Should Clients be able to access Wsuscontent folder share?
I was testing some MDT options for installing approved updates during the install task. One of the steps was to map to the WSUSContent folder on our wsus sever. Access was blocked by our firewall and the shares were not configured.
That got me thinking. Do clients need to be able to access this folder share to download the updates from WSUS? Are my clients currently downloading from MS based upon the approvals?
Do clients need to be able to access this folder share to download the updates from WSUS?
Clients DO NOT download from the share directly; the download is done via an HTTP GET file transfer call to http://wsusServer/Content/pathNameToFile.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.
Similar Messages
-
Should I be able to access virtual host via localhost/site path?
I finally have been able to successfully set up a virtual host on my local host.
I can access http://localhost which redirects me to the http://localhost/xampp page and I can access my local site with http://nif.local/. I thought I had read that I should still be able to access my local nif site via http://localhost/nif.local. Is that correct? If so, what should I check since I get a 404 error via the second way? I just want to make sure everything is set up correctly.
Thank you.Now sorted;-). Can disable Siri in settings for when phone is locked. Why is this not default?
-
itunes is telling me i already purchased a song but it is not in my library. Where do all your purchases go? I am tried of repurchasing songs. You should always be able to access any song you've bought in the past!
itunes is telling me i already purchased a song but it is not in my library. Where do all your purchases go?
Purchases go in your library. They'll be listed in the main section for each type of content, and normally also in the Purchased playlist. Was the song ever in your library, or have you been totally unsuccessful in getting it to download?
I am tried of repurchasing songs. You should always be able to access any song you've bought in the past!
Unfortunately the content owners do not as of this time agree. All the major download stores have the same "one purchase one download" for content other than apps because the content owners require payment for every download whether or not it's a new purchase.
If you can post more details about your setup, software versions, and the exact nature of the problem, perhaps someone here can help you figure out what's going on.
Regards. -
after updating my iphone 4 to iOS5, shouldn't I be able to access the camera from the lock-screen, or is this just an iPhone 4s feature?
jmph wrote:
Double pressing the Home button displays the Camera button. However after the phone goes to sleep and is awakened the Camera button isn't there. A double press brings it back. Is there a way to make it stay there?
No, you will have to double press each time on the lock screen to bring back the camera button. -
Client not able to access EJB deployed in Oracle8i
Hi,
After lot of pains, I was able to deploy EJB in the Oracle8i DB.
Now I am facing problems when the Client makes an request to get the reference of this deployed EJB.
This is the error I receive :
"C:\JDeveloper3.0\java1.2\jre\bin\javaw.exe" -mx50m -classpath "C:\sandeep\JDeveloper3.0\class;C:\JDeveloper3.0\lib\jdev-rt.zip;C:\JDeveloper3.0\jdbc\lib\oracle8.1.5\classes111.zip;C:\JDeveloper3.0\lib\connectionmanager.zip;C:\JDeveloper3.0\li b\javax_ejb.zip;C:\JDeveloper3.0\aurora\lib\aurora_client.jar;C:\JDeveloper3.0\aurora\lib\vbjorb.jar;C:\JDeveloper3.0\aurora\lib\vbjapp.jar;C:\JDeveloper3.0\aurora\lib\vbjtools.jar ;C:\JDeveloper3.0\aurora\lib\vbj30ssl.jar;C:\sandeep\JDeveloper3.0\project\MyEJBRemoteSource.jar;C:\sandeep\JDeveloper3.0\project\MyEJBRemoteGenerated.jar;C:\JDeveloper3.0\java1.2\ jre\lib\rt.jar;C:\JDeveloper3.0\lib\jboejb.jar" LearnEJBPack.EJBClient
Creating an initial context
Looking for the EJB published as 'test/MyEJBClass'
java.lang.NoClassDefFoundError: oracle.aurora.rdbms.ClassResolver
java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContextFactory.getObjectInstance(java.lang.Object, javax.naming.Name, javax.naming.Context, java.util.Hashtable)
javax.naming.Context javax.naming.spi.NamingManager.getURLContext(java.lang.String, java.lang.Object, java.util.Hashtable)
javax.naming.Context javax.naming.spi.NamingManager.getURLContext(java.lang.String, java.util.Hashtable)
javax.naming.Context javax.naming.InitialContext.getURLOrDefaultInitCtx(java.lang.String)
java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
void LearnEJBPack.EJBClient.main(java.lang.String[])
Exception in thread main
I donot understand why it is not able to find
oracle.aurora.rdbms.ClassResolver.
