Should I contact Bt as my Speed never went near my...
Hi there... In my previous post I did mention my average speed is around 25- 30mb . Its now 14 days since my installation and the average speed is around 26mb ! My ip profile is set to 38mb , where is my 12 mb gone ? Should you lots think I should contact Bt that my speed is not upto the profile speed ? Will they ignore me coz I am getting 25mb ? Need advise ! Thanks
Yes they probably will.
How are you connecting, wired or wireless
toekneem
http://www.no2nuisancecalls.net
(EASBF)
Similar Messages
-
I would like to get my iphone 4 unlocked. Whom should i contact in India?
i would like to get my iphone 4 unlocked. Whom should i contact in India? I have already updated the software to ios 6.0 through itunes but need to get unlocked.
Also i would like to reactivate my old iphone 3gs, but unable to operate it. I am getting a message on screen saying that the server is temporarily unavailable. whom should i contact to get it back into normal working condition, i have already unlocked it in my country as it was brought from UK."Whom should i contact in India? I have already "
ONLY the carrier to which it is locked can unlock it. Contact that carrier and ask if they offer this service and if you qualify. -
I just updated my 3GS to 5.0 and most of my apps and contacts disappeared. THis has never happened before through many updates. How can I get it back to where it was?
I did a restore from backup but that did not change anything.
I can see my apps in iTunes - it is like the update got some apps but not all, no contacts.
Total waste of my Friday.
What steps can I take to bring the phone back.
I know Steve is not smilingI got my contacts back by doing another restore! Relief..
But only a very few odd apps are showing up on the 3GS
Any suggestions? -
I've erased and formatted the hard drive accordingly in order to reinstall OS X. everything went fine until about half way through the install. it just seems to stop. how long should this take? should i do something else to speed it up?
About all you can do is wait until it finishes or you get an error message.
-
I am trying to understand the licensing procedures for using tabKiller for 3.5.7 firefox. Who should I contact for this? I do not have the customer service phone number for Firefox
Tab Killer is not created by Mozilla, it is created by a private individual who has made it available at no cost for other people to use.
-
I downloaded several tv shows on my computer and attempted to drag and drop to my iPod touch. I received an error message indicating that there was a problem syncing to my iPod. What steps should I take next? This has never happened before.
Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select the Safari if not already.
Press Force Quit button at the bottom of the window. Wait.
Safari will quit.
Relaunch Safari holding the shift key down.
http://www.thesafemac.com/fbi-ransomware-virus-rampant/ -
I lost my iphone 4 tonight, when I pull up Find My Iphone it shows a location of about 38 miles from me. Should I contact police to possibly retrieve it or should I try retrieval myself.
Hi ..
What to do if your iOS device is lost or stolen -
Should connecting to a router affect speed of Internet connection?
I have a Netgear router and I have connected it to two MacBook Airs that I have.
I have cable internet, a line that comes out from the wall, and which I stick into the computer using the USB ethernet dongle.
But now that I am using a router, I connect the cable line into the router and use the ports to connect to the computers.
My question is:
What is the correct IP address that should be showing?
Network System Preferences show:
Status: Connected
USB ethernet is currently active and has the IP address 192:168.x.xx
The usual IP address (when I am not using a router) is usually 185.xxx.x.xx.
Is this OK, that it's showing the routher IP address?
The reason why I am asking is that the internet speeds seem to be slower when I am on the router.
It might just be my imagination and also because I am checking the speed a lot more than usual.
Should connecting a router affect the speed of the internet?
The router's maximum speed is 300 mbps and the cable internet's speed is 100 mbps.
I have noticed that the speed of the internet with the router is very variable: about 12 - 80 mbps.
Should I not worry?
I know that the internet speed with cable internet can fluctuate a lot more than with DSL.
Thanks for any replies.I am connected to the router by LAN cables. I am not using wireless. I am using cable modem.
The cable from the wall goes to the router into the WAN port. Ethernet cables go from the router's LAN ports and to the two computers.
When I wasn't using the router, the speed of the cable internet could go as high as 100, occasionally as high as 200 (100 was the advertised speed of the cable internet).
Now, with the router, it's around 30. But I have gone as high as 80 while I have been testing with the router connected.
I think I am worrying for nothing, but I just want to know generally --- does a router affect the speed (assuming it's a router that can handle maximum speeds of the cable modem and that it's connected correctly, etc)?
