Should default gateway change when public IP chang...

I understand that hub remains always as 192.   etc,
but my question is when disconnecting from internet via Hub or powering down hub, thus getting new public Ip address -should the default gateway change as well?.  I always have a constant here?

Thanks John,
there may be some confusion - this is what I'm refreiing to - I may not have been clear, I do understnd that teh Hum i.e. 192.et,etc never changes  but under teh following settings on Home Hub manager this is what I see:
network address changes
Primary DNS changes & secondary........so should The default gateway in this box?
TCP/IP settings
Broadband network IP address
81.xxxxxx
Default gateway
217.xx.xx.xxx
Primary DNS
213.xxxxx
Secondary DNS
213.1xxxxx

Similar Messages

  • Changing default gateway on sbs08

    Hello,
    I need to change the default gateway on my small business server 2008 from 192.168.1.207 to 192.168.1.208. The server is used for exchange 2007 and pretty much runs our network.
    My manager said this is a big job and I need to read up on DNS, MX records and changing SMTP server IP addresses but I cant see what else I would
    need to do. 
    Any help is greatly appreciated!
    Thanks!

    Hi Nuh,
    If you are just looking to change just the gateway IP address, then FOVIA is correct. Just run the Connect to Internet Wizard. For all intensive purposes, your gateway is your firewall or router. Ex. below.
    IP Address:   192.168.1.2  <-This is IP address for the server
    Subnet:       255.255.255.0
    Default Gateway:  192.168.1.207  <- This is the IP address for your gateway, the one that you need to change.
    Now, if you manager is asking you to change physically change the gateway(firewall/router) and reconfigfure it and the network, then this "big job" does make sense when dealing DNS, MX records and such. If not, then just run the wizard and you should be
    gold.

  • Computers connecting to internet via time capsule are reporting no internet connectivity.  PC is reporting default gateway has changed.  How to I correct this?

    Am having trouble with maintaining a stable wireless network via the Time Capsule.  Am running 1 Mac and 3 PC on a Time Capsule wireless in bridge mode connected to a Verizon wireless router.  Verizon wireless is turned off and the Time Capsule seems to be staying connected to the Verizon router.  When any of the connected computerss goes to stanby, they often report the internet is no longer available.  The PCs say the default gateway has changed ans the Mac simply reports the network parameters have changed.  What do I need to do to the Time Capsule to stabilize the wireless network?

    It is unlikely that the gateway changes.. but anything is possible.. sorry I am not in the US.. is your service adsl or cable?? What sort of lease time does the public IP have? Some cable companies now rotate then on the hour I noticed.. others on about 3months.. but most it is one day.
    Track it yourself.. see what gateway address the TC gets and if it is rotating with the IP.
    If your client computers are running Mountain Lion.. the plain fact is, they are not particularly stable.
    Wireless is worst.. ethernet tends to be ok.. but for instance Laptops updated to Mountain Lion can be pretty flakey.. with the TC.. and it is the combo that is more the issue. People report improvement with clean install of ML. BUT there is still a bug there that causes the ML to be less than fantastic.
    I experience it occasionally even with a dlink wireless router.. after a wake from sleep.. the network will drop out and need to be manually connected back.. I have to admit I expect no better from Mountain Lion. I could load Snow Leopard on it and it would drop once every blue moon.. but I got the laptop with ML so I live with it.. !!

  • Changing Router IP while keeping default Gateway

    Hello-  I have a Linksys WRT150N Wireless Router.  The default (out of the box) IP Address is 192.168.1.1, which is also the default Gateway.  I would like to know if it is possible to change the IP address to 192.168.1.2 while keeping the Gateway on 192.168.1.1.  The problem I run into is that when I do change the IP to 192.168.1.2, the Gateway also changes to that address.  I see it is possible under Automatic Configuration - DHCP  to change the IP and the Subnet Mask, but not the Gateway.  Any ideas?  Thank you
    Message Edited by thutter on 05-20-2008 05:36 AM

    No it won't be possible for you to do the settings i.e., to change the ip address to 192.168.1.2...better keep in the same & do the settings.

