Should i get the sleeve or the case for my macbook air 13 inch. I work under air conditioned room most of the time. I also store my macbook air in an air conditioned room 24/7.

I am a college student but I don't really bring my Mac with me all time. I have read that room temperature affects the macbook air and that it needs an optimum temperature. Some sites suggested sleeves as opposed to cases for room with cold temperature. What do you guys think since I use and store my macbook in a cold room. Thanks!!

Hey kesh888,
Thanks for the question. After reviewing your post, it sounds like you have a question about the operating temperature of a MacBook Air. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Mac notebooks: Operating temperature
The location you are using your notebook should be within these ranges:
Operating temperature: 50° to 95° F (10° to 35° C)
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

I downloaded Photoshop CC 2014 last week and every time I open the program, I get an error message that reads "Adobe Photoshop CC 2014 has stopped working" and it forces me to close the program. How to I resolve this?

I downloaded Photoshop CC 2014 last week and every time I open the program, I get an error message that reads "Adobe Photoshop CC 2014 has stopped working" and it forces me to close the program. How to I resolve this?

Hi Noel,
I'm wondering whether your comment addressed to Lmono was intended for me Tmono.
You ask: "So why didn't you provide the same?"
It just didn't occur to me to do so.
My intent was to report that there was at least one other user encountering a similar problem. It occurred to me that Adobe might be interested in determining the scale of a problem which causes one of their best known products to fail to run quite so completely after a clean install
I also see that I misreported the OS I'm running - its Windows 8.
If there is further information I can provide which might be helpful in determining a solution, if someone could be specific about what would be helpful, then I will try to respond appropriately.
Perhaps the following from the event log:
Faulting application name: Photoshop.exe, version: 15.1.0.148, time stamp: 0x53d97a8f
Faulting module name: igdfcl64.dll, version: 8.1.0.2875, time stamp: 0x507eff6d
Exception code: 0xc0000005
Fault offset: 0x0000000000809283
Faulting process id: 0x1f48
Faulting application start time: 0x01cfca332430f3a7
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\igdfcl64.dll
Report Id: 659ea6c9-3626-11e4-bea1-9c2a70825e62
Faulting package full name:
Faulting package-relative application ID:
The X230 has Intel HD 4000 graphics support built in to the processor. Windows was pretty stubborn about refusing driver updates, but I just managed to get drivers from the Intel site to install and Photoshop is now running, so hopefully I need not try your patience any further.
In case anyone else has a similar problem and stumbles on this the way to install the driver that worked was to:
- download the zip version of the generic driver from Intel
- use the 'have disk' option in the windows dialog to install the driver - other paths in the UI did not work with windows refusing to install the driver.

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!

I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!

were you able to get help on this? I need help on error 5002 as well. thank you

Whenever i try to manually sync my iPhone with a new playlist on iTunes (on my laptop), it always gets stuck in step 7, Waiting for changes to be applied, and then nothing happens. I'm running the latest operating systems on both my iPhone 5 and macbook

Whenever i try to manually sync my iPhone with a new playlist on iTunes (on my laptop), it always gets stuck in step 7, Waiting for changes to be applied, and then nothing happens. I'm running the latest operating systems on both my iPhone 5 and macbook

I really don't appreciate the fact that no one from Apple seems to be dealing with the many, many threads that have started on this topic since iOS 7 came out. In any event, I seem to have solved my problem with a full software restoration -- that is, iOS software restoration.
I clicked on "Restore iPhone..." which does a complete reinstall of the iOS but also all apps, photos, songs, etc. Took about 45 minutes, but seems to have worked.
I had previously tried reverting to a backup of my iPhone, but that did not solve the problem. Only a full restore solved it.

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed. In that case, if there is a problem with comcast, the message send should just fail.
Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
You might find the comcast forums useful for getting the settings right - I found this:
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

My macbook screen doesn't work so I have connected it to the TV and now nothing works, I can't see the dock or the finder bar, no folders on desktop either. I don't know what to do!

Do you see anything on the TV?
If you just see your desktop, then your MacBook is defaulting to extended display mode. Try pressing the Command + F1 keys to see if you get the menu bar and other icons.
~Lyssa

I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

I've tried updating iTunes for Windows but it won't work. I removed iTunes and downloaded the new version (10.6.1.7) but it won't load. It says it cannot removed the older version of iTunes.

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

Should the opening of a case for the iphone 4s be big to allow more light in or it does not make a difference?

I got an otterbox case for the iphone 4. It is a universal case. The opening for the camera is small I was wondering if this would affect the quality of the pictures. Please advise.
Thank you!!

