connect to iTunes. I don't see it in the device list and the only thing that works is to disconnect from my account and then re-sync from scratch (which takes about 15 hours to synch 10GB of content). I've done this twice in the last two weeks. The Apple TV shows that it is connected to the network and shows a strong signal. It also shows that it should be connected to my iTunes library. Yet, after a few times, it just stops showing up and syncing. I've tried power cycling, but that no longer seems to work either. Is the machine fried? Do I need a new one after a few years of use? Or am I missing something? Thanks for all suggestions.

SL has affected a small number of tv users, as was the case with all previous system, itunes and tv updates, this will always occur, but in every case so far these numbers are not significant and tend to support an issue with the users specific set up rather than the updates themselves.
It would be impossible in practice to test all combinations of software and hardware with impending software releases. The fact that an update works at all is a testament to how well tested the software is. As a result an update may appear on the surface to be buggy, but in reality a contributing factor is causing your problem.
If there is nothing to fix, further Apple updates may well not resolve your problem, you need to be looking for a problem with your own set up.

My apple id is not working in itunes. why?

my apple id is not working in itunes. why?

LeesaHeeley wrote:
When I go to settings/iTunes App Store my Apple ID is not there. When I enter my ID and password it does not save or link to account.
When fist setting up your new iphone you will be asked to log in with an apple id and password. If this did not happen you can then do as you suggested going to settings to itunes and app store and add your apple id login. This apple id login must have already been created for the iphone to accept it. If this apple id is already created but is not being accepted by your iphone you then should shut down your iphone and restart the device.
Good luck.

