Should I get a black or white Iphone5?

Should I get a black or white Iphone5? I have never had an iphone before! I am buying on tomorrow!

livvcat wrote:
I'm worried about scrathes, which phone doesn't make them stand out?
The phone that is kept in a case so that it does not get scratched.

Similar Messages

Should I get a black or white ipad mini?

Should I get a black or white ipad mini I will be using it daily?

It's a personal thing. I prefer black. I feel that the white looks cheap....but there are others that feel the exact same way about black.
find a store that has them both and see which one you like the best. 'good or bad' is all cosmetic.

HT5517 i have apple tv and i could play my dvd on my macbook pro but now i cannot i get a black and white box i have vlc which apple store put on for me but thats no good because the film keeps jumping. i am wondering why i cannot play from dvd to apple t

i have had apple tv since last april and i could play films from dvd player from mac book but for some reason this has stopped working from dvd player when i put the dvd player on apple tv i get a black and white screen i can hear the film but i cannot see it, i went to my local store and they but vlc on for me but its terrible the film always jumps every time.
Can anyone now the reason this has happen as i watch film offern but its driving me crazy why i cannot play from macbook pro to dvd player. i have been told it was a sercuity problem with the films so do i use itunes every time i need to watch a film if so then apple tv is a waste of money thanks please help

This is supposed to happen, licensing issue mean that Apple can't AirPlay protected content to other devices. You might try VLC instead of Apples built in DVD player.

How do I get a black and white photo in Photoshop Elements 11?

I have a very old version of Photoshop, release 6 I believe. In that release, I am able to use enhance/brightness and contrast, and when I slide the contrast to 100%, I get a pure black and white image of my photo. I Photoshop 11, which I just purchased today, I am unable to get a pure black and white image, only grayscale. I cut pictures out of wood, and it's fundamentally necessary that I can contrast pictures into pure black and white. How do I do that in Photoshop 11? The first screenshot is what I need in Photoshop 11, the second screen shot is the limitation I'm seeing in Photoshop 11. How do I get a black and white photo??

(I edited this reply because I originally couldn't see the screen shots.)
There was a change made a few versions ago where Brightness and Contrast were improved so that they did not clip values so quickly. This was intended to improve how Brightness and Contrast worked for photographs, but it makes it work less well for purposes such as channel manipulations or printmaking.
In Photoshop there is a Legacy check box in Brightness/Contrast to make it work the "old" way when that is desired. It looks like that check box isn't in Photoshop Elements, which is what you're actually using. I'm not sure if there is a way to get the Legacy behavior in Elements, so you'll want to ask over in the Photoshop Elements forum.

I get a black and white logo and a progress bar after upgrade ipad2 5.01

i get a black and white logo and a progress bar after upgrade ipad2 5.01

See this page : http://support.apple.com/kb/HT4097 - it covers :
iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.

I cant get the black and white apple screen off

every time its not being used or chraged, it goes to a black and white screen with an apple on it.
its not at hold and it is responding but how do i get it off of the screen?
its not working for me at all.
oh... and when ever i try to update my ipod, it never works.
only when i have the cd in there, and i redownload it.
is there any way to skip around any of these steps?
because i really dont want to go through the complicated prosses of downloading the softwear every time the softwear refuses to work.
if you can contact me at my screen name
aim = aheaheahe X core
thanks.
-christan
nano

Welcome to Apple Discussions!
Try these...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
Or, is something else happening?
btabz

TS1363 I recently updated my iphone overnight and today I can't get it to come on, I've tried the restore and nothing works. I've tried syncing with 3 different computers and nothing works. I'm getting the black screen, white apple and a line under that

I updated my phone overnight and now I can't get it to come on. I've tried everything, I have a black screen, white apple and a mine below that looks like it's trying to load but it has stopped. HELP!

