Should I do a fresh install?
Hey guys, I purchased my unibody macbook (Intel core 2 duo 2.4 GHz, 4GB ram, 256 SSD, NVIDIA GeForce 9400M 256MB, running 10.7.2) in April of 2009 and have been using it exclusively ever since.
Recently, my computer has begun to slow down quite a bit. Safari hangs on websites, I receive the spinning rainbow more often, the computer shuts down randomly and won't turn back on for hours, etc. I brought the computer into the apple store (it's still covered by applecare until April of 2012), but all of the diagnostics tests came clean. Over the past few weeks, the computer has continued to slow down quite a bit, and I have noticed that my CPU is reaching levels that I haven't seen before. Currently I only have safari open with one tab, but my fans are running at 6000+ RPM and my CPU is peaking a bit over 90 degrees. I looked at my activity monitor and it seems as though the flash plug-in for safari was hogging my CPU usage. I uninstalled that, reinstalled, repaired disk permissions, and restarted my computer, but that hasn't seemed to help since I did it a few days ago.
I know that while my computer isn't exactly new, the processor in particular, I can't seem to feel as though it should be running more efficiently. I've used 159GB of space on my SSD, with around 60GB of that being music and photos.
My question is whether or not doing a fresh install of lion would possibly alleviate this issue. It might not be bad to do spring cleaning, but only if it will possibly help. If I do proceed with a fresh install, is there a way that I can back up just my documents (all on pages), music (all on itunes), and photos (all on iCloud)? I have plenty of time machine backups ranging from when I got the computer to now since I do it every week, but that would restore the computer entirely to those settings.
Suggestions?
ipodperson1 wrote:
I live in canada and dont want to start downloading it and have it go for 4 hours
Then wait a week or 2 before buying and downloading. Even then the servers may be overloaded. No one knows as it isn't tomorrow yet.
No matter where you are or when you download it, it is going to take some time. If it is the same size as the lion download that could be 40 minutes to several hours depending on your internet speed and the download server internet speed and how busy they are.
Similar Messages
-
Should I upgrade my iphoto panther to Leopard or export and fresh install?
My Panther iphoto library got corrupted some how and I had to create a new library. I did not like this because it changed all the order of my photos and I could not organize them the way they were. I still have the corrupted library on my hard drive. I never deleted it for fear that I did not get all of my photos onto the new library. I think I pretty much did but not for sure. The dates that I imported the original library pics were all correct. Now that I had to redo the library half the dates are wrong because it's going by the created dates on the photos instead of the day they were imported. It's all very confusing to me.
Anyway.....now, I just purchased a copy of Leopard. I was thinking of doing a fresh install instead of upgrading my g4 in hopes that I would start with a clean slate. Only problem is trying to back up all those photos and then reimporting them. Do you guys think I should not mess with it or buy a firewire external hard drive, export or back up my files, do a fresh install and then re-import? One of the reasons I also want to start fresh is because my daughter went in and started deleting a bunch of folders she did not think she needed and I had to get thousands of files out of the trash. I don't know if I put everything back into the correct place. Come to think of it. My itunes library was corrupted as well and I had to create another one of those. So I have 4 libraries of music and photos filling up my 120 gig hard drive. Sounds like a good time for a fresh install upgrade right???
TimAnyway.....now, I just purchased a copy of Leopard.
iPhoto '08 is not included on the Leopard upgrade - it is on the iLife '08 upgrade (a separate purchase from the OS)
And upgrading the software will not fix a corrupted library - you need to have a good clean working library before you upgrade iPhoto
LN -
New Hard Drive- Should I use Time Machine for "fresh" install?
I have a first generation Early 2008 MacbookPro. Warranty just ended and I want to replace the hard drive w/ the Seagate Momentus XT Hybrid. I'm getting a bunch of spin wheel action and things are just running slowly/sluggish. I'm questioning whether or not I should just do a real "fresh" install and load my applications onto the new drive or use TimeMachine. If I use TM am I not adding all the stuff/files that are not needed? Am I adding bloat that I've collected over the past couple of years? Is it better to start w/ a new clean operating system? I do have CS5 and some photo programs that I think I can reinstall. Anyway I wanted to get people's perspective.
Message was edited by: mikkedIt's usually best to clean your system up, and deal with any problems before doing major surgery.
With any other scenario, if something goes wrong, how will you know what it was, much less how to fix it?
I'd start with this: [Intel-based Macs: Using Apple Hardware Test|http://support.apple.com/kb/HT1509].
Then Verify your internal HD, and repair your Time Machine drive, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Then run a +*Repair Permissions+* on your internal HD, via Disk Utility.
Then replace the drive, do a full system restore and run for a while to be sure the new drive and everything else is ok. See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details.
Then start deleting the apps and files you don't need.
Note that, unlike Windoze, leftover files and apps may take up a bit of space, but don't cause any performace problems, unless they're actually running.
The main problems with trying to transfer things selectively are:
Permissions. If you install OSX and set up a user account, that account, even if it has the same name, may not have permission to restore the files on your backups or other drives.
Applications. Simple apps can be transferred individually, such as by restoring from Time Machine. Complex ones usually can't, as their installers put other files in other places. If you don't know what and where they all are, and restore them, too, the app won't work properly, if at all. But if you have all the original discs (and serial numbers/purchase keys), you can just reinstall them. -
I just purchased a macbook pro and was wondering about an install disk. It seems to be missing some of the applications that should be on it from a fresh install. I was wondering if I would have to purchase a new OS and do a fresh install?
Ahhh, well you never mentioned that before. You need to contact your friend from whom you purchased the computer. He/She should have any and all install discs for any third-party software included as well as for OS X and the original pre-installed software.
