Should I Go For SM module

Dear Friends,
I m working in SAP SD Module, is it wisable to go for SM.
what are the knowledge i should have before going to do the course or start practice it.
Please guide me
Regards
Arun

Hi
Are you talkng about Service Management or Solution Manager.
SD and Solution Manager are different all together
it also depends what you want to become a functional or technical in this new area
there is plenty of documents on solution manager on SMP and SDN
https://websmp103.sap-ag.de/solutionmanager
also check the roadmap based upon the role you choose
Hope it helps
regards
Prakhar

Similar Messages

  • Which model of memory upgrade should I get for my MacBook Pro early 2011 model? I now have 2 - 2GB modules.

    Which model of memory upgrade should I get for my MacBook Pro early 2011 model? I now have 2 - 2GB modules.

    Installing RAM in a 2011-2012 MacBook Pro
    There is really only one way to install RAM into a 2011-2012 MacBook Pro and while there are hundreds of DIY videos online, I just like this one, found on YouTube, by “macmixing”.
    Note that there is a difference in the RAM that should be used in 2011 and 2012 models.
    2011 models must use:
    •204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    And 2012 models must use:
    •204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM
    So here's the video:
    Remember that the 13", 15" and 17" 2011 models (early or late) and the 13" and 15" mid-2012 non-Retina models can handle 4GB, 8GB or (unofficially, but, believe me, it works) 16GB of RAM. There are, in my opinion, only two 100% Mac-compatible vendors out there: Crucial and OWC. I really can't recommend any other brands, even though it may work, as these are the only brands that I've personally used in quite a while. Also remember to stay away from any RAM that is a “value” brand - Macs are picky about RAM and often these value RAM modules just don’t work very well.
    Good luck,
    Clinton

  • What should i know about MM module for a BW interview any docs?

    what should i know about MM module for my BW interview any docs?
    SDN experts are very helpfull to me. i will assign points. Thank you.

    Hi,
    If this is inventory management that you want to handle, you can use infocube 0IC_C03.
    Here a HowToguide:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328</a>
    Jacques

  • Which kernel module should I use for Marvell Yukon 88E8001?

    Which kernel module should I use for Marvell Yukon 88E8001?
    a. sky2
    b. skge
    c. sk98lin

    I found this in the kernel''s /driver/net/Kconfig:
    config SKGE
    tristate "New SysKonnect GigaEthernet support"
    depends on PCI
    select CRC32
    ---help---
    This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
    and related Gigabit Ethernet adapters. It is a new smaller driver
    with better performance and more complete ethtool support.
    It does not support the link failover and network management
    features that "portable" vendor supplied sk98lin driver does.
    This driver supports adapters based on the original Yukon chipset:
    Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
    Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
    It does not support the newer Yukon2 chipset: a separate driver,
    sky2, is provided for Yukon2-based adapters.
    To compile this driver as a module, choose M here: the module
    will be called skge. This is recommended.
    Looks like your module is "skge"

  • Which hard-drive modules should I load for the mkinitcpio.conf file?

