Should I bounce a mix, or bounce the entire project ?

Hello yet again,
I'm about to create a CD containing 12 tracks with spoken narrative + music created in Logic Studio, as a teaching aid. This will be offered for sale.
I'm not at all sure how to get these tracks from the state of being a list in WB, to the finished product ! Should I bounce a mix, or bounce the entire project, or simply click on Burn and not ask any questions ???
Thanks,
SeaDreram

Probably not, Apple controls those prices, it's a $100 difference every device you go up 4 is free, 4S $100, 5 $200. I say just go with the 5, might as well get the most up to date device.
Then of course the 5s will be announced ;D

Similar Messages

I am getting quicktime error 50 when I attempt to export a retimed project in fcpx to youtube. I mix and match retime rates. I usaully have no issues. The entire project is retimed.

I am getting quicktime error 50 message when I try to share a project to youtube. I use retime frequently, mixing and matching rates with no issues. I am having trouble with this project. The entire project is retimed ( which I have done before), it is four minutes and change in length. I used different rates, holds as well, and
secondary storylines ( retimed to match the primary clip rate ). Any suggestions would be helpfull, thank you.

I figured it out:
FCPX does not support NTFS drives, even with Paragon NTFS working perfectly for everything else on the system.
I guess Apple (just) assumes that nobody will, or should, be using any other filesystem than Mac with FCPX.
I wasted hours looking for a solution, when a better error message besides a misleading "cannot allocate memory" could have been something more useful.
Not impressed.

Just imported clips and edited as new project. closed imovie. came back later and the entire project was gone. i was not done so i did not finalize it. how do i get the program to keep my project in progress

running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
how do i get the program to save my work in progress, without finalizing it?
thanks

So, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a

How to make the entire project in the project server 2013 reschedule؟

How to make the entire project in the project server 2013 reschedule ?
Because item %compelet related to reschedule
In this photo it is known there are no items update project

Hi,
In PWA, you do not have the feature to update the project plan in one click, meaning marking as completed the work before the status date or reschedule after the status date the remaining work. Either you have to use Project Pro, or edit individually the
assignments with the actual work (if not comming from timesheets) and remaining work.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

I have a movie track and in that track I have a video loop of 10 seconds. I want that video loop to repeat (loop) throughout the entire project. How can I do this? Right now there is a fades out white space after the video clip

I am working on a Garage Band Podcast. I have a 10 second video clip in the Movie track and want to loop it for the entire project. How can I co this?

Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

I cannot Turn of Normalizing of the entire project when sharing to iTunes. . . Help

I have an amazing project, it sounds beautiful and yes, the bass is supposed to blow any speakers that are lame as ****. The song is so magic and Logic keeps cutting the volume on it when I share to iTunes and unlike garageband, I cannot seem to figure out how to stop this monstrosity. Anyone help out? Thank you in advanced.

Ahhh you opened you eyes and read the Bounce dialog?
Another thing you might want to check.
All of the Audio enhancement in iTunes shoud be Off, All of them.

Upgraded from trial to registered, now the entire project is gone

I was working on a trial version of PP and never manually saved because it asked me to save every 10 minutes or so and I clicked yes everytime. Then, about 5 hours after I've been working on it, I was importing a .mp3 when the program stopped responding. I shut the program down and reopened it and a dialog box came up saying my trial had expired. I opted to buy it, so I could finish my project. After buying and installing and updating CC, I clicked on the .prproj file that was saved to a file on my desktop and when I opened it with PP, EVERYTHING WAS GONE. I had made about an 8 minute long project, with multiple clips. When I open it in my newly bought PP, it looks like the blank workspace before I started making anything. I'm devastated. I restarted my computer, I looked under "archived files", I looked in the autosave folder on my PC, it's as if the hours of work I had just done never existed.
Please, someone help me get my project back :'(
Thank you.

So I figured it out, thanks team.
Searched .prproj in my comp and came up with a bunch of files... no idea how, why, what. It wasn't where I left off, but it definitely saved me hours of work! Thanks to my friend (:

What is best way to copy the entire LR-3 catalog from an "old" computer to a "new" computer?

I just purchased a new desktop computer and installed LR-3 ver 3.6 on it. I would now like to transfer/copy everything (including negatives) in the LR-3 catalog of my old computer to the new computer. What is the best step-by-step procedure to do so? Should I copy to an external hard drive first and then import to new computer? I have saved a copy of every photo imported to the old computer in an external hard drive but I am not sure if I should use these files or rather export the entire catalog from the old computer to an external hard drive by starting in the library, highlight "All Photographs" under catalog, and then proceed under "file tab, export as catalog". Then import the catalog to the new computer. Any advice?

Geoff the kiwi wrote:
I would recommend using the Export as Catalog including Negative files to the external and then copy those files and the catalog to the new PC. When you have the catalog and files on the external place them all in one folder to make it easier to move.
100% agree! Export as Catalog. I just did those from Mac to PC and it worked with flawlessly. The only suggestion that I would add would be to divide your catalog into smaller subsections. I had a few thousand images and at times it looked like it was hung. It was difficult to determine if LR was actually doing something. I suspect it would be easier to tell if the catalog it was importing was smaller.