Apple will gladly sell you replacements for any discs that did come with the computer originally, but they will not do anything for you because you purchased the computer used. If it's in warranty still, then you can get any warranty covered things taken care of through AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site. -
Should I just upgrade or do a delete and fresh install?
Ok I have my copy of Leopard and I'm ready to install on my MacBook. Should I just do an upgrade, or backup my files and do a complete delete and fresh install of Leopard?
What did you do, and why?
Thanks
DaveHaving done a lot of reading on this issue at many forums and sites (like MacFixIt) before I tackled the upgrade, I found the following:
1) Do not do a default upgrade.
2) After people had a chance to test the upgrade paths once 10.5 came out, the majority of comments I read suggested the archive and install.
3) The erase and install was highly recommended at first, but after a few days, when the dust settled, this recommendation didn't appear as much.
My first machine, I did a bootable backup and then an erase and install. All went well until the migrate wizard started copying files from the backup - it couldn't successfully restore one user's files (and it turned out to be me, with admin rights), so I had to manually set myself up. Fortunately, this was a test machine, so the problem didn't bother me. For the two other macs I have, I did an archive and install, and in both cases everything worked perfectly. If you go this route, be sure to delete the "previous systems" folder once you are satisfied with the upgrade. -
Following an Apple Support Team member's advice, I retrieved as many files as I could and erased and repaired the HD before completing a fresh install from a bootable USB. Once I restored all of my software I set it backing up to Time Machine over night only to find that it had crashed and restarted over night before that had completed. I attach the crash report below:
Anonymous UUID: F1CB4D58-C5DE-D8BB-D543-3270C7724738
Wed Oct 30 21:51:58 2013
panic(cpu 2 caller 0xffffff80070dc19e): Kernel trap at 0xffffff80071c5e3d, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000001018, CR3: 0x0000000029716000, CR4: 0x0000000000000660
RAX: 0xffffff81d7fa3740, RBX: 0xffffff80368dc8c2, RCX: 0x0000000000001000, RDX: 0xffffff8027862650
RSP: 0xffffff81d7fa3720, RBP: 0xffffff81d7fa3770, RSI: 0x0000000000000005, RDI: 0xffffff8027862650
R8: 0xffffff81d7fa3490, R9: 0xffffff81d7fa348e, R10: 0x0000000000002000, R11: 0x000000000000065e
R12: 0xffffff80368dc8f0, R13: 0x0000000000000000, R14: 0xffffff80368dc8c2, R15: 0xffffff80368dc8e8
RFL: 0x0000000000010202, RIP: 0xffffff80071c5e3d, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000001018, Error code: 0x0000000000000002, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81d7fa33b0 : 0xffffff8007022f69
0xffffff81d7fa3430 : 0xffffff80070dc19e
0xffffff81d7fa3600 : 0xffffff80070f3606
0xffffff81d7fa3620 : 0xffffff80071c5e3d
0xffffff81d7fa3770 : 0xffffff80071db854
0xffffff81d7fa37c0 : 0xffffff80071daf60
0xffffff81d7fa3800 : 0xffffff80071e1fa0
0xffffff81d7fa3830 : 0xffffff80071d9e8f
0xffffff81d7fa38f0 : 0xffffff80073611e4
0xffffff81d7fa3a00 : 0xffffff80073697cb
0xffffff81d7fa3bd0 : 0xffffff80071fc9db
0xffffff81d7fa3c30 : 0xffffff80071d544b
0xffffff81d7fa3cb0 : 0xffffff80071d4da4
0xffffff81d7fa3d70 : 0xffffff80071c2ebf
0xffffff81d7fa3f50 : 0xffffff800743de23
0xffffff81d7fa3fb0 : 0xffffff80070f3e06
BSD process name corresponding to current thread: backupd
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000006e0
Model: iMac11,3, BootROM IM112.0057.B01, 4 processors, Intel Core i5, 2.8 GHz, 16 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Hub
USB Device: My Passport 070A
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:What else do you need?
Crashed again overnight during back-up:
Anonymous UUID: F1CB4D58-C5DE-D8BB-D543-3270C7724738
Fri Nov 1 00:25:41 2013
panic(cpu 2 caller 0xffffff80184dc19e): Kernel trap at 0xffffff80187cf663, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000008014, CR3: 0x000000002b62c000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000008000, RCX: 0xffffff81e9e8bcc8, RDX: 0x0000000000000001
RSP: 0xffffff81e9e8bc60, RBP: 0xffffff81e9e8bcb0, RSI: 0xffffff8042096108, RDI: 0x0000000000008000
R8: 0xffffff81e9e8bcd0, R9: 0xffffff81e9e8be70, R10: 0x000000000000064e, R11: 0x0000000000000297
R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000000, R15: 0xffffffffffffffff
RFL: 0x0000000000010202, RIP: 0xffffff80187cf663, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000008014, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81e9e8b8f0 : 0xffffff8018422f69
0xffffff81e9e8b970 : 0xffffff80184dc19e
0xffffff81e9e8bb40 : 0xffffff80184f3606
0xffffff81e9e8bb60 : 0xffffff80187cf663
0xffffff81e9e8bcb0 : 0xffffff80187cf310
0xffffff81e9e8bd00 : 0xffffff80187cea6f
0xffffff81e9e8bde0 : 0xffffff80185ff47a
0xffffff81e9e8be50 : 0xffffff80187bf04c
0xffffff81e9e8bec0 : 0xffffff80187bc6de
0xffffff81e9e8bf10 : 0xffffff80187bee5a
0xffffff81e9e8bf50 : 0xffffff801883de23
0xffffff81e9e8bfb0 : 0xffffff80184f3e06
BSD process name corresponding to current thread: mdworker
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000018200000
Kernel text base: 0xffffff8018400000
System model name: iMac11,3 (Mac-F2238BAE)
System uptime in nanoseconds: 285206678247
last loaded kext at 264611740123: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f9a865000, size 65536)
last unloaded kext at 114432919226: com.apple.driver.AppleUSBUHCI 650.4.0 (addr 0xffffff7f9909b000, size 65536)
loaded kexts:
com.apple.filesystems.msdosfs 1.9
com.apple.filesystems.smbfs 2.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.AMDRadeonX3000 1.1.4
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.kext.AMD5000Controller 1.1.4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AirPort.Atheros40 700.74.5
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.driver.IOBluetoothHIDDriver 4.2.0f6
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0 -
I have a mid-2010 MacBook Pro 7,1 and am replacing the HD. I want to do a fresh install of Snow Leopard but don't have the disks that came with my computer. Is the retail version of Snow Leopard what I need or are the original install disks that came with the computer different?