    Hey all, I've always been confused by all the weird module names in the image files, anyway, here goes, since I have a laptop, I won't be upgrading my harddrive to a new interface. but.. that's not the problem, the problem is I don't know which modules I need to load for my hard-drive, here are some outputs from lspci, hdparm etc. Any help is appreciated!
    lspci
    00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller (prog-if 8a [Master SecP PriP])
    Subsystem: Hewlett-Packard Company Unknown device 30ae
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    I/O ports at 01f0 [size=8]
    I/O ports at 03f4 [size=1]
    I/O ports at 0170 [size=8]
    I/O ports at 0374 [size=1]
    I/O ports at 8410 [size=16]
    Capabilities: <access denied>
    hdparm
    [bolu@presario ~]$ sudo hdparm -I /dev/sda
    /dev/sda:
    ATA device, with non-removable media
    Model Number: ST980829A
    Serial Number: 5PK1LAHQ
    Firmware Revision: 3.05
    Standards:
    Used: ATA/ATAPI-6 T13 1410D revision 2
    Supported: 6 5 4
    Configuration:
    Logical max current
    cylinders 16383 16383
    heads 16 16
    sectors/track 63 63
    CHS current addressable sectors: 16514064
    LBA user addressable sectors: 156301488
    device size with M = 1024*1024: 76319 MBytes
    device size with M = 1000*1000: 80026 MBytes (80 GB)
    Capabilities:
    LBA, IORDY(can be disabled)
    Standby timer values: spec'd by Standard, no device specific minimum
    R/W multiple sector transfer: Max = 16 Current = 16
    Advanced power management level: unknown setting (0x8080)
    Recommended acoustic management value: 254, current value: 0
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=240ns IORDY flow control=120ns
    Commands/features:
    Enabled Supported:
    * SMART feature set
    Security Mode feature set
    * Power Management feature set
    * Write cache
    * Look-ahead
    * WRITE_BUFFER command
    * READ_BUFFER command
    * DOWNLOAD_MICROCODE
    * Advanced Power Management feature set
    * Device Configuration Overlay feature set
    * Mandatory FLUSH_CACHE
    * SMART error logging
    * SMART self-test
    * IDLE_IMMEDIATE with UNLOAD
    * SMART Command Transport (SCT) feature set
    Security:
    Master password revision code = 65534
    supported
    not enabled
    not locked
    frozen
    not expired: security count
    not supported: enhanced erase
    HW reset results:
    CBLID- above Vih
    Device num = 0 determined by CSEL
    Checksum: correct

    Do you have any problem with your current mkinitcpio setup, or why do you ask this?
    If it works with the defaults, it's probably a good idea not to mess with it.
    Okay, that's that and now for the adventerous part...
    Here's a minimal setup that works for me:
    MODULES="pata_hpt37x sd_mod jfs"
    HOOKS="base udev"
    You'd probably need to use pata_atiixp instead of pata_hpt37y, and whatever filesystem you use for / instead of jfs. In case you use encryption, lvm etc., take care to include the necessary hooks.

  • How to log input parameters for Function Modules?

    Hi,
    I need to create a Logging system to trace input parameters for function modules.
    The log functionality could be done by developing a class method or a function module (For example 'write_log'), and calling it within each function module that I want to log. The 'write_log' code should be independent from the interface of the Function Module that I want to log.
    For example, I'd like to write a function/class method that can log both these functions modules:
    Function DummyA
       Input parameters: A1 type char10, A2 type char10.
    Function DummyB
       Input parameters: B1 type char20, B2 type char20, B3 type char20, B4 type Z_MYSTRUCTURE
    Now the questions...
    - Is there a "standard SAP" function that provide this functionality?
    - If not, is there a system variable in which I can access runtime all parameters name, type and value for a particular function module?
    - If not, how can I loop at Input parameters in a way that is independent from the function module interface?
    Thank you in advance for helping!