  • Om,schdule_ship_date should not be updatable when we change a request_date

    Hi all ,
    can you please help to resolve this issue?
    In OM module Sales order form
    we have request_date and schdule_ship_date and they are some default rules are defined
    as sysdate for both the dates and thses should be effected once you save the form.
    our requirement is schdule_ship_date should not be updatable when we change a request_date
    for the already existing sales order(SO).
    This can be achieved through form personalization.
    Thanks & Regards
    maruthi

    Hi dgood76,
    Becoz there are so many personalizations and dff customizations are done on the form .
    If i remove the dependency is anything is effected .
    Thank & Regards
    maruthi

  • Schdule_ship_date should not be updatable when we change a request_date

    Hi all ,
    can you please help to resolve this issue?
    In OM module Sales order form
    we have request_date and schdule_ship_date and they are some default rules are defined
    as sysdate for both the dates and thses should be effected once you save the form.
    our requirement is schdule_ship_date should not be updatable when we change a request_date
    for the already existing sales order(SO).
    Thanks & Regards
    maruthi

    Duplicate.
    schdule_ship_date should not be updatable when we change a request_date

  • How to change the default delivery day when i create a shopping cart?

    hi,dear
    i got some trouble when i was creating a shopping cart.
    i want to change the default delivery day when i reference an old template.
    pls see the pictures and take the details.
    it seems that this forum dont support the [img][/img],so pls clike the link to open the picture.
    if you cant see the picture ,pls tell me,thank you
    step1:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119338649_0.jpg
    step2:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119432170_0.jpg
    step3:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111119557507_0.jpg
    step4:http://p13.freep.cn/p.aspx?u=v20_p13_p_0909111120079773_0.jpg
    Edited by: ming yu on Sep 11, 2009 5:22 AM

    Hello Ming,
    Have a look at following thread concerning BAdI BBP_CHANGE_DEFAULT:
    [Change the delivery date (Required on) of SC|Change the delivery date (Required on) of SC;
    You will have to check in which SC transaction you are in order to distinguish creation from reference to old template.
    Regards.
    Laurent.

  • How do I change the default "date range" when searching in the forums?

    Hi all,
    New to the SAP forums...  How do I change the default date range when searching in the forums?  I am getting a 90 day search by default.  Then I have to change it and search again.  Argh!
    Thanks,
    --Amy Smith

    Hi Amy,
    the default date range cannot be changed by users. It is defined system-wide.
    Regards,
    Michael

  • Should the screen show when the ringer switch is changed?

    My ringer is not working on my 4S with 7. Should the screen show when the mute switch is changed from on to off and back? I believe it did before.

    But is not now. and my ringer is intermittent.

  • How can I change default Gateway

    I have been able to change the default gateway address with various routers from 192.168.1.1 to 192.168.0.1.  The purpose of changeing the gateway is I can connect via a VPN connection to my office.  I realized all the router on 1.1 wouldn't connect but all the router on 0.1 could.  I was with comcast before.
    Now I have several computers (mine and other employee's) who cannot connect to the VPN as they are with verizon and all are on 1.1.  The problem is, verizon won't help and they say we need advanced network help and their not willing to assist.
    Can anyone help me and does anyone know if it's possible?
    Thanks in advance.

    Let me just throw in that I have an Actiontec router, not Westell, with FiOS, but I definitely have my router's IP set to 192.168.0.1.  DHCP range set to 192.168.0.100 thru .150.  All TV functions work, including remote DVR, mutl-room DVR, on-screen caller ID, and widgets.
    I haven't needed any Verizon tech support (knock on wood) but if I did, I'd reset to the default values and once tech support was done, restore using a saved config file.

  • Best practice to change default gateway for HA-CAM

    Hi,
    The next week end, i will have a downtime to change it's HA-CAM's default gateway.
    My question is, how can i do that?.
    This change is not synchronized if i change only from an active cam (service Ip) o it does?
    I was thinking on stops services for standby cam, then connect to a service ip, change its default gateway to active cam, then stops services and start them for standby cam and so on...
    This is correct or this idea is wrong?
    Please, I need suggestions.
    Thanks for advance.

    Kaylan
    If the user vlan is routed on a L3 device before going to either the MPLS router or the firewall you could use PBR on the L3 device (if supported).
    But as Reza says, we need more info on your network layout.
    Jon

  • When adding a mp4 videos as a slide, what should quality be changed to?

