Should I connect to the internet for a first time-machine back-up?

I'm doing a first back-up on my iMac using Time Machine and and external HDD. Does it need to be connected to the internet? Are there pros/cons to either way?
Thanks

What is that Time Capsule connected to?  If you're trying to connect it to a broadband modem, you may need to reset the modem to convince it to connect to a "new" device.  Depending on the model of modem, that can be as easy as removing power for a few moments.  If that doesn't work, remove power and wait 15 minutes.  Further reset steps can involve pressing a "reset" button or removing a battery if the modem has one.  In the worst case, your ISP may need to edit its settings to update to the MAC address of the new router.  If they won't or can't do that, powering down the modem for 16 to 36 hours can reset the connection.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

Similar Messages

  • I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

    I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

    Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

    I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?  No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

    1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
    2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
    (110331)

  • Macbook Air only connects to the internet for a few seconds at a time.

    My 2013 Macbook Air (10.8.5) will only connect to the internet for a few seconds. It recognizes the wifi, but will just timeout when trying to access a website. If I turn Wifi off and then back on, it will work for another few seconds, only for the same issue to come up. I've tried EVERY SINGLE troubleshooting tip I could find and nothing works. I've renewed DCHP, rebooted my Mac, rebooted the router, network diagnostics, everything. I've scanned with Sophos multiple times and nothing has been detected. My 2007 MacBook Pro works just fine on the network as well as my roommates Macbook and my Apple TV. I have no clue how to fix it and am praying someone knows what to do. Please help!

    Start by getting rid of "Sophos," which is worse than useless.
    Remove the Sophos product by following the instructions on this page, and also this one, if applicable. If you have a different version, the procedure may be different.
    Back up all data before making any changes.

  • Do you have to be connected to the internet for the download to complete?

    do you have to be connected to the internet for the download to complete?

    Sure. Or where else do you think those files would be coming from?
    Mylenium

  • Does my computer need to be connected to the internet for tune-up to work?

    does my computer need to be connected to the internet for tune-up to work?
    This question was solved.
    View Solution.

    Hi,
    Yes because it updates your machine:
      Updates, which help to protect against future system performance issues by updating the PC with the then-current Windows, firmware BIOS, and security software updates
    Source: http://www.hp.com/sbso/services/pc-tune-up-pro-datasheet.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT3805 I selected 179 photos to be have printed 4 x 6.  The program indicated that they were being processed.  After the completion of that process I get the message that I cannot get a connection.  What gives?  I can connect to the internet for other pro

    I selected 179 photos to be printed 4 x 6.  The program indicated that they were being processed.  At the completion of the processing, I get the message "I can not get a connection".  I am able to connect to the internet for other programs, but not aperture.  What gives???

    Hello thexchicop,
    Thanks for using Apple Support Communities.
    I'm sorry to hear about the difficulties you're experiencing when trying to place your prints in Aperture.  I'd like you to do the steps in this article to help resolve the issue:
    Aperture 3: Book ordering panel turns white when submitting an order
    http://support.apple.com/kb/TS3464
    Take care,
    Alex H.

  • HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Read through this for information about Airprint printers and how to use them:
    http://support.apple.com/kb/ht4356

  • WICH ONE SHOULD I CONNECT  TO THE INTERNET (DSL) FIRST?

    I have a Emachine Desktop and I just purshased a ibook G4. Very soon I will connect to the internet. I will call Cox High Speed Internet Service. Wich of the two should i connect to the DSL? The ibook G4 or the Emachine desktop? I am taking in consideration the wireless Home Network also. This is the reason why I will like to get advise from some one experience on this.
    LightBearer.

    Lightbearer,
    The other poster has a DSL modem/router. You may not. Check the back of your modem to be sure.
    If your modem only has a single ethernet port, you will need to get a router. The router will have a "WAN" port which must be connected to the modem, and the other "LAN" ports for connecting computers in your network to the router. The router has a DHCP server that will distribute internal IP addresses to each connected computer.
    Also, if you are calling Cox cable, you will be getting a cable modem, not a DSL modem. DSL service is provided over your phone line, usually by your phone company
    Scott

  • TC Looses connection to the Internet for wireless device & new Apple TV

    I have a new TC (1 TB) that I got within the last month or two, I use it as my Internet router behind my DSL modem. TC gets a DHCP address from my DSL modem then does NAT to both Ethernet and Wifi devices behind it. After a short period of time I have noticed that my Wifi devices (New Apple TV, Macbook Pro, & 2 Iphones) will loose connectivity to the Internet, although they never loose their Wifi connection. What is strange is that I have several hard wired Ethernet devices that can still access the Internet going through the TC at the same time the wireless devices can not.
    In order to get the wifi devices back working I have done a few things, disconnected and reconnected the Ethernet cable between the TC and my DSL modem, power cycled the TC, power cycled my DSL modem. It seems like the most reliable method is power cycling the TC.
    This seems to happen pretty frequently however with no pattern or cause I can detect. The only interesting thing is that I just installed my New Apple TV and prior to that I do not recall having to recycle the TC. I am inclined to think the TCP video streaming might be overloading the TC and causing the wireless process to crap out while the ethernet ports are fine.
    Any thoughts or comments would be appreciated. Will do some more troubleshooting and will contact Apple support at some point. I will also update this thread when I find out more.

