Should I auto update iTunes and Quicktime?

the System update asks me to update iTunes and Quicktime but I think the versions are incompatible to this version.
This computer is old dog slow. Would it be slower if i upgraded to the latest OS? Is it even possible.
Thanks.
Will

i appreciate the help
problem still persists

Similar Messages

  • When i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    when i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
    After iTunes & Quicktime are uninstalled, try the update again.

  • Exception processing message 0xc0000013 after updating itunes and Quicktime

    After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
    I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
    I'm using Windows Vista and this is driving me nuts.
    Any help would be greatly appreciated.

    I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
    . It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

  • Updated iTunes and QuickTime, now neither will launch

    I installed iTunes 7.1 and QT 7.1.5 tonight. Immediately after restarting, I was unable to launch Firefox 2.0.0.2 or reinstall it. In researching that problem, I've discovered I cannot launch iTunes or QT Player.
    With each app, the triangle appears next to the icon in the dock when I launch it, but then the color wheel spins for awhile, the system hangs, and the application stops launching. There's no error dialog. The Finder appears to restart, too, because the Dock and the Finder bar disappear and reappear.
    Any suggestions for what to restall, which files to trash, etc?
    Thanks.
    MacBook Pro   Mac OS X (10.4.8)  

    TD, thanks for the suggestions, but I'm still stuck. Here's what I've tried:
    1. Deleted the com.apple.iTunes.plist file, restarted iTunes and it would not launch.
    2. Created new account, tried launching iTunes. It did not launch.
    3. Downloaded and reinstalled iTunes and QuickTime, then restarted. iTunes, QuickTime, and Firefox would not launch.
    4. Re-reinstalled iTunes and Quicktime, restarted, still unable to launch iTunes or QuickTime.
    Any further ideas? I'm stumped! Thanks.

  • HT1926 I've successfully updated itunes and quicktime on windows XP but itunes won't run properly, the video tutorial loses audio after about 1-2 minutes and when I plug in my iphone 4s to sync the whole thing freezes, any ideas?

    Hi everyone,
    was prompted to upgrade itunes on my PC and also upgrade the software on my iphone 4s.Went through as usual but took 3 goes to get a successful upgrade of itunes on the PC. Then was prompted to update quick time, this was done successfully.
    Thought I'd look at the tutorial video for itunes - the sound went off 11/2 minutes into it, then I couldn't stop it. I had a quick look around itunes and decided to sync my phone. The program recognised the phone then everything froze. Windows message for a non responding program came up and had to pull out of the program. So far after several hours I have not been able to get beyond stage 2 of 7 of syncing the phone; it keeps freezing up at different stages.
    Any ideas?? I haven't had this kind of trouble before with any other version of itunes.
    Cheers

    Still nothing? Wow... maybe the quality of this discussion board really has gone down. Dissappointed.

  • New ipod nano and error in updating itunes and quicktime (error 1905)

    this is really annoying me, i have itunes 6.0 or 6.1 or something, and i recently purchased an ipod nano.it said the new nano was only compatable with itunes 7.1, so i went to apple.com and downloaded it. it took two hours to download the set-up for itunes 7.1. i ran the set-up, and then in the middle of it this error came up:
    Error 1905.Module C:/ProgramFiles/Quicktime/GTUIPanelControl.dll failed to unregister. HRESULT -2147220472. Contact your support panel.
    i pressed okay twice, and it went through the rest of the process and it says this:
    Could not open key:
    HKEYLOCALMACHINE/Software/Classes/QuickTime/CLSID. Verify that you have sufficient access to that key, or contact your support personel.
    all of this is very frustrating, but after i click "ok", it reads this:
    The installation of QuickTime did not complete successfully.iTunes requires QuickTime.
    Please help!i would like to utilize this ipod sooner than later, obviously.
    thank you

    http://www.microsoft.com/downloads/details.aspx?FamilyId=0A8A18F6-249C-4A72-BFCF -FC6AF26DC390&displaylang=en
    I used that download, which seems to have worked for some people, but not others. It has something to do with downloading a VBScript. Anyway, I did this, but when I tried to complete its download, it said "Error registering the OCX C:\WINDOWS\system32\vbscript.dll"
    I then tried to run that file through Run, typing in "regsvr32 %SystemRoot%\system32\vbscript.dll"
    I was told it would "reregister" it. Unfortunately, I was met with other error message. ""DllRegisterServer in c:\WINDOWS\system32\vbscript.dll failed. Return code was 0x80004005"
    I was told that it had something to do with not having adminstrative privilegdes. I've dealt with these "adminstrative priviledges" before when Norton refused to work, and its no happy mess. But if someone can shed any light on the situation, that would be great.

