Should i open folder and transfer cd file to n200 or whole fold

I used mediasource to rip my cds to computer and ended up in widows explorer with a folder for the cd and inside the folder a file with cd in it.when i ripped using windows media i ended up with just a file with cd in it in explorer. In transfering cds using drag and drop from explorer does it make more sense to open folder first and drag file to player to copy?Will this make playback easier on the n200?

Basically it's up to you. Folders offer some advantage in terms of organisation, and if the player is formatted as FAT you can only have about 30 files and folders in the root of the player's dri've.

Similar Messages

Upgrading to SSD, what is the best way to clean install and transfer my files over?

I am upgrading to an SSD and I would like to start clean by doing a fresh installation of Yosemite on the new drive. However, I still want all of my personal files from my current hard drive, like my music, music libraries, photos, and Home folder, transferred over to the new drive. What is the best way of doing this?
I have Time Machine and a Time Capsule. Could I simply restore a Time Machine backup, or will that defeat the purpose of doing a clean install?
Should I just back up the home folder and transfer the home folder onto an external drive, then drag the home folder to my new drive? Will that save my iTunes playlists and music?
I don't need to transfer apps over so I'm not worried about that. Just my documents, files, pictures, music.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
      logo appears.
5. Wait for installer to finish loading.
Boot From a Recovery HD:
1. Restart the computer.
2. Immediately after the chime press and hold down the
      "COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.
After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard, Snow Leopard and later.)
For Lion or later select Disk Utility from the Utilities Main Menu.
After Disk Utility loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the Disk Utility status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If Disk Utility reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD on the external drive, then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the Utility Main Menu, then click on the Continue button.
2. After Disk Utility loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the Disk Utility main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition/Apply button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Select the destination volume from the left side list.
2. Click on the Restore tab in the DU main window.
3. Check the box labeled Erase destination.
4. Select the destination volume from the left side list and drag it to the
      Destination entry field.
5. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location?

I have files in my iTunes media folder that somehow are not in my library. How do I get iTunes to scan my media folder and add missing files to my library without making a copy of each file in the same location? If I use add file / folder to library, it scans the folder and then makes a copy of any file that is not in my library in the exact same location; I recal in older versions of iTunes being able to just drag my media folder into my library and it would update missing links.

Only the songs that are connected to iTunes will be copied when you consolidate to a new folder.
Splitting the media folder away from the usual location makes it harder to move iTunes in the future.
Are you go move everything back once you've tidied up or are you going to leave it that way? Either way I'd recommend you create an iTunes folder at the new location, an iTunes Media folder inside that, and consolidate to this new iTunes Media folder. You should also use the option File > LIbrary > Organize Library > Rearrange files in the folder "<Media Folder"> if you have not already done so.
tt2

OPEN DATASET and TRANSFER

Hi all,
I open Dataset in Text Mode with default encoding and trying to transfer data from an internal table to TEXT file in application server.
But my internal table has 1 numeric field, so while transfering i am getting error stating: "cannot write Non-chracter field".
So, is there any way to write Non-character fields also using same OPEN Dataset and TRANSFER Statements.
Help will be rewarded.
Sachin

Hi Saching..
As per UNICODE We cannot transfer Numeric fields to file .
So We must convert the Record to Character format.
This is the Modified code. Changes are in BOLD.
TABLES: ZSACHIN_STUDENT.
PARAMETERS:
OUTFILE(20) DEFAULT 'sachin_test.txt'
LOWER CASE.
TYPES: BEGIN OF st_student,
ID TYPE ZSACHIN_STUDENT-ID,
NAME TYPE ZSACHIN_STUDENT-NAME,
ADDRESS TYPE ZSACHIN_STUDENT-ADDRESS,
STATE TYPE ZSACHIN_STUDENT-STATE,
CITY TYPE ZSACHIN_STUDENT-CITY,
STATUS TYPE ZSACHIN_STUDENT-STATUS,
END OF st_student.
DATA : it_student TYPE STANDARD TABLE OF st_student,
it_student_wa TYPE st_student.
DATA: V_RECORD(200) TYPE C.
OPEN DATASET OUTFILE FOR OUTPUT IN TEXT MODE encoding default.
IF sy-subrc <> 0.
message e001(z_error).
endif.
SELECT * FROM ZSACHIN_STUDENT INTO
CORRESPONDING FIELDS OF TABLE it_student.
LOOP AT it_student INTO it_student_wa.
CONCATENATE IT_student_wa-name
 IT_student_wa-address
 IT_student_wa-state
 IT_student_wa-city
 IT_student_wa-status
 INTO V_RECORD
 SEPARATED BY CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
TRANSFER V_RECORD TO OUTFILE.
ENDLOOP.
CLOSE DATASET OUTFILE.
Here SEPARATED BY is for generating TAB delimiter .
Reward if Helpful

