Should I output to DLT using DDP 2.0 or 2.10 ?

This is a question for your replicator, rather than us here. Which can they handle best? I have sent DDP 2.0 and had problems, but replaced the tape with DDP 2.10 and it was fine. I was also asked to use CMF on one occasion - it all depends on what your bureau is happiest with, although I can't imagine they will struggle with any of the three options from DVDSP.

Similar Messages

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Will project archive out of elements 13 work in premiere pro cc or should I output to file? Thanks

Hi Phillip,
You should be able to open a Premiere Elements Project in Premiere Pro CC (Windows only), however, I tried it and found the results were not very acceptable for use as a backup. Can you try it first?
Thanks,
Kevin

1v-5v output linearly by using 5v supply, voltage divider and variable resister

How can i get 1v-5v output linearly by using 5v supply, voltage divider and variable resister ?
"SB02"
Solved!
Go to Solution.

Do you have it wired like the attached file? Using my schematic, you can calculate the current through the pot based on the desired voltage drop across the pot
4V / 10Kohm = 0.0004 A
From Kirchhoff's current law, we know the same current will flow through the circuit so now we can calculate the lower leg of the divider based on the current and the desired voltage drop across the resistor
1V / 0.0004 A = 2.5K Ohm
My schematic keeps the current through the circuit constant so the voltage divider should never change. Assuming a linear pot, you will get a linear voltage swing as measured at the wiper. If you wired the pot a different way, then more then likely, you are changing the total resistance from 5V to ground which would effect the current which would effect the voltages.
Attachments:
divider.JPG ‏48 KB

My Bluetooth USB wireless transmitter for my portable speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. Can anybody help?

My Bluetooth USB wireless transmitter for my portable BT speakers has quit working. Preferences says, "The selected device has no output controls", it used to work just fine. The internal and a pair of wired external speakers work fine. Can anybody help?

Just tested something and it worked.
If I put the headphones all the way in, the mac recognizes it as a digital output.
But if i don't put it all the way in, it recognizes it as headphones and works perfectly.
It's probably this crappy headphones.
If anyone has the same problem, try this out.

Should I be able to use a Lexmark Pro 205 wireless printer from my iPad 1? My iPad can't find the printer. Iveinstalled the Lexprint app on iPad and downloaded the Lexmark Listener on desktop computer. Still can't print from iPad.

Should I be able to use a Lexmark Pro 205 wireless 3 in 1 printer with iPad 1? I have installed the LexPrint app on iPad, downloaded the Lexmark Listener on desktop computer but still can't print from iPad. My iPad cannot find the printer. But I can print from desktop without USB cable. I upgraded the system on my iPad sometime ago. Suggestions??

Here is the list of AirPrint printers, and you particular printer is not on it. So that means you will need to use the Lexmark app, and print through your computer.
There is a Lexmark guy that hangs around these forums who may chime in with a response as well.
http://support.apple.com/kb/ht4356

Should my wife and I use the same Apple account or separate accounts?

Should my wife and I use the same account or our own accounts?
We each have our own iPhones and we share one iPad.
We have one computer where we use iTunes (our main desktop at home).
On iTunes on our computer, sometimes we are logged into my wife's iTunes account and sometimes we are logged into mine.
My iPhone was set up with my account and my wife’s was set up with her account.
My wife's iPad is set up with her account (but it seems like it is pretty easy to log out and then log in with my account if I want, I think).
Since we log into our respective accounts on iTunes and have our own accounts for our iOS devices, we purchase music, games, etc. on both accounts.
If we continue with our current method of different accounts, I am worried that our music, games etc. will be separated so that we won't be able to access them all from each of our devices. For example, I'm thinking of setting up that Home Sharing thing where you can use your iOS device to stream off your computer's iTunes but I think it only streams off the iTunes account you are currently signed into.
Is this a good idea or should we just pick one of our accounts and use it exclusively?
If we just use one account, should our phones both be signed in / started up with that one account?
Thanks for any info.

