Should I be able to have PS, LR an BR open at once?

My system is so painfully slow since I started using CC this way. Sometimes I can't even get the brush, burn, dodge and other tools to appear at anything, but a little cross no matter size chosen. Below I've pasted my system info. Is it a hardware problem, or should I be looking at something else? Thank you!
OS Name
Microsoft Windows 7 Home Premium
Version
6.1.7601 Service Pack 1 Build 7601
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
RFS-OFFICE
System Manufacturer
HP-Pavilion
System Model
NY549AA-ABA p6230y
System Type
x64-based PC
Processor
AMD Phenom(tm) II X4 810 Processor, 2600 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. 5.03, 9/11/2009
SMBIOS Version
2.6
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
Time Zone
Eastern Daylight Time
Installed Physical Memory (RAM)
8.00 GB
Total Physical Memory
7.74 GB
Available Physical Memory
1.07 GB
Total Virtual Memory
15.5 GB
Available Virtual Memory
4.30 GB
Page File Space
7.74 GB
Page File
C:\pagefile.sys

Thanks for the reply JJ,
Looks like my graphics card is dragging me down. I guess that could make a big difference? The weird thing is I noticed that the last time it was updated was back in 2012 before I was using all these programs together and had the exact same score. Any more suggestions would be appreciated. Thanks again!
Component
Details
Subscore
Base score
Processor
AMD Phenom(tm) II X4 810 Processor
7.2
4.5
  Determined by lowest subscore
Memory (RAM)
8.00 GB
7.5
Graphics
ATI Radeon HD 4200
4.5
Gaming graphics
3067 MB Total available graphics memory
5.4
Primary hard disk
286GB Free (686GB Total)
5.9
Windows 7 Home Premium
System 
Manufacturer
HP-Pavilion
Model
NY549AA-ABA p6230y
Total amount of system memory
8.00 GB RAM
System type
64-bit operating system
Number of processor cores
4
Storage 
Total size of hard disk(s)
2561 GB
Disk partition (C:)
286 GB Free (686 GB Total)
Disk partition (D:)
2 GB Free (12 GB Total)
Media drive (E:)
CD/DVD
Disk partition (F:)
896 GB Free (1863 GB Total)
Media drive (J:)
CD/DVD
Graphics 
Display adapter type
ATI Radeon HD 4200
Total available graphics memory
3067 MB
      Dedicated graphics memory
256 MB
      Dedicated system memory
0 MB
      Shared system memory
2811 MB
Display adapter driver version
8.862.3.0
Primary monitor resolution
1280x1024
DirectX version
DirectX 10
Network 
Network Adapter
Realtek PCIe GBE Family Controller
Network Adapter
Qualcomm Atheros 802.11 a/b/g/n Dualband Wireless Network Module
Network Adapter
VMware Virtual Ethernet Adapter for VMnet1
Network Adapter
VMware Virtual Ethernet Adapter for VMnet8
Network Adapter
Microsoft Virtual WiFi Miniport Adapter
Notes 
The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits.

Similar Messages

  • Can you have more than one profile open at once in FF 4?

    I'm having problems with Profiles but if I can't have more than one profile open at once then I guess that's why.

    Thanks, but I just found out about Tab Groups and I think I'll stick with them as they seem to be designed to solve my problem in an economical way. If I'm wrong please let me know!
    Peter

  • I used to be able to have different windows and tabs open in Firefox & if I quit Firefox, I was first asked "Save & quit?" so that all of my windows & their respective tabs opened again. After this last update it doesn't do that anymore. Why?

    Sometimes I have tabs open that I only need for a short time and I don't want to bookmark them. I want my windows & tabs restored as the were and I can't get this by simply restoring session after I've had to close Firefox for an update of something else on my computer.

    THANK YOU! So easy, now I feel stupid. ;)
    Sorry, Firefox 4.0 is driving me nuts in many ways, this is just one of them.

  • I used to be able to have several identical copies of Firefox open at once - not any more: they are significantly different and not useable Why??

    Since installing version 5, I am now unable to have multiple versions of firefox open at once. The original format is ok but other copies are different
    I have taken screen prints but cannot see how to send them to you

    You can't attach images to the first post in a thread, but you can attach screenshot images to sub sequent posts in a thread.
    Do you mean opening extra windows via Firefox > New Tab > New Window (Ctrl+N) ?
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems?

    I have a Macbook Model No A1181 2.4 GHz intel core 2 Duo with 4 Gb Ram. Should I be able to instal Final Cut Pro 3.0.2 cos I'm having problems? As I read it My machine should be able to run the software.
    Thanks in advance

    You are trying to use software that is over 10 years old. As I read it, FCP 3.0.2 required 10.1 or higher at the time, but as FCP is reliant on quicktime, which has been updated many, many times, I doubt that you will ever get it to work properly.

  • Should I be able to use MobileMe features if I have an iCloud account?

    I recently purchased an iCloud account. 
    Should I be able to post a webpage using iWeb with iCLoud?
    When trying to publish the page i'm asked to sign in to mobileme.  I thought maybe icloud would be sufficient.

