Should I buy the Airport Express?

My Mac mini will slowly go from four bars to two bars on my families Airlink 101. Should I get a Airport Express? Or should I go for the Extreme? And with the Express could I unplug it at night and then plug it in, in the morning without difficulties?

The AX and AEBS have the same advertised range of your Airlink 101. Therefore it probably would not make a difference.
I suggest that you change the channel used by the Airlink. Hopefully you can find a channel which works better than the one that you are using.

Similar Messages

  • Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

    Hi, I'm thinking of buying the Airport Express or Extreme for my school dormitory, would i need to plug them into the already existing school internet via LAN cable or do the products just work by themselves?

    Welcome to Apple Support Communities
    AirPort stations aren't modems, so they have to be connected to the modem you are already using. The AirPort Extreme and Express have a WAN port, where you have to plug an Ethernet cable that has to be connected to the modem.
    After doing this, you can set up the AirPort station by using AirPort Utility. If you have Windows, download AirPort Utility from the Apple website > http://support.apple.com/kb/dl1547

  • Buy the airport express extension power cable separately

    Hi. I am trying to buy the airport express extension power cable separately as I do not need the other cables in the monster kit which is already very overpriced

    anyone? i think the power extension cable for the macbook chargers will work for this, can someone check it out for me?

  • Question before i buy the Airport Express

    I have a macbook.... the mircosoft laptops have something to where you can have the internet where ever and whenever well does apple have something like that and my question about the airport express... Say i go to the airport and don't want to pay 6.99 for 24 hours of internet use and i'm only there for 2 hours... So is it possible to just plug in the airport express and bam i'll have internet?

    Rabbit911 wrote:
    I have a macbook.... the mircosoft laptops have something to where you can have the internet where ever and whenever
    Yes, it's usually called a wireless network card
    well does apple have something like that
    Yes, all Apple Macs have a built-in wireless card
    and my question about the airport express... Say i go to the airport
    Um... I think you're maybe getting confused over the name "AirPort". It's just a brand name: "Air" because the data travels over the air wirelessly, and "Port" because the point on a router where you connect a computer is called a "port".
    It has nothing to do with the place you go to catch a flight on an airplane/aeroplane. Apple's Airport devices are just wireless home routers, just like similar devices from Netgear, D-Link et al.
    and don't want to pay 6.99 for 24 hours of internet use and i'm only there for 2 hours... So is it possible to just plug in the airport express and bam i'll have internet?
    Not unless you know how to hack into the existing wireless service they already provide, and that wouldn't require the wireless router, just your laptop.

  • Can I plug the airport express into 220v?

    I want to buy the airport express to use in Manila which has 220v standard. Can I plug the airport express directly or should I use a power transformer?
    Any insight would be greatly appreciated.
    Thanks,
    Toni

    It is a worldwide capable, auto-ranging 100 ~ 240v device - you just need the right cable/adapter. Apple sells a travel adapter kit if you need one.

  • What comes in the box with the Airport Express?

    I'm looking to buy and Airport Express for my husband but I really can't find a helpful sales person willing to put up with all of my questions. For starters, what comes with the Airport Express? One salesperson told be that I need to buy cables and another one never mentioned it. Does it come with cables or just the unit? I'm assuming it comes with the software? Can you help me?
    thanks

    Hi Alan
    I have an equally simple question. I have a G5 desktop and a G4 TiBook. Last week I installed an airport card in the TiBook as I use it mainly at meetings and when travelling.
    My non-wireless adsl at home runs through a router which has two ethernet ports. Do I just buy the Airport Express unit, plug it into the spare ethernet port, and my TiBook will find the broadband connection wirelessly from anywhere in the house? Is it all as simple as that? Is the single Airport Express unit all I need to create a wireless connection?
    Thanks.

  • HT3728 I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    I do not need another wireless network but want to use the airport express for printer access only.  Can this be done and how?

    You can configure the AirPort Expess to "Join a wireless network" and enable the Ethernet port so that Ethernet devices will be able to connect.
    In order to print from the iOS devices, you will need to have an application like Printopia installed on your Mac. The Mac must be active when you want to print.
    More details here: Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    There is a free trial available for Printopia, so make sure that it will work before you buy the AirPort Express.

