Should I plug time machine hd into cinema usb to backup?

I remember reading somewhere that one should only back up to a harddrive when it's plugged directly into the computer. Would anybody know if this is really necessary and if so what the reason is?
It's just that for convenient it would be much easier for me to keep the hd plugged into my Cinema Display so I don't have to keep plugging/unplugging all the time (and I could hide it away from prying eyes under my desk)
Many thanks for your advice
Nick

If the EHD is powered from the USB port I'd keep it connected to the computer's port to make sure it gets sufficient power at all times.  If the Cinema Display is self powered and it's ports are powered from it's power supply then it should be OK.
OT

Similar Messages

  • Should I use Time Machine?

    I have a new Western Digital My Passport Essential 320GB external hard drive. I also have an old PowerPC iBook G3, with a 40GB hard drive and a dead logic board. I can still access the iBook's HD by hooking it up to my current MacBook and starting it up in Target Disk mode. My current MacBook has a 120GB hard drive, which is getting full.
    This is the first time I've ever used external storage. What I would like to do is:
    a) copy the contents of the iBook's HD to the external HD;
    b) back up the contents of the MacBook's HD;
    c) free up some space on the MacBook's HD.
    My questions:
    1. Do I need to format the external drive before doing anything? If so, am I right in thinking that I should do this in Disk Utility > Erase, and choose 'Mac OS X Extended (Journaled)'?
    2. If I do this, do I need to worry about the files that were already on the drive when it arrived from the manufacturer? (I might keep the User Guide pdf, but everything else seems to be .exe files, or files for which there is no default application specified to open them.)
    3. Do I need to create a partition on the external HD for the contents of the old iBook HD?
    4. Will Time Machine work on a partitioned external HD?
    5. Should I use Time Machine to back up the contents of my MacBook, or do it manually? The things that I'm most concerned to back up are my photographs. However, these are also the files which take up the most room on my MacBook HD (I shoot in RAW - lots of 10MB+ files), so are the obvious candidates for files to keep on the external HD in order to free up space on the MacBook. If I back up using TM, then erase some photos from the MacBook hard drive, will TM then erase them from the external hard drive as well - either immediately or when the external hard drive fills up - or will they be safe forever? Sorry, I'm not entirely clear how TM actually works...
    I'm a real novice here. Advice on any or all of the above will be much appreciated.
    Michael

    GoonInChief wrote:
    My questions:
    1. Do I need to format the external drive before doing anything? If so, am I right in thinking that I should do this in Disk Utility > Erase, and choose 'Mac OS X Extended (Journaled)'?
    If it's not HFS+, it needs to be formatted to HFS+ (Mac OS Extended - Journaled) via Disk Utility. All data will be lost. See Answer 4.
    2. If I do this, do I need to worry about the files that were already on the drive when it arrived from the manufacturer? (I might keep the User Guide pdf, but everything else seems to be .exe files, or files for which there is no default application specified to open them.)
    If you want to keep the files, copy it to another location.
    3. Do I need to create a partition on the external HD for the contents of the old iBook HD?
    If you want to.
    4. Will Time Machine work on a partitioned external HD?
    Yes, but it needs to be formatted HFS+. If you are creating a separate partition, you use a GUID partition map for an Intel iMac (APM for PPC).
    5. Should I use Time Machine to back up the contents of my MacBook, or do it manually? The things that I'm most concerned to back up are my photographs. However, these are also the files which take up the most room on my MacBook HD (I shoot in RAW - lots of 10MB+ files), so are the obvious candidates for files to keep on the external HD in order to free up space on the MacBook. If I back up using TM, then erase some photos from the MacBook hard drive, will TM then erase them from the external hard drive as well - either immediately or when the external hard drive fills up - or will they be safe forever? Sorry, I'm not entirely clear how TM actually works...
    Absolutely NOT! TM is not for archiving. You delete files are NOT safe forever.

  • Backup Time Machine folders into another External Drive

    I wanted to know if its possible to backup five different Mac computers Time Machine folders into one major external harddrive. Right now, each mac computer has a external harddrive for backup using Time Machine. I wanted to Backup each of these external hard drives with Time Machine folder into one major external harddrive.How can I bypass that.