Why cant I open D90 and D70 NEF files in photoshop7?

Why cant I open D90 and D70 NEF files in photoshop7?

I suppose you are using Photoshop Elements 7 ?
If so, you may have a problem similar to the one in this thread :
http://forums.adobe.com/message/5565719#5565719

Some Virus Files that been created inside the Windows system file folder and System32 sytem file folder

I have here some copies of the files that I have retrieve inside the Windows folder and System32 system file folder. This files was created by a virus or some malware of some sort. Please take a closer look at thsi becasue this virus doesnt have a visible
events or something that you see at your screen to get you worried or to let you know that there is something bad happening on your system. I just cant get a copy of the virus file that is in a usb or a mass storage device of many students here in my internet
shop. And I'm worried even thou it does not do anything visible, I'm worried that it might made some security holes or privacy leaks that I can't seem to see it. Can't find the main program if it has one, because deleting the files seems to work but if my
computer plugs an infected usb device again the files comes back even thou the main virus file inside the usb device has been block and deleted by Avast, the files still is being created by some program of some sort inside the system, maybe it is already inside
the system or maybe not because the files will only be created if an infected usb device has been plug in even thou Avast has already detected the main .fat file inside the usb device still the files are created. I'm guessing this virus didn't penetrate the
system because full system scan came out clean twice. Boot time scan and start-up scan all users and all loaded to memory files also came out clean, but the files was already deleted before the scan so I don't know for sure of the result if these files were
scan. I just want to know why these files penetrated the Windows system folder even if my UAC is active, how come this virus has gain access to the system folder and bypassing the UAC, DEP and my Windows Defender. And also I'm gonna post in Avast forums about
this too.
My Unit:
OS: Windows 7 Ultimate SP1
MOBO: Gigabyte G41M COMBO
CPU: Pentium(R) Dual-Core E5800 @3.20ghz x2
RAM: 2.00gb
System Type: 32 Bit
http://www.mediafire.com/download/41lercy9xdzn3wq/Windows.rar

Not really relevant to DPM, I'd suggest you post over at
http://social.technet.microsoft.com/Forums/en-US/home?forum=w7itprosecurity

Make Record for folder and multi-selected files

Hi,
'Make Record' item disappeared in MENU for folders not for files.
And it can't make record for multi-selected files.
I can only make Record by one and one.
How to make Records for folder and multi-selected files?
Regards
Kitae

Programatically, only a single document at a time can be made a record :-
makeRecord
public Item makeRecord(long parentId,
long docId,
NamedValue[] attrs,
AttributeRequest[] attributes)
throws FdkException
You could potentially through a custom workflow triggered on UserRequest allow multiple submitted documents to be made records through a custom BPEL process calling Content DB Web Services.
Matt.

I plugged in my macbook pro power adapter and heard a loud bang. I checked the charger by opening it and found out the charger blew the whole mother board up. So i buy another charger, as i live in Egypt, that blew up the same way, please help.

I plugged in my macbook pro power adapter and heard a loud bang. I checked the charger by opening it and found out the charger blew the whole mother board up. So i buy another charger, as i live in Egypt, that blew up the same way, please help.

You'll certainly need a new logic board.
If I were you, I would take the machine into your local Apple Store or an AASP and have them evaluate the problems and give you an estimate for repair. If you're out of warranty, be prepared to pay a very high price to get your computer repaired.
Good luck,
Clinton

E Mac I cant see any videos in sites like Youtube. I have versions 10 in the application folder and Mac version 7.6 in the utilities folder. Any help would be MUCH appreciated. Thanks.