Do I also need to load some other classes also?
Let me know.
Thanks
Sandeep
Details : JDeveloper 3.0 Oracle 8.1.5i Windows 2000Hi Giri,
In SQL Server Help file content are i pasted here
Using the Local Service Account
The Local Service account is a special, built-in account that is similar to an authenticated user account.
The Local Service account has the same level of access to resources and objects
as members of the Users group. This limited access helps safeguard your system
if individual services or processes are compromised. Services that run as the Local
Service account access network resources as a null session with no credentials.
Using the Network Service Account
The Network Service account is a special, built-in account that is similar to an authenticated
user account. The Network Service account has the same level of access to resources and
objects as members of the Users group. Services that run as the Network Service account
access network resources using the credentials of the computer account.
Important:
Microsoft recommends that you do not use the Network Service account for the SQL Server
or SQL Server Agent services. Local User or Domain User accounts are more appropriate
for these SQL services.
Using the Local System Account
The Local System account is a highly privileged account; use caution when assigning
Local System permissions to SQL Server service accounts.
Security Note:
To increase the security of your SQL Server installation, run SQL Server services under
a local Windows account with the lowest possible privileges.
Regards
Jambulingam.P
Edited by: Jambulingam P on Aug 12, 2009 1:58 PM -
XE Client not able to access XE Server database
I have installed Oracle Database 10g Express Edition (Western European) OracleXE.exe on one Windows XP machine and Oracle Database 10g Express Client OracleXEClient.exe on onother. I have followed the instructions to set the Server to accept remote access by performing EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE); as SYSTEM. I can ping the machine running the XE Server (10.5.111.86) from my Client machine, yet I cannot access the remote XE Server using either http://10.5.111.86:8080/apex or from the SQL command line as connect SYSTEM/mypassword@//10.5.111.86:1521/XE. The http access ultimately yields a Page Not Found and the sql connect yields a ERROR:
ORA-12170: TNS:Connect timeout occurred.Can you telnet to it on port 8080?
Open a command prompt and type:
telnet 10.5.111.86 8080
you should see a blinking cursor. If not turn off all firewalls on the target machine and try again.
Brett -
Rd client via rdweb cannot access local folder
hi,
i recently installed remote-desktop web-service on Windows 2008 R2 for remote user to access a non-proprietary Microsoft application.
the installation was made in one box include the application
a. Remote Dekstop Session Host
b. Remote Desktop Licensing
c. Remote Desktop Gateway
d. Remote Desktop Web Access
i have managed to configure it to allow internal and external users to access the application by using RDWeb.
there are 2 outstanding issues here:
1. i tested the RDWeb to access MS Office (Word/Excel) remoteapp and save a doc to local folder.
tried to save it into my local folder, but it always ended-up with an error :
"Network error: Windows cannot access \\tsclient\d\(any local folder given). You do not have permission to access \\tsclient\d\.. "
2. for non Microsoft remoteapp, is there a way (by Group Policy perhaps?) for rdweb-users to locate their local drive/folder within the application?
anyone has ideas to resolve it?
thank you in advance.
rgds.Hi,
Thank you for posting in Windows Server Forum.
Terminal service Antivirus Exclusion list is available for previous version available but for new server it’s still not published. You can go through below thread might helpful in your case.
Antivirus exclusions for RDS 2012 R2
http://social.technet.microsoft.com/Forums/en-US/3352be76-7489-4a11-be7b-50dd03f94441/antivirus-exclusions-for-rds-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki -
Not able to access gmail folder
Have a new Mac Air.
As part of setup integrated with my gmail account.
gmails now come into Mac email.
However :
i) After some time emails in inbox are automatically transferred to Gmail Folder
ii) Gmail folder is visible but unable to access or see the content. Can just see the number of emails in the folder
Any ideas ?Mail.app downloads all of your emails and stores them locally. It does not access them when you click on the folder.
