Should I be getting low on memory?

I have recently built my own desktop.
Specs:
nVidia GTX 760
i7-4770k
16gb Ram
I use after effects and photoshop in a pretty undemanding way (the most demanding thing I do is rotoscoping). However, when using premier pro (and after effects) I keep getting this error message
This just happened to me after about 20 minutes of editing 1080p 72mpbs footage. Timeline is only about 4 minutes long. The only think I was using was neat video.
Should this be happening? Is my ram underperforming? Any suggestions?
This is my ram, btw http://www.amazon.com/dp/B006YG9EEW/ref=pe_385040_30332190_TE_M3T1_ST1_dp_1

Something is leaking memory. Using it and not giving it back most likely.
If you reboot, the problem should go away. Then try to keep track of which programs are increasing in memory usage. Also, see if it works better without the Neat Video. Perhaps it is the cause of the leak?

Similar Messages

  • "Bridge is running low on memory and should be restarted" error

    I am running Bridge CS4 on a DELL T-1650 with plenty of hard drive space.  I am having trouble with indexing / caching files.  My computer is connected to a large office server with a large amount of files that I need to be able to search.  I recieve a "Bridge is running low on memory and should be restarted" error each time I attempt to index the files on the server drive.  I have tried Purge and Cache, set the cache memory slider to max.  This is a very large amount of files (TB ) to index /cache.  I leave the computer running overnight to allow ample time, I nothing on my TB hard drive , and have 16GB of available RAM.  Any ideas?

    …My computer is connected to a large office server…
    Aha!  Working over a network is not supported by Adobe.
    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
         Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • Why do I keep getting low memory errors when opening files in Bridge CS4? (New computer running i7 2.40GHz, 12GB RAM)

    Just picked up a new computer which has a lot more RAM than my old computer bu I keep getting low memory errors. Never had this issue on my old computer, any ideas?

    Windows or Mac?  (If the former, I can't be of any help.)  Exact version of your OS?
    How much available disk space?  Do you have a separate hard drive for Photoshop's scratch file?

  • How do I locate non picture files and location? I'm getting low memory and can't find word,PDF etc

    how do I locate non picture files and location? I'm getting low memory and can't find word,PDF etc

    iPads don't have a filesystem like a computer, Files of that nature must be associated with an App and reside inside that particular App's file space.  So the way to find them is to open the App that opens that file type and look in its file or document list for them.

  • My iPad battery getting low quickly when im playing games. What should i do ?

    My iPad battery getting low quickly when im playing games. What should i do ?

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • My Macbook Air SSD memory is getting low , if i delete the apps on iTunes, will this apps be deleted on my iPhones and iPads as well ?

    My Macbook Air SSD memory is getting low , if i delete the apps on iTunes, will this apps be deleted on my iPhones and iPads as well ?

    If necessary,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Bridge runs low on memory CS5

    Now I have a problem while working in photoshop and I open bridge if I open adjust and close a few raw images I get a message that says Bridge is running low on memory you should restart bridge.  I looked for a memory adjustment and can't find it.  Anyone know where it is?

    OK, what changed a week ago?  Did you add new hardware, add new software, updated any software, add any external devices? 
    If it worked before and not now, and the answer to the above is no, then reset the preferences by holdling down the Ctrl key and starting Bridge.  You will get a reset window with 3 options.

  • Adobe PDF (Low on memory)- E61

    I can't view video clips not documents.
    Can Someone in Nokia let us know if this device can be used as a PDA or we're bound to have only a large phone?
    Is there a way to free up memory on this device?
    Moderator's note:
    This message has been edited in order for it to have its own thread.
    Message Edited by gcpropulser on 24-Sep-2008 06:26 PM