One solution for Apple TV losing connection to its iTunes Library

In 2012 I bought an Apple TV3 to let me use the AirPlay features of my New iPad with my HD TV. All worked fine and still does. Later in 2012 I subscribed to Netflix and enjoyed streaming movies to my HD TV via the Apple TV. Having had such a good experience with it so far I bought another for our bedroom TV and another for a relative, hoping they would have the same great experience with it.
Both of my Apple TV units at my house have worked flawlessly since installing them. We can start watching a Netflix movie downstairs then go upstairs and carry on where the movie left off.
At my relative's house the experience was not so flawless and has resulted in about 2 months of frustration but happily their AppleTV3 is now also working as expected. It has been quite a journey to get to this point and had a surprising solution.
I am the 'go-to' person in my family for these things so I installed the Apple TV for my relative.
My relative has a Windows XP (SP3) PC running the latest iTunes (11.0.2), a BTHomeHub 2 router, connected by WiFi to the Apple TV. The PC was connected by ethernet cable to the router. I installed the Apple TV, set up the hdmi connection to the HD TV, connected it to the WiFi network, upgraded to the latest iTunes on the PC, added the Apple ID for Home Sharing to iTunes and the Apple TV and could connect to the iTunes library on the PC, all good so far. I could play video or music or podcast or view photos from the iTunes library on the PC but after a short time (a few minutes or so), if I tried to play a different video or music track the I would get the familiar spinning icon and the Apple TV would not play the media file. Often the Apple TV would still show the contents of the iTunes library but would not play anything from it. When it was in this state it was still possible to play iTunes Trailers or Purchased content or a Youtube video or display photos from my library. This proved it was still connected to the internet and to some extent my library on the PC because it could display photos.
Initially I thought it was a WiFi problem as that was how the Apple TV was connected to the router. So as I already had a Powerline ethernet link running from the router to the TV for the Humax Freeview box for the BBC iPlayer, I ordered a small network switch to share the Powerline ethernet cable with the Apple TV. However the same drooping connection problems were apparent. I tried changing the QoS settings on the Powerline link, tried to prioritise TCP or UDP or both , but no improvement. I decided to abandon the Powerline link in case it was 'too slow', perhaps that was the issue.
I tried one of the Apple TV units from my house, where they were working fine and I got the same problem, at my relative's house it behaved like their unit, it would connect play a movie (all the way through if we let it) but after a few minutes if trying to play something else it would not play anything further. I tried their Apple TV at my house and it worked there, so the unit was not at fault.
At various times while troubleshooting these problems I have unistalled iTunes, reinstalled it, uninstalled Bonjour, reinstalled it (it comes with iTunes), searched the registry and cleaned it (Warning: do this at your own risk as you risk destabilising Windows), I have tried disabling my firewall on the PC and/or on the router, uninstalled the Antivirus / Firewall software (Norton) on the PC, I have added the Ports required for the Apple TV to my router and firewall software, I have read many, many forum posts about what has worked for other people and I tried them all in various combinations.
I decided having tried the above that the problem must be the Windows PC, so I swapped it for a few days with a laptop, connected wirelessly to the router. I had an iTunes library on the laptop so I shared it with the Apple TV and stopped iTunes running on my relative's PC. For a few days it actually worked, the Apple TV would play one movie/music track and I could select another and play it after a few minutes, a partial solution had been found except the laptop was needed elsewhere and I wanted the Windows PC to be the source for the iTunes library. I briefly considered suggesting they should buy a modern PC or Mac as their Windows PC was around 9 years old, may be that was the problem? This would have cost around £400+ and was out of the question. Fortunately I had a spare PC and I decided to swap it with the Windows PC, it was only a couple of years old and as such it must be 'better' I thought. Swapping one PC with another and transferring e-mails and documents etc. took quite a few hours but it was done. I uninstalled iTunes, reinstalled it and set up the home sharing again. This second Windows PC was running XP (SP3) and Norton 360 Firewall/Anitvirus software. I checked that after installing iTunes the Program rules in Norton were allowing the TCP and UDP communications expected by the Apple TV, I noted these were not specific ports but all TCP and all UDP communications were allowed. All of this met the recommendations that other posts had suggested. I tried it with the Apple TV but no, exactly the same problem, the iTunes library could not be found after a few minutes.
I found that if I restarted the Apple TV it would connect and play a file (movie/music etc) but if I played an iTunes trailer or just waited a minute or so then it would lose the connection. Another symptom would be when I landed on the 'Compters' icon it would tell me to 'enable home sharing on the PC with this Apple ID' , which I had already done.
If I tried playing via the Apple TV while selecting tracks from within iTunes on the PC, then sometimes the AirPlay icon was present or not present, sometimes worked and would then always not work until I restarted at least iTunes and the Apple TV, if not also the router or PC, whatever I tried it would not result in a connection between the Apple TV and the PC that would survive more than a few moniutes at a time.
Having swapped the Windows PC hosting the iTunes library with another I swapped the Apple TV again with one from my house, again same behaviour. So this suggested the problem was the BTHomeHub router as that was the only bit of hardware not exchanged. I compared its settings with the same unit at my house, I tried forwarding ports, I tried chaging the security from the default 'WPA & WPA2' to WPA or WPA2, still no solution. I tried reducing the default WiFi connection protocol from 802b/g/n to 802/b/g. I tried variations of all the other possible settings that could be changed but in the end set them to match the ones at my house. Still no solution. I considered buying an Airport Extreme or similar to link that via an ethernet cable to the router and enable it to be the WiFi access point for the Apple TV. This would have cost around £80 similar to the cost of the Apple TV itself, so was also dismissed as an idea.
I decided to restore the router to factory settings, this was done and I set up the WiFi connection again to the Apple TV, still no solution, same behaviour on the Apple TV. I decided it must be a problem with the WiFi so I tried a direct ethernet cable trailed through the house from the router to the Apple TV to eliminate the WiFi involvement, that would have to be the answer, wouldn't it? No, same problem.
I discovered some useful diagnostics along the way that are somewhat techie but worth persevering with as they could be useful for diagnosing what the problem could be. Find out on your router what the IP Address is for your computer that is hosting your iTunes library and the IP Address for your Apple TV. The IP address is essential for either device to connect with each other or the internet. The Apple TV IP address can be seen via Settings/General/Network, it has the form like '192.168.1.69' and for the PC it was '192.168.1.80', the values don't have a particular significance but the last digits after the 3rd dot will be different for each device.
On the PC (or Mac), open a Command (PC) or Terminal(Mac) prompt and try to 'ping' the Apple TV to see if you get a response
e.g.
c:\ping 192.168.1.69
or
c:\ping apple-tv
You should get a response indicating the number of milliseconds it takes for the 'ping' to be returned to the PC from the Apple TV , this will show that the PC can connect to the Apple TV, if it does not get a response then you should check that the PC and Apple TV are connected to the same network (either wired or wifi). You must be able to get a successful ping for the connection between the PC and the Apple TV to work at all.
Another diagnostic is to check the network status on the PC (or Mac)
e.g.
c:\netstat -an
This will show all the current TCP/UDP connections and also the local and remote IP addresses and ports. Look for the IP address of the Apple TV in the third column, there will be many rows returned so just concentrate on the rows with the IP addressses of the PC and the Apple TV
e.g. look for rows like the following:
TCP 192.169.1.80:3689 192.168.1.69:49123 ESTABLISHED
UDP 192.168.1.80:5353 *.*
UDP *.123 *.*
TCP Port 3689 is used by the Apple TV to communicate with iTunes for playing content. This connection is essential, there may be more than one 'established' connection to the remote Apple TV from the local PC.
UDP Port 5353 is used by the Apple Bonjour service to send multicast communications between iTunes and any iOS devices on the same network, such as the Apple TV, again it is essential.
Port 123 is used by Apple products to obtain the date and time, the UDP row above shows that any local IP Address can communicate with any remote IP address on the router's network and provide it with date and time information.
If your firewall software on the PC is blocking any of these ports then the 'netstat' command is useful to see if you need to unblock any. In my experience, this port unblocking was not necessary as when I installed iTunes, the Norton software automatically set up appropriate rules for the iTunes program, and opened the required TCP and UDP communications as iTunes needed.
Likewise, on the router itself, I have the UPnP setting enabled and this allows software like iTunes and Bonjour to traverse the router's firewall without it being necesssary to explicitly set the ports to be forwarded.
If I started the Apple TV, and ran the 'netstat -an' command over the next few minutes I could see the number of rows for the Apple TV diminish, and this was a symptom of the dropping connection problem.
Ultimately having replaced the Apple TV with another 'working' one , swapped the PC, restored the router to factory defaults, disabled the Windows or Norton firewall, tried ethernet and WiFi connection between the router and Apple TV it struck me that the only component I had not considered was the insignificant ethernet cable linking the PC to the router. This has been present since the router was installed for the original PC around 4 years ago. But surely this was how the original PC and the swapped in PC were getting to the internet quite normally and successfully? Also this was how the Apple TV was accessing the PC via WiFi then via the router through this ethernet cable, there was no way it could be the cable, cables don't allow a connection for a short time and then cause a timeout can they?. Thus, confused, and with all other avenues explored, I removed the cable between the PC and the router and enabled a WiFi connection from the PC to the router. After restarting the PC, Router and Apple TV, just to be sure, I tried the Apple TV again.
I could play some music on the Apple TV from the iTunes library, I could play it for a minute or so and then go to movies and play a movie from the iTunes library. I tried to play an iTunes trailer, some YouTube videos, these worked as usual. I then went back to the library and yes, I could play another music track or another movie. I forced the Apple TV to 'sleep' via Settings/General/Sleep Now and tried again, I woke it up and could play any music or movie from the library. Elated, I went out for meal with the family, nervously hoping throughout the meal that the solution had been found. After a couple of hours we returned, woke up the Apple TV and yes, oh yes!, it would connect with the library and play a succession of music or videos without seeing any dropped connections. Several hours later I could wake up the Apple TV again and select any content from the iTunes library on the PC and play it, finally the unit is behaving as I would expect.
This solution may not apply for all, but it worth following all of the components in the path between the Apple TV, router, computer (either PC or Mac) and the iTunes library and checking that each is able to commmunicate successfully and over a period of time reliably so that the Apple TV can perform as flawlessly as it is capable of.
Don't, as I did expect the solution to involve a complicated series of special settings of ports or communications protocol changes. Do perform a clean install of iTunes and keep it updated, do keep Firewall settings simple and let the settings be default settings, do rely on UPnP (Universal Plug and Play) on the router. Let the router select which channel it wants to use, it will select the channel with least interference...and check out that insignificant ethernet cable if you have one. It might work fine for general communications from the computer to router to the internet but it can be a source of connections dropping on the Apple TV!
My relative is now a happy Apple TV user too.