Thanks.You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s. -
How to run downloaded drivers on Fresh Install of Labview 6.1 on a Mac G4 OS 9
I have just completed a fresh install of Labview 6.1 on an Macintosh G4 running OS9. I can run it and it seems to work just fine. I downloaded some drivers for an oscilloscope (HP 546XX) to run with an HP 54603b. When I installed, I went to open the 'Get Started.VI' I get a freeze and have to force quit out of labview. I am not sure how to resolve this. I am pretty sure that it is independent of the device, since I can open the vi's at least on another computer with no hardware attached. So I guess to boil my situation down. I have 2 questions:
-How do I get a fresh install on a mac G4 OS 9 to run downloaded drivers from the internet
-How do I ensure that I have the hardware configured on
a macintosh to run properly.
I really have little experience with macs so I am not really sure what my options are or what could be the problem so any assistance would be much appreciated.Hmmm. I wonder if NI-VISA isn't installed correctly on this machine.
When LabVIEW loads a VI that uses a VISA name control on the front panel, it queries VISA for the installed devices. Sometimes this takes a few seconds, but maybe in your case, something has been corrupted and it's hanging.
To try to narrow this down, first run the separate program "VISAConfig". This should list your devices. If this works, this means it's pretty likely that VISA is installed correctly.
Next, run LabVIEW. On an empty front panel, select the "Controls->I/O->VISA Resource Name" and place it on the front panel. When you click on the arrow on this control, you should see a list of your devices. If this works, then that indicates that LabVIEW is successfully talking
to the VISA software.
If both of those succeeded, then we have to take a closer look at this particular instrument driver. Can you drop other VIs (say, Initialize or Close) without hanging?
If either of the first two steps fail, I'd suggest that you reinstall the VISA software. You may want to try the latest version of NI-VISA (from ni.com), but first confirm that it supports LabVIEW 6.1.
I hope this helps.
Brian -
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
Lost Beats Audio Control Panel, Windows Experience Index and HP Power Manager on fresh install...
HP Pavilion m6-1035dx, product B5S06UA#ABA
Please help! I installed a 240gb SanDisk Extreme SSD and a fresh install of Win 7 home premium 64-bit OEM. I did not reinstall the factory OS and all that goes along with it. I have managed to reinstall all drivers (it seems) but am having the following problems: 1) I have installed IDT HD Audio Driver sp56953 but it does not provide the Beats Audio control panel, any idea how to get it? 2) The Windows Experience Index will not provide a performance evaluation, something in the system is providing it with an error message when it attempts to rate the system and it stops. 3) I have installed HP Power Manager sp57398 and can bring up the control panel but the changes I indicate will not stay applied, when I bring up Power Manager again it show that no selections are made. I knew this fresh install was going to provide headaches, please help if you can. Thanks.I suspect this may all be related to a common cause.
When updating the windows experience index, what is the error message you receive?
Has the video card driver been installed? It is necessary for the windows experience index to complete.
Also, ensure the HP Software Framework is installed. It is under the Software Solutions category.
You did a clean install of Windows 7. Has all the software and drivers for Windows 7 from HP been installed? Here is a link should you need it.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Satellite L655 - Sound not working on fresh install of Windows 7 Pro x64
Howdy all,
I purchased an L655-S5111 from Newegg that was on sale, put an SSD into it, and then installed a legitimate copy of Windows 7 Professional 64-bit I received from my current employer (I'm an IT guy). I've updated to the latest BIOS revision (1.70), and I've got all Windows updates installed, all drivers installed, including the correct Conexant HD Audio and ATI HDMI Audio drivers. Unfortunately, sound does not work. Sound worked briefly when I first installed Windows 7, then I muted it until I could get it set up with headphones. When I unmuted it, it had ceased to work.
This laptop is less than 3 weeks old at this point, and I get no audio over headphones or speakers, although Windows clearly shows no issues with the drivers, they're the latest version, on a fresh install, and I can see the audio in the mixer playing. The microphone built-in to the laptop does pick up sound as well. I believe that this is most likely not an issue of physical interconnection, but more likely a software level issue, I'm just having trouble identifying where it is at.
I also have no related error messages anywhere in the event logs.
Message was edited by: ADMINI have two problems with installing the recovery image:
1) I didn't get a copy of the recovery media with the system
2) The recovery media would install Windows 7 Home Premium 64bit which is what came with the laptop.