If you have a lot of emails, it may take a good deal of time to initially sync them. I would let Mail.app run in the background for a day or two so that it has time to sync.
If that doesn't work, I would try deleting the Gmail account in settings and re-creating it. -
RV082 Remote Clients not Able To Access Server
I have a RV082 and several of my remote laptops cannot access my server using its domain name. It can be accessed using its internal ip address. The issue is that you can log onto the server using remote access and the ip however you cannot use any shortcuts using the domain name. You can see the server with the domin name however no access path is available. This is only on a few remote user laptops. Others work perfectly. Does anyone have any advise?
Evans,
Please be details as possible when posting next.
You say some of your remote laptops can't access server via name and some can. How are the computers than can connect to servers name different from the ones that can't?
what connection type are the remote user using to connect to your network?
They using vpn software located on RV082?
IPsec / PPTP both ?
What's the subnet's that the remote computers are remote from ?
whats the local subnet of RV082?
Is the subnet's the same on remote computer as the RV082 ?
What's the WAN type (public) (private ) ip address ?
What's the topology of your network ?
You can also give the Cisco Small Business Support Center a call @ 1-866-606-1866 and get help with your issue as well.
Thanks,
Jasbryan
Cisco Support Engineer
.:|:.:|:. -
Kernel Panic and Application Crashes when Accessing a Folder
Hi,
I originally posted in the iTunes forum (http://discussions.apple.com/thread.jspa?threadID=252516&tstart=75) with this problem as it was in iTunes where I first noted the issue. However since then I have discovered it is a system wide issue.
Everytime I try to access a specific folder, my iTunes Music folder, whichever application is accessing it will crash. Finder crashes when trying to view the folder, and other apps will crash when trying to open from or save to that folder. There will be no crash reporter when they crash either. I have also experienced two kernel panics, one when iTunes was playing, and another when Tech Tools Pro was doing its surface scan. The folder is on one of my two FW800 connected external hard drives. The kernel panic looks like this:
panic(cpu 0 caller 0x002478C8): hfs: block mark free: trying to free non-existent blocks (-1094886590 -1078469906 39039948)
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x002478C8 0x00246F00 0x00245258 0x002453A8 0x00246150
0x0022AE54 0x0022B068 0x00220AD4 0x000FD688 0x000E8058 0x000E7FA0 0x000F0D64 0x002A9BF4
0x000ABE30 0x4D4C4C4C
Proceeding back via exception chain:
Exception state (sv=0x2E2EE500)
PC=0x90027ECC; MSR=0x0000D030; DAR=0xF0077300; DSISR=0x42000000; LR=0x92914CD0; R1=0xF00FEC00; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT 2005; root:xnu-792.6.22.obj~2/RELEASE_PPCModel: PowerBook5,2, BootROM 4.7.1f1, 1 processors, PowerPC G4 (1.1), 1.25 GHz, 1 GB
Graphics: ATI Mobility Radeon 9600, ATY,RV350M10, AGP, 64 MB
Memory Module: SODIMM0/J25LOWER, 512 MB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J25UPPER, 512 MB, DDR SDRAM, PC2700U-25330
AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
Modem: LastDash, UCJ, V.92, 4.0, APPLE VERSION 2.6.6
Bluetooth: Version 1.6.6f22, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITADVD-R UJ-816,
Parallel ATA Device: HTS548080M9AT00, 74.53 GB
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Kensington PocketMouse Pro, Kensington, Up to 1.5 Mb/sec, 500 mA
USB Device: psc 1310 series, hp, Up to 12 Mb/sec, 500 mA
FireWire Device: 6B200P0, Initio, Up to 800 Mb/sec
I am not entirely sure as to what this means or how to deal with it. I am able to access the folder via terminal, but there are 2700 folders within my iTunes Music folder and 23137 songs, so it could take me a very long time to find the exact file or folder which is causing me problems. I could potentially have enough disk space should a backup be required but it would be backed up to 3 different drives and would be close. That is assuming of course that I would not experience the same panic when accessing the area. Can anyone help me with this?
Powerbook G4 1.25Ghz Mac OS X (10.4.3)The first phase:
Since the Kernel Panic is temporarily a state of suspended animation because of a safe-boot solution, try the next step. This is a pre-caution to avoid any failures during ongoing troubleshooting.