I can't see any videos in sites like Youtube. I have Quicktime Mac versions 10 in the application folder and Mac version 7.6 in the utilities folder. Any help would be MUCH appreciated. Thanks.

*** may have found a fix ? *** Thanks to your post re: GDI objects I checked task manager ( added column "GDI objects")and saw 700+ whereas working 6.18 was 160 ish Got thinking - what could possibly use that many GDI objects ( firefox only uses a few hundred and it's a platform ) Then it hit me - emoticons ! So in tools/ options/ IM&SMS/ IM Appearance unchecked "show emoticons"and also unchecked "show images and other media previews"restarted Skype and GDI objects now only 164 ( down from 729 )and all other windows are repainting fine and are usable again( my problem was RDP sessions that became unusable, as I work remotely ) To be sure, have rechecked the options and restarted skype and see 700+GDI objects ( goes up from 660 when place call to echo/sound test )and removed them again to get only 164have also rebooted a few times and gone through the whole processof unchecking emoticons, restart, rechecking emoticons, restart to make sure itsnot a fluke. pretty sure this has fixed it for me ( so I now have a working 7.6.0.105 on XP SP3 ),and as your problem "sounds" the same I hope it also works for you. Thanks again for the GDI hint

Open, save and transfer files in Java

I need to find methods that will enable me to open files using a string (i.e. fileOpen(C:\temp\theDocument.doc), save files in the same way and transfer (or copy) files between drives and directories.
The files may be of any type (.doc, .jpg, .gif, .pdf, etc).
Can anyone help me by giving example of code that will enable me to do this, I am new to Java.
Thanks,
Lindsay

Try http://java.sun.com/docs/books/tutorial/essential/io/index.html

Script/Automator Get Filenames in Folder and Move Each File into Folder based on Filename?

I have searched for an answer to this and I have searched through multiple file renaming apps on the app store too but alas I cannot find anything that does what I want so I ended up looking into Automator as my saviour but I am a total NOOB.
What I want to do is point automator to a folder of my choosing
Automator then takes each file in that folder and creates a folder with the same name as the file and then move the file into that subfolder.
Sounds easy enough eh
I'm totally stumped, anyone have any guidance ???

This is a PITA to do in automator - automator does not handle loops the way it should - but in applescript it looks like so (open this in the applescript editor, select the file you want to run it on in the Finder, then run the script):
tell application "Finder"
          set mainFolders to the selection
-- selection returns as a list, so even if there's only one folder a loop is used
          repeat with thisFolder in mainFolders
--get the folder's contents
                    set containedItems to every item of thisFolder
                    repeat with thisItem in containedItems
-- get name of file, add 'ƒ' to avoid name conflicts
                              set newFolderName to (displayed name of thisItem) & " ƒ"
--make folder, move item
                              set newFolder to make new folder at thisFolder with properties {name:newFolderName}
move thisItem to newFolder
                    end repeat
          end repeat
end tell

Missing all files of a folder and the pst file cannot be repaired

All files under folder Inbox\TechSupport suddenly are missing. The Folder Size window shows this folder has a size of 180719KB.
I used "C:\Program Files\Microsoft Office\Office15\SCANPST.EXE" to try to fix the post files a few times, the problems remains. No matter how many times I run SCANPST.EXT on this pst file, it always find the following error:
Internal errors were found in this file. They must be repaired for this file to work correctly.
Here is the log:
Microsoft (R) Inbox Repair Tool
© 2012 Microsoft Corporation. All rights reserved.
Version 15.0.4667.1000
**Beginning NDB recovery
**Attempting to open database
**Attempting to validate header
**Attempting to validate AMap
!!AMap page <@416752640> has csFree of 7, but should have 255
**Attempting to validate BBT
**Attempting to validate NBT
**Attempting to validate BBT refcounts
**Attempting to validate header NID high-water marks
**Beginning PST/OST recovery
**Attempting to recover all top-level objects
**Store created by build: 15.4667
**Attempting to walk all folders
**Attempting to locate any orphaned folders/messages
**Performing final HMP validation
**Attempting to check top-level objects for consistency
**Updating folder hierarchy
**Attempting to fix original file
**Attempting to copy back BBT
**Attempting to copy back NBT
Any tip to remedy this will be greatly appreciated.
Hong