You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
So far I have tried the following to no avail:
Checked my pc's device manager - it recognises the device and says it is functioning properly.
Checked the drivers to make sure they are upt to date.
Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
Reinstalled the latest itunes.
Reset the ipod.
Put the ipod into disk mode and reconnected to itunes.
Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
At this point I dont really want to part with another $300 odd dollars for a new one.

My screen flickered and now all I get is black and white pixels - any ideas for a fix before I take to the Genius Bar?

MacBookPro is about 8 years old now so has had a good innings. Last night the screen flickered, and then went off. Turning Mac back on again brought black and white pixels - small rectangles all over the screen. In background is little apple in middle of screen with the round rainbow timer thing vaguely visible. This then sticks and I just have the pixels nothing else.
Any ideas?
I have booked with Genius bar tomorrow but am feeling bereft!
Thanks in advance.

It's certainly a hardware problem that only Apple techs would be able to properly diagnose. Keep your appointment...
Clinton

When opening a new window, I sometimes get a black and white streaks in them. If you click on another window or try to scroll through the black window, it sometimes refreshes and looks normal.

It only happen on one of my computers. This computer actually has a faster processor, more RAM, and a better video card than my laptop which has no problems.

I solved my own problem. :-) I simply needed to change the "size" setting in my add-on "Theme Font & Size Changer" to a smaller number. Now the new windows don't require scrolling to see the entire content. But, I suppose for someone with serious vision problems, they might need to do the same thing, but then break out a magnifying glass to read everything in the window.....

Which ipad should i get black or white ipad

Im conteplating on buying an ipad but I dont know what color to get either black or white . I curently have a White iphone 4s 64gb. HELP!!!???

??/ The color is purely a matter of personal choice - both colors are the exact same device otherwise. How can anyone here possibly help you make a purely personal choice decision?
I mean, if I say "get the black" and you think, yuck, I hate black, then what was the point in even asking the question?

RGB Only Prints in Black and White

My Illustrator CS3 seems to have developed a strange problem. If I create a new RGB based document, a 'Web Document' or a 'Basic RGB Document' for example, and the print it, I only get a black and white print. If I create a CMYK based document it prints just fine. I have also tried creating a CMYK document and converting it to RGB and that prints fine too, but if I create an RGB document and convert to CMYK again I get a black and white print.
I have checked each of the colour profile and print dialog boxes to see if there are any differences bewteen a RGB sourced document and a CMYK sourced document but can't see anything obvious. This problem seems to have developed over the past couple of weeks as it used to print RGB without a problem.
Any help would be much appreciated as I've been going round in circles with this for hours. I should perhaps add that I'm no Illustrator expert!
Thanks.

I have found a solution to the problem by installing and using the PCL 6.0 driver instead of the PostScript driver (interestingly the PostScript driver is recommended by Xerox).
I am guessing that there must be a small error/discrepancy in the Xerox PostScript driver as it works fine in all other applications and indeed even in Illustrator with everything but RGB colour mode.
This also stacks up against the way the problem materialised as it seems that the error is only apparent in the latest driver, the previous driver (as shipped on CD with the printer) works correctly (it was updated by a Microsoft Update Patch originally).
It would be nice to raise this problem with Adobe and Xerox, but I wouldn't know where to start, so I'll stick with the PCL driver.

Poor black and white quality in calendar

Hi there,
Last week I ordered two calendars via iPhoto.
The canlendars only contains black and white photos but the photos in the calendars I received are far from black and white. They have a stron yellow/reddish tint and looks nothing like the pictures I edited.
Is this a general problem with Apple print products that you cannot get true black and white pictures in books, calendars etc.
If so, I believe it should be stated somewhere that you should expect poor print quality from black and white pictures. And if not, is it possible to have my calendars reprinted in a better quality?
Best regards,
Stefan Nielsen

This Apple doucment, iPhoto: Image differences between books and prints, discusses B/W prints and their colorization. However, what you've described is not what they describe so it might be a printing glitch. Contact Apple for a redo.
OT

Raw Black and White (CR2 Cannon) process in color

I'm shooting black and white in raw/cr2 mode, and when I process them through Bridge / CS2, etc., they always come up color, not b&w. The same occurs with Picasa and other raw processing packages. Any ideas how to keep them B&W, rather than converting to it after processing?
thx!!