Since I have legitimately licensed copies of Windows 7 Pro/Enterprise 64-bit, I would much rather install that. Since I used the drivers and software from the Toshiba website for this particular model, it should be working. There should be no functional difference between the recovery media and a fresh Windows install from the Microsoft-provided Windows media and Toshiba provided drivers from their website.
As you can see in the sysinfo (I'm assuming Keany the respondent is the admin that approved my post and edited it, thus had access to the data which was removed) I have all the Toshiba software and drivers installed, identically to if this was the recovery image, I just have it on a different edition of Windows 7.
I'm open to any other suggestions, but unfortunately it is not possible to do the above. -
Very slow Mac, compared to when running a fresh install
I was wondering if anyone could help me diagnose the reason for my mac being so slow. (Eg 1.5-3 minute boot up as opposed to 15-20 seconds) And why it takes a long time to load a lot of things. I have restored this from a time machine partition, so I believe something has transferred over incorrectly resulting in this general sluggishness of the system.
I have tried disabling all Startup items, disconnecting all external devices, but to no real success.
Here's the boot log of the system below, where I've noticed it hangs after posting FIPS success.
I was wondering if anyone could point me to any of the things that look suspicious? I've tried, but I haven't been able to find out what is causing it, as I believe the process that is causing this sluggishnesh begins at startup.
30/05/13 4:24:10.000 PM bootlog[0]: BOOT_TIME 1369895050 0
30/05/13 4:24:25.000 PM kernel[0]: PMAP: PCID enabled
30/05/13 4:24:25.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
30/05/13 4:24:25.000 PM kernel[0]: vm_page_bootstrap: 1993882 free pages and 86886 wired pages
30/05/13 4:24:25.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
30/05/13 4:24:25.000 PM kernel[0]: zone leak detection enabled
30/05/13 4:24:25.000 PM kernel[0]: standard timeslicing quantum is 10000 us
30/05/13 4:24:25.000 PM kernel[0]: standard background quantum is 2500 us
30/05/13 4:24:25.000 PM kernel[0]: mig_table_max_displ = 74
30/05/13 4:24:11.661 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
30/05/13 4:24:25.000 PM kernel[0]: TSC Deadline Timer supported and enabled
30/05/13 4:24:25.000 PM kernel[0]: corecrypto kext started!
30/05/13 4:24:25.000 PM kernel[0]: Running kernel space in FIPS MODE
30/05/13 4:24:25.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
30/05/13 4:24:11.664 PM com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
30/05/13 4:24:11.667 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
30/05/13 4:24:24.316 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Sandbox
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Quarantine
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
30/05/13 4:24:25.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
30/05/13 4:24:25.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
30/05/13 4:24:25.000 PM kernel[0]: MAC Framework successfully initialized
30/05/13 4:24:25.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
30/05/13 4:24:25.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
30/05/13 4:24:25.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1223PFM64 (36 cpu) 0xf80000000, 0x80000000
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration begin ]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
30/05/13 4:24:25.000 PM kernel[0]: console relocated to 0xfc0010000
30/05/13 4:24:25.000 PM kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
30/05/13 4:24:25.000 PM kernel[0]: Thunderbolt runtime power conservation disabled.
30/05/13 4:24:25.000 PM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
30/05/13 4:24:25.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
30/05/13 4:24:25.000 PM kernel[0]: rooting via boot-uuid from /chosen: 9DADC387-C048-3E67-AFB3-3344605810FC
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
30/05/13 4:24:25.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
30/05/13 4:24:25.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe912174; max speed s800.
30/05/13 4:24:25.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Macintosh HD@2
30/05/13 4:24:25.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 1
30/05/13 4:24:25.000 PM kernel[0]: Kernel is LP64
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): MY69FD72DY04KS 0x3f0 0x5a11 0x100
30/05/13 4:24:25.000 PM kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.297317: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.303430: Atheros: mac 448.3 phy 342.14 radio 0.0
30/05/13 4:24:25.000 PM kernel[0]: 1.304325: Use hw queue 0 for WME_AC_BE traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.305204: Use hw queue 1 for WME_AC_BK traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306047: Use hw queue 2 for WME_AC_VI traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306882: Use hw queue 3 for WME_AC_VO traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.307725: Use hw queue 8 for CAB traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.308463: Use hw queue 9 for beacons
30/05/13 4:24:25.000 PM kernel[0]: 1.309205: wlan_vap_create : enter. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1
30/05/13 4:24:25.000 PM kernel[0]: 1.310853: wlan_vap_create : exit. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1.