I read that cable speed can depend on how many people are using it at the same time in that area and that sort of thing. I know the cable speed does vary a lot. But usually it's good during the daytime, about 90 mbps. -
hi, my mac book pro, spotlight indexing process not compleate last 1 week. what should i do.. my machine speed are very poor. pls help
System Preference/Spotlight/Privacy
drag your disk into the list, excluding it temproraily from the indexing procedure.
Restart your mac, and open the Privacy page again, click the disk and the minus button to re-incorporate it into the procedure and restart the indexing.
Or just try your luck in Disk Utility/First Aid/Repair Disk Permission first.
See if these help -
My IPOD shuffle 3rd gen was gifted by my sister in early 2010, the earphones needs to be replaced...whom should i contact?
i have seen online that it would be replaced by the Apple team. Can I still avail this opportunity. Earphones has similar problems listed online.
http://www.apple.com/support/headphones/replacementprogram/
Please suggest.I'm not aware of any Apple program that "replaces" iPod shuffle earphones (beyond the warranty period).
However, you can buy a replacement
http://store.apple.com/us/product/MB770G/B
This one has a built-in microphone, which will not be needed for a shuffle, but the control buttons will work with the 3G iPod shuffle, as indicated by the "This accessory is compatible with the following" listing. -
I use an iphone 5 ..my problem is whenevr i set a picture of my contacts in their contacts info..the picture never shows up when they call me..i even added my country code to their no. but it still didnt solve the problem..so wat shud i do now?
Do you see your contact's number?
What carrier are you using? -
I purchased the sticker from the application LINE and they already deducted the money from my appstore account but I didn't get anything. Who should I contact?
All you can do is contact ...
Apple - Support - iTunes Store - Contact Us -
Yesterday, I recieved an e-mail, which informed me I had bought a game or an aplication (I don´t even know what it is) that I DIDN´T bye. Right now I have no idea what to do or who should I contact to ask for help, so I can have my money (20 dolars) back. Can someone tell me what canI do plaese?
http://www.apple.com/support/itunes/contact/
-
Qosmio F50-126 - Fan Speed never htting maximum
Hey
This issue been bothering me for a long time but was too lazy to post on it. When I boot up my notebook, you can hear the fan speed hitting its maximum RPM. But during gaming when the laptop is about to reach its maximum temperature to restart, the fan speed never hits its maxium RPM. It always seems to be about 50 percent when it about to hit the overheat threshold.
Can you tell me how to fix this issue so the notebook does us its fan maximum RPM during gaming or some other cpu/gpu intensive process?
I have all the lastest BIOS and drivers installed to date.Hi
The fan speed is controlled by fan table which is stored in the BIOS.
Usually the fan speed would be set to a higher level only if an certain temperature level has been reached.
Furthermore the notebook would shut down automatically if the temperature level would be too high
If the unit runs stable, I would not be worried about the fan performance. -
Hi! I want to design drawings for covering Apple products. Whom should I contact?
Hi! I want to design drawings for covering Apple products.
Whom should I contact?
Help me please =)It is not clear what you want. We are just users, so we have no inside Apple information.
Is this a copyright thing? You need permission for something?
Is this an employment thing? You want to create drawings for Apple?
Maybe you are looking for
-
32-bit ODAC 11.2.0.2.1 Installed on Win7 X64 with Oracle 11gR2 x64
I have Visual Studio 2010 x64 installed on a Win7 x64 Enterprise system, along with Oracle Express Edition 11gR2 x64. I downloaded and installed 32-bit ODAC 11.2.0.2.1 so I could use Oracle databases with Visual Studio, along with SQL Server. When I
-
Hi, On T-code FB03 there is a option to attach any document on System, but anybody knows the drawback of uploading any document. I guess if we upload any document through FB03 it will be stored into Database directly becuase there is no Content Serve
-
Hi, I have some problems to link up 3750 with the following configuration. In fact, i have 2 products generating Multicast flows (1 Main & 1 standby). 1 is connecting to 1 C3750 Main 1 is connecting to 1 C3750 Standby Port 7 of the C3750 Main is conn
-
Continued trouble making button hot spot invisible after click
I posted this question a few days ago and wasnt able to come up with a solution so I'm hoping to post again and see if anyone can steer me in the right direction. I have a few buttons that use loadmovienum to load a few clips into levels. The code on
-
Dear SAP Guru, I want to know the calculation procedure of "Total Target Cost" for Labor in KKS2. In the KKS2 "Total Target Cost" of Labor is showing 72.91/=. But I cannot understand how it is come from. Please advice me. Best Regards, Shoyeb