  • I have a Cisco wireless router.  Can I buy an Airport Express plug in booster for a distant part of my house or do I need an Airport Extreme base station instead to make the Airport Express plug in booster work?

    Can I buy an Airport Express plug-in wifi signal booster to connect to a Cisco wireless router, or do I have to buy an Airport Extreme base station to make the Airport Express plug-in work?

    You would need either an AirPort Extreme or an AirPort Express connected to the Cisco router, with a permanent Ethernet cable connection.
    Configure the Extreme or Express that is connected to the Cisco router to "create a wireless network".
    Then, you could add an AirPort Express to "extend a wireless network" to provide more wireless coverage for the network that the Extreme or Express would be creating.
    Remember that the Express can only "extend" the quality of signal that it receives, so it must be located where it can receive a strong signal from the "main" AirPort.
    If you don't need the Cisco wireless signal, you could turn it off.....or use that network for guests or something similar.
    The bottom line here......you always need two Apple routers if you want to extend the network wirelessly.

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • Do I need to buy any extra cables for the airport express??

    I was wondering if i need to buy any extra cables for the airport exprees.what kind of cables do i have to get to connect the airport express to my DSL modem?

    Typically all you would need is an Ethernet cable (cat5, rj45 end), and it would be connected to the LAN port on the DSL modem, and the Ethernet jack on the AP Express.

  • Hi I just bought the airport express, plugged it in and opened my airport utilities on my macbook and it doesn't seem to recognise  it anyone have an idea what I should do?

    hi I just bought the airport express, plugged it in and opened my airport utilities on my macbook and it doesn't seem to recognise  it anyone have an idea what I should do?

    If you are trying to configure the AirPort Express using wireless, you must first log on to the wireless signal that the Express is broadcasting to establish a connection.
    Look for a wireless network with a name like Apple Network xxxxxx where the "x" could be a number or letter. No password is required to log on.
    Most folks find it easier to temporarily connect using an Ethernet able as stic suggests in his post....if you have one handy. Once the device is configured, you can disconnect the Ethernet cable.

  • How can i print my files from mi iphone 5 throught the airport express?

    How can i print my files from mi iphone 5 throught the airport express?? i have the last iOS version installed and also the last firmware version of the printer. the printer is already connected to the USB airport express and when i look for printers in airprinter there is no printer found. i have an HP LASERJET P1606dn(i think that is supported by the airprinter).

    In order to function with AirPrint, a printer must connect to the network wirelessly.
    Even if you have an AirPrint compatible printer, iOS devices will not be able to print to the printer when it is connected via USB.
    So, you have two options:
    1) Reconfigure the printer to connect to the network using wireless only and the iOS devices should be able to print that way....assuming that you have up to date drivers for the printer installed.
    2) Leave the printer connected via USB and then use a third party App like Printopia installed on your Mac as a "workaround" to (hopefully) allow the iOS to device to be able to print.  If you want to give this a try, there is a free trial for Printopia, so you will know if it will work before you buy. You must have a Mac running on the network in order for Printopia to function correctly.
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

  • Murder on the Airport Express (AE 1st Gen cannot find Wireless while plugged in in the same room as the modem, router and Time Capsule

