Should I remove ini files from my macbook pro or just leave them?

I regularly move music files from my Windows PC to my MacBook Pro. However I have just realised an ini file which has occurred. Should I remove these files from my MacBook as I don’t want any problems to occur as I use my MacBook Pro for live gigs (to DJ).
Appreciate your responses.

Copies them.
Ciao.

Similar Messages

  • The storage/removal of files from my MacBook Air as they pertain to a Keynote Presentation

    A question about the storage/removal of files from my MacBook Air as they pertain to a Keynote Presentation.
    I have a rather sizeable Keynote (about 7GB) since it has several QT Movies embedded.  And the key word is embedded:  if I was to remove the “original” QT files and other large graphics off the HD (in an effort to regain some space on the 250GB onboard flash drive) and in Keynote Preferences I have checked “copy audio and movies into document” then the Keynote presentation remains intact and does NOT need any of those QT files living on the MBAir itself.  I could keep them on a separate dedicated FW drive for future inclusion and/or editing. 
    That is – the Keynote presentation will stand as its own complete file and does not need to reference those files sitting on the HD in order to work as they have been copied into the Keynote presentation itself (and hence their propagation is what is also accounting for the disc space concern).
    I am concerned that if I remove the files then the slides that do require QT won’t be able to “find” the files…..but I am working under the assumption that the above steps have ensured that they are integrated into the actual presentation file and do not need to “find” them on the HD.  Make sense?
    Thanks
    Theo

    Great!  Thanks so much for the quick reply, Gary  Much appreciated.
    T

  • I am unable to copy files from my macbook pro to my external hard disk.

    I am unable to copy files from my macbook pro to my external hard disk. I tried to copy a movie 800mb in size to my EDD and  it shows the loading box and it says zero kb loaded out of 800mb and sometimes it loads a a few kb of the file, then after a while it ejects my hard disk and gives a message saying you should have ejected it properly. and it sometimes gives this message
    "The Finder can’t complete the operation because some data in “....” can’t be read or written.
    (Error code -36)".
    This happens with a range of files if they are more than a few mb in size, so I am pretty sure its not the file problem. It also occurs sometimes when i try to copy from my EDD to my mac.
    I have tried everything. I formatted my EDD to MS-DOS (FAT) format because i need to use it with mac and windows. I tried resetting The SMC and the PRAM and NVRAM. I tried verify and disk repair on disk utility. But the same thing happens over again and it is really frustrating. The problem doesnt happen with my PC.
    My EDD is an  Apollo 320GB hard drive from Imation.
    Also are there any particular EDD brands that may not have this issue with MACs and can be used on mac and PC?
    Thanks in advance!

    Hey guys,
    So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
    Aaisha

  • How do I transfer a music file from my MacBook Pro to my iPhone?

    How do I transfer a music file from my MacBook Pro to my iPhone?

    If you download Adode Reader (free but very limited) or GoodReader (many features) - you can use file sharing.
    Connect the iPad to the Mac and launch iTunes. Select the iPad on the left side under Devices. Click on the Apps tab in the iTunes window on the right. Scroll down to the File sharing apps window. Click on the file sharing app that you are using (Adobe Reader or GoodReader in this example). Drag the document from the desktop onto the file sharing window on the right side - or click on the add button in the lower right corner - and navigate to where the file is on the Mac and select it that way.

  • How can I transfer files from my macbook pro to my ipad w/ retna display via my USB,  I can't get maverick or icloud to load on my macbook.

    I just bought a new ipad and would like to transfer files from my macbook pro.  I cannot get icloud to work on my Macbook.  I cannot get Maverick to load on my macbook.

    if I plug my ipad to my macbook nothing happens except it charges.  no screen prompt like I would expect.

  • Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

    Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

    This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
    I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

  • How can I remove unwanted downloads from my macbook pro?

    How can I remove unwanted downloads from my macbook pro?

    Go to the Download folders as specified in the browser's or mail app's preferences and delete what you don't want to keep.

  • How do I remove a printer from my MacBook Pro?

    How do I remove a printer from my MacBook Pro?

    Open Print & Scan preferences. Select the installed printer in the list. Click on the Delete [-] button below the list.

  • How do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

    how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

    More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
    If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT.

  • How do i copy files from my macbook pro to a usb drive

    how do i copy files from my macbook pro to a usb drive

    Connect USB drive to your MBP, format as "Mac OS Extended (Journaled)" with a single GUID partition using Disk Utility and copy away.
    Clinton

  • How do i remove tuneupmymac software from my macbook pro

    how do i remove tuneupmymac software from my macbook pro?  not sure how it got on my macbook but i want it off.

    alright dude.. don't use cleanmymac
    use one of the applications on the app store... apple wouldn't add an that would harm your device!
    Simbooster Lite - Free
    https://itunes.apple.com/us/app/simbooster-lite/id882312406?mt=12

  • Best way to transfer files from old Macbook Pro to new one?

    I just got a new Macbook Pro from Apple...YEEEEAAAHHHH! 
    So....
    What's the best way to transfer files from old Macbook Pro to new one?  I know Migration assistant, but is there a recommended way?  I don't want to put do a system restore or transfer everything from the old laptop, but I do want to move important things like photos, music, documents and such over.  Any suggestions on best way to do this?
    Another question, perhaps subquestion.  If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?
    Just looking for hints from the experts so this puppy is set up in the best way possible.

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    Try this article - http://support.apple.com/kb/HT4889.
    If it doesn't help, post back in this thread.
    Best of luck,
    Clinton

  • How to transfer photo and movie files from my macbook pro

    My Hard drive is almost full how can I transfer my music and video files from the MacBook Pro to an external drive (I would like to keep my video and photos on a separate drive to keep overload from happening again). I also have a Time Capsule, can I transfer those big files to Time Capsule?
    Thanks

    Have you read for possible solutions over in the "More Like This" thread over here?-----------------------> 

  • What is the best way to remove all info from a MacBook Pro before passing it along to someone else?          passing it on to someone?

    What is the best way to remove all info from a MacBook Pro before passing it on to someone else?

    Read this: http://www.tuaw.com/2010/09/24/mac-101-preparing-your-old-mac-for-sale-or-recycl ing/

Maybe you are looking for

  • OCR Text in Adobe Acrobat 8 Pro

    Is there a way to set in preferences that when I hit my highlight text button that it automatically OCR the document like it used to? Also is there an OCR button for the tool bar.

  • Connect TV to MacBook

    I recently purchased a new television which is supposed to be able to connect to a computer. Which cord do I need to purchase? Thanks!

  • Albums vanish

    I thought I would make friends with Aperture. I shot about 3000 images for an advertising shoot and loaded them into Aperture. I created albums for each shot and imported most of the images. I organized the days as projects with albums created for ea

  • BPC user management

    I'm looking for a way to automatically add users to BPC and assign them the appropriate permissions.  I plan on using an Identity Management system to create the account but can't figure out how to integrate with BPC.  For example, in ABAP systems we

  • How to set up the -classpath in javadoc

    Hiya, I have used Runtime.exec() to execute javadoc. The problem is with the classpath coz i keep getting "No source files for package pkgnmxxx.clsnamexxx" My doclet class resides in the following folder: f:\projects\dsim\SExecutive\DiscoverClasses.j