2 iphones, 1 ipad, 1 PC with 1 apple account

HT4436 Should my wife and I use the same apple id and icloud account? We have seperate iphones and share an ipad and our itunes are on 1 pc desktop??

Should my wife and I use the same apple id and icloud account? We have seperate iphones and share an ipad and our itunes are on 1 pc desktop??

2 iphones, 1 ipad, 1 PC with 1 apple account

Should I be able to use my Vision:M when it's docked/connected via U

I recently got a Vision:M, and when I was initially charging it using the included USB cable, it worked fine. Once I installed the software and transferred files,it stopped reacting to any key presses while connected to USB. It will receive files, but that's it (obviously, that's the main point of the USB connection - no complaints there).
My biggest concern is that while it is in this state, the image of the arrows around the USB icon in the middle of the screen stays on the whole time, but the arrows aren't moving as when a transfer is happening. The screen does dim, but I'm worried that over time, even if I only connect the device just long enough to charge it, that the image will become burned into the screen and ruin it. And I know there will be times I'll connect it to charge and forget about it for much longer, thus raising the risk of burn-in...or is burn-in not an issue with LCD?
At any rate, is this the expected behavior, or should I be able to use the VisionM when it's connected and/or should that image be visible when charging?
Thanks!

buring only happens with plasma not lcd. also thats weird.

XML Schema Collection (SQL Server 2012): Complex Schema Collection with Attribute - Should xs or xsd be used in the coding?

Hi all,
I just got a copy of the book "Pro SQL Server 2008 XML" written by Michael Coles (published by Apress) and try to learn the XML Schema Collection in my SQL Server 2012 Management Studio (SSMS2012). I studied Chapter 4 XML Collection of the book
and executed the following code of Listing 4-8 Complex Schema with Attribute:
-- Pro SQL Server 2008 XML by Michael Coles (Apress)
-- Listing04-08.sql Complex XML Schema with Attribute
-- shcColes04-08.sql saved in C:\\Documents\XML_SQL_Server2008_code_Coles_Apress
-- 6 April 2015 8:00 PM
CREATE XML SCHEMA COLLECTION dbo.ComplexTestSchemaCollection_attribute
AS
N'<?xml version="1.0"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="item">
<xs:complexType>
<xs:sequence>
<xs:element name="name" />
<xs:element name="color" />
<xs:group ref="id-price" />
<xs:group ref="size-group" />
</xs:sequence>
<xs:attribute name="id" />
<xs:attribute name="number" />
</xs:complexType>
</xs:element>
<xs:group name="id-price">
<xs:choice>
<xs:element name="list-price" />
<xs:element name="standard-cost" />
</xs:choice>
</xs:group>
<xs:group name="size-group">
<xs:sequence>
<xs:element name="size" />
<xs:element name="unit-of-measure" />
</xs:sequence>
</xs:group>
</xs:schema>';
GO
DECLARE @x XML (dbo.ComplexTestSchemaCollection_attribute);
SET @x = N'<?xml version="1.0"?>
<item id="749" number="BK-R93R-62">
<name>Road-150 Red, 62</name>
<color>Red</color>
<list-price>3578.27</list-price>
<size>62</size>
<unit-of-measure>CM</unit-of-measure>
</item>';
SELECT @x;
GO
DROP XML SCHEMA COLLECTION dbo.ComplexTestSchemaCollection_attribute;
It worked nicely. But, I just found out the coding that was downloaded from the website of Apress and I just executed was different from the coding of Listing 4-8 listed in the book: all the <xs: ....> and </xs: ..> in my SSMS2012 are
listed as <xsd:...> and </xsd:...> respectively in the book!!?? The same thing happens in the Listing 4-3 Simple XML Schema, Listing 4-5 XML Schema and Valid XML Document with Comple Type Definition, Listion 4-6 XML Schema and XML
Document Document with Complex Type Using <sequence> and <choice>, and Listing 4-7 Complex XML Schema and XML Document with Model Group Definition (I executed last week) too. I wonder: should xs or xsd be used in the XML
Schema Collection of SSMS2012? Please kindly help, clarify this matter and explain the diffirence of using xs and xsd for me.
Thanks in advance,
Scott Chang