    MobileMe closed over a year ago, and iCloud does not provide website hosting services. iWeb has not been updated for several years and is no longer sold or supported, so it still offers the non-functional MobileMe option.
    Up to and including iWeb '08, it was only possible to publish to other hosts by 'Publishing to a folder' and then uploading that local folder to a website host using a separate FTP client. From iWeb '09 an FTP method was built-in, making it easier to publish to a host other than MobileMe.
    In order to upload your existing site in iWeb '09 and above:
    Click on the name of the site in the sidebar: the publishing settings pane will open. Set 'Publish to' to 'FTP'. Enter the name of the site and a contact address (if desired).
    In the 'FTP Server Settings' section you will need to know the server address (your hosting service can tell you that), and your username and password for that service. Your site will be published in a folder with its name at root level of the server, with an index.html file at root level (which will overwrite any index.html file which may be there already). The 'Directory/Path' field may need to include a path such as '/webspace/' or 'ht_docs/' - this is dependent on your hosting service and they should tell you this. If you want to publish within a folder you can add that to the path.
    You can then click the 'Test connection' button so that iWeb can check that it can get access to your server space. You should enter the URL of the site in the 'URL' field so that rss feeds and internal links have the correct address.
    To publish using an earlier version of iWeb:
    From the File menu choose 'Publish to a folder'. You should create a folder somewhere convenient specifically for this and choose it when publishing to a folder: this folder should not contain anything else.
    You now need an FTP program (FTP is the 'protocol' used for uploading) to upload the contents of the folder to your server.Cyberduck is free (donation requested): Transmit is $34 but I think better. You will need the server address (your hosting service can tell you that), and your username and password for that service. You can drag the contents of your folder to your webspace, or create a folder there and drag the contents to that if you prefer.

  • HT5824 When I go to my I cloud accout I do not see my photo stream. I have check my I phone 5 and I have the photo stream I cloud back up on. Should I be able to see my photos when I go to my I cloud accout on line?

    Should I be able to see my photos when I go to my I cloud account? On my I phone 5 s I have the photo stream turned on , but cannot see any of my photos in the cloud

    No. Photo Stream is no accessible from iCloud.com.
    Photo Stream is meant to sync photos between devices and is not in the cloud storage.
    You may be able to access Photo Stream from your computer:
    Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
    PC with Windows 7 or later and the iCloud Control Panel 2.1 or later for Windows
    iCloud: My Photo Stream FAQ - Support - Apple

  • Should I  be able to use a Lexmark Pro 205 wireless printer from my iPad 1?  My iPad can't find the printer.  Iveinstalled the Lexprint app on iPad and downloaded the Lexmark Listener on desktop computer. Still can't print from iPad.

    Should I be able to use a Lexmark Pro 205 wireless 3 in 1 printer with iPad 1?  I have installed the LexPrint app on iPad, downloaded the Lexmark Listener on desktop computer but still can't print from iPad. My iPad cannot find the printer.  But I can print from desktop without USB cable. I upgraded the system on my iPad sometime ago.  Suggestions??

    Here is the list of AirPrint printers, and you particular printer is not on it.  So that means you will need to use the Lexmark app, and print through your computer.
    There is a Lexmark guy that hangs around these forums who may chime in with a response as well.
    http://support.apple.com/kb/ht4356

  • Can't log on with administrator user by finding the message "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.

    Hi,
    Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
    the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
    Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
    ++++++++++++++++++++++++++++
    Source: Desktop Window Manager
    Event ID: 9003
    Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: mmc.exe.
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: javaw.exe.
    ++++++++++++++++++++++++++++
    Source: Microsoft-Windows-Winsrv
    Event ID:10002 
    Detail: The following application was terminated because it was hung: Explorer.exe.
    ++++++++++++++++++++++++++++
    Source:Desktop Window Manager
    Event ID:9009
    Detail:The Desktop Window Manager has exited with code (0x40010004)
     ++++++++++++++++++++++++++++
    Source:Microsoft-Windows-Winlogon
    Event ID:6005
    Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
    ++++++++++++++++++++++++++++
    In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
    by we do not reboot the server?

    Hi,
    The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
    Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
    http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
    If the issue can always be re-produced, then I would suggest you fully patch the system.
    More information for you:
    The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
    https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Major heat problem. should i be able to hear the fans?

    my black macbook with 1gb ram is getting very hot when i use front row to play videos at full screen. after about 30-40 mins the left corner of the macbook is so hot i can only touch it for a second or so. then without warning the video just freezes. the picture remains on the screen but looks like it's paused. i then get the spinning colour wheel. the only way to rectify is to force a power off (force quit has no effect). i have to let it cool down for a while and try again. it works fine after that until it gets hot again.
    when it locks up, it is completely silent. should i be able to hear the fans working? there is no warm air being expelled from any part of the unit as far as i can tell. the case is just really hot.
    i ran a little experiment by pointing a desk fan at the notebook and it played fine for five hours without problems!!! the corner of the macbook was cool to the touch.
    this happens in lid closed or open modes.
    anyone else have this or is it time to call applecare?
    Macbook Black 1gb Ram 120gb HDD   Mac OS X (10.4.7)  
    Macbook Black 1gb Ram 120gb HDD   Mac OS X (10.4.7)  