Useful to watch what is happening to the TCP/UDP connections when the Apple TV is connected to iTunes and when it is actually playing some media from iTunes and when it stops playing.
To see this, use the Network Statistics command 'netstat' from a Command prompt (Windows PC) / Terminal Window (Mac):
e.g. for Windows:
c:\netstat -an 5
This repeats the netstat command every 5 seconds, use Ctrl-C to quit the command. (Use 'netstat -h' for help with this command)
While iTunes is running there will be a number of TCP records displayed for the computer's IP address using port 3689, showing at least 3 ports in use for the Apple TV's IP address.
i.e.
TCP host_ip:3689 apple_tv_ip:49187 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49196 ESTABLISHED
TCP host_ip:3689 apple_tv_ip:49255 ESTABLISHED
When it is playing content there are more connections established, some of these rows will gradually disappear when the media file stops playing. These addional TCP records show iTunes using different ports from 3689, but only while media files are being played.
When a video file is played, (on this Windows PC at least) the iTunes host is using ports 4463 and 4464, with the Apple TV using port 7000. When playing a music track or podcast, the iTunes host is using port 4472 or 4489 and the Apple TV is using port 5000.
When the media is playing, the fourth column returned by the 'netstat -an 5' command : 'State' shows as 'ESTABLISHED' and shortly after the media file is stopped playing it shows as 'TIME_WAIT' until the record disappears after a minute or so.