    I have a similiar problem - but I don't have Apple TV - and when the TC looses internet connection it is for wired and wireless devices. WLAN and LAN still working.
    At the same time i cannot access the configuration of the TC thru Airport - are you able to do this?
    I also have the feeling that high data loads provokes the error more often.

  • My itunes will not connect to the internet for some reason,

    i can go to the itunes store but when i try to update my iphone it tells me i am not connected to the internet whats going on? anyone have any idea?

    I am experiencing this problem as well.
    I have access to the internet and can download songs from the music store but iTunes is being its usual pain in the rear and says I do not have an internet connection when I try to download any updates.
    This does not seem to be a firewall issue, at least as far as I can tell, as I have McAfee and both iTunes and iTunes Helper have Full Access in my firewall settings.
    Any help would be greatly appreciated.

  • I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

    Time capsule has been working perfectly for months.
    Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
    Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
    I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

    What OS are you running??
    It is very typical Yosemite issue.
    1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
    From my screenshot you can see the TC address is 192.168.2.57
    It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
    2. In Finder use Go, Connect to server.
    Type in SMB://192.168.2.57 (replace with IP you discover).
    If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
    This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
    Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

  • I have no folder for firefox in application support... where can I find the stored passwords from my time machine back up!!?

    Everywhere I look it says I should have a folder for Firefox in library/applicationsupport/ BUT I don't have one! I'm looking to restore passwords from a time machine back up but there's no Firefox folder so I don't where to look. I even did a fresh install of Firefox on my mac and even then it never created a Firefox folder in library/applicationsupport/... they must be store somewhere in my back up...!?

    Hello kamilr, check also in :
    ~/Library/Mozilla/Firefox/Profiles/<profile folder>
    The tilde character (~) refers to the current user's Home folder, so ~/Library is the /Macintosh HD/Users/<username>/Library folder.
    note that in mac 10.7 and above, the ~/Library folder is hidden by default, see : http://kb.mozillazine.org/Show_hidden_files_and_folders#Mac_OS_X
    when you find the file seek for '''key3.db''' and '''signons.sqlite''' files.
    Your passwords are stored in two different files, both of which are required:
    '''key3.db''' - This file stores your key database for your passwords. To transfer your saved passwords, you must copy this file along with the following file.
    '''signons.sqlite''' - Saved passwords
    thank you

  • My OSX10.6.8 only connects to the internet for 5 second intervals??  Modem works fine (husband is not having problem on other computer), restarting doesn't work.  Can browse web just fine for 5 seconds until it disconnects.  Help??

    I am running Mac OSX 10.6.8, but this problem has occurred also while I was running OSX 10.5.  This problem happens about once every two or three months, but seems to occur randomly.  When I try to connect to a wifi network on this computer, it will only connect for approx. 5 seconds before disconnecting, either telling me the password is wrong (which it is not) or a "connection timeout" message.  During this 5 second window, I can access the internet just fine until it disconnects me.  I don't understand why it is doing this.  My router/modem is working fine, my husband is using our other computer without problem.  In the past, restarting my computer a few times seems to do the trick.  But at the time of my typing this, it has not made any difference.  I am currently connected via an ethernet cable, but I would like to go back to being wireless.  Any advice for me?

    Welcome to Apple Discussions!
    I probably can't help much, but I have occasionally had the same problem. You might try going to System Preferences>Network and look at your Airport connection. See if the diagnostics can help.
    Good luck!

  • Connecting to the internet for the first time

    i have a new macbook, and i dont have a clue how to connect it to wireless networks. I dont even know what equipment you need. I have attempted to connect it to the house wireless network, and while it connects, the internet does not work on it. I need basic instructions on what i need- do i need a wireless card or base station?? help would be very much appreciated.

    If the macbook "sees" the network, but doesn't connect it's probably a security related issue.
    Click on the blue apple in the upper left hand corner of your screen, then select "System Preferences", then select "Network".
    In the list you should see "Built-in Ethernet", "Airport", and "Built-in Firewire". Select "Airport" and click on the Configure button.
    You should see your network name (called an SSID) listed in your Preferred Networks. Click the name, the click the Edit button. This is where you would setup your security to match what your wireless router is using.
    You may also need to include the MAC address in the router to allow the computer to speak to it - in Apple speak this is listed as the Airport ID which is above the list of networks.
    HTH!
    Brian

Maybe you are looking for

  • Trouble connecting to server

    We have an Xserve running 10.6.5, and clients running a mix of 10.5.8, 10.6.4 and 10.6.5. Up until today, all clients were able to connect to the server using the Connect To Server option in the Finder's go menu by typing in afp://server.domain.com.

  • Org model for sales and service

    Hi, I have an issue while creating org model, I want to maintain  organization for sales and service differently under a org unit, but in service org element when I have selected service radio button and type also as service in Function tab, it is ef

  • I keep getting a "missing plugin" for midi and mp3 files.

    I keep getting a "missing plugin" for midi and mp3 files I want to listen to online.  These are Hymn files.  And I get a message telling me I have a missing plugin. Any ideas?

  • Deleting Duplicate Contact Group

    So... I sync'd my contacts "from my mac" while I was already syncing with MobileMe, and now I have duplicates of all my contacts, and as such I would like to delete the "All from My Mac" group. In searching for a solution, I found various older posts

  • CATW integration with portal (IAC session)

    I'm trying to integrate the catw application in the portal with a IAC iview. The application itself work's fine.  But when I close the application (closing the window without pressing the ext button)  the user is locked out for a while. We don't want