Try resetting the phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
Then, launch iTunes & connect your phone...what happens?

What's the best slim/lightweight case for iPhone 4

I really don't want to put a case on this great looking phone. But if I need to, I would like a case that shows most of the phone and protects the back and screen from scratches. Some that I'm considering, elago, stealth, powersuppot. Thanks!

I don't know why anyone would pay so much for a case and gets carried away about this 'best protection' thing. If you drop your phone, it doesn't matter what case you have, it's luck whether you damage your phone or not...in my humble opinion. I got mine from here http://stores.ebay.co.uk/Square-Box-AV?_rdc=1
This guy is based in the UK. Not sure if he'll send to US but 99p including delivery in UK. Think he's trying to get rid of stock which is why it's so cheap but I did buy one and I've got to say, it's the best fitting case I've ever had!!
Think he also is currently doing deals on screen protectors too!!

HT204291 Air Play was working now it is not gives me the An error occurred (-6722) while connecting to the AirPlay device "Family Room Apple TV"

Apple TV is working and set up. All I have done is take a vacation and one time I did hook up Macbook to a HDTV. Now I get home and this is the error I get.
An error occurred (-6722) while connecting to the AirPlay device “Family Room Apple TV”

Router is OK, I did check my security settings and I did turn on the firewall, while overseas, I turned it off and it works.

Error whil re-playing the coded ui test cases for internet explorer download window

Hi,
I have to create a test automation project which opens the IE and downloads file.
I have recorded all the steps to download the file to local folder.
My requirement is I need to download the file to a specific folder and compare those files.
When I tried to replay the recorded step I am getting error while changing the folder location.
I can change the file name dynamically but cant change the folder path as the click event of address bar fails.
I have recorded below steps
Click on Save drop down
Click on Save As
Pop up opens as shown
I can change the file name at run tims by passing the file name as parameter and it is accepting
but when I try to change the address it thorws error stating could not find the control with given search properties. I have to pass the folder path as parameter to the test case.
Please help me in resolving this error.
Thanks,
Meenakshi Nagpal
not able to add images to this post

Hi Meenakshi Nagpal,
>>When I tried to replay the recorded step I am getting error while changing the folder location.
According to your description, could you please tell me how you record these UI actions for coded UI test? Is it handing code or using coded UI test Builder?
Could you please tell me if you are recording these actions and then you change the folder location or you change the folder location by handing code after you finished these actions recording and then get the error?
About your issue, I tried to download file to a specific folder using coded UI test builder, I found that it can playback successfully.
If you are hand coding your coded UI test, I suggest that you can try to record these steps using Coded UI Test Builder. Then
generate the code and then try to playback check if you can download the file into the
specific folder.
In addition, about this error: could not find the control with given search properties. I doubt that the target control did not be found by the searchproperties.
So I suggest you can try to add more searchproperties for the target control check this issue again.
I suggest you can also use DrawHighlight Method to check if the correct control is found
before you perform actions on the target control.
I find a blog about how to troubleshooting Record and Playback issues in Coded UI Test, you can refer it.
http://blogs.msdn.com/b/tapas_sahoos_blog/archive/2011/11/07/troubleshooting-record-and-playback-issues-in-coded-ui-test.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have no problem connecting my i-phone programs to my tv through apple tv. but one program from an application from appstore don't go through apple tv. It says an error occured while loading the content.This is just for one program. All other works good.

My apple TV works fine with my I-Phone 4s. But one program from one of the application I downloaded from the app store dont work. When I load that a message comes "an error occured while loading this program" This is only for one program all other most of the time works good. Any one knows why ?

Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden

After upgrading the new operating system, it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select

After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?

Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
As expected, cdm-git also works fine since DMs only work in the root mode as of now.
Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
Last edited by looki (2014-08-23 13:04:49)

Even though my wi-fi is up and available my mac seems to take it off the list after being idle for a while and does not auto re log on no matter how many times i enter it in preferences

Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
HELP this is so…so… anoying .

Every time my Mac has been idle for a while and i go to mail or safari they fail as the network has been deselected even though it is on .My Touch never has a problem just my iMac I put the details back in and apply them and lock it , if i stay on for hours and hours no problem but if i leave for a while when i get back the network is not selected in the list … it is there just not ticked … the lock is still on and an ADMIN password required to change it is ticked .
HELP this is so…so… anoying .

Should i get the sleeve or the case for my macbook air 13 inch. I work under air conditioned room most of the time. I also store my macbook air in an air conditioned room 24/7.

Similar Messages

Maybe you are looking for