Changing my Apple ID - what happens to my iTunes purchases

I am getting rid of an old email account that is by default became my Apple ID (and username for the iTunes/App store).
Will my purchases from the App store and iTunes get wiped out from my devices?

As long as you update your existing account with the new email address then you shouldn't lose anything, it should remain linked to the account. You can update the primary email address on your account via the Store > View Account menu option on your computer's iTunes, by tapping on your id in Settings > iTunes & App Store on your phone and viewing your account, and via http://appleid.apple.com
After updating it you may need to tap on your id in Settings > iTunes & App Store on your phone and log out and then log back in for it to be 'refreshed' on it

Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.

My older model Apple TV won't connect to iTunes and does not show up in my devices list in iTunes. I have two Apple TVs in my house and I can't imagine that this is part of the problem but I mention it just in case. My other Apple TV is brand new and it connects to iTunes just fine. I've tried most of the "fixes" and one says to Force Sync but I can't since Apple TV isn't in my device list. Another "Fix" said to Navigate the Apple TV to Settings --> Downloads --> Check for Downloads, but when I tried that there was no option for "Downloads" under the Settings Heading. I'm at a loss. Please help. Could this be an issue with too many authorized devices? We have three iPads, two iPhones, laptop, desktop, two Apple TVs, and an iPod and most of them are syncing the same music playlists and whatnot... have I run out of rope?

hi, just posting to everyone in general..its not you, or your apple tv, it is itunes.
ok, ive had the exact same issues for weeks now, as with everyone i had done the lastest upgrade and no longer could see/sync my gen 1 appleTV.........so, i removed the upgrade and went back to the prev version, even though it was showing in my prefs under appleTV, it still wouldnt show in the side panel under devices....i gave up.
This week i was determined to get it to work! So i started from scratch, totally removed itunes and started back with version 9 and upgrade each version from there, i had no luck, ic clicked find appleTvs but it wouldnt....however i just d/l version 9.2.0.61 and BINGO!. No sooner has it opened and up popped the side panel devices list, showing my appleTV..all ready to be synced etc. I immediately panicked of course haha..and set it all up and its working perfectly.
...Only catch now is that this older version will not be compatiable with my iphone, which i do keep music on...seems we cant win. grrrrrrrrrrrrrrrr this will be the same for all the latest apple products.
Apple needs to allow more than one version of itunes per pc OR perhaps they could get their act together and include all of the millions of APPLETV GEN1 owners in there latest upgrading..after all, THEY made the product and THEY do sell the movies/tv shows, perhaps they could stop making all the upgrade all about the music only!......on which i might add why not incluse movies/tv shows in icloud! yet another upgrade that should be included in the APPLETV GERNERATION 1!..yes we do still exist!
at the very least, im happy ive managed to get all my movies etc onto the apple tv, where ill keep them and from now on d/l directly onto my apple tv. I usually d/l to my laptop and then send them to the appletv but while trying to get all this sorted i did a test, i d/l a movie using my appletv hoping it would somehow let itunes "find" it and getting it to show up in my device list, but it didnt work, however it did sync/send the movie to itunes.. so at least i could save a back up copy.
good luck trying, as i said this has been weeks and this is the only solution ive found so far....and going through these forums its obviouse its itunes thats the issue, NOT Our apple tvs.