    It's possible-just select the desired disk on all the macs.
    Unfortunately, you won't be able to continue using the same backups you have now; you'll have to start from scratch on all the computers.
    Good luck!
    Message was edited by: joshz

  • HT201250 How long should an initial time machine backup of tack for 675 GB?s with a USB external hard drive?

    How long should an initial time machine backup of tack for 675 GB?s with a USB external hard drive?

    Not much faster than 40 GBs-60GBs per hour. So, minimally, around 12 hours.

  • Should I Update Time Machine

    Hi, Should I Update Time Machine if I don't use Time Capsule? I do use Time Machine. New posted update is very unclear on this. Thanks, Rob

    Well, not entirely, it does fix some fundamental bugs in Time Machine itself as for support for external drives. (it fixed a bug that i've had from the beginning (Time Machine would not automatically backup on the hour, only manual backups would work.))

  • Time machine fails to complete/maintain a backup

    Time machine is driving me nuts!:
    The last successful backup was one month ago.  Since that time it seems to have been stuck in a perpetual loop of trying but never successfully completing a backup, no matter what I try.  Here is the history:
    I bought a new iMac 6 months ago with OS X Lion (1Gb HDD).  Set up Time Machine over wireless network with a 1Gb WD MyBookLive attached to a new BT Homehub 3 router (UK).  Lion successfully backed up my system (total size approximately 159Gb) over a two day period, but every 4-6 weeks Time Machine would tell me it needed to create a new backup. Frustratingly, this meant that the backup history never stretched very far in the Time machine 'starfield window' but at least I had a backup of some sort.
    I upgraded to Mountain Lion 3 months ago, in the hope that it would fix the error and, briefly, things were going well.  Time Machine didn't need to create a new backup from scratch after upgrade, and continued to add to the existing backups & history for 2 months.  Then i got the dreaded 'Time Machine needs to create a new backup' message and, 1 month later, it hasn't been able to finish the process yet!
    After about 6 days it was about 30% complete (just over 50Gb) which didn't sound right given how long it previously took.  I stopped the backup using the TM dialog box , reset my mac, router and MyBookLive and started again.  Time machine automatically started again, and after several days of crawling I got the message that the 'sparsebundle was already in use'.  I followed the suggested tips regarding unmounting the drive, reset everything and tried again.  TimeMachine took about another 4 days to get to about 30Gb, then stopped itself with the message that the backup had failed.   I tried deleting the preferences files for TM as several sources suggest, but this doesn't seem to have helped, TM just takes days to crawl along and then terminates saying either simply that the 'backup has failed' or that the sparsebundle is already in use.  About 5 days ago I used the WD browser-based administration tools to create a new, separate, share for TM (presumably because this ensures that there can be no record of any previous backups on the backup device which TM sees) and set up TM from scratch.  All seemed well, it took only 23 hours to back up 103Gb - then it failed, saying that the 'sparsebundle is already in use'.  I set the backup away again overnight and it managed about 12Gb before the same message appeared.  TM now estimates 5 days to backup the remaining 40Gb.
    Somebody please tell me what is going wrong and how to get TM to actually complete a full backup then maintain it without constant intervention!!!
    Some further points worth mentioning: 
    1) My iMac is located too far from my router to backup using ethernet cable.
    2) I have used iStumbler to determine that the signal strength is 36% (surely strong enough?) with only 3% noise. (802.11n Gigabit Ethernet). 
    3) WD MyBookLive plugged into the GigE port on the router, and firmware is up to date.
    4) I've searched Pondini's tips, from start to finish looking for a solution, as well as the Western Digital and BT forums, but none of the common solutions seem to work.
    Help! and thanks.

