Should I load updates in sequence if there are more than one...

I have WRT54GS (no version #), should I add driver updates in sequentially ? I also have WAP51AB Dual Band Access Point (no version #), and BEFSR41 (no version #) but printed User Guide states on cover
to install BEFSR41 Ver. 2.

Rather than "driver" updates, I assume you mean firmware updates.
You do not need to install them in order. Each firmware update is complete. Only the latest firmware upgrade needs to be installed.
However, please note that you should only install the firmware posted for your model number and version number. For example, if your WRT54GS is (hardware) version 4, install the firmware for version 4, NOT the firmware for version 6.
If the router WRT54GS does not have a version number on it, call Linksys and they will look up the router serial number and tell you which version you have.
Message Edited by toomanydonuts on 12-16-200601:15 AM

Similar Messages

Importing From Excel file will not import assignments correctly where there are more than one assignment per task

I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew Payze

Andrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John

ITune Album Artwork issue - There are more than one for a song

Hi,
I've done this before....having a couple of artwork for one song. It was back when I used iTune 3 or so. Now that I'm using iTune 7. I can't seem to find a way to add more than one artwork to a song. I tried the iTune's help, which says I can just drag another artwork into the song's artwork box. But, that would replace the artwork I had earlier.
Anyone knows a way to add more than one artwork to a song? I'm using 10.4.9 if that helps.
Thanks,
DFguy.

Hi guys,
Thanks for the advice. I tried both in file info and the artwork box (while playing the file) and they both work. I sware to god that they both did NOT work before. That's why I had to post this stupid questions. I don't know why it didn't work before. Maybe because I selected the artwork that's already there? Anyway, now that this issue is solved, I'm very happy!
Thanks again,
DFguy.

Joining 2 related records using PL SQL in Apex - Problems when there are more than 2 related records?

Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
     cursor c_mar_principle(b_entry in number, b_book in varchar2)
     is
          select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
          from   MARRIAGES mar
          where mar.entry   = b_entry
          and    mar.book = b_book
          order by principle desc, id asc;
     rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM   := rec.surname;
:P16_FORNAME_GROOM   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE   := rec.surname;
:P16_FORNAME_BRIDE   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;

rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed.

AE 12.1 Crash: "There was more than one edit in the video track"

Here's the last log message: Last log message was: <140735209366288> <ImporterQuicktime::NativeReaderGetInfo> <5> There were more than one edit in the video track, defer to non-native quicktime for 0x1308a73a8.
iMac 27-inch, Late 2012
Software OS X 10.9
Graphics: NVIDIA GeForce GTX 680MX 2048 MB
Memory 24 GB 1600 MHz DDR3
Processor 3.4 GHz Intel Core i7
Areca 8050 RAID6 config (Thunderbolt)
AE 12.1 (Crash initially occured in previous version, which I don't know what it was - AE CC, but I don't know exact number - problably whatever the most recent update was)
My project has a bunch of ProRes files referenced... even when I move them, and After Effects marks them as offline, I just get this: Last log message was: <140735209366288> <ae.blitpipe> <2> Making New Context.
I have done some searching, and even if I go to Google, and put the search in quotes, I get nothing. It doesn't sound like anyone else has had just this problem.
Help?

Sounds like the ProRes files are encoded oddly in a format that AE's own handler can't understand and while falling back to QT it crashes. I believe there are some known issues with this for ProRes 444, but then again I'm not a Mac guy...
Mylenium

Hey is the new update going to let people facetime more than one person like 3-way? you'd think apple would have done this by now

hey is the new update going to let people facetime more than one person like 3-way? you'd think apple would have done this by now

If there is we will not learn about until the update is released. Speculation about such is not permitted in the forums.

Page HTML Body Attribute - can there be more than one in this area?

In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
//start citation
In the Page HTML Body Attribute, enter the following:
onload="disFormItems(); first_field();"
//stop citation
My questions are:
Can there be more than one "onload" statement?
If yes, how do you string them together?
Assume the second function I want to add is "disFormItems_local()"
Thank you,
Maggie

Okay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials.

Can there be more than one initiator in a shared review?

We use Acrobat X Pro to do shared reviews of pdf documents. At times, the initiator will be out of the office when someone needs to take action on the document and it would make it more convenient if there was more than one person with access. Is it possible to assign two people as the "initiator" of the documents so that there will always be one available?

No, sorry.
If you're using email or own-server-hosted reviews there's nothing (technically) to stop another person signing on using the initiator's identity provided they know the password. If you're using Acrobat.com to host the reviews, and so the participants are using Adobe IDs, then in a legal sense you can't because the terms of use for an AdobeID do not allow shared access.

Can there be more than one JVM Running on the same machine

Can there be more than one JVM Running on the same machine.

Even JVM's of different versions (or vendors) can run on the same box at the same time.