    First, the reason for my compounded frustration:
    I wrote a lengthy, comprehensive post on this late last night.  I submitted it and received a notice at this URL:
    https://discussions.apple.com/___sbsstatic___/maintenance.html?start=0&tstart=0
    It gave a message:  "A yellow sticky bearaing the words, "We'll be back soon."  and a typed message reading, "We are busy updating Apple Support Communities for you and will be back shortly."  Needless to say, it never came back.  This morning as I began trying to reconstruct the very detailed post I wrote last night, the Communities system offered me an opportunity to restore the post from last night.  Sadly, it contained only a portion of the first line.
    I'm going to try it again.  The problem inherent in putting it all in words last night, is that I no longer remember the exact wording of the error messages.
    I've never gotten this Airport Express (1st gen, purchased mid 2010) to work.  I thought it was working, but working poorly.  A green light on the device is, apparently, NOT an indication of connection to the wireless.  It wasn't workingl.
    Description of devices which use the network:
    I have a Broadband network with a modem. 
    It is connecteed to my 2T Timecapsule (purchased mid 2010). 
    Connected to that is a 24 port Cisco Router. 
    Not connecting to that, though showing a solid green light, is my Airport Express (1st Generation, purchased mid 2010)
    Connected to the router are many ethernet cables giving hard-wired access to:
    Printers (HP 8600 Pro purchased 2012))
    MacBook Pro (purchased mid 2010) and
    IMAC (purchased mid 2010).
    3 Apple TV devices (1st generation purchased early 2011)
    1 Apple TV device (2nd generataion purchased August 2012)
    Connecting to the Wireless Network are IOS devices (current IOS versions on all)
    iPad 2nd generation (purchased the day it was available) 
    iPad 3rd generation (purchased the day it was available)
    iPod (mid 2010)
    iPhones (4S)
    Description of Layout of Network/House
    My home is approximately 70 feet by 25 feet. 
    All Networking hardware is at one end of the house, the south side.
    Airport Express (1st Gen, 2010) has been placed in the middle of the house to boost the wireless access at the north end of the house.
    Ethernet cables are installed under flooring with cable ends extending up through flooring, and are availble to all devices with Ethernet ports..
    Description of Problem
    Investigation of the wireless access dysfunction with the iPad (2nd generation, mid 2010)  revealed no connection to the Wireless Network, in spite of glowing green light on Airport Express and Airport Utility screen.
    Description of actions taken to correct the problem
    Loaded Airport Utility on MacBook Pro.
    Airport Express shows green light on screen.
    Double clicked on Airport Express Icon
    Message that Airport Express was unable to extend the network
    Message changes suddenly to something about not finding the Airport Express
    Airport Utility searches Airport Express, attempting to read its settings
    Message appears:  Device not found.  Airiport Express was previously part of the network, and offers to let me "forget" the base station.
    I exit the error message.
    A yellow triangle bearing an exclamation point sits to the left of the Airport Express' Description
    Airport Express shows green light (as always)
    Clicking the link, "Other AirPort Base Stations" indicates no base stations can be found.
    Moved Airport Express to the room at the south end of the house containing all network devices
    Plugged it in with clear, completely unobstructed view of Time Capsule.
    Light on Airport Express flashes yellow and then turns solid green (like always)
    Bring Mac into the room at the south end of the house containing all network devices and the Airport Express with the green light
    Close Airport Utility on Mac
    Reboot Mac
    Open Airport Utility on Mac
    Airport Express still shows as it did in 1.1.7. above.
    Attempts to check Airport Express' access to Wireless network:
    Unplugged Airport Express HEY!  THE GREEN LIGHT WENT OUT!!!  ;0)
    Disconnected all Ethernet cables.
    Tested ALL devices for Wireless access.
    All devices access the Wireless network extremely well (dot and three curved bars) EXCEPT
    IOS Devices tested at the north end of the house. These devices show a blank where the wireless bars should be, and intermittently show a dot.
    Followed instructions contained in a similar discussion about Airport Express not functioning:
    Unplugged all Networking Hardware
    Powered off all Equipment which access the Internet in any possible way.
    Powered up all Networking Hardware, one at a time, in the order described in that discussion.
    Powered up all Equipment which access the internet, one at a time.
    Tested ethernet cablingAll equipment functioning.
    Tested Wireless access:
    Removed all ethernet cabling
    All devices, including IOS devices, access the Wireless Network perfectly EXCEPT any placed in the north end of the house.  Those perform exactly as they did in step 3.3.2.
    Connected all ethernet cabling.
    Plugged Airport Express into socket in the Network Hardware room at the south end of the house.  I get exactlyt the same results as before.  The lovely green light glows on the Airport Express.  Airport Utility reports Airport Express cannot find the Wireless network and also says there are no base stations connected to the internet.
    Still in Network Hardware room, I attempt to find other base stations by cabling the Airport Express to the MacBook Pro
    Airport Utility shows Airport Express with a green light
    I double click the Airport Express Icon
    Box says connection is average and status is (green light) Extended Network.
    I click Edit
    I go through each tab.  I note that in the Wireless tab, the Network Mode is as I had set it, "Extend a wireless network".