Hi Scott,
Using xs or xsd depends on how you declare the namespace prefix.
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="item">
I've posted a very good link in your last question, just in case you might have missed it, please see the below link.
Understanding XML Namespaces
In an XML document we use a namespace prefix to qualify the local names of both elements and attributes . A prefix is really just an abbreviation for the namespace identifier (URI), which is typically quite long. The prefix is first mapped to a namespace
identifier through a namespace declaration. The syntax for a namespace declaration is:
xmlns:<prefix>='<namespace identifier>'
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

How to Download displayed output to Excel Using Bsp Application

Hi Experts,
please give me some idea because I am New In BSP.
How to Download displayed output to Excel Using Bsp Application.
If any sample code please do send me.
In my condition I am getting data in 2-3 table view formats on one page and i want download that in Excel.
please help me.
Regards & Thanks,
Yogesh

Hi,
This is more a question for the BSP forum.
Anyway, as such it's realy easy since you can use HTML in order to import to Excel. All you need to do is add
runtime->server->response->set_header_field( name = 'Contnet-Type'
value = 'application/vnd.ms-excel' ).
runtime->server->response->delete_header_field( name = 'Cache-Control' ).
runtime->server->response->delete_header_field( name = 'Expires' ).
runtime->server->response->delete_header_field( name = 'Pragma' ).
Also check threads like
Download BSP data into Excel
export bsp-table to excel
Export BSP Table to Excel
Eddy
PS. Reward useful answers and earn points yourself

Video output size to use for a (horizontal) Lower Third.

Hi. I would like to know what the video output size to use for a (horizontal) Lower Third. I will be very grateful for your help. Thanx in advance. Sam.

Make it the same horizontal & vertical size as your video. The upper 2/3 needs to be transparent.

HT201365 My iPad is locked and has this message "this iPad hasn't been backed up. Backups happen when this iPad is plugged in, locked, and connected to wi fi". What should I do to continue using it please?

My iPad is locked and has this message "this iPad hasn't been backed up. Backups happen when this iPad is plugged in, locked, and connected to wi fi". What should I do to continue using it please?

Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

How to program labview to output continous voltage using NI PCI-MIO-16XE-50

I am an undergraduate student working on a research project. I need to program a labview block diagram to output continous voltage using DAQ NI PCI-MIO-16XE-50. I am new to this and having problems with formulating.
For example, if i need to output 4V, how to output 4V from the DAQ.
I know that there are 2 channels for output. But having problems figuring out which pins to use as well.
If there are any examples,tutorials or whatever hints i could get in order to solve this, that would be great. I am simply confused and wondering where to start.
Thanks in advance.
Confused undergraduate student

Here is an example of how to do some basic analog and digital communication. Since you need a 4V signal you are going to want to use Analog Output.
http://decibel.ni.com/content/docs/DOC-15408
Product Support Engineer
National Instruments

Output type is used for sending / printing "schedule lines" against sch agr

hi
which output type is used for sending / printing "schedule lines" against sch agreement
LPET or LPH1?
sara

Hi Sara,
It is LPET.
Thanks & Regards,
Kiran

Output in Excel using BODS

Hi,
I am new to BODS.Is it possible to have an set of records as output in Excel using BODS. I really appreciate your quick response.
Thanks,
Kumar

Hi Kumar,
In the current version 3.2, BODS only accepts Excel as a source file. However, you can create CSV and other flat files that you can import into Excel, or you can import XML target files, or export to a database and create an Excel extract.
Using Excel as a target format is not supported.
Christian

Should I output to DLT using DDP 2.0 or 2.10 ?

Similar Messages

Maybe you are looking for