Is it possible to export part of the FCPX Project from timeline

Is it possible to export a selection from the FCPX timeline or do I have to export the entire project and then edit it in another program.

andynick wrote:
Goldfish wrote:
FCP7 was much better for this:
Yes - but you don't mention the billion ways in which FCP X makes FCP 7 totally obsolete.
Andy
I didn't think it was relevant to the thread.
I'm simply encouraging the return of a few features that were left on the cutting room floor - no harm in that.
I O markers and chapter markers are a few of them and routinely a topic of discussion. It's not just me.
For the record I'm a big Fan of FCPX. It has many of the features that I said, for years, should be added to FCP7 - and I took a lot of heat over the years for pointing out the deficiencies in FCP7.
When a new editor comes to the forum and asks "why can't i do this really simple thing" , I think it's better to acknowledge his observation and encourage constructive feedback to Apple rather than implying that he was stupid for knot figuring out a convoluted work-around for something that should exist in the program.
If your post had started with "here's a work around…." rather than " takes seconds…"
and you had finished with "…hopefully we'll see I O markers in a future update…"
Rather than "…Ctrl+Zs to get back to previous state." you never would have heard a peep from me.
I just find the apologist mentality difficult to ignore. No offense intended.
best regards,
g
PS - I also think "totally obsolete" is a bit of a stretch.

When I go to a link all is fine except the link takes up the entire screen and there is no way to move out other than control alternate delete and brining up task manager to exit out of firefox, help

again, I am able to use search of firefox to get to a link but then all the tool bars from my operating system are no longer available as the link takes up the entire screen (there are no firefox toolbards either so I can't shrink the page etc).. Thus I cannot move around and am stuck with no option but control alt delete to get to task manager to close firefox.

Thank you so much...
1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

Can two users work on different files of the same project?

Sorry if this has been asked already...but can two users work
on different files of the same project? How would that work? Would
it work something like this?
1. From RoboHelp 7, user A checks out the entire project.
2. User A checks in the files they are not working with.
3. User B checks out the project but can only 'edit' the
files that have been checked in by user A.
Is this how the source control works?

That's the basic idea. User A doesn't actually have to check
out the whole project, though. RSC will selectively check out only
the files that are actually getting changed. Both writers will have
a complete copy of the project on their local machines, but the
files are read-only until they are literally checked out, which is
on an as-needed basis unless the writer explicitly checks them out.
G

How do I burn a selected few of my photos in an Aperture project? When I select a few, it burns the whole project anyway. . Grrrrr.

How do I burn a selected few of my photos in an Aperture project? When I select a few to burn, it burns the entire project... Grrrrr.......

Select the pics. Export them to a Folder on the Desktop. Burn that with the Finder.
Regards
TD

How to create RPC encoded wsdl for the bpel project created in jdeveloper?

Hi,
I have to create a bpel project in jdeveloper with the wsdl of the project in rpc encoded format. By default when we create a bpel project in jdeveloper it creates a wsdl file of document literal format, but i need the wsdl to be rpc encoded format. Please let me know how can i achieve this.
Thanks.

Hi Nico,
Thanks for your reply.
You mentioned to specify type in place of element, from where do you get this type and what more changes we need to do for the entire project to compile well with out errors.
As suggested by you, I changed the element to type and tried to compile, it is giving the below error.
Error:
[Error ORABPEL-10902]: compilation failed
[Description]: in "bpel.xml", XML parsing failed because "undefined part type.
In WSDL at "file:/D:/indu/jdevstudio10134/jdev/mywork/TimerApplication/SelectDB/bpel/SelectDB.wsdl", message part type "SelectDBProcessRequestType" is not defined in any of the schemas.
Please make sure the spelling of the type QName is correct and the WSDL import is complete.
[Potential fix]: n/a.
Please let me know what are all the changes that need to be done to complie the project successfully.
Thanks and Regards.

Why Logic isn't bouncing my mix when appears it its?

Ok this is the first time logic has done this to me, when I'm about to bounce my mix Logic will go thru the bouncing process after that this silver progress bounce bar appears and stays there for hrs without getting the mix converted to an mp3... Any help thanks

Hi,
Thanks for your reply. No, I haven't converted any color images from RGB to CYMK. The original graphic file was made as RGB. The colored box in PM7 is set to the Color Options of:
Type: Spot
Model: RGB
(R 255, G 0, B 0)
As said, in PM7 the two red objects look identical in colour tinting etc on the screen, and you can't tell the difference. But when the doc is converted to PDF the difference is obvious.
After posting to this forum last night (Australian time), I wondered if it had something to do with dot resolution. The graphic file is 300 dpi, whereas the red PM box is filled with color that may be at a much lower DPI, causing a dullness in the color. I assume the PM 7 default for this can't be altered. Maybe there is a setting in Distiller that could handle this, so that the colors are equalised.
The solution I'm currently using is to remove the box (or oblong) containing PM's RGB Red, then make another graphic file which is RGB Red (either at 300 dpi or 200 dpi, either TIFF or JPG, it doesn't matter), of the same page size as the PM doc, then place it onto the page and send it to the back so that everything else sits on top of it. When converted to PDF you now can't tell the difference between the RGB Red in both graphics.
I'm happy with the result, but it's a workaround.
Thanks,
Roger3

When i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

Hi Eriksimon,
Firstly, thanks for your message.
What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
I bounced my work to MP3 with highest BIte Rate.

Should I bounce a mix, or bounce the entire project ?

Similar Messages

Maybe you are looking for