    Under the Network tab I note that "Enable Access Control" is as it should be, NOT selected. 
    Under the AirPlay tab, I note that "Enable airPlay" is selected.
    I click cancel and leave the Edit screens.
    Curious to know if Airport Express can find the Wireless network now that the device claims to be functioning as an extended wireless network, I disconnect the ethernet cable from the Airport Express.
    I watch the Airport Utility screen closely.  Nothing is happening.
    With bated breath, I double click on the Airport Express icon.
    The popup box shows "extended wireless network"
    I click on edit and we start the whole mess over again.  (See 1.1-9. above)
    Curious to know if cabling the Airport Express to the iMac (almost to middle of house) will offer hope and prosperity to IOS devices at north end, I unplug the Airport Express and carry its now-exhausted little body to the iMac, ethernet cable in hand.
    As I unplug the iMac from its ethernet access, I'm informed by Cranky Boy that no way is he going to accept that as a reasonable solution to his problem.  He will not live wireless while even one ethernet cable is poking up through a floorboard.
    Cranky Boy is reassured when informed that, though the Airport Utility shows the Airport Express connected, merely double clicking on the icon produces the same result as laboriously described in 1.1-9. above.
    After quieting Cranky Boy by reconnecting the iMac to the Ethernet, I return the Airport Express to the Network Hardware room.
    Again, curious to know ...  I reconnect the Airport Express to the MacBook Pro. I want to know if it will exrtend the Wireless network from its position one foot from the Wireless Network.
    I close and reopen Airport Utility (as I always do, but forgot to write)
    I click on the Airport Express icon (which bears a little green light like the other big boys).
    BUT THIS TIME, when I click on the Airport Express icon, the pop-up box says my connection is Excellent, the green light status shows, "Extended Network" and clicking on "Extended Network" produces the same old `Airport Express was unable to extend the Wireless Connection. 
    I click on the Edit option. 
    I buzz through all the tabs.  I cancel instead of update, leaving everything as it was (as I did the first time)
    I decide to go back into edit and select "Internet Options" under the "Internet" tab.
    Since I have no idea whatsoever as to what IPV6 is and what it governs, I decide to configure IPV6 to Automatically Connect and then, with a whole new set of opportunities, I leave IPV6 Mode set to "Tunnel" and then I learn that I will get to see what happens when  "Enable IPV6 Connection Sharing" is enabled.
    I check the other tabs to see if anything has changed in their menus
    Jesus Saves and so did I. 
    Apple updates and so did I.
    I am warned that my device and its network services will be temporarily unavailable if I continue. 
    It seems unaware that I am laughing uncontrollably at the suggestion that my device and its services will be TEMPORARILY AVAILABLE.  What?  An improvement in performance is warned?
    Life continues and so do I.
    I breathe deeply to decrease my adrenaline.
    Airport Utility flashes a red warning next to the Airport Express Icon and then quickly rethinks the matter and decides to show it as connected.
    I click on the Airport Express Icon.  This time my connection is only "good".
    I click on Extended Network. With a new-found consistency it informs me that my device is unable to extend the Wireless network and it chats with me about using the same Wireless password for my device that is used for the Wireless network access.  I did.  It is.
    I change my settings back to the way they once were, I save like Jesus and Update like Apple
    I decide to go back into Edit and modify the settings under the Wireless tab, changing from "Extend Wireless Network" to "Join Wireless Network".
    I save.
    I click on the Airport Express Icon.  My connection has degraded further to "Average"
    I click on edit just to see what will happen, but no further information is forthcoming.  Settings are as I left them.
    I wonder if the Airport Express would extend itself now that it has joined the Wireless Network.
    I click the Airport Express Icon.
    I click Edit
    I change the Network Mode from "Join a Wireless Network" to Extend a Wireless Network. Unfortunately, there was no option for "don't forget where the Wireless Network is!"
    I am still "unable to extend the Wireless network"
    I disconnect the Airport Express from my MacBook Pro.
    After closing and opening Airport Utility, I sit and stare at the Airport Express Icon.
    It has no light or error messages
    It has a yellow triangle with exclamation point
    It has no light or error message
    It has a yellow triangle with exclamation point
    I finally decide to see what THIS error messages says.  It says Device Not Found.  Patti Harada's AirPort Express was previously part of your network.  Check that it is still in range of your network and is plugged into a power outlet.  Click Forget to remove this base station from this network."
    I click "Forget".  Airport Utility has forgotten the Airport Express ever existed.  It has also forgotten how to find it again.
    I, however, am unable to forget how much I shelled out for this POS and fear I will never recover from working this intensely and tediously on documenting something so hideously inconsistent in its test results.
    I wonder if I should recable the Airport Express to my MacBook Pro
    I decide I've had about enough.
    I document this ad nauseum in the hopes that someone can read it THOROUGHLY and offer me a solution to my problem.  What is my problem?  I am so busy fighting off Alligators that I forgot I only came in to drain the swamp!  Ah, but I remember now:  Cranky Boy can't watch Netflix on his iPad (2nd generation) in the north end of the house.
    Any solution that works will do.  I'll buy another piece of whatever kind of equipment you think best.