    Thanks, Linc, for your response.  I will also seek advice from the manufacturers of the other devices, however, I fear that every party will foot the blame at the door of others. 
    I don't agree with your suggestion that this shouldn't be my only backup, given the marketing literature of both Apple and Western Digital.  Apple state on their website: 
    "Connect the drive, assign it to Time Machine, and start enjoying some peace of mind. Time Machine automatically backs up your entire Mac, including system files, applications, accounts, preferences, music, photos, movies, and documents."
    Similarly, Western Digital state about their MyBook Live:
    "Mac users can utilize all the features of Apple Time Machine backup software to protect their data."
    So where, I wonder, does the fault lie?  At the end of the day I am a home user and 'consumer' - just your average Joe looking for a robust home computing solution, not an IT boffin with an in-depth understanding of the nuts and bolts.  I expect both products to do what they say on the box.  Not surprisingly BT (the supplier of the router) state "The wireless 'N' technology in the BT Home Hub ensures you get a more reliable wireless connection throughout your home at all times."
    To me, the advantage with my set up (should it ever work) is that, should the unthinkable happen and my computer is stolen, the likelihood of my backup device disappearing with it (as might be the case with a locally attached device)  is greatly reduced because the NAS is hidden away elsewhere.

  • HT3275 Time Machine error. Unable to complete backup. An error occurred while copying files to the backup volume. Tried restarting, remounting external WD drive. Still cannot backup.

    Time Machine quit backing up files. Bought a new WD external drive. Worked for awhile, then quit backing up. Tried restarting computer, remounting drive. Message: Time Machine Error. Unable to complete backup. An error occurred when copying files. Suggestions?

    Thanks so very much for your help!! I'm boggled by it and now just about ready to dump the whole idea of Time Machine and backup using a cloning program. Maybe TM is only guaranteed to work well with Time Capsule these days?
    Today there again was no backup. I did as you suggested, looked into Console. It showed many lines of "(Error) DiskStore: No block in wakeup" and also repeatedly "(Warning) DiskStore: Ignored bogus fetch...".
    So I created a marker and attempted to initiate a backup, keeping Console open and refreshed. Here's what I got:
    8/19/13 5:18:40.385 PM Console:  Marker - Aug 19, 2013 5:18:40 PM
    8/19/13 5:19:48.844 PM com.apple.backupd: Starting standard backup
    8/19/13 5:20:00.484 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.484 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.484 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.494 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.502 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.506 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.506 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.506 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.506 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.506 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.506 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.506 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.507 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.507 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.507 PM mds: (Error) DiskStore: No block in wakeup
    8/19/13 5:20:00.507 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:37ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.507 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:37ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.507 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:37ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.507 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:37ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.507 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:37ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.508 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:38ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.510 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:40ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.511 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:41ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.511 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:41ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:00.511 PM mds: (Warning) DiskStore: Ignored bogus fetch for <MDSQueryWithBlockTask: 0x7fd15ce03400>{taskID:0x0000103a age:41ms} (not live not complete) _kMDItemQueryPath=418546
    8/19/13 5:20:20.000 PM kernel: USBF:          58091.976          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:20:51.000 PM kernel: USBF:          58122.985          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:21:22.000 PM kernel: USBF:          58153.992          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:21:53.000 PM kernel: USBF:          58185.  2          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:22:24.000 PM kernel: USBF:          58216. 14          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:22:55.000 PM kernel: USBF:          58247. 25          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:23:26.000 PM kernel: USBF:          58278. 41          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:23:57.000 PM kernel: USBF:          58309. 51          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:24:28.000 PM kernel: USBF:          58340. 59          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:24:59.000 PM kernel: USBF:          58371. 68          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:25:30.275 PM xpchelper: for uid: 501 -- timeout while waiting on FSEvents flush; clearing cache.
    8/19/13 5:25:30.000 PM kernel: USBF:          58402. 82          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:26:01.000 PM kernel: USBF:          58433. 96          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:26:32.027 PM com.apple.backupd: Backing up to: /Volumes/TMBackups/Backups.backupdb
    8/19/13 5:26:32.000 PM kernel: USBF:          58464.112          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:27:02.653 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/TMBackups/Backups.backupdb/David’s iMac size:37
    8/19/13 5:27:02.657 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/TMBackups/Backups.backupdb/David’s iMac size:37
    8/19/13 5:27:03.000 PM kernel: USBF:          58495.121          AppleUSBEHCI[0xffffff800a927000]::Found a transaction past the completion deadline on bus 0xfd, timing out! (Addr: 7, EP: 1)
    8/19/13 5:27:12.668 PM com.apple.backupd: Backup failed with error: 2
    During this 9-minute timeframe Finder also was inoperative - according to Activity Monitor: "Not Responding".
    I'm thinking it's the standalone Buffalo backup drive not waking up, and so everything comes to a screeching halt. Do you also think I should abandon TM and just do manual backups every day using a clone program?