    When adding a mp4 videos as a slide, what should quality be changed to? (Optimized, J-Peg or High 24-bit)
    What will this do?
    Thanks,
    Mike

    Himanshu, if loading a video on a slide, would the slide quality setting for that slide have any effect at all? It's my own understanding that the videos are always separate and loaded when needed. So I'm curious if the slide quality would remotely matter in this case.
    Cheers... Rick

  • How do I change the default text for when I open up pages?

    How do I change the default text for when I open up pages?

    Colin,
    You may substitute any text you like for the "Placeholder Text", as it is called, in Pages. Click on the existing placeholder text and type something more to your liking. Do this in as many places as your particular template of interest demands. Then, Format > Advanced > Define as Placeholder Text. Lastly, File > Save as Template.
    Now that you have defined a Custom Template to your liking, you can go to Pages Preferences and under the General tab's first section, define the new custom template as your default for each new document.
    Regards,
    Jerry

  • [Solved] Change default leaf background when unlocking screen in Gnome

    This is kinda silly, but how do I change the default desktop background when unlocking screen in gnome?, its always that annoying green leaf background, how can I make it my wallpaper instead?
    Last edited by daf666 (2009-06-13 12:35:29)

    See the Gnome_Tips wiki article which contains the answer to this and other questions
    Change the Default Background Image
    The default background is that zoomed in picture of a green leaf. It appears for newly created users, but more importantly, this is the image shown when the screen is locked. As of 25-Apr-2009, you can find this image here
    /usr/share/pixmaps/backgrounds/gnome/background-default.jpg
    To change it, simply copy your favorite image to this locate (as root) and rename it.

  • Changing Default Gateway in Zone

    I'm alittle confused and embaroused to even post this. But, is there a restriction on changing the default gateway within a Zone? I get told I don't have insufficient privileges if I do it via "route". I even tried using /etc/defaultrouter, but that had no effect. Am I hitting a restriction that I was unaware of?

    Local zones are not allowed to change the network
    configuration at all; that includes the interface
    configuration (ifconfig) and the routing table
    (route).
    If your local zone is on the same subnet as the global
    zone, they can use the same default route (configured
    in the global zone). If they're on different subnets,
    you can configure two default routes in the global
    zone, and each zone will use the correct gateway.
    We have an open RFE to be able to set default routes
    in the zone configuration. It's unlikely that it'll
    make it into Solaris 10 soon though.
    Hope this helps,
    BlaiseThis sounds like it's independent of zones. I.e. if I only have the global zone and I have eri0 with 192.168.1.5/24 and qfe0 with 10.1.1.10/24 and then have two default gateways 192.168.1.1 and 10.1.1.1, it will pick the appropriate default gateway based on the src ip address of the outbound packet?
    If so, is this a new feature in Solaris 10, or do you know if previous versions also have the same behavior? Unfortunately the current available documentation out on docs.sun.com is not very clear on this (and since Solaris 10 is in beta, that's understandable). I've actually run into a couple of situations where this would be quite useful, so it'd be nice to know if I have to wait for Solaris 10 to be released or if its something that can be done today (I have no place to test this unfortunately)

Maybe you are looking for

  • Error while assigning Vo attribute dynamically.

    Hi All, I am creating advance table dynamically where i am assigning vo attribues to the items dynamically based on some setup. For few columns i am getting the following exception and for others its working fine. Please let me know what is the cause

  • Help! Tampered with files-can't open photos in iPhoto any longer

    I was doing some stuff with my Photo folders in the Finder, accidentaly deleted some and even after dragging them out of the trash I can't view my photos in the iPhoto anymore. What do I do? All the pictures are still in the Finder folders but iPhoto

  • HT1386 iOs6: syncing doesn't work as promised

    After wasting a lot of time with Apple client support, I decided to address my problem here. Upgrading to Ios6, can't enjoy my iPod anymore, as I can't watch/listen to my mp4 files. Any advise? I needed for study, therefore would highly appreciate an

  • Get a movie clip into a presentation

    I am very new to Apple community and just purchased Keynote. I have a Knote presentation and want to use clips from movies i.e. "A Beautiful Mind" to help teach about psychiatric issues. Can this be done? I just read about CINEMATIZE 2, but I am not

  • AudioRenderer.dll Crash

    AudioRenderer.dll Problem signature:   Problem Event Name: APPCRASH   Application Name: Adobe Premiere Pro.exe   Application Version: 8.1.0.81   Application Timestamp: 5426694c   Fault Module Name: AudioRenderer.dll   Fault Module Version: 8.1.0.81