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

I updated my itunes then i couldn't sync my iphone anymore, it shows me that i didn't connect my iphone to my computer, can i know why i can't sync my iphone??? should i reinstall the older version of itunes???

i updated my itunes then i couldn't sync my iphone anymore, it shows me that i didn't connect my iphone to my computer, can i know why i can't sync my iphone??? should i reinstall the older version of itunes???

Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

I rest my iphone 4 now it told me to connect to itunes I did that it restored and everything but it still saying counted to itunes and my computer shows a error

I rest my iphone 4 now it told me to connect to itunes I did that it restored and everything but it still saying counted to itunes and my computer shows a error

iOS: Unknown error containing '0xE' when connecting to a Windows PC
iTunes: Possible iTunes Store errors
Resolve iOS update and restore errors
I don't see that error code in any of the apple support links.

Does Apple have a way to manage iTunes accounts on Corporate owned devices, meaning if someone leaves the company how does the company access the purchase apps as they are the owner of them.

Does Apple have a way to manage iTunes accounts on Corporate owned devices? So, if someone leaves the Corp. how would the company have access to all purchased apps for any device.

If the apps were purchased using a corporate iTunes account, someone at the company should have the password. If they were purchased under a user's iTunes account, even though the device was owned by the company, the apps are tied to the user's Apple ID and do not belong to the company.

Integrate a BPM with a Webservice of SAP XI.

Hi experts,
We want to integrate a BPM with a Websevice published in SAP XI.
The BPM sends messages synchronous (abstract interface) to a Business Service that receives a message synchronous (inbound interface).
For the integration of these services is necessary to set up a Receiver Agreement with a Communication Channel of type SOAP Receiver.
My questions are:
Why should the communication takes place between SAP XI I have to set up a channel SOAP?
Is there any way to send messages from a BPM to a service SAP XI (Webservice / Interface) in an efficient manner?
Thanks,
Jose.

To deploy the wsdl file in XI,
You can connect to XI server by using the End Point URL as
The SOAP Sender uses the XI Server URL as below
http://<server>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>
Service & channel indicates the Sender SOAP adapter in XI to be used..and will direct to integration server.
Refer
call Webservice with XI SOAP Adapter
How To Set Up a Web-Service-Related Scenario with SAP XI
https://websmp207.sap-ag.de/~form/sapnet?SHORTKEY=01100035870000582377&
Invoke Webservices using SAPXI
SOAP Sender Steps
SOAP Sender Steps
Edited by: parvathy sriraman on Sep 19, 2008 9:42 AM

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

Hi rixa03!
I have a couple of troubleshooting steps for you to try to resolve this issue. First, you should try closing the app according to the instructions found on this website, which is a troubleshooting assistant for the iPad:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/#section_3
If the issue persists, you may need to try resetting the iPad, the instructions for which can be found here:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Should Apple TV appear on my mac's network? Home Sharing

just hooked up my Apple TV and set up to home share on my itunes. the TV is not finding my itunes which is set up to home share and i cant see the apple tv in my finder, networks. Should i see the Apple TV on my mac? and any suggestions what to do to get my mac's itunes libary on the Apple TV
thanks
Brad
ps my itunes is up to date.

the appletv does not show up in finder or network.
the appletv will not show up anywhere other than the bottom right of itunes where you can select different speakers.
homesharing needs enabled on both itunes and the appletv.
if the appletv cannot see itunes then it is possible that you have a firewall or anti-virus app blocking the connection.

Should Apple integrate a BPM counter in iTunes?

Similar Messages

Maybe you are looking for