  • Time machine has deleted/hidden *all* my backups.

    At the moment I'm using two 1TB external hard drives connected to my mac, one as storage and one just for time machine. Yesterday the storage drive died on me, so I replaced it with another 1TB drive.
    Time machine has been backing up everything on the main computer and the storage drive for several months now so I thought it would be an easy fix, just restore what was lost from the storage drive and I'm set.
    After connecting and formatting the new external hard drive I tried restoring the lost data but couldn't figure out a way to have it restore from time machine directly to the new drive. Instead, I went into the Backups.backupdb folder on the time machine drive, found the most recent backup of the files I needed from Feb 9th and just dragged and dropped it into the new drive.
    It comprised of some 550GB of data, so I left it copying overnight. Checking on it this morning, it seems that a little less than half of the data has been copied across and what's worse - time machine no longer shows any backups made before this morning. Checking in the drive contents, it seems that the backup folders no longer exist either.
    Now, I don't actually think the data has gone missing since the time machine drive is still showing that it has some 700GB of data still on it, it's just not viewable for some reason.
    I've been through Disk Utility to see if the drive needs repairing, but I'm being told that there's no problem with it. I've also checked to see if the data has somehow found its way into the trash can, but it's not there either.
    Does anyone have any suggestions as to what happened and how to recover my lost backups?

    pheadlessg wrote:
    Thanks for that. It's backing up again now but the old backups are still missing.
    I have no idea what went wrong with the drag and drop. It should have copied your data (likely with a zillion permission problems), but shouldn't have affected the TM data. There might be something in your logs, but that probably won't help now.
    Your old backups are probably hosed (pardon the technical term <grin>).
    You might be able to give yourself read rights to the .Trashes folder, and see if there's anything in it, but I doubt you'll see anything.
    To do so, select it, then +Get Info.+
    Click the padlock at the bottom of the pane, then enter your Administrator's password.
    Then click the plus sign at the bottom; you should get a selection screen for yourself. Click it.
    That should give you read rights.
    A very long shot, but worth a try.
    Most likely, you're going to end up erasing the drive/partition and starting over.

  • HT203177 iMAC & maverich Time Machine error message "unable to complete backup folder

    iMAC with OSX10.9.4 ; 8GB ram ; two partitions external disk formatted MAC jurnaled ; connected via Fire Wire or USB2 .
    During Backup the sistem get stack and display into the "details window"  Time machine was unable to complete the backup because unable to complete the backup folder.
    This problem happens with USB and Fire Wire.
    The file backups.backupdb is excluded from virus scanning.
    Also happens time to time that (without doing things) both the partitions of the external disk disappaire from the desk-top and a message "the disk must be ejected properly" is diplayed.
    This two problems are independent une to the other.
    I have change the backup disk but both the problems persist.
    Thanks for any help
    Gian Luigi

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume.

    My time machine always stops at some point... It always shows this message: "Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup volume. I have tried everything and even did time machine in safe boot as told by an apple suppoprt advisor. still the same error after 16gb

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to a failed backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the text field.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • HT3275 My New Time Machine is saying 129 Days to BackUp!

    I recently upgraded to Mountain Lion.  The time machine disk was full after it's first backup, so I bought a new  drive for Time Machine.  First, I copied the BackUP's file to the new drive after reformatting correctly.  When hooked up, it was just stuck in Preparing mode for a couple of days.   So I ended that, thinking that can't be right.  I decided to just just trash the old Backup's file and forget about the months of backups I kept. I reformatted the drive and then made it the main Time Machine back up starting from scratch.   This things been running for 2 days and it's still saying 129 Days of time to back up.  It's got like 5G of 620Gig backed up.. 
    Anyway, this can't be right.. should back up overnight or even 1 day, correct?  Why is it sooooooo slow, and only has 5G of the drive backed up after a full day?
    Also, I bought a new iMac so that's coming in next week anyway.. but thought I'd get this backed up for now. 