    check this sample code. here i am capturing only parameters (import) values. you can extend this to capture tables, changin, etc.
    FUNCTION y_test_fm.
    *"*"Local Interface:
    *"  IMPORTING
    *"     REFERENCE(PARAM1) TYPE  CHAR10
    *"     REFERENCE(PARAM2) TYPE  CHAR10
    *"     REFERENCE(PARAM3) TYPE  CHAR10
      DATA: ep TYPE STANDARD TABLE OF rsexp ,
            ip TYPE STANDARD TABLE OF rsimp ,
            tp TYPE STANDARD TABLE OF rstbl ,
            el TYPE STANDARD TABLE OF rsexc ,
            vals TYPE tihttpnvp ,
            wa_vals TYPE ihttpnvp ,
            wa_ip TYPE rsimp .
      FIELD-SYMBOLS: <temp> TYPE ANY .
      CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
        EXPORTING
          funcname                 = 'Y_TEST_FM'
    *   INACTIVE_VERSION         = ' '
    *   WITH_ENHANCEMENTS        = 'X'
    *   IGNORE_SWITCHES          = ' '
    * IMPORTING
    *   GLOBAL_FLAG              =
    *   REMOTE_CALL              =
    *   UPDATE_TASK              =
    *   EXCEPTION_CLASSES        =
        TABLES
          exception_list           = el
          export_parameter         = ep
          import_parameter         = ip
    *   CHANGING_PARAMETER       =
          tables_parameter         = tp
    *   P_DOCU                   =
    *   ENHA_EXP_PARAMETER       =
    *   ENHA_IMP_PARAMETER       =
    *   ENHA_CHA_PARAMETER       =
    *   ENHA_TBL_PARAMETER       =
    *   ENHA_DOCU                =
       EXCEPTIONS
         error_message            = 1
         function_not_found       = 2
         invalid_name             = 3
         OTHERS                   = 4
      IF sy-subrc = 0.
        LOOP AT ip INTO wa_ip .
          MOVE: wa_ip-parameter TO wa_vals-name .
          ASSIGN (wa_vals-name) TO <temp> .
          IF <temp> IS ASSIGNED .
            wa_vals-value = <temp> .
          ENDIF .
          APPEND wa_vals TO vals .
        ENDLOOP .
      ENDIF.
    ENDFUNCTION.

  • Best practice for function module development

    When designing a function module, what is the best practice. Should we develop it so that most of the extraction is done within the function module, or should we develop it such that prior to calling the function module the extraction should be done in the main calling program and the function module would have a huge interface of many importing parameters?
    For e.g. lets say for some business logic I need MATNR MTART MEINS BSTME and so on. Now by knowing the matnr I can get all the other fields. Should I create a function module with just matnr as importing parameter and do the Select on MARA in the FM or should I create the function module with all the fields as required importing parameters. What would be a best practise in such a scenario.
    Thank you.

    Now we are getting into the ecapsulation part of function groups.  Did you know that when you run your program, and it executes a FM, that ALL function modules in the function group are loaded into memory?  And that global data inside the function group can be shared across functino module calls?  This is how you would relieve your concern.  Lets say that all of your function modules belong to the same group,  And all of them need to use a record from MARA, and you don't want to do a SELECT in all of these functions.  Basically, you just create a global structure variable in the TOP include of the function group.  In the first FM, you simply do the select and put that data into the global variable, then during the next FM call(the FM must be in the same group) you can get the data from the global variable directly without having to go to the database.
    Regards,
    Rich Heilman

  • Formal error: Invalid calling sequence for function modules

    Hi All,
    I have developed a function module for FQEVENT 620 Payment: Transfer Line Items for Clearing.
    The clearing works fine.
    After clearing the open items i need to post an FI-CA Document(BAPI : BAPI_CTRACDOCUMENT_CREATE) for each open item(cleared item)
    I have used the bapi : BAPI_CTRACDOCUMENT_CREATE in the same function module that i have developed for FQEVENT 620 Payment: Transfer Line Items for Clearing.Here i am getting an error "Formal error: Invalid calling sequence for function modules".
    So please let me know where i can use this bapi to post fi-ca document.Is there a BAdi or Enhancement Spot where i can use this BAPI or tell me what should i do to overcome this error.
    Regards
    Venkat

    Venkat:
    While I am confused about your business process - creating an open item when clearing one seems strange.  Look into event 0020 which is called after documents are posted - it may present the opportunity to post process additional documents.
    regards,
    bill.

  • Help regarding attaching smartform to a report program for QM module

    Hii,
    I have developed a certifiacate of analysis smartform for QM module and i attached it to a output type ...but i need to attach this smartform to a standard report RQCAAP01. can anyone help me what customizations i should do in report program in order to attach smartform.
    Regards,
    Venkat Akella.

    I attached smartform in NACE to LQCB output type but i should also make changes in report program RQCAAP01..can u please let me know what customizations i should do in tht report program to attach the smartform..