After safe-boot, launch System Profiler and select /Software/Extensions/ directory in Contents (on the left column ) menu. Next, open /System/Library/Extensions/ folder by Go to Folder command or by manual. Compare the both contents. You'll see System Profiler shows less kernel extensions than /System/Library/Extensions/ folder. There are ".kext" files that are not shown in the loaded Extensions directory. If there is a most suspect third-party extension (perhaps FireWire's driver), try removing out of the folder to a temporary made folder on the desktop-- you may be prompted the admin or login password.
The second phase:
TechTool Pro fixed a file structure error in one file on the main drive, and some bad custom icons or bad bundle bits error now lie on on the main and one of your secondary drives, but not the previous problems. Also, you still cannot access that folder, however folders within that folder you can get to just fine, via the Go To Folder command or reveal in finder from iTunes.
Those symptoms appear to suggest that some directories structure and the volume information other than the main drive have lost their consistencies and a directory may be no longer accessible for some reason which happened before or during the Kernel Panic. Techtool Pro 4.0.6 seems to not be able to fix those problems. So if you have DiskWarrior 3.0.3, run it and hopefully fix them. If you do not have it, try the followings.
Connect the external FireWire drive in question, then boot into a Safe-mode. If this does not work well, first boot into a Safe-mode then connect the device.
Launch Terminal utility. Type diskutil list at the prompt. Here is an example to be displayed:
MyMachine:~ Myself$ diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk0
1: Applepartitionmap 31.5 KB disk0s1
2: Apple_HFS MacOSX_HD 70.7 GB disk0s3
3: Apple_HFS Data_HD 162.8 GB disk0s5
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *111.8 GB disk1
1: Applepartitionmap 31.5 KB disk1s1
2: Apple_HFS Data21HD 69.9 GB disk1s3
3: Apple_HFS Debugger_HD 41.6 GB disk1s5
Find the disk identifier that points the external device in question. Type sudo fsck_hfs -fy /dev/disk1s3 if the target drive would be disk1s3. If the result shows you like below, the symptoms may be fixed.
MyMachine:~ Myself$ sudo fsck_hfs -fy /dev/disk1s3
** /dev/rdisk1s3
** Checking HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume Data21HD appears to be OK.
If the above solution fails, boot into a Single-user-mode and perform the same way as above-- a "sudo" parameter MIGHT not be needed to type.
The third phase:
Start up from Mac OS X 10.4.x Install disc. Launch Disk Utility program. Try repairing the target volume(s) on the external device and then repair the permissions.
If the above solution fails to fix all filesystem problems on that volume, then you may need to abandon hope some file or folder in question to trash it/them. Of course, I do not hope so.…
Also, when I booted into Safe Mode it started up the volume menubar item as usual but I had no sound... Is this normal during a Safe boot?
Certain Mac OS X features do not work when you are started up in Safe Mode. For example, you can't use DVD Player, capture video in iMovie, use an AirPort card, use audio input or output devices, or use an internal or external USB modem.
So it should be no problem on this matter. -
Accessing trash folder causes folder to lock on server?
Hi,
I've been having this problem. I hope someone can help with some advice:
My workplace IMAP account's trash folder is named "deleted-messages". I use this folder to store my trashed messages on my IMAP server. In Apple Mail, I had mapped this successfully as the Trash folder for about 2 years already. I've been happily using Apple Mail during this time.
A couple of days ago, I could no longer access my deleted-messages folder:
1. each time i deleted a message, Apple Mail would tell me it could not move the message to the 'deleted-messages' folder.
2. each time i tried to view the folder's contents, Apple Mail would not respond and would show me the 'spinning beachball' until I forced a quit.
But I have not had a problem using other email clients (Thunderbird and Pine).
When I logged into my workplace server through a command prompt, I noticed a "deleted-messages.lock" file in my mail directory. I deleted the lock file, and all my other clients are able to access my deleted-messages and delete my mails correctly. However, when I access "deleted-messages" (or Trash) using Apple Mail, I get the same 2 problems listed above, and a new ".lock" file is created in the mail directory.
I can't seem to get around this - I have completely deleted my account in Apple Mail and recreated one, but the same problem arises.