  • Auto Update iTunes and iPhoto

    Hi,
    I am storing my MP3s and JPGs on a NAS system, and I access these files from my MP, as do my wife from her MA. We both "imported" the files into iTunes and iPhoto, without "copy to iTunes library" and the "copy items to the iPhoto library" checked.
    So, now when I add files, how do I make sure that my wife's iTunes and iPhoto also sees these new files? Is there a way to continuously scan my NAS for added files?
    Thanks in advance for any advise/suggestions.

    Hi,
    The idea looks good, but I can't get it to work. I create the script, enable folder actions, and attach the created script, but when I add MP3 files into that particular folder, nothing happens. Also, I guess it only works with the specific folders I attach the script to, and not the subdirectories etc.?
    Any suggestions?

  • Problem updating itunes and quicktime

    i try to update my itunes/quicktime an error occurs that says that "The older version of QuickTime cannot be removed. Contact your technical support group." i tried deleting it many different ways and it will not work
    any help would be greatly appreciated

    Hi,
    Have just cured my problem. I went delvinginto these archives and found a link (see below)
    http://docs.info.apple.com/article.html?artnum=93976
    I did all that - themost important bit is the bit about the Windows Installer Utility. This seemed to cure things for me. After following those instructions, I went into my "Add/Remove programs" control Panel utility and removed the extraneous Quicktime entry, which at last, finally removed itself (after doing the bit about the Windows Installer Utility) and then restarted the PC. After that, I installed the standalone Quicktime installer, which worked! Then I installed iTunes (which probably re-installed QT over the top of itself, but hey, what the **** - it worked!).
    So I'm a happy bunny.
    CHeers,
    Sibrewer01

  • I can't update itunes and quicktime

    when i try to, my windows 7 64-bit system asks me for the msi-files of the installed versions, in order to uninstall them.
    i tried to find them on the internet, but sadly only the new versions are available.
    i'm out of options, please help me!

    i appreciate the help
    problem still persists

  • Applications won't open after update to iTunes and QuickTime

    I just allowed a software update for iTunes and QuickTime. After rebooting, I found that the Finder will not start, nor Mail nor most other applications. TextEdit will start, which gives me the Menu bar so I can switch users, but all users have the same problem.
    I cannot see the hard drive icon without the Finder. If I hit the Finder button, it wiggles and then dies. Safari starts, but "quits unexpectedly" when I try to browse with it.
    I bought the G5 with 10.2 installed, then upgraded to 10.3 I have the 10.3 upgrade disks, but don't know if I can use these to do an archive and re-install.
    I can see the hard drive by doing an "open" from TextEdit, but of course I can't use that to open another application. I've booted of the 10.3 upgrade disk and used Disk Repair, but it found no problems. Lots of permissions problems, but I doubt that is causing the trouble.
    I'm in a real fix here. Any suggestions?
    Thanks,
    Ray
    G5 Mac OS X (10.3.9) )
    G5   Mac OS X (10.3.9)  

    I'm having a similar problem only with disk utility after updating iTunes and Quicktime. I am unable to repair permissions, but otherwise the machine is working great as before. When I try to repair permissions using either Cocktail or Onyx it just keeps going, going, going and going but never finishes. It will run for several hours before I have to force quit the application. Repairing permissions has never taken more than 15 minutes prior to this update.
    I decided to try using disk utility while booted to osx, I get a message that says communication between the disk managment tool and disk utility has been lost and operation cannot continue. The same error occurs when running disk utility off the startup cd. I restored using my backup then ran disk utility and all was okay using all of the methods mentioned above. I installed the updates again and the same problem occurs when trying to repair permissions.
    Guess I will reload my backup and wait for a fix from apple unless someone chimes in with ideas on what could be wrong. Thank goodness for backups!!! This is the first software update that has given me any problems. Oh, one other thing. I installed the updates on my titanium powerbook running 10.3.9 and didn't have any problems. The setup on my tibook is essentially the same as my powermac G4. What gives? Anyone else having problems after installing the updates?

  • Video Playback in iTunes (and Quicktime) All White

    Since I updated iTunes and Quicktime, playback of all videos in them is now white, with a few dots of colour and just audio playing through.
    Is there a solution to this yet?
    Thanks - Dan.