By its very nature RAW images are color because color is captured by the
sensor and raw is simply the raw data captured by the sensor. If you want
black and white from the camera then you would have to shoot JPG or TIFF if
your camera offers TIFF. Now the black and white marker should be included
in the RAW file so if your use the software that came with your camera then
it is very likely that software would see that marker indicating that you
had black and white turned on and simply convert the color RAW to black and
white and show you that. You might think that you are getting a black and
white RAW file but you aren't it is just the camera makers software seeing a
simple flag and then doing the black and white conversion. Since these flags
are generally proprietary Adobe doesn't read them.
In the end you are better off doing the conversion to black and white
yourself. There are many ways of doing it even in Adobe Camera RAW and you
will always get better results.
Robert

Black and white printing problem on Epson Artisan 50

When I print a black and white photo on glossy paper, I don't get black and white. I get a kind of purple hued black and white. Black text below, however, is perfectly black. So it seems it's not some kind of fault with the ink. I am choosing "black/greyscale" rather than "color". Any idea why this is happening and how to fix it? I have tried printing from different apps, including Preview, and same thing happens. Also different black and white images.

Yes, should be, but I'm not. Epson ink, Epson paper and same problem. The image is black and white. Converted in Photoshop. Print is set to "quality". Epson controls color. Not vivid. Paper is set to glossy. All as it should be.
What I have found by searching is this quote:
"Inkjet printers use their color inks and the black ink to generate B&W prints. But there are some noticeable drawbacks in doing it this way. Namely the possibility of having a color cast on your B&W prints, which is a barely perceptible color tint (usually green or magenta) that prevents your print from being true black & white.”
Other pages confirm this issue, so it seems that you just can't get decent, true black and white with a color printer. At least this color printer.
Do you find that when you print a black and white image you get true black and white with no color cast? Interestingly, I do when I print on plain paper, but not on glossy.

Black and White pic - why is it purple?

Got an old black and white photo that I thought I'd scan then enhance. It's actually BLACK and WHITE (not sepia but maybe more grayish than black)
I scanned it with my Canon MP830 and the scan looked B&W.
I opened it in Photoshop CS3 and it looked B&W.
I cropped it, sharpened it etc etc and it still looked B&W.
But when I printed it (on my Canon MP830) onto Photo Paper Glossy Plus, it's got a distinctly mauve tinge.
What am I doing wrong?
Thanks :-)

Hi everyone. Sorry about the delay answering, just got back from hols.
Before I get to the original subject, I must say I find these Adobe forums very hard to navigate. I've questioned and answered on hundreds of forums over the past 15 years and the Adobe group has a 'style' all of its own. For example, I wanted to post a reply in which I could comment about everyone's responses, but now, as I type this, I can only see PDF's post, so I can't refer back to the two earlier posters, to make detailed comments about their helpful remarks. On most boards, if I hit the REPLY button on the last post, I get to see all previous posts above my response box. Not so here. There doesn't seem to be a PREVIEW button, either, to 'test-run' my reply. Maybe I have the page laid out incorrectly....
OK, back to my question about my scanned B&W photo printing with a purple cast. Sorry but I'm not experienced enough in Photoshop to be able to apply the curves and layers suggestions. However, it's possible that I should have used the Black and White setting on the scanner, rather than Grayscale. I did this because the scan Preview looked quite weird in B&W but appeared better in Grayscale, so that's what I scanned with.
PDF, I'm not sure that my Canon MP830 has the ability to print using only black ink but I'll check it out. I seem to recall that some of myHP printers from way back had the facility, but if the newer Canons have the function, it's not obvious.
Thanks for all your responses. :-)

Should I get a black or white Iphone5?

Similar Messages

Maybe you are looking for