Should display both Spanish and English lang. at a time in BEx analyzer

Hi All,
I need to display both Spanish and English lang. in Bex analyzer.
InfoObject is language dependent.
Ex: For material it should display description in Spanish and English at a time.
Am only able to display one at a time.
Please suggest.
Regards,
Sandeep.

Hi Sandeep,
As Kodandapani mentioned it’s not possible to display both languages same
time as its mapping to same T table where LANGU is part of key.
I recommend you to create an attribute or maintain another table for other
language to display at a time.
if anybody get any better ideas then pl share.
Regards,
Naveen Kencha

Similar Messages

  • I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?

    I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?...HELP!!!

    jedimaster Master wrote:
    how do I do both?
    By choosing SET UP for the "automatic" item at the bottom of the list I referred you to earlier

  • I want to display the both Hindi and English font in single text object

    hi...
    my problem is i want to display both Hindi and English font together in a single text object...
    the data is retrieved from Database in detail section...
    is there any font which supports both Hindi and English font for single text object...
    help me...

    hi Vinayak,
    If I understand your requirement, your field has full length word.
    Now we should split this field into 3 parts.
    Please Create 3 formulas.
    Part1
    stringvar s1;
    s1:= left({field}, InStr({field},"("));
    s1;
    Part2
    stringvar s2;
    s2:= Mid({field},InStr({field},"(")+1 ,InStr({field},")")- InStr({field},"(") -1);
    s2;
    Part3
    stringvar s3;
    s3:= Mid({field}, InStr({field},")"));
    s3;
    Now Place  a Text box in required section. Drag these 3 formula fields into the Text box.
    Right Click the Part2 and apply mangal font.
    Right Click the Part1, Part 3 and apply Arial font.
    I have tried this and implemented successfully. Please let me know if you still face any issue.
    Regards,
    Vamsee

  • Want to display the both hindi and english font in single text object

    hi...
    my problem is i want to display both Hindi and English font together in  a single text object...
    the data is retrieved from Database in detail section...
    is there any font which supports both Hindi and English font for single text object...
    help me...

    hi,
    Is your single Text object contains combination of two strings?
    for example:
    {State}{City}
    If yes,
    Right Click the 1st string object within the Text box and 'Text Formatting' specify the  Hindi Font
    Right Click the 2nd string object within the Text box and 'Text Formatting' specify the  English Font.
    Regards,
    Vamsee

  • Both Chinese and English in running header

    Hi-
    I have mixed Chinese and English in my book without any problems. However, I have one heading with both Chinese and English and the Chinese characters will not show in the running header, only crossed out squares.
    Got any ideas? Lars

    I'm back for a bit before I go out to walk the dog.
    I've been looking at the screen captures you provided, and I'm almost ceertain I know what the problem is. I don't have the LiSong font, though, so I'm not 100% sure.
    It looks to me like you are using a combination of the LiSong and Arno Pro, with your English text set in Arno Pro and the Chinese in LiSong. That's fine so far, it will probably also be OK if you are using LiSong for the English in the body text, too.
    In your running headers you've switched to an italic font, and, I think, therein lies the problem. I'm certainly not versed in typesetting Chinese, but my understanding is that there are no italics, and it looks to me like the entire running header is set in Arno Pro italic. Arno Pro does not have any Chinese glyphs, so you get the x-boxes. If you select the variable for the chines text and change the font to the LiSong I think they will go away and your correct glyphs will return.
    Also, it looks like you have the header repeating because you've got both the two character style variables and aparagraph style variable. You don't need the last one if you use the first two.
    And finally, and I probably should have mentioned this earlier, the character styles applied to this text don't necessarily need to do anything at all tothe formatting to work for defineing variables, as long as they have unique names. This allows you to name different parts of a paragraph without affecting the text in any way, but you can then apply separate formatting to your individual variables. In this particualr case, if I'm correct that you are using ArnoPro for the English and LiSong for the Chinese in the body text, it's probably appropriate to create a "Chinese" character style that includes the LiSong font (but not a size or color so you can apply it anywhere in your text and it will match the surrounding type except for the face), and an "English" style that is only a name.

  • Read in spanish and english

    Hi, my question is simple. I want my Mac to read text both in spanish and english.
    I installed the OS in spanish and when the Mac reads text in spanish it is all fine, but of course when reading text in english it sounds terribly as it reads it as if it were a spanish text.
    Is there any way to make the Mac read well in both languages?
    Thanks! I hope very much your answers.
    P.D.: MacBook Pro Retina, late 2013, OS X Yosemite.

    GGo to the system preferences for Speech and change the System Voice to an English one.