    joe, did the procedure solve the low memo issue?
    "joe" <[email protected]> escreveu na mensagem
    news:fijs7c$9pl$[email protected]..
    > Thanks Dooza,
    > It was showing an adobe error page a while ago.
    > Seems fine :-)
    > joe
    > "Dooza" <[email protected]> wrote in message
    > news:fijriq$8nb$[email protected]..
    >> joe wrote:
    >>> Is the link working for anyone?
    >>>
    >>> "joe" <[email protected]> wrote in message
    >>> news:fijdgu$ntl$[email protected]..
    >>>> Hi,
    >>>> I keep getting a "low on memory" error
    running DW.
    >>>> I have 2G of ram and there should be no
    problem.
    >>>> I have found a couple of Adobe technotes but
    the pages will not load:
    >>>>
    http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=system+low+on+memory
    >>>>
    >>>> Anyone help?
    >>>> thanks
    >>>
    >>
    >> Yep it worked for me, showed me a list of results,
    here is the top page
    >> from the search results:
    >>
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400957
    >>
    >> Steve
    >

  • Low on memory, clear application data

    For a while now, I get a notification saying that I'm running low on memory (my cache has already been cleared for every app by the way.) At first I thought I had too many apps on my phone so I deleted a few I didn't really use & the notification went away.
    However, the notification has kept popping up, closer & closer together. I'm down to only having all the apps I absolutely use every day, & it still is giving me this low memory notification. I'm really fed up with it now, as this has been going on for a month, & I need a solution before I chunk my phone against the wall.
    Somethings I thought yall may need to know to fix the problems are: my facebook app was taking up 54MB, so I uninstalled & dowloaded the facebook for htc app; I use the Auto Memory Manager app to take care of my data, it is set on the aggressive mode; I text A LOT, I had my phone set to delete converations after they reach 200, but it hasnt been deleting automatically; I have two applications on my SD card, should I move some additional apps to the card to take care of the problem; lastly, on my running services, it says "Avail: 104MB + 158MB in 32," I'm guessing this means I have that much memory available so I want to know what the problem is.
    After I uninstalled & downloaded facebook, the notification disappeared, but I know this problem will most likely happen again so I would like to know how to fix it for good.
    Thanks for the help

    I have this problem, "lately" many many times. First I downloaded the "Cache Cleaner" app and use that. Then I delete my text messages. That seems to work ONLY if I happen to have  a picture on there that I downloaded to a friend. Then last, I go to settings, applications, manage applications, and go thru them and put what I can on the SD card. That seems to work. Its been about 3 days clean for me! lol

  • Contribute "low on memory" and Acrobat won't redraw

    I have two issues that I believe may be related.  First here's my system information
    WinXP SP3
    Intel Core2Duo E6550 = (2.33GHz)
    3GB RAM
    GeForce 8600GTS 512 MB Video
    Running two 19" monitors, (at 1440x900 each)
    Creative Suite Premium 2.0 (InDesign CS2, Photoshop CS2, IllustratorCS2, Acrobat 7 Professional, BridgeCS2, GoLive CS2Version Cue is disabled.)
    Production Studio Premium 1.0 (Premiere Pro 2, Encore DVD 2, After Effects 7, Audition 2)
    Contribute CS3, (including Bridge CS3, but I don't use it, I use Bridge CS2 for everything).
    First Issue.  Intermittently, in both Adobe Reader 9, and Acrobat 7.0 pdf files that I have open will not display in the window properly, unless I reduce the size of the window to something quite small.  It will show the desktop in behind the window, or if I open a window on top, it shows that window even when I've moved it.
    The second problem is similar, but occurs in Contribute CS3 and is always accompanied by a "Your system is low on memory..." error, until I reduce the size of the Contribute window, at which point, it is so small that it becomes unuseable.
    The only other program that I have open at the time is Outlook 2007, with a couple of messages.
    As this is happening, I open the Task Manager, see that there is plenty of available Physical Memory, and the CPU Usage is very low, under 10%.  I've set my virtual memory paging file to Custom Size of 4591MB.
    The only way to fix it is to reduce the size of windows or close all the programs.  These two problems occur independently of each other.  Sometimes when I'm just trying to open a PDF file.
    3GB should be plenty to run Contribute and Outlook, or Acrobat and Bridge.
    What the heck is going on?