  • User exits for FI module in ECC 5.0 Version

    Hello,
    Can someone help me on this..i need to find a userexit in ECC 5.0 and this is in FI module(please provide me the steps to find as well). I need to do some validations and the exit should trigger at the end of document creation and just before the user clicks save button..Its urgent so i would appreciate a quick reply from anyone who knows about this.
    Thanks,
    Mohsin

    Hi Mohsin,
    Welcome to SDN.
    You can create new custom program in your ECC 5.0 (Developmen Instance) by cut and paste the following sample program. This program will allow you to find user exist based on transaction code i.e FB50.
    REPORT z_find_userexit NO STANDARD PAGE HEADING.
    *&  Enter the transaction code that you want to search through in order
    *&  to find which Standard SAP User Exits exists.
    *& Tables
    TABLES : tstc,     "SAP Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    * Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    * Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
    * Find SAP Modifactions
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    * Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    Hope this will help.
    Regards,
    Ferry Lianto

  • What should be needed for cost reports to be activated in Business Content?

    Hi experts,
      I am completely new to Business Content so sorry if I ask a silly question. Currently we are trying to migrate custom fixed queries to queries from Cubes in Business Content, because the company has growed in the past years.
      Our first stage is to have the new queries that report costs for the company.
    The reports should consider manufacturing costs such as
    - maintenance
    - outsourced special services (providers)
    - new machinery
    (not energy or service costs)
    This reports should include country, plant, date, amount, etc.
    I have been searching for the modules or cubes that should be activated for this requirement.  So far i found that in MM there is a cube 0SRV_C01 that includes external services.
    The data from the InfoCube External Services enables you to carry out analyses of services. Using this data, you can obtain answers to questions such as the following: "How much of each service was ordered from a certain vendor?" "What was the order value per service for a certain plant?"
    However there should be another information where manufacturing costs could be exploited.
    ¿Can anyone give me some advice on how to resolve this requirement? ¿ does anyobody know which cube(s) include the information I am looking for?
    Thanks,
    help wil

    Hi David,
              Check here...........
    BI Content
    http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
    SCM BI Content
    http://help.sap.com/saphelp_nw70/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
    Procurement
    http://help.sap.com/saphelp_nw70/helpdata/en/e9/62073c44564d59e10000000a114084/content.htm
    Invntory
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
    Regrads,
    Vijay.

  • Program should execute both for F8 and F9

    Hi All,
    I have a requirement that my program should execute both for F8 and F9.
    I have developed it as a report as the selection-screen contains 'Select-Options' and they want the Multiple Selection Button.
    I know that if I develop it as a Module pool, my problem is very easily solved.
    But since they want the Multiple-Selection button for Select-options which we cannot provide in a Module-Pool I am forced to develop a report.
    Please let me know if its possible to execute the program with both F8 and F9 function keys, while F8 can be the normal execute button, there is no need of any button for F9, that is a F9 key press is enough. The Report should execute if the user presses F8 or F9 key on the Key-board.
    Hope I am clear.
    Please help me with your suggestions.
    Thanks in Advance.
    Edited by: Dagny on Apr 1, 2009 6:57 AM