  • How to install photoshop cc in several languages, Spanish and English

    How to install photoshop cc in several languages, Spanish and English, I've searched the forums, and I have not been able to make or find would be so kind as to explain how I can do, thank you very much

    In
    Re: Change language?
    PECourtejoie posted this Link:
    Installing Multiple Languages of a Desktop Application | CS6 & Creative Cloud Feature Tour for Design | Adobe TV

  • Mail crashes when trying to attach a filename with both Hebrew and English

    Mail.app crashes when trying to attach a file whose filename has both Hebrew and English characters in it.
    This even happens if the file is first zipped!
    Any temporary solution/workaround until Apple fixes this bug?

    This report is about the Flash plugin:
    *bp-f13d802e-81d7-48fb-b101-ecdd22130310 3/9/2013 8:00 PM
    Make sure that you have the latest version of all plugins.
    *http://www.mozilla.org/plugincheck/
    *http://www.adobe.com/software/flash/about/
    *http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
    You can check for problems with current Flash plugin versions and try these:
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting
    *http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

  • When will Smartview support display both aliases and members?

    In the Essbase classic add-in, users had the ability to display both aliases and member names. When using Smartview with Essbase, this isn't supported. Are there plans to add this back? Thanks.

    I heard this is the most requested parity feature of the addin, that Oracle may be doing this sometime in 2010 since it is a complicated fix.

  • Gramatical corrector in spanish and english

    How do I install a grammatical corrector in Spanish and English, so when I'm writing a MSG or in Words I can correct the spelling, right now it only works in English

    GGo to the system preferences for Speech and change the System Voice to an English one.

  • E55 Spanish and English

    I'm not allowed to discuss how to get my phone working with Spanish and English here (there's a certain product code that you change to do it). 
    So my question is, 
     how do I get my phone working in Spanish. 
    I wasn't told this when I bought it. It cost me £200 and now 4 months down the line when I come to use the second language I find it doesn't write in the language I need. 

    To get any language that did not come with the phone originally, you will have to take it to a Nokia Care point to get it installed. Only Nokia care points can install additional language packs. It might cost a small fee.
    What youre planning to do will void your warranty and may also damage your phone. I suggest you don't do it.

  • When ordering MacBook, does the keyboard come with only the language I specified, for example Arabic, or both Arabic and English?

    I'm planning to order a MacBook Pro from the apple store, but I was wondering if I order it with an Arabic keyboard, does the keyboard buttons only contain Arabic, or do the buttons contain both Arabic and English?

    RSBR wrote:
    I'm planning to order a MacBook Pro from the apple store, but I was wondering if I order it with an Arabic keyboard, does the keyboard buttons only contain Arabic, or do the buttons contain both Arabic and English?
    The buttons contain both Arabic and English.
    All keyboards with non-Latin scripts printed on them also have English printed on them.  Otherwise you could not type email and webpage addresses and the computer would be of very limited use.
    You can see the actual keyboards produced by Apple at
    http://support.apple.com/kb/ht2841

  • Can I use both cs and cc at the same time?

    Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

    Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
    Regards
    Kasper

  • Use one external harddrive on both pc and mac at the same time

    i bought an iomega external harddrive today
    can i use it on both mac and pc at the same times?
    for ex:
    when i plug in both computer
    i could able to read and write on the hdd on both computer
    since i format it into 4 partitions (2 journal and 2 doc)
    so i wish i can use them separately in 2 computers

    Hi Jerry_L and welocme to Discussions,
    using such USB or Firewire connected external harddrives with two computers at the same time is usually not recommended by the manufacturer.
    Doing so might lead to data-loss and the like.
    Check with the manual of that harddisk to verify.
    Using it with one computer at a time with your partitioning should be doable.
    Regards
    Stefan

  • Can we use both INSERT and UPDATE at the same time in JDBC Receiver

    Hi All,
    I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
    user send the file which contains both new and old record and I need to save those in MS SQL database.
    If the record exist then use UPDATE otherwise use INSERT.
    I looked on sdn but didn't find any blog which perform both the things at the same time.
    Interface Requirement
    FILE -
    > PI -
    > JDBC(INSERT & UPDATE)
    I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
    Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
    Thanks,

    Hi ,
              If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
    "If the record exist then use UPDATE otherwise use INSERT."
    Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ...  where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows  you proceed with "insert into tablename....." since there are no old records present in database.
      Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database.  A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
    http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
    http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
    [ This part you can ignore, Since its not sure that you will face this situation
        Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
    http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
    http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
    http://www.faqs.org/docs/ppbook/r27479.htm
    http://msdn.microsoft.com/en-US/library/ms187373.aspx
    http://msdn.microsoft.com/en-US/library/ms173763.aspx
    http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
    http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
    http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
        There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
    regards
    Anupam

Maybe you are looking for