    Well, aren't you all that and a bag of chips!!!!
    Oh what a relief!  What a RELIEF!  
    That just cleaned up my life.  And Cranky Boy is actually smiling!!!
    Houston, we've got dots AND BARS!!!
    P.S.  All my firware and software are always current.  If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
    P.P.S.  Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!!   Who knew?
    Thank you so much, m'Lord.  I am in your debt.  What would you have me do?
    Patti in Tucson AZ

  • I use my ps3 online gaming, is the airport extreme or the airport express be compatible with ps3? Is it going to be a better connection compair to other router? Which one is a better choice for me, airport express or airport extreme??

    I bought linksys EA3500 router. Its still in the box and before I open it I want to learn more about the apple airport router, is the apple going to work with my online games with ps3? I have iPad, 2 iPhones, apple tv and Mac mini.  If the airport express or airport extreme is a lot better and will work for ps3 which one should I get?

    Airport will work with PS3.  From what you've stated, the Extreme is more than you need.  Buy the Express.

  • Is it worthwhile to buy the airport extreme for non intel

    I currently am using an airport express for my home network and want to use it on my home stereo(upstairs) so we can play music from itunes. So I need to buy another airport for downstairs. Will I get any benefit from the extreme or should I just get another express?

    idadof3, Welcome to the discussion area!
    I think iFelix provided a very good answer in your other thread "Is it worthwhile to buy the airport extreme for non intel".

Maybe you are looking for

  • Change detail frame size from page 1 to page 2?

    Hello, I wish to build a report for invoice printing, where the first page on each invoice has one layout but the following pages have another. Is this possible? Page one has three sections: 1) Invoice info 2) As many invoice lines as can fit between

  • Error connecting to the Exchange Management Shell - and no one can connect w/ Outlook or OWA

    Whew - I'm not sure what's happening but everything blew up this morning when another admin rebooted the server... I can't connect to the Exchange Management shell - I get this: [<servername>.<domainname>.local] Connecting to remote server failed wit

  • Adobe Acrobat Pro X Crashes when Trying to Scan to PDF - Epson Perfection v30 on Windows 7

    I am running Windows 7 with Acrobat Pro 10.0.0 I have a Epson Perfection v30 Scanner installed. I open Acrobat, and when I select Scan to PDF, pick the v30 Scanner, and start the scan, it does actually start and complete the scanning process. However

  • Java.security.AccessControlException

    java.security.AccessControlException: access denied (java.io.FilePermission C:\Sun\AppServer\domains\domain1\applications\j2ee-modules\fileserver2\ind\_1.fnm delete)      java.security.AccessControlContext.checkPermission(AccessControlContext.java:26

  • Environment JNDI on JWS

    We are migrating from Tomcat to JWS but unable to get Environment variables to work. In tomcat, we have something in web.xml like:      <resource-env-ref>           <description>Property file for the server</description>           <resource-env-ref-n