    I need some clarification.
    This discussion area is about Time Capsule..
    When you say Time Machine disk was full do you mean Time Capsule?
    But the prcess you describe of copying the backup from one disk to another is unlikely.. this is more likely an external drive.
    How is this external drive plugged in? How is it formatted?
    Please copy one very large file to it and get a peak transfer speed from Activity Monitor.. to make sure it is working ok.
    If the internal drive of the computer is corrupt or low reading.. it can be extremely slow to copy files for TM.
    Please run a verify of the main drive. To do it properly you should boot from original OS dvd so you can do full disk scan using disk utility.
    See A5 here. http://pondini.org/TM/Troubleshooting.html
    Fill in the details and then we have some hope of understanding the issue.

  • Time machine, did it perform a full backup?

    A bit new to this. Upgraded to a new MBPro retina, mt lion from an older MBP using migration assistant.
    After all was finished and all the files were on my new machine (I did not use Time machine to migrate or backup to the new mac, I used migration assistant), I connected to time machine to perform a completely new backup of the new machine. I have 295GB to copy over. So, it seemed to take forever. I was on day 2, noticed all the threads about the slowness, but then the new machine froze. It said it was around 170GB through it. I could have also had a bit of interuppted internet too in that time. I also could not access the internet on the new machine at all by that point. So, I rebooted and I assume by finding the disc and starting again, it looked like it picked back up at roughly 125GB. that took about 6 hours or so. So, I think that roughly it may have gotten the whole 250 gb but not sure.
    Also, on my select disc option I have two listings for my time capsule now. Not sure if that makes a difference.
    My question really is how can I see what exactly went through? I have entered time machine but can't tell really if everything in those files copied. Can I at least see the size of the backup on time machine? I would even be willing to do a forced full backup again of all 295GB, but can't seem to see how to do that.
    I am a bit new to this part, so sorry if I am asking really obvious questions. I just didn't want to find out at a later time that I only have partial backups. Thanks for any advice.

    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo tmutil compare
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
    Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

  • When I plug my ipod shuffle into the usb port of my computer, it now longer displays as a devkice plugged in. Thkis makes it impossible to transfer a new playlist to my ipod. Any suggestions?

    When I plug my ipod shuffle into my usb port, it no longer shows as a "device" over to the left. This makes it impossible to to transfer a new playlist to my ipod. Any suggestions?

    Hi deaconspeaking,
    Welcome to Apple Support Communities.
    Try looking for the iPod below the Search field in iTunes. If it doesn't show up below search, the second article provides troubleshooting tips that should help you out.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Click the button with your device's name, below the Spotlight window.
    In the main iTunes browser window, select Music.
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    -Jason

  • Time Machine - strange behavior while deleting old backups

    Not sure if this is the right place, because this is actually not on Time Capsule, but on a Time Machine on an external USB drive.
    In any case, I searched the web for "time machine delete old backups" and found many discussions of various aspects of this task. My objective is to clean up a partition on a the external drive that I no longer use for active TM backups, but to retain a small set of backups in case I need to go back to them. The partition now has other uses and I need the space. My main TM backup is now on a separate Time Capsule.
    So again my objective is not to remove all backups, but just most of them.
    It appears that the well-discussed procedure is the following:
    Go into Time Machine.
    Select the Macintosh HD.
    Go back to one of the oldest backups.
    Click on the Gear > click Delete Backup.
    This procedure will remove one Backup at a time, and it seems to take 5 - 10 minutes for each backup.
    Here is what I noticed that was "strange":
    You could delete a selected backup using the above procedure.
    For the first selected backup so deleted, there is a confirmation dialog with a warning message that it is not undoable.
    After clicking OK on the warning message, the display backs up to the "Present" backup, and the administrative password is requested.
    After the administrative password is entered, the backup starts but control is passed back to the user interface, and another backup can be selected to be deleted.
    However, after the second backup is selected and deleted, there is no warning dialog, and no request for the administrative password. At this point the user interface is busy and nothing more can be done until the backup delete is completed. Except that the Time Machine can be exited by first pressing Escape, then Cancel on the lower left of the screen.
    If the time machine is exited, there is a Delete Backups progress dialog with a progress bar for each backup  so far requested. If the second backup was requested, as in the steps above, there would be two backups.
    I discovered by playing around that either you had to wait within Time Machine for the deletion to complete, or alternatively exit Time Machine. While I was not sure what was going on, I kept starting one backup, then exiting Time Machine and re-entering Time Machine and requesting another delete operation. Each time after entering Time Machine, the warning/admin password sequence occurred and I was able to exit. And then immediately re-enter Time Machine and request another backup. Only by exiting and re-entering could another delete request be made.
    When out of Time Machine, I thus saw the Delete Backups dialog with any number of concurrent "Delete One Backup" progress bars.
    Because of the nature of the hard links used to indicate backups, I was wondering if these multiple delete operations could possibly be hung in a deadly embrace, so I decided to only do one at a time. Some further study to see if the multiple delete operations were all able to complete would be needed to know if this would be a good way to "queue up" multiple delete requests.
    Bottom line: seems like kind of an odd implementation. Would be really nice if you could select many (say 30) individual backups and delete them all at once, rather than taking 5 - 10 minutes each. Again, this is because I am trying to reclaim disk space, but not delete all the backups from a Time Machine backup set that is not in active use.
    Also, the method of "queuing up" backup delete requests is kind of odd, but seems to work, with the proviso that I have not yet confirmed that doing more than one at a time actually works.

