Should I replace the hard drive or the motherboard on my pavilion dv9610?

Issues black screen, laptop attemps to start, can hear fan and disk and power led flash, also SD slot led and quick play dvd strip led's come on then shut off after 2 seconds stays off for 5 sec and repeats over and over again (on 2 sec. off 5sec)
I have tried external monitor - no results
did hard reset
reseated the hard drive and memory.
warranty over, what is the next best move?

Hi,
From what you describe, I would say the problem is with your video chip, however this is really just my best guess.  One possible solution you may want to try is getting the GPU reflowed - the guy on the link below has a good reputation for doing this and if it turns out the GPU is not at fault he only charges a diagnostic fee of $29.99.  At least it's an option to consider.
http://cgi.ebay.com/HP-DV2000-DV6000-DV9000-TX1000-Laptop-No-Video-REPAIR-/260674058980?pt=LH_Defaul...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • Should I replace failed hard drive in imac 4,1 or run from external or mac mini?

    My hard drive failed in my iMac 4,1 (early 2006 intel). I am running from an external drive, but slow. Should I replace the hard drive ($300 at Apple), purchase a better external to run from or a mac mini? I'm trying to determine if it makes sense to invest further in this iMac since its 5 yrs old already. Can any one offer some insight/opinion?

    Hi moreenie
    Your profile does not indicate your geographic location, but there are Authorize Apple Service Providers that can and will do the work for considerably less than your local Apple Store.
    http://www.apple.com/buy/locator/service/
    Call around, at less than $200 to replace the Hard Drive, it makes a little more sense to fix and use it for another year or two...
    I replace the Hard Drive in my Early 2006 a couple of years ago not because it died, but because it became to small.
    Sorry I can't honestly help you decide, because I'm torn and can't decide for myself. Not liking the Glossy iMac's, I've also been toying with the idea of either a Mac-Mini or used Mac Pro? My biggest problem with the Mac-Mini is, that by the time you do a few upgrades it cost as much as a base iMac.  
    Dennis

  • How do I back-up and replace my hard drive that has crashed on a Pavilion a350n with XP?

    HP Pavilion Desktop a350n with Windows XP. System went through a CHKDSK scan, had a bunch of errors, then when it was done checking, a American Megatrends screen came up with status and at bottom says
    "Master hard disk: S.M.A.R.T. Status: BAD, Press (F1) for Setup, (F7) to Continue".
    Want to know how to proceed before I start to press buttons and screw something up. Thanks in Advance for any help you can give.....
    This question was solved.
    View Solution.

    88feederups wrote: HP Pavilion Desktop a350n with Windows XP. System went through a CHKDSK scan, had a bunch of errors, then when it was done checking, a American Megatrends screen came up with status and at bottom says "Master hard disk: S.M.A.R.T. Status: BAD, Press (F1) for Setup, (F7) to Continue". Want to know how to proceed before I start to press buttons and screw something up. Thanks in Advance for any help you can give.....
    Hello 88feederups, It seems your only recourse is to press the F-7 key to continue, and see if the system will boot to the desktop.
    If you manage to get to the desktop, I would suggest trying to back up your important data, and make sure you have a version of