Thanks for the update, Hong.
If we copy some emails to TechSupport folder, are those emails still visible in the TechSupportfolder?
Although it doesn't look like a view problem, we may also try to open Outlook with /cleanviews switch to seek our fortune. To do this, exit Outlook, press Windows key + R to open the Run command, type
outlook /cleanviews and press Enter. We may also try to search for the missing emails using Instant Search to see if there is any result.
In addition, we may also try to use the MFCMAPI tool to look into the TechSupport folder and check if we can see and open the missing emails. To do this, please follow the steps below:
1. Download MFCMAPI tool: http://mfcmapi.codeplex.com/
2. Exit Outlook and start MFCMAPI.exe.
3. Click Session > Logon, choose your profile and click
OK.
4. Double-click the PST file that has this issue from the list.
5. In the opened new window, expand Root Container > Top of Outlook data file > Inbox.
6. Find and right-click the TechSupport folder under Inbox, select Open contents table.
7. In the opened new window, check if you can see your emails in the upper portion of the window. If so, double-click an item to see if you can open the email in Outlook window.
Please let me know the result.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How do I make space on my MBP and transfer old files to External Hard Drive?

I recently ran out of the 250 GB space on my 2010 Macbook Pro, so I bought a non-apple external hard drive. I plugged it in and Time Machine automatically popped up.
I just wanted to know what the correct way to transfer all my old files that I'm not using any more and still want to keep to the external hard drive and not use the external hard drive as a "backup" for my laptop but rather as just a place to keep all the files I'm not currently using. Do I just use Time Machine and turn off the automatic back ups? Is there a certain way to transfer individual files to the EHD later (does this happen through Time Machine or just dragging them in through Finder?)?
I've never used an EHD so I'm really unsure on how all this works on a Mac since the instruction manual only gave instructions for PC's even though it is Mac compatible.
Thanks in advance!

Apple doesnt make hard drives, they use Toshiba/Hitachi inside current macbook pro non-retina.
You should always have a backup regardless, and 2 at that. One backup, and one archive, unless losing valuable data is no consideration to you.
use time machine as a backup for restoration /emergency backup and use a separate HD for archiving valuable data.
Using an external HD is as easy and falling down. Buy a nice Hitachi/Toshiba or Seagate external HD, format it in disk utility for MAC OSX extended journaled and drag and drop ALL your valuable data to same and updata as needed.
a nice 1TB external HD is currently running $65
backup with time machine,
ARCHIVE all valuable data, ,music, pics, files, videos etc etc onto ANOTHER hard drive.
2 backups is 1, and 1 is none.
If you always follow that rule that should be written in stone, you'll never be sorry.... (and I know countless 1000s that have been)

FCP Crash when opening log and transfer with some AVCHD footage on a card

Hi,
I'm using a freshly (re)installed version of FCP 7 on a brand new macbookpro loaded with 8gb ram and equipped with a small 2ghz Intel Core i7
I get footage shot on Panasonic ag-hmr10 minicams coming on SD cards as AVCHD footage. Sometimes the files are quite big, 17gb of compressed footage.
When I go to log and transfer, to convert the footage in apple prores, the l/t window opens, I see a preview of my footage, than the spinning beach ball of death shows up and FCP crashes every time. I've tried deleting the preferences and reinstalling the software. Still, it keeps crashing. Now the same file on a different computer equipped with FCP will be processed, slowly but surely.
Now I know I can work around this problem by going to toast as an encoder, but I want to fix this issue so I can operate from FCP. I've seen this problem posted before but never found any good solution.
Any suggestions?

Have you tried setting the L&T AVCHD audio conversion prefs to plain stereo?
Open the L&T window.
Click on the gear icon towards the upper center of the frame.
Select "Plain Stereo" For the AVCHD plugin.
MtD

Should i open folder and transfer cd file to n200 or whole fold

Similar Messages

Maybe you are looking for