    Heinz-G?uenter Arnold wrote:
    since the upgrade to SL it seem that Time Machine has problems to completely remove old backups completely. The "removed" backups do not show up in Time Machine anymore, but the backup folders and part of their contents can still be seen in Finder.
    Hi, and welcome to the forums.
    That happens occasionally, in both Leopard and Snow Leopard, sometimes after something was deleted from the Finder, but also after an abnormal shutdown or improper disconnection of the TM disk.
    Run a +*Repair Disk+* on it via Disk Utility, in your Applications/Utilities folder. If it finds errors, but can't fix them all, run it again (and again) until it either fixes them all, or can't fix any more.

  • Is it possible to reinstall Mac OS X Lion on MacBook and then use Time Machine to restore to the previous backup I made before reinstalling Mac OS X Lion?

    Is it possible to reinstall Mac OS X Lion on MacBook and then use Time Machine to restore to the previous backup I made before reinstalling Mac OS X Lion?

    My MacBook was not normally booting up. It would turn on, make the Apple startup noise, and the bottom loading bar would progress just a little bit, then my MacBook would shut down. I tried rebooting it many times and the same thing would happen, it would just shut down. Then, I read that I can reset the PRAM (by holding Option+Command+P+R after the Apple startup noise comes). That worked, but now I get a screen that asks me to choose one of the 4 options (see:  http://images.macworld.com/images/article/2012/07/lionrecoveryutilities-289404.j pg). I choose Restore From Time Machine Backup, but it progresses to 17.6% and gets stuck there forever. I tried doing it again, and it got stuck at 17.6% again. That is why I am asking if I should just reinstall Lion, then restore a previous backup on the fresh new Lion?

Maybe you are looking for

  • Need to run a report from monday to today

    Hi, I'm writing sql to run a report based on post date. It is to be hard-coded so that it runs every monday of the current week to today, and I am a bit weak in this area, any help would be appreciated, thanks!

  • Albums from the iTunes Store are marked as deleted

    Some songs from some albums or the whole album have been marked as deleted status in iTunes Match. All of them purchased from iTunes store. I guess is a problem syncing the same iTunes Match in two different computers (one is a Mac, the other a Windo

  • Where to Download Photoshop Elements 9?

    I have the DVD but my EP121 Slate has no usb DVD drive to install Photoshop Elements 9. I tried to use my MacMini's DVD drive to copy the PSE9 folder to a USB drive but it only copied a bunch of osX install files and XML files. I don't want PSE11, no

  • Deposit Advice (XML)

    Hi Friends, Has anyone implemented Deposit Advice (XML) successfully? IF Yes.. then..I have an issue.. We are trying to implement the Deposit Advice (XML). It is generating inconsistent results. One time it generates the PDF Output and the Other time

  • ADOBE FLASH and Silverlight

    accidentally deleted adobe flash player and silverlight plug in. Netflix and videos on Facebook will no longer load. I reinstalled both but it's like nothing happened neither one work. what's the issue?