Can someone help me understand what's going on?
thanks!ok, found the problem - there was a bug with the new imapd service being run...
thanks for reading! -
VPN clients not able to ping Remote PCs & Servers : ASA 5520
VPN is connected successfully. But not able to ping any remote ip or fqdn from client pc. But able to ping ASA 5520 firewalls inside interface. Also some clients able to access, some clients not able to access. I new to these firewalls. I tried most of ways from internet, please any one can help asap.
Remote ip section : 192.168.1.0/24
VPN IP Pool : 192.168.5.0/24
Running Config :
ip address 192.168.1.2 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
passwd z40TgSyhcLKQc3n1 encrypted
boot system disk0:/asa722-k8.bin
ftp mode passive
clock timezone GST 4
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 213.42.20.20
domain-name default.domain.invalid
access-list outtoin extended permit tcp any host 83.111.113.114 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.113 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq smtp
access-list outtoin extended permit tcp any host 83.111.113.114 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq www
access-list outtoin extended permit tcp any host 83.111.113.115 eq https
access-list outtoin extended permit tcp any host 94.56.148.98 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.117 eq ssh
access-list fualavpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_nat0_outbound extended permit ip 192.168.5.0 255.255.255.0
92.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 1
2.168.5.0 255.255.255.0
access-list inet_in extended permit icmp any any time-exceeded
access-list inet_in extended permit icmp any any unreachable
access-list inet_in extended permit icmp any any echo-reply
access-list inet_in extended permit icmp any any echo
pager lines 24
logging enable
logging asdm informational
logging from-address [email protected]
logging recipient-address [email protected] level errors
logging recipient-address [email protected] level emergencies
logging recipient-address [email protected] level errors
mtu outside 1500
mtu inside 1500
ip local pool fualapool 192.168.5.10-192.168.5.50 mask 255.255.255.0
ip local pool VPNPool 192.168.5.51-192.168.5.150 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound outside
nat (inside) 1 192.168.1.0 255.255.255.0
static (inside,outside) 94.56.148.98 192.168.1.11 netmask 255.255.255.255
static (inside,outside) 83.111.113.114 192.168.1.111 netmask 255.255.255.255
access-group inet_in in interface outside
route outside 0.0.0.0 0.0.0.0 83.111.113.116 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have no
been met or due to some specific group policy, you do not have permission to u
e any of the VPN features. Contact your IT administrator for more information
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy fualavpn internal
group-policy fualavpn attributes
dns-server value 192.168.1.111 192.168.1.100
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value fualavpn_splitTunnelAcl
username test password I7ZgrgChfw4FV2AW encrypted privilege 0
username Mohamed password Vqmmt8cR/.Qu7LhU encrypted privilege 0
username Moghazi password GMr7xgdqmGEQ2SVR encrypted privilege 0
username Moghazi attributes
password-storage enable
username fualauaq password E6CgvoOpTKphiM2U encrypted privilege 0
username fualauaq attributes
password-storage enable
username fuala password IFtijSYb7LAOV/IW encrypted privilege 15
username Basher password Djf15nXIJXmayfjY encrypted privilege 0
username Basher attributes
password-storage enable
username fualafac password VGC/7cKXW1A6eyXS encrypted privilege 0
username fualafac attributes
password-storage enable
username fualaab password ONTH8opuP4RKgRXD encrypted privilege 0
username fualaab attributes
password-storage enable
username fualaadh2 password mNEgLxzPBeF4SyDb encrypted privilege 0
username fualaadh2 attributes
password-storage enable
username fualaain2 password LSKk6slwsVn4pxqr encrypted privilege 0
username fualaain2 attributes
password-storage enable
username fualafj2 password lE4Wu7.5s7VXwCqv encrypted privilege 0
username fualafj2 attributes
password-storage enable
username fualakf2 password 38oMUuwKyShs4Iid encrypted privilege 0
username fualakf2 attributes
password-storage enable
username fualaklb password .3AMGUZ1NWU1zzIp encrypted privilege 0
username fualaklb attributes
password-storage enable
username fualastr password RDXSdBgMaJxNLnaH encrypted privilege 0
username fualastr attributes
password-storage enable
username fualauaq2 password HnjodvZocYhDKrED encrypted privilege 0
username fualauaq2 attributes
password-storage enable
username fualastore password wWDVHfUu9pdM9jGj encrypted privilege 0
username fualastore attributes
password-storage enable