    Thanks for the reply.
    Yes I have tried that, but to no avail.  The crazy thing is that it only really happens after I've been working in Contribute for a while.  Sometimes an hour or more.  Then it just starts doing this.
    The redraw problem also affects other programs, that are not Adobe programs.  For example, when I open a Remote Desktop Connection to the web server where I am publishing, while this problem is occuring, the screen will not "draw" properly either.
    I have a feeling that there is something strange about how Contribute, and Acrobat, and Windows share the memory, either the system memory, or the graphics memory.
    Could this also be a problem caused by having both CS2 and CS3 programs installed?
    Chris

  • Low system memory issue - caused by Mail?

    While I was at work, my wife was using our iMac at home, and she said that a weird error dialog appeared this afternoon that asked her to quit applications, following which the system became unresponsive.
    When I came home I found that a lot of running applications were in a hung state (unresponsive and required a Force Quit) so I rebooted the iMac.
    I looked in the Console and saw that at 15:39:37 today two errors started repeating at an enormous rate - something like 5000 times per second for the next 5 seconds:
      12/02/2015 15:39:36.373 Mail[226]: *** Assertion failure in -[MCSocket readBytes:maxLength:error:], /SourceCache/Mail/Mail-2070.6/MailCore/Networking/MCSocket.m:469
      12/02/2015 15:39:36.381 Mail[226]: exception parsing IMAP response: trying to read/write concurrently
    ...then at 15:39:42 the rate suddenly decreases to only about 10 errors per second. This continued for a further 15 minutes, until at 15:55:22:
      12/02/2015 15:55:22.000 kernel[0]: low swap: suspending pid 226 (Mail)
      12/02/2015 15:55:22.590 loginwindow[797]: -[ProcessPanel(lowMem) initAsLoMemPanel] | Lo-Memory panel initializing
    ...then lots of errors like this:
      12/02/2015 15:55:23.000 kernel[0]: memorystatus_thread: idle exiting pid 999 [com.apple.MailSe]
      12/02/2015 15:55:24.000 kernel[0]: memorystatus_thread: idle exiting pid 1000 [com.apple.InputM]
      12/02/2015 15:55:25.000 kernel[0]: memorystatus_thread: idle exiting pid 269 [com.apple.intern]
    So it looks to me like the Mail app went haywire, the Mac ran low on memory, so OS X made some kind of "Lo-Memory panel" appear to handle it.
    A quick search in Google Images revealed that there is such a thing as an OS X low memory error - the exact text of which is "Your system has run out of application memory. To avoid problems with your computer, quit any applications you are not using". It displays a list of running apps so you can quit them. The error looks something like this:
        http://i.imgur.com/HDplIwv.jpg
    When I showed this picture to my wife she said that is exactly what she saw.
    I will report this to Apple on their feedback page. If anyone has any other suggestions let me know. Obviously something that can bring down the entire system like this is not good.

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

  • I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution.  When I go to share the DVD to disc the form only offers 8pixels at the bottom.  How do I burn this DVD in HD with higher number of pixels?

    I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution.  When I go to share the DVD to disc the form only offers 8pixels at the bottom.  How do I burn this DVD in HD with higher number of pixels?  I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended.  I want my DVD to be HD so I may sell these videos online for my business.  I can't sell them the low quality they are burning now.  Hopefully you can help me.  Thanks.

    desalvom
    Thank you for your reply.
    You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
    that will replay through a regular DVD player. But players are marketed under a variety of names with
    different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
    etc.The bottom line is the specifications for each of the players that are candidates for the playback of
    the AVCHD format on DVD disc or the format of interest.
    If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
    But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
    HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
    at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
    Best results depend on you
    a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
    you have 1080p source, you (manually) or the project (automatically) set the project preset at
    NTSC
    DSLR
    1080p
    DSLR [email protected]
    or the PAL counterpart, depending on your region need.
    b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
    customize it.....if you need customization, then you can export your Timeline to a file...in this example
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
    and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
    the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
    Then you would upload that file to YouTube at the YouTube web site.
    All of the above are factors that need looking into in order to determine the why for what you wrote
    I have published a shortened advertisement video to YouTube- say 5 minutes-
    and it is low quality
    Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
    the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
    Thank you. As always, any clarification needed, please do not hesitate to ask.
    ATR

  • Why am I getting an insufficient memory error in Illustrator?