    UPDATE
    ok, so we have had the firmware update and guess what?
    all seems ok now!!!!
    coreduotemp now reports 65 degrees after playing video at full screen. much better than the 85 degrees it was hitting. now when it gets hot i can hear the fans going. i ran a terminal window and did yes > /dev/null and after only a few seconds the temp was rising to 85-87 and the fans came on really hard and brought it to 68-70. no system stall yet.
    normal idle while using only safari over airport is between 41-45 degrees!!!!
    i am very happy so far. lets just hope it is the cure.
    many thanks for reading and replying.
    Martin.

  • Should i be able to see interlacing on the computer display?

    I'm trying to verify if i have things set up properly.
    If i'm working in a timeline that is DV NTSC and i've brought in elements from after effects and as well have moving images within FCP, should i be able to see the interlaced lines in FCP?
    It looks okay on the broadcast monitor but i'm trying to figure out if interlacing on ftg/renders should be visible on the cinema display.
    a simple yes, no and a sentence if you've got the time would be nice.
    thanks

    You can observe the presence of interlacing on a computer display only if the Canvas (or Viewer) are set to display 100% size and the video is paused. The interlacing will appear as a comb effect on moving objects. You can not observe interlacing with a computer display on running video.

  • Should i be able to replace my broken ipad in jeddha apple store?

    hi apple family
    i bought an ipad 2 from sydney apple store more than a year ago.it's no warranty since its been more than a year.my ipad screen has broken down after i have been Bangladesh.I have a plan to visit jeddha in the last of this month.should i be able to replace/fixup my ipad in jeddha apple store? looking for an authentic answer.
    Best regards
    Irfan.

    It should charge independetely from the fact that it you are watching videos or not (at least mine does), eventhough it might take longer.
    Are you sure the charger is ok? Mine started giving me some problems and it would charge some times and others it didn't. Therefore I thought it was the computer and not the charger (usually they just burn and death is a quick, not a process). Turns out it was some contact thing. I am sure that you established the right connection to the video watching, but maybe you just seat more confortable in the sofa and the contact is lower...?
    Also, people at the apple store did not encourage me at all to buy a more powerful charger. They said it is best to use the same power it came with...

  • Should I be able to see networked computers in Finder?

    Forgive me if this is totally obvious.
    Should I be able to click on Network in Finder and see networked PCs on my LAN? I can share and transfer files from a laptop to this iMac, but I don't have the laptop with me right now. I'm trying to see a different desktop PC right now. Under Network, then Servers, I only see iMac.local.
    I don't know if this is a problem or if it's just how things work...
    Message was edited by: FeatherM

    Hi,
    Yes you should see them if they are Sharing and on the same Subnet.
    If you know the IP of the other Laptop, try In finder, select Go menu>Connect to Servers..., then on the iMac, type in smb://ip.of.the.pc, like...
    smb://10.0.1.5
    smb://192.168.1.3
    Find IP on computers...
    http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/

  • Should I be able to see a priority change using a mutex priority ceiling

    If I have a program which uses a mutex lock in solaris 9 which is set up to protect/priority ceiling of 5 and kick it off using priocntl with a priority of 11 and RT, I can look at top and see that it has priority 111. So my process is running real time. I then use a second xterm and wait till the program hits the lock portion of the code. If I do a priocntl -d pid, it is still priority 11. I know it is in the lock because there is a printf and a sleep of 20 seconds. Should I be able to see the priority go to 5? How can I prove the priority inheritance off the mutex lock is working in a test program? Thanks for any insight.

    I also tried it with a priority ceiling of 50, figured out that RT priorities worked the reverse of regular priority, the higher the priority number, the higher the priority. I still however am not able to prove the priority inheritance occured. Anybody got any thoughts on how to prove it is working properly.

  • Should I be able to see a priority change using a mutex lock   ?

    If I have a program which uses a mutex lock in solaris 9 which is set up to protect/priority ceiling of 5 and kick it off using priocntl with a priority of 11 and RT, I can look at top and see that it has priority 111. So my process is running real time. I then use a second xterm and wait till the program hits the lock portion of the code. If I do a priocntl -d pid, it is still priority 11. I know it is in the lock because there is a printf and a sleep of 20 seconds. Should I be able to see the priority go to 5? How can I prove the priority inheritance off the mutex lock is working in a test program, so that I know I am using it correctly? Thanks for any insight.

    I also tried it with a priority ceiling of 50, figured out that RT priorities worked the reverse of regular priority, the higher the priority number, the higher the priority. I still however am not able to prove the priority inheritance occured. Anybody got any thoughts on how to prove it is working properly.

Maybe you are looking for