There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent

There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent

i have informed the police but they said the device could
be tracked if it turn on by its depend on serial numbers
Re: There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent

Airport disconnects when there's more than one device

I've got a really weird problem.. I have an Apple Airport Extreme 802.11n 3rd Generation. Software version 7.6 When more than one device connecrts to the base station it will disconnect everyone and then all devices will go into a connect/disconnect loops. Rapidly. This occurs only with wireless device. I watched the radar on my iPhone (5.1), Macbook running Snow Leopard, Macbook Air running Lion, and iPad 2 (5.1) blinking on and off, on and off. The only way to resolve this is to just have ONE person connect at a time.
Things I've tried:
1) Updating all software on all devices
2) Updating Airport firmware
3) Reboot and then restoring factory settings on the Airport when the reboot didn't work
4) Turning off encryption (WP2)
5) Making sure there are enough IP's for all the devices, turning off robustness, making sure the router is visible.
Because I know someone will ask this: The Airport sits atop a credenza in the open air. Nothing on, around, or above it. It's been in this position for months with no problem. It's not overly warm to the touch and I even used compressed air to blow out the vents (just in case) when this problem began.
I read once upon a time that the router gets a cache built up and that can cause these types of issues, but I have no idea how to delete said cache or even if it exists. It's just odd this only happens when more than one wireless device tried to connect to the network.
Thoughts?

I've resolved this! For some odd reason Apple won't let me denote this so I'm adding this reply. Turns out the problem was POWER related. The Airport was plugged into a power strip with several other devices. I unplugged all of those leaving just the Airport and the problem has not returned. If I add on all the devices, regardless of the power strip used, the problem returns. So it appears the Airport was just not getting enough power.
I've got it on a UPS now and the problem has not returned.

Update gives "single-row subquery returns more than one row"

Hi,
I have to update a table by getting values from two other tables. While doing that the inner query returns more than one value. I am not sure how to implement the logic without returning more than one row in sub quesry. Need help on that.
My query:
update buf_office_str o
set o.manager_ident =
(select sp.ident
from se2_r_src_sourceperson sp ,
(select distinct director_name, team_name from buf_sales_dump )t
where SP.SRCNAME = upper(substr(t.director_name,instr(t.director_name,' ')+1,length(t.director_name))||', '||substr(t.director_name,1,instr(t.director_name,' ')-1 ) )
and o.office_descr = t.team_name
Basically the query gets teh manager id from sp table where sp.srcname = t.team-name.
The office descr should be equal to the team_name.
This is the logic I am working towards:
For each office, i get the office_descr and get corresponding team_name. Match the team's director_name (from table t) with the sp.name and return the employee's id (sp.ident) for that office_descr.
I need to update all 50 offices with corresponding managerid for that office in buf_office_str table.
Is it possible to get done in one update? Pls let me know.

Hi,
"Single-row subquery returns more than one row" is one of those error messages that actually means what it says: the correlated sub-query in your SET clause is sometimes returning 2 or more rows .
The solution could be as simple as making the sub-query SELECT DISTINCT , as its in-line view, t, already is.
It's possible you have bad data, or a mistake in your statement.
To find the problem cases, you can run something like this:
WITH sub_q     AS
                   SELECT -- DISTINCT ?
                            sp.ident
                   ,         t.team_name
                   ,         COUNT (*) OVER (PARTITION BY t.team_name)     AS cnt
                   FROM    se2_r_src_sourceperson     sp
                   ,         ( SELECT DISTINCT director_name
                               ,                  team_name
                           FROM            buf_sales_dump
                         )                    t
                   WHERE   sp.srcname     = UPPER ( SUBSTR ( t.director_name
                                                     , INSTR ( t.director_name
                                              ) + 1
                                            , LENGTH (t.director_name)
                                      || ', '
                                      || SUBSTR ( t.director_name
                                                      , 1
                                               , INSTR ( t.director_name
                                                    ) - 1
SELECT     o.*     -- or whatever helps you
,     sq.*
FROM     buf_office_str     o
JOIN     sub_q          sq     ON     o.office_descr = sq.team_name
WHERE     sq.cnt          > 1
;If you'd like more help, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables as they exist before the UPDATE, and the results you want from that data (that is, the contents of buf_office_str after the UPDATE). Make sure the problem occurs with the sample data you post.

Can there be more than one datasource to an Infosource

Hi,
I am learning the SAP BW and this question could be very basic.
I know that there can be only one infosource assigned to a datasource for each source system, but can an infosource have more than one datasource from different source systems?

Yes, you can have multiple datasource assignments that belong to the same source system or different systems.
DATASOURCE can only have 1 INFOSOURCE
INFOSOURCE can have many DATASOURCES
Good luck!

Can there be more than one port for the same logical system

Can we have more than one TRFC port for tranferring data from one logical system to another?
The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

Hi Shital,
I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
Advantage: Your task would run, no performance problem (http: very good, asynchron)
Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
Regards,
Udo

Can there be more than one transport targets for a business system in sld

Hi All,
I have a question about transport targets in sld for sap xi 3.0 sp19.
We have a requirement where a business system needs to have two transport targets.In SLD i see that only one transport target can be assigned. Is there any way to assign more than one transport target to a business system?
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
I am not sure if a business system can have more than one transport target .If yes , what is the way to add more than one ?
Please help .
Thanks,
Padmaja

Hello,
I know that there can be more than one source for a business system where more than one different business systems have the same business system as the target.
As far as I know, you would have to change the target everytime you will transport it to a different target e.g 3 target systems = 3 times you change the transport target in SLD.
Regards,
Mark

Should I load updates in sequence if there are more than one...

Similar Messages

Maybe you are looking for