username fualadhd password GK8k1MkMlIDluqF4 encrypted privilege 0
username fualadhd attributes
password-storage enable
username fualaabi password eYL0j16kscNhhci4 encrypted privilege 0
username fualaabi attributes
password-storage enable
username fualaadh password GTs/9BVCAU0TRUQE encrypted privilege 0
username fualaadh attributes
password-storage enable
username fualajuh password b9QGJ1GHhR88reM1 encrypted privilege 0
username fualajuh attributes
password-storage enable
username fualadah password JwVlqQNIellNgxnZ encrypted privilege 0
username fualadah attributes
password-storage enable
username fualarak password UE41e9hpvcMeChqx encrypted privilege 0
username fualarak attributes
password-storage enable
username fualasnk password ZwZ7fVglexrCWFUH encrypted privilege 0
username fualasnk attributes
password-storage enable
username rais password HrvvrIw5tEuam/M8 encrypted privilege 0
username rais attributes
password-storage enable
username fualafuj password yY2jRMPqmNGS.3zb encrypted privilege 0
username fualafuj attributes
password-storage enable
username fualamaz password U1YUfQzFYrsatEzC encrypted privilege 0
username fualamaz attributes
password-storage enable
username fualashj password gN4AXk/oGBTEkelQ encrypted privilege 0
username fualashj attributes
password-storage enable
username fualabdz password tg.pB7RXJx2CWKWi encrypted privilege 0
username fualabdz attributes
password-storage enable
username fualamam password uwLjc0cV7LENI17Y encrypted privilege 0
username fualamam attributes
password-storage enable
username fualaajm password u3yLk0Pz0U1n.Q0c encrypted privilege 0
username fualaajm attributes
password-storage enable
username fualagrm password mUt3A60gLJ8N5HVr encrypted privilege 0
username fualagrm attributes
password-storage enable
username fualakfn password ceTa6jmvnzOFNSgF encrypted privilege 0
username fualakfn attributes
password-storage enable
username Fualaain password Yyhr.dlc6/J7WvF0 encrypted privilege 0
username Fualaain attributes
password-storage enable
username fualaban password RCJKLGTrh7VM2EBW encrypted privilege 0
username John password D9xGV1o/ONPM9YNW encrypted privilege 15
username John attributes
password-storage disable
username wrkshopuaq password cFKpS5e6Whp0A7TZ encrypted privilege 0
username wrkshopuaq attributes
password-storage enable
username Talha password 3VoAABwXxVonLmWi encrypted privilege 0
username Houssam password Cj/uHUqsj36xUv/R encrypted privilege 0
username Faraj password w2qYfE3DkYvS/oPq encrypted privilege 0
username Faraj attributes
password-storage enable
username gowth password HQhALLeiQXuIzptCnTv1rA== nt-encrypted privilege 15
username Hameed password 0Kr0N1VRmLuWdoDE encrypted privilege 0
username Hameed attributes
password-storage enable
username Hassan password Uy4ASuiNyEd70LCw encrypted privilege 0
username cisco password IPVBkPI1GLlHurPD encrypted privilege 15
username Karim password 5iOtm58EKMyvruZA encrypted privilege 0
username Shakir password BESX2bAvlbqbDha/ encrypted privilege 0
username Riad password iB.miiOF7qMESlCL encrypted privilege 0
username Azeem password 0zAqiCG8dmLyRQ8f encrypted privilege 15
username Azeem attributes
password-storage disable
username Osama password xu66er.7duIVaP79 encrypted privilege 0
username Osama attributes
password-storage enable
username Mahmoud password bonjr0B19aOQSpud encrypted privilege 0
username alpha password x8WO0aiHL3pVFy2E encrypted privilege 15
username Wissam password SctmeK/qKVNLh/Vv encrypted privilege 0
username Wissam attributes
password-storage enable
username Nabil password m4fMvkTgVwK/O3Ms encrypted privilege 0
aaa authentication telnet console LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 outside
http 192.168.1.4 255.255.255.255 inside
http 192.168.1.100 255.255.255.255 inside
http 192.168.1.111 255.255.255.255 inside
http 192.168.1.200 255.255.255.255 inside
http 83.111.113.117 255.255.255.255 outside
http 192.168.1.17 255.255.255.255 inside
http 192.168.1.16 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn general-attributes
address-pool fualapool
address-pool VPNPool
default-group-policy fualavpn
tunnel-group fualavpn ipsec-attributes
pre-shared-key *
tunnel-group fualavpn ppp-attributes
authentication pap
authentication ms-chap-v2
authentication eap-proxy
telnet 0.0.0.0 0.0.0.0 outside
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:38e41e83465d37f69542355df734db35
: endHi,
What about translating the traffic on the local ASA (Active unit) for traffic received from the VPN tunnel to the internal interface IP address? You can try something like nat (outside,inside) source dynamic obj-VpnRemoteTraffic interface destination static StandbyIP StandbyIP
Regards, -
Let users access personal folder when using webdav on iPad
Hi,
I am setting up Lion server so users on an Active Directory network can access webdav folders from iPads.