30/05/13 4:24:27.000 PM kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:21:ba:13
30/05/13 4:24:27.000 PM kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:5f:b3:53
30/05/13 4:24:27.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
30/05/13 4:24:27.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
30/05/13 4:24:33.000 PM kernel[0]: Previous Shutdown Cause: 5
30/05/13 4:24:33.000 PM kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
30/05/13 4:24:33.317 PM hidd[48]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
30/05/13 4:24:33.863 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.864 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.971 PM mDNSResponder[39]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
30/05/13 4:24:34.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
30/05/13 4:24:34.000 PM kernel[0]: DSMOS has arrived
30/05/13 4:24:40.810 PM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
30/05/13 4:24:40.836 PM blued[57]: Read the UHE Info
30/05/13 4:24:40.836 PM blued[57]: Read version 2 info. Number of devices:2
30/05/13 4:24:40.836 PM blued[57]: Class of device: 0x2580
30/05/13 4:24:40.836 PM blued[57]: Device name: 'My Mosse-Robinson’s Mouse' length:30
30/05/13 4:24:40.836 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.836 PM blued[57]: Found a device with PID:0x030d VID:0x05ac
30/05/13 4:24:40.837 PM blued[57]: Class of device: 0x2540
30/05/13 4:24:40.837 PM blued[57]: Device name: 'My Mosse-Robinson’s Keyboard' length:33
30/05/13 4:24:40.837 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.837 PM blued[57]: Found a device with PID:0x0239 VID:0x05ac
30/05/13 4:24:41.000 PM kernel[0]: macx_swapon SUCCESS
30/05/13 4:24:41.529 PM WindowServer[88]: Server is starting up
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 released (1 references)
30/05/13 4:24:41.538 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.538 PM WindowServer[88]: init_page_flip: page flip mode is on
30/05/13 4:24:41.538 PM WindowServer[88]: init_resolution: resolution is enabled
30/05/13 4:24:41.694 PM WindowServer[88]: mux_initialize: Couldn't find any matches
30/05/13 4:24:41.706 PM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
30/05/13 4:24:41.706 PM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
30/05/13 4:24:41.733 PM WindowServer[88]: WSMachineUsesNewStyleMirroring: false
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.734 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x5 for display 0x042801c0
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x6 for display 0x003f0040
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x7 for display 0x003f003f
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x8 for display 0x003f003e
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x9 for display 0x003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (3587, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: CGXPerformInitialDisplayConfiguration
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; Vendor 0x610 Model 0xa007 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: MappedDisplay Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.742 PM WindowServer[88]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3587,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, accelerator 0x0000481b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
30/05/13 4:24:41.911 PM hidd[48]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
30/05/13 4:24:41.911 PM WindowServer[88]: Unable to open IOHIDSystem (e00002bd)
30/05/13 4:24:41.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
30/05/13 4:24:42.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
30/05/13 4:24:43.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
30/05/13 4:24:43.372 PM com.apple.SecurityServer[15]: Session 100000 created
30/05/13 4:24:43.740 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:44.615 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.yVQnGnD to blued.plist, errno was 21.
30/05/13 4:24:44.902 PM WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042801c0 device: 0x101ed8a10 isBackBuffered: 1 numComp: 3 numDisp: 3
30/05/13 4:24:46.000 PM kernel[0]: NTFS driver 3.10 [Flags: R/W].
30/05/13 4:24:46.000 PM kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
30/05/13 4:24:48.639 PM airportd[95]: _processDLILEvent: en1 attached (down)
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff801c6a2000
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
30/05/13 4:24:48.765 PM com.apple.SecurityServer[15]: Entering service
30/05/13 4:24:48.821 PM awacsd[58]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
30/05/13 4:24:48.822 PM loginwindow[42]: Login Window Application Started
30/05/13 4:24:48.824 PM awacsd[58]: InnerStore CopyAllZones: no info in Dynamic Store
30/05/13 4:24:48.878 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
30/05/13 4:24:48.881 PM loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:48.886 PM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2D_IPC: Loaded
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2DInitialize succeeded
30/05/13 4:24:48.909 PM mDNSResponder[39]: Adding registration domain 167899042.members.btmm.icloud.com.
30/05/13 4:24:48.938 PM awacsd[58]: Configuring lazy AWACS client: 167899042.p04.members.btmm.icloud.com.
30/05/13 4:24:48.974 PM digest-service[114]: label: default
30/05/13 4:24:48.975 PM digest-service[114]: dbname: od:/Local/Default
30/05/13 4:24:48.975 PM digest-service[114]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:48.975 PM digest-service[114]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:48.976 PM digest-service[114]: digest-request: uid=0
30/05/13 4:24:48.993 PM rpcsvchost[118]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
30/05/13 4:24:48.995 PM digest-service[114]: digest-request: init request
30/05/13 4:24:48.998 PM digest-service[114]: digest-request: init return domain: BUILTIN server: LOCALHOST
30/05/13 4:24:49.008 PM aosnotifyd[119]: bootstrap_look_up failed (44e)
30/05/13 4:24:49.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:49.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:49.000 PM kernel[0]: 39.409929: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:49.000 PM kernel[0]: 39.409936: switchVap from 1 to 1
30/05/13 4:24:49.176 PM kdc[45]: label: default
30/05/13 4:24:49.176 PM kdc[45]: dbname: od:/Local/Default
30/05/13 4:24:49.177 PM kdc[45]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:49.177 PM kdc[45]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:49.190 PM kdc[45]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
30/05/13 4:24:49.227 PM kdc[45]: KDC started
30/05/13 4:24:49.389 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
30/05/13 4:24:49.389 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:49.409 PM configd[17]: network changed: DNS*
30/05/13 4:24:49.410 PM configd[17]: setting hostname to "My-iMac.local"
30/05/13 4:24:49.000 PM kernel[0]: 40.066078: performCountryCodeOperation: Not connected, scan in progress[0]
30/05/13 4:24:49.000 PM kernel[0]: 40.068173: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:49.809 PM InternetSharing[46]: objc[46]: Object 0x7fcb18d007f0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
30/05/13 4:24:49.829 PM com.apple.InternetSharing[46]: *** no interface for service
30/05/13 4:24:50.202 PM mds[38]: (Normal) FMW: FMW 0 0
30/05/13 4:24:50.369 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.tGGJbEu to blued.plist, errno was 21.
30/05/13 4:24:50.370 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.fqIWXwi to blued.plist, errno was 21.