    The iTunes store writes, "All TV shows and other video content are now available in 640-by-480 resolution." And, QuickTime Tech Specs page, says the following.
    For viewing videos purchased from the iTunes Store:
    (Windows)
    2.0 GHz Pentium-class processor or better
    512MB of RAM
    32MB video RAM
    QuickTime 7.1.3
    Windows 2000 or XP
    For viewing 640x480 standard definition (SD) H.264 video:
    (Windows)
    2.0 GHz Intel Pentium class or better processor
    At least 512MB of RAM
    64MB or greater video card
    Windows 2000 or XP
    I don't know how much VRAM you have on your terminal, but it looks like you need a faster machine as far as CPU is concerned.
    Good luck
    MacHouse
    180 video tutorials for Mac users

  • Deleting Unnecessary iTunes and Quicktime Files

    Having installed and subsequently updated iTunes and Quicktime (with both programs being parts of one update "package"), I believe I may have many unnecessary files on my machine which Apple's installation and updating processes did not throw out or which are created when the programs are used but not thrown out after usage.
    Can you tell me if I can safely delete the files in the following folders?
    In the location C:\documents and settings\all users\application data\apple computer\installer cache\, the files in the following folders, which together use up 92MB of disk space: Apple Software Update 1.0.2.1, iTunes 7.0.2.16, iTunes 7.1.0.59, QuickTime 7.1.5.120.
    In location C:\documents and settings\myname\local settings\application data\apple computer\quicktime\downloads\, the set of folders and subfolders which collectively contain 37MB of files with the extension .qtch.
    Thanks.

    Thanks for your reply, but what you're referring to has absolutely nothing to do with the problem I described in my post. You described how to change the display language WITHIN iTunes. My problem is the target and name of the start menu shortcut "Om iTunes", which on my PC opens a Swedish rtf file. Changing the iTunes language does not change the name and/or target of the shortcut.
    The problem is that the iTunes (and QuickTime) installers assume I understand Swedish if my English Windows XP PC is configured to use Swedish date, time and currency formats. This is not necessarily the case, as I tried to explain in my original post.

  • Trouble update itune and Quictime

    Can anyone help me with this issue:
    Tried update itune and Quicktime, but keep getting the following errors:
    -C:\program File\Quicktime\QTsystem\QT Java.dll
    (file not found)
    -Error code: -3
    When attempting open iTunes get the following error:
    Quicktime 7.0.02 installed, Need Quicktime 7.0.3 or later. Reinstall iTunes.
    Tried several things with no change. Don't have access to my music on iTunes any longer. Can someone help me? Thanks!
    Update:
    Still can't get itune or Quicktime to work. Frustrated and tried everything I can think of.........Does anyone have any ideas!

    http://www.apple.com/quicktime/download/standalone.html
    That's the Standalone installer for Quicktime 7.0.3, without iTunes bundled in. Attempt to install that after a computer restart, then restart again and try to launch iTunes (assuming the installation goes through without errors).

  • HT5654 iTunes auto update downloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried uninstalling and downloading/installing again to no avail. Any clues?

    iTunes auto-update dowloaded and installed on 28/01/2014. iTunes now won't launch and error message states file MSVCR80.dll is missing. Tried unistalling and downloading/installing again to no avail.  Any clues?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99269)

  • ITunes and Quicktime Error after automatice Apple update, need help!!!

    So I currently have a new labtop with windows vista. I have been runining iTunes for the pass 3 months already no problems. The Apple automatic update has never caused any problems till now. Quicktime needed to be updated today, and I accecpted the update, prior to that iTunes and Quicktime was working properly. Once the quicktime update was complete, it restarted my computer like usual. Then when I tried to open iTunes this error came up:
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Now I checked the audio configuration and nothing was changed or anything, that has not been touched at all, so I still think it had to do with the update. The next error was came up when I tried to open Quicktime and it read:
    "Runtime Error!
    Program C://ProgramFiles/QuickTime/QuickTimePlayer.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information"
    So as long as I have been using Quicktime and iTunes I have never encountered this, I tried to re-install but the error kept coming up after it was installed. Please help me out!

    try doing following the steps in these articles
    http://docs.info.apple.com/article.html?artnum=31115
    and
    http://docs.info.apple.com/article.html?artnum=93976
    hope this helps

Maybe you are looking for

  • Apple TV country compatibility

    My cousin intend to give me his Apple tv which he purchased it from USAand that I'm from Malaysia. Will the Apple TV work? Any comparability issues? Power supply socket

  • Will upgrading to new version of itunes delete my last iPad backup?

    will upgrading to a newest version itunes delete my last iPad backup? I am currently running 10.5.0.142 and just installed iOS6 to my iPad2 and was prmpted to do a restore.  Only problem is ituntes says I can't sync up my back up until I install the

  • Ping not using FQDN

    Hello, I'm having an issue with one user (Windows 7 32bit, IE 9) that when he tries to ping one of our servers, for example:  ping can6800vm031.  It pings can6800vm031.abc.com instead of pinging can6800vm031.na.abc.net (abc is our company name).  Thi

  • How to compile and run a matlab program?

    Hi, I have a college matlab code that i want to compile and run and take an output of. Can anyone guide me with this in xcode? Neerav

  • Difference table size values

    Hello Experts, I want to know the sizes of some tables (e.g. TCURR). In different threads the transaction db02old and the function module 'DB_GET_TABLE_SIZE' are mentioned for that purpose. I wonder that using these methods two different sizes are Us