    I am getting an insufficient memory message on my illustrator program when I try to work on a particular document.
    I remember long ago when I used to install my programs on my Mac there were memory settings for the graphics programs.
    Does the pc work the same way? I am really at a loss as to why this error is coming up. In 5 years of working in Illustrator on the pc here, I have not gotten this message before now.
    Now I get a new laptop and suddenly I get these errors. I am using Adobe Illustrator CS4 14.0.0 on a new Dell Inspiron 6400 running Windows XP with the latest service pack and patches.
    Is there a memory setting in the application I should be looking at?
    Steve

    you didn't mention about the job size do  u working on small scale and about how much ram you are using currently, mostly these type of errors occurs when you are mutitasking and working on big file sizes in illustrator

  • HI my mac is low on memory and i want to erase some apps that i don't use in the iTunes media folder that i have already eraed from itunes

    HI my mac is low on memory and i want to erase some apps that i don't use in the iTunes media folder that i have already eraed from itunes
    how do i erase them without going one by one checking names???

    There is no way to automatically select the unused apps.  But, you can go go through your apps library and hold the command key as you select each app you want to delete to get them all at once.

  • Excel 2011 version 14.4.8 running on an iMac gets "out of memory" messages.

    HELP!!!   Excel 2011 running on an iMac with OS 10.10.2 and 16GB Ram gets "out of memory" messages.  When I monitor processes with "Activity Monitor", I am using less than half of my RAM.  The Excel workbook has many sheets and also some macros.  The basic workbook has been running for about two and half years starting in August 2012 without any problems until I upgraded to Yosemite in early December 2014.  Now I often have to restore the entire file content because it gets corrupted after not being able to save the file because of the "out of memory" message.  I can take a file and its content that ran fine a year ago and run it today and it will eventually get corrupted and get the "Out of memory" message after saving/quitting/re-opening the file any where from 6 to 15 to 25 times.  I think I need to have more memory allocated to Excel, but Yosemite doesn't provide any way for the user to interact with the memory management process.  I have also experienced the very same problem on my MacBook Pro that runs Yosemite.  I have worked file/path name length issues, closely inspected the macros that normally don't run except when activated with a user pressed button, and made sure I don't have any weird links within the workbook or even links to another file outside the workbook.  This problem seems to get worse as a continue to fill up the spread sheet with more financial data.  This Excel workbook is used to manage my club's finances; I am the club treasurer.  I have searched the internet for clues about similar problems and have found none!
    My iMac is a 27-inch, Late 2009 with a 2.8GHz Intel Core i7 Processor.  It includes 16GB of 1067 MHz DDR3 RAM.  The hard drive is a fussed 1TB rotating HD with 128 GB SSD.  This hardware has been running for about 27 months.  I am a very advanced Mac user that programs Excel and Filemaker and repairs Macs for others.

      I am a very advanced Mac user that programs Excel and Filemaker and repairs Macs for others.
    I am a not a very advanced Mac user that uses programs like Excel and Filemaker and avoids any repairs of Macs for others
    Given the caveat, have you tried reinstall of Office? Your MS Office 2011 may have become corrupted.  After upgrading to Yosemite I had to reinstall my Office 2011.  No crashes.
    The current version of Office 2011 is 14.4.8.
    First - find your Office 2011 install disc with the product key # - and only then remove Office according to MS instructions
    http://support.microsoft.com/kb/2398768
    Or go here to DianefromOregon's site for help removing Office 2011:
    http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/
    Then Reinstall from DVD
    Then enter your Product #
    After successfully reinstalling Office 2011,  update your Office product using the Software update within Office called Microsoft Update or going to the Help menu within Word or Excel or PowerPoint and select Update.
    It may take a few times before you get to final upgrade to current Office version.
    It should be 14.4.8 as of current date.
    How to locate product keys
    http://support.microsoft.com/kb/2279109
    or here on locating product keys
    http://office.about.com/od/MicrosoftOfficeMac/a/Best-3-Ways-To-Find-Microsoft-Of fice-For-Mac-Key-Codes.htm
    Note is updated as of March 4, 2015

Maybe you are looking for