30/05/13 4:24:50.652 PM appleeventsd[54]: main: Starting up
30/05/13 4:24:50.660 PM awacsd[58]: KV HTTP 0
30/05/13 4:24:51.219 PM locationd[43]: NOTICE,Location icon should now be in state 0
30/05/13 4:24:51.236 PM sudo[135]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /dev/disk0s4
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: 42.397428: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:51.000 PM kernel[0]: AirPort: RSN handshake complete on en1
30/05/13 4:24:52.001 PM com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
30/05/13 4:24:52.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
30/05/13 4:24:53.916 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:53.932 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.533 PM WindowServer[88]: Created shield window 0xa for display 0x042801c0
30/05/13 4:24:54.533 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.534 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.553 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.550 PM launchctl[142]: com.apple.findmymacmessenger: Already loaded
30/05/13 4:24:54.560 PM com.apple.SecurityServer[15]: Session 100003 created
30/05/13 4:24:54.795 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.796 PM hidd[48]: CGSShutdownServerConnections: Detaching application from window server
30/05/13 4:24:54.796 PM hidd[48]: CGSDisplayServerShutdown: Detaching display subsystem from window server
30/05/13 4:24:54.808 PM loginwindow[42]: Login Window Started Security Agent
30/05/13 4:24:54.863 PM fseventsd[49]: Logging disabled completely for device:1: /Volumes/Recovery HD
30/05/13 4:24:55.143 PM configd[17]: network changed: v4(en0+:192.168.2.180) DNS+ Proxy+ SMB
30/05/13 4:24:55.280 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
30/05/13 4:24:55.000 PM kernel[0]: Sandbox: sandboxd(157) deny mach-lookup com.apple.coresymbolicationd
30/05/13 4:24:53.798 PM ntpd[112]: proto: precision = 1.000 usec
30/05/13 4:24:53.985 PM com.apple.InternetSharing[46]: InternetSharing: com.apple.InternetSharing.broadcast-0 has been started
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: BCAST is ready [en0, mtu=1500, 2 DNS server(s), 0 DNSv6 server(s)]
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: removed addr=fe80::e6ce:8fff:fe5f:b353 on en1
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: added addr=192.168.3.1 mask=255.255.255.0 on bridge0
30/05/13 4:24:53.000 PM kernel[0]: 45.946953: Invoking setHOST_AP_MODE
30/05/13 4:24:53.000 PM kernel[0]: 45.946957: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 45.960195: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.960200: switchVap from 1 to 6
30/05/13 4:24:53.000 PM kernel[0]: 45.979212: osif_com_vap_event_handler vap delete event
30/05/13 4:24:53.000 PM kernel[0]: 45.979219: deleteVap ****SYNC VAP DELETE SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.982272: Invoking setRSN_CONF
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:53.000 PM kernel[0]: en1: BSSID changed to e4:ce:8f:5f:b3:53
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 46.007045: Invoking getKEY_RSC
30/05/13 4:24:53.000 PM kernel[0]: en1: promiscuous mode enable succeeded
30/05/13 4:24:53.000 PM kernel[0]: bridge_attach_protocol: en1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DNS subnet=192.168.3/24 on bridge0]
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[0]: 192.168.2.1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[1]: 192.168.2.1
30/05/13 4:24:54.095 PM SecurityAgent[153]: This is the first run
30/05/13 4:24:54.095 PM SecurityAgent[153]: MacBuddy was run = 0
30/05/13 4:24:54.122 PM SecurityAgent[153]: User info context values set for My
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DHCP subnet=192.168.3/24 on bridge0 mtu=1500 <---> en0 mtu=1500] max-mss=1460
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: dns[0]: 192.168.3.1
30/05/13 4:24:54.309 PM com.apple.InternetSharing[46]: started "natpmpd"
30/05/13 4:24:54.457 PM loginwindow[42]: Login Window - Returned from Security Agent
30/05/13 4:24:54.459 PM loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
30/05/13 4:24:54.484 PM loginwindow[42]: USER_PROCESS: 42 console
30/05/13 4:24:55.020 PM named[160]: starting BIND 9.8.3-P1 -c /etc/com.apple.named.proxy.conf -f
30/05/13 4:24:55.020 PM named[160]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.020 PM named[160]: BIND 9 is maintained by Internet Systems Consortium,
30/05/13 4:24:55.020 PM named[160]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
30/05/13 4:24:55.020 PM named[160]: corporation. Support and training for BIND 9 are
30/05/13 4:24:55.020 PM named[160]: available at https://www.isc.org/support
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.587 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:55.587 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:55.897 PM com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 252
30/05/13 4:24:55.989 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.000 PM kernel[0]: utun_ctl_connect: creating interface utun0
30/05/13 4:24:56.169 PM named[160]: running
30/05/13 4:24:56.170 PM UserEventAgent[143]: cannot find useragent 1102
30/05/13 4:24:56.171 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: UserName
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: GroupName
30/05/13 4:24:56.238 PM com.apple.launchd.peruser.501[164]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/05/13 4:24:56.241 PM loginwindow[42]: Connection with distnoted server was invalidated
30/05/13 4:24:56.249 PM distnoted[168]: # distnote server agent absolute time: 48.352954504 civil time: Thu May 30 16:24:56 2013 pid: 168 uid: 501 root: no
30/05/13 4:24:56.526 PM blued[57]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
30/05/13 4:24:56.664 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:57.425 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:58.103 PM BezelServices 236.3[42]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
30/05/13 4:24:58.105 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=116
30/05/13 4:24:58.122 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:58.278 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:58.278 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:58.751 PM com.apple.launchd.peruser.501[164]: (com.apple.afpstat-qfa[211]) Exited with code: 2