I have got this working fine when accessing a shared multi user folder.
I want users to also be able to access their own personal folders, with no one else being able to access the folder.
I can share the Users folder but this will give each user access to other users folders how can I fix this?
ThanksI am still waiting for an answer. If you don't know the answer, but know who to ask or where to look to find an answer, I'd really appreciate it.
-
Accessing SMB/Windows Shares on OS X
I have an invisible windows share called public$, which I allow anyone to (read-only) access on my network. But to be able to access it on a mac I had to give it a password. Are there anyways around this password problem? On windows machines I am able to access this folder without the need for authentication which is what I want since this is read-only and contains documents for general public use which I need the public to automatically have access to it without the need for authentication.
SMB never really likes symbols in shares.
A couple of things. Is this part of a Windows Domain (200,2003, 2008) or part of a Home network? Plus make sure the Mac and Windows machine are using the same Time Server. Also check out the reader reports at MacWindows.com:Snow Leopard and File Sharing Tips and Rerports because one of the current reports might help you. -
I am trying to store an email attachment (an Excel spreadsheet) somewhere on my iPhone 5 to be able to access it easily in the future. I do not need the ability to work on it, just to access it, although it would be convenient if i could load updated versions over it on a regular basis. The spreadsheet was created in Excel on a laptop with Win 7. I read one posting that said I should save the document to iBooks and then could open it whenever I wanted. The same posting refered to something in the upper right corner of the attachment that enabled me to save it to iBooks. Unfortunately, there is no such option showing when I looked at the file, which I did email to myself. I was able to open the attachment, but can't get beyond this point. My tech ability doesn't go much beyond being able to power up my phone, so I need a really simple solution, if one exists.
First of all, Excel file can't save to iBook. (iBook only can view PDF files). That's why you don't see it in "open in" options. In order for you to save excel, you will need a third party app like Numbers, Office2. There are a few free apps that can use to view. I used Office2 from Byte2, because I can not only store and view later, I can do some edit too. Especially when you want to edit a few numbers and re send them to my office or clients will be very useful for me.
Maybe you are looking for
-
Interest calculation procedure in Dunning
How to calculate the Interest in dunning? What are the steps needed to be configured for the interest calculation for the dunning process?
-
How can i figuere out my classpath variable
the tutorial is saying that i need to create and appropriate class path. i know wer to go to set it but what should i set it to. if that makes any sense. you see im trying to run the hello world program and ive tryed everything but setting the classp
-
How to display keywords of a picture ?
I am a complete beginner with LR. I am trying to work with keywords. I am able to assign various keywords to a picture. I know that made several mistakes when assigning keywords. When I select a picture to control which keywords have been assigned I
-
DB2 v9.1fp4 on suse linux 10sp2 - redirect restor PRD to DEV
Hi All, First of all thank you, for valuable TIME. issue: My development server got crashed due to failure of dedicated SAN. in simple lost every thing. since, even DB2 backups happening to SAN. requirement: As we lost all the developments and config
-
This is my list of pages in a book of over 150 pages. In the pages list I have these strange marks indicated by arrows. Anyone know what they are and how did I get them?