    Hi, Dangy
    I dont think you can do with f9 fkey,
    but you can do with ctrl+f9 , if ur client like this..
    this are some available FKeys.
    Freely assigned function keys
    F5
    F6
    F7
    F8                             ONLI       Execute
    Shift-F1                       DOCU       Program Documenta...
    Shift-F6                       SCRH       Selection Screen ...
    Shift-F7                       ALLS       All Selections
    Shift-F8                       FEWS       Chosen Selections
    Shift-F9
    Shift-Ctrl-0
    Shift-F11
    Shift-F12
    Ctrl-F1                        FC01       <SSCRFIELDS-FUNC...>
    Ctrl-F2                        FC02       <SSCRFIELDS-FUNC...>
    Ctrl-F3                        FC03       <SSCRFIELDS-FUNC...>
    Ctrl-F4                        FC04       <SSCRFIELDS-FUNC...>
    Ctrl-F5                        FC05       <SSCRFIELDS-FUNC...>
    Ctrl-F6                        LVUV       User Variables...
    Ctrl-F7
    Ctrl-F8
    Ctrl-F9
    Ctrl-F10
    Ctrl-F11
    Ctrl-F12
    Ctrl-Shift-F1
    Ctrl-Shift-F2
    Ctrl-Shift-F3
    Ctrl-Shift-F4
    Ctrl-Shift-F5
    Ctrl-Shift-F6
    Ctrl-Shift-F7
    Ctrl-Shift-F8
    Ctrl-Shift-F9
    Ctrl-Shift-F10
    Ctrl-Shift-F11
    Ctrl-Shift-F12
    Just execute ur program, and go to system>status->in SAP data , there is GUI status-> dbl clik in ur gui status and assign Fcode for ctrl+f9 and handle the same in user command.
    I hope it will solve ur problem.

  • I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

    I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

    Unplug your iBook from the AC power, shut it down and take the main battery out for about fifteen minutes. Then you can put the battery back in, plug the power back in and restart. This should reset the USB and FireWire ports.
    If that doesn't help, you could reset the Power Management Unit. Follow the instructions in Knowledge Base Article #14449 for resetting your PMU.
    You probably should also startup from your Mac OS X install disk and run the Disk Utility to "repair disk" on your hard drive. This will determine if you've got some kind of file directory/software problems with the files on your hard drive.
    I'm not much at decoding kernel panic logs, but this line jumps out:
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.filesystems.udf(1.4.1)@0x28a79000
    Did you have a DVD movie in the drive at the time? DVD movie disks are UDF format, but not much else is.
    -Doug

  • Custom Bootstrap accordion for FAQ module

    Hi I am trying to set up a  Custom Twitter Bootstrap javascript accordion for FAQ module.
    Nearly there, yet only one of the faqs works in that you click on the question and the answer opens, clicking on any other question opens up the same question
    I've customed Faq list layout with this code:
    <div class="panel panel-default">
    <div class="panel-heading">
    <h4 class="panel-title">
    <a class="accordion-toggle" data-toggle="collapse" data-parent="#accordion" href="#1">
    {tag_question_nolink}                  </a>
    </h4>
    </div>
    <div id="1" class="panel-collapse collapse">
    <div class="panel-body">
    {tag_answer}
    </div>
    </div>
    </div>
    I presume I need to amend the code where it has number 1 as only working for one faq but not sure how?
    Any help GREATLY appreciated.

    Hi thanks for replying, yes definately agree there should be no short cuts, I've had a good read through the docs, tried may things but all in vain so just stuck with coding as normal without the BC FAQ integration, It is obvious the problem is the requirement for each collapse question and answer to have their own assigned unique ID's, yet I cannot seem to work out how to dynamically create a unique ID for each via the FAQ Module Template (list Layout), thats why only one of them worked with my code.
    Anyway this works without the FAQ module integration but defeats the object really: http://aon-lafarge.businesscatalyst.com/FAQs.html
    I'm frustrated as I managed to set up a custom FAQ accordion for a different site using jQuery UI Accordion control integrating with the FAQ module,but this did not require unique ids to work, please see:
    http://www.royalmintmuseum.org.uk/about-us/faqs/index.html
    I was hoping to do the same with the Bootstrap collapse/accordian,but defeated this time,  I will however keep trying...

  • Need  guidance for make module generic?

    Hello Folks,
                      i have developed one module in ui5.Now i want to make it generic?how should i approach for same?
    Thanks,
    Ripu

    Hi,
    After completing training and (try to) have sound knowledge in dual module say SD & MM, will this help in my career as still I will not have any Implementation done?
    Regards,
    Vikas
    Edited by: Vikas.Sehra on Oct 6, 2009 6:05 PM

Maybe you are looking for