30/05/13 4:24:58.835 PM NetworkBrowserAgent[217]: Starting NetworkBrowserAgent
30/05/13 4:24:59.684 PM bootpd[161]: server name My-iMac.local
30/05/13 4:24:59.684 PM bootpd[161]: interface en0: ip 192.168.2.180 mask 255.255.255.0
30/05/13 4:24:59.684 PM bootpd[161]: interface bridge0: ip 192.168.3.1 mask 255.255.255.0
30/05/13 4:25:00.083 PM bootpd[161]: service time 0.000010 seconds
30/05/13 4:25:00.395 PM com.apple.launchd.peruser.501[164]: (com.apple.mrt.uiagent[201]) Exited with code: 255
30/05/13 4:25:00.894 PM fseventsd[49]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x10d075518)
30/05/13 4:25:00.894 PM fseventsd[49]: log dir: /Volumes/External/.fseventsd getting new uuid: 1977A513-201A-4A9B-8A40-AB9A585F82AB
30/05/13 4:25:01.093 PM mDNSResponderHelper[74]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:02.998 PM apsd[60]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
30/05/13 4:25:03.069 PM configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
30/05/13 4:25:03.069 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:03.069 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.125 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:04.171 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:04.171 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.584 PM GrowlLauncher[195]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
30/05/13 4:25:06.238 PM com.apple.SecurityServer[15]: Session 100005 created
30/05/13 4:25:06.302 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:06.302 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.699 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:10.699 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.886 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:11.000 PM kernel[0]: 62.766797: osif_connect_event: sta: d8:a2:5e:53:4d:68 arrive message posted
30/05/13 4:25:11.000 PM kernel[0]: 62.783435: Invoking setSTA_AUTHORIZE
30/05/13 4:25:12.321 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:12.321 PM bootpd[161]: service time 1.602424 seconds
30/05/13 4:25:12.321 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:13.253 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:13.253 PM bootpd[161]: service time 0.932620 seconds
30/05/13 4:25:14.366 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=115
30/05/13 4:25:14.818 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
30/05/13 4:25:14.818 PM com.apple.usbmuxd[27]: _BrowseReplyReceivedCallback (thread 0x7fff778fd180): Error doing DNSServiceResolve(): -65540
30/05/13 4:25:15.492 PM Growl[250]: Setup timer, this should only happen once
30/05/13 4:25:15.493 PM Growl[250]: Next image check no earlier than 24 hours from 2013-05-29 13:59:00 +0000
30/05/13 4:25:15.584 PM Image Capture Extension[253]: Another instance of 'Image Capture Extension' is already running! This instance is exiting.
30/05/13 4:25:15.585 PM com.apple.launchd.peruser.501[164]: ([0x0-0x17017].com.apple.ImageCaptureExtension2[253]) Exited with code: 1
30/05/13 4:25:15.585 PM HPScanner[230]: ERROR: Image Capture Extension went away!
30/05/13 4:25:16.174 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[147]) Exit timeout elapsed (20 seconds). Killing
30/05/13 4:25:18.125 PM WindowServer[88]: disable_update_likely_unbalanced: UI updates still disabled by application "SystemUIServer" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
30/05/13 4:25:19.620 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:19.620 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:20.909 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 17.78 seconds (server forcibly re-enabled them after 1.00 seconds)
30/05/13 4:25:21.195 PM BetterSnapTool[237]: kCGErrorIllegalArgument: CGSUnregisterWindowWithSystemStatusBar: Invalid window
30/05/13 4:25:21.225 PM configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
30/05/13 4:25:21.228 PM configd[17]: network changed: v4(en0:192.168.2.180, en1+:169.254.217.249) DNS Proxy SMB
30/05/13 4:25:21.664 PM UserEventAgent[11]: Captive: Online (HostAP mode)
30/05/13 4:25:21.667 PM configd[17]: network changed: v4(en0:192.168.2.180, en1) DNS Proxy SMB
30/05/13 4:25:21.859 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:22.003 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:25.674 PM mDNSResponderHelper[259]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:26.937 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:29.935 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:31.946 PM com.apple.SecurityServer[15]: Session 100009 created
30/05/13 4:25:32.086 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:32.268 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.18 seconds (server forcibly re-enabled them after 1.00 seconds)1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists. -
Fresh Install of iTunes and some Questions
I just did a fresh install, set up home sharing, and did an iCloud match so my whole library is in the cloud. I have my library file stored locally but my music files on my NAS. Here are my questions:
1. I want to install iTunes on my wifes computer, set up iTunes match for her, set up shaing. She will have a "shell" setup where notjing is stored as she is sharing with me and accessing the cloud. Do I need to set up that computer under my user id even though she has her own? I figure thats the only way to get her to iTunes match that I have?
2. How do I do this all? Meaning, I will have a local library file for her but I need to point her laptop to the NAS with the files on them. If I change her iTunes media file to that location on the NAS and check keep organized, will it screw up the files I have there? I noticed when I did that on my PC it moved some fles around and I had to reassociate lost files to songs. Took hurs. Would iTunes have done that automatically for me somehow? Should I not check the keep organized for her as she will not be adding music anyhow? What is the harm either way?
3. How do I see my pictures on my ATV unit? I thought I used to be able to but don't see an "app" on the ATV to do so, just photo stream which I do not want to do. I thought I used to be able to access the pictures stored on my NAS? Am I dreaming this or did it go away? My NAS is an iTunes server and I swear I used to be able to access them from my ATV? All I see on my ATV under my library is music, podcasts and movies.
4. I have my NAS sharing (home sharing) and I can see it on my laptop with iTuenes installed. When I click on it I see only music, no movies or anything else, why is that and is it something to do with home sharing? But, like I said I can see thse movies on ATV under my library. I can also see my playlists on the shared on my laptop but nothing is in them. I think that may be becuase they were set up under another library and now that I hve a new library file, they don't carry over? I don't see any of said playlists in the sttandard iTunes interface under playlists, just under the shared however like I said, no files in them. Also, the share comes and goes as in sometimes I see it sometimes I don't however I am always able to access the NAS from iTunes. Strange, may be network issues?
5. Along those same lines, sometimes the home share just up and dissapears from ATV. Maybe a network issue?
6. Lastly, I just did my first backup/sync to my new laptop with the frsh install of iTunes on it. It gave me some sort of message that I can only sync to one computer and do I want to overwrite or whatever? I said no and it did nothing. After that, I did a back-up however it seemed to go fast and I also did a sunc. The sync was three steps, used to be like six and I did not notice any of my new apps being copied to it. Something is wrong here but not sure what to do, ideas?
Thanks in advance for any and all help.#4 - make sure you are sharing out all the items in your itunes library (music, movies, etc)
you should be able to do that under preferences
you may also want to check if it is pointing to the correct library
#1 - home sharing should work on the LAN w/out the need for signing in; the shared libraries should appear under "shared" in the left sidebar of itunes
think this may resolve the issues you have on #2 as well
#2 - itunes doesnt seem like it's built for that, but if you have any experience, i'd like to hear it. this seems why home sharing is the usually the best route to go and just have one instance of itunes managing the library
but as long as the NAS or any media drives are shared out, connecting to it should not be a problem. it's the writing to the itunes library that's the issue. i haven't used Match so can't help there.
depending on your OS, you can either ctrl-click or option-click on the itunes icon,
which will also give you the option of selecting a library location upon launching itunes
you can navigate to the location of the library file and point it to that.
technically, you could do that but i believe the actual library has to be stored locally
as long as you still have all the media, then you can just rebuild the library
but for locally shared items, as in, all inside the home, i would leave icloud out of the equation
just use itunes sharing and it should be fine -
Why is Mavericks running so slowly after a fresh install on my Macbook Pro?
I have a 13-inch, Early 2011 Macbook Pro.
Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
Any help is greatly appreciated!
Here is the Etrecheck output:
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 319.21 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898 disk2 : (8.09 GB)
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
[System] cx.pow.firewall.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] cx.pow.powd.plist 3rd-Party support link
User Login Items:
iTunesHelper
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Trusteer Endpoint Protection 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Smultron: Version: 3.8.4 - SDK 10.0 3rd-Party support link
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 412.18 GB
Total number of backups: 4
Oldest backup: 2014-01-07 12:40:04 +0000
Last backup: 2014-01-20 17:50:35 +0000
Size of backup disk: Excellent
Backup size 412.18 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
17% Mail
8% mtmd
5% mds_stores
3% mds
2% iTunes
Top Processes by Memory:
217 MB Mail
184 MB com.apple.WebKit.WebContent
139 MB softwareupdated
115 MB mds_stores
106 MB Google Chrome
Virtual Memory Information:
186 MB Free RAM
1.21 GB Active RAM
983 MB Inactive RAM
1.07 GB Wired RAM
7.85 GB Page-ins
326 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Fresh Install of Mountain Lion how do I export users from Lion Server
I've been having some issues with Lion Server, mainly Kerberos related and Profile Manager. So I want to start fresh with Mountain Lion.
I've installed ML and Server, and profile manager is working now for the first time (yay!)
Now I want to Import all my existing Open Directory users from Lion, I don't want to Import the entire OD though because I think some of my kerberos issues will just get carried over to ML.
I would like to just export the Users to a file then use ML server to import users from file, but I can't see an option to export in Lion Server, I have tried doing it from WGM on Lion but the 'users' file is not recognised by ML serverGreat thanks for the reply, I'll try it tonight when everyone has logged off.
Yeah I was very pleased initially with kerberos on Lion, it worked great to start with, now I'm just getting expired tickets for a default realm when some users log in, yet other users continue to work fine.
I was planning to slowly install Mountain Lion Server and test is thouroghly but I've had a bit of a disaster that if forcing me to go live with ML server quicker than I wanted to!
Basically because on Lion Server I have all the Service Data on a separate drive, and I upgraded to ML server on a backup copy of Lion Server just to see what it was like, though now I've rebooted the original Lion drive but half of the services are now screwwed up because the ML Server must have changed them, so things like Wiki Server and Profile Manager are now broken from the Lion Server boot, they just show "Error Reading Settings"
I realise now I should have moved the Service data back to the local drive before doing a test upgrade so I wouldn't have messed it up! but now it seems like my best way forward is a fresh install of ML Server
Maybe you are looking for
-
I visited the genius bar at my mac store two weeks ago and now I notice two people I don't know are showing up as SHARED on my computer. This is really disturbing to me as I don't know if these people have access to my computer. Could this have hap
-
Issue with language settings and units
Hello All, We are facing the issue where since yetsreday days our language sttings are not working anymore. The characteristics which were loading fine before suddenly started giving error and now there are lot of issue with the special characters. S
-
Af:query component and persisting preference to database
I am using af:query component for search functionality and that component has an saving preference option to store the preference in session. I would like to store/persist the preference to database and retreive them and show to the user when they co
-
Dear All We have activated a docuemnt release workflow for vendor invoices, where the invoice has to be relasaed before a payment is made. How would you suggest we handle the vendor down payments with the payment relase option? Thanks Gayani
-
Multitouch support for trackpad on Windows
Is there any way to enable full multitouch support for the Macbook Pro trackpad under Windows? The two-finger scrolling works perfectly but I miss the three finger swipe and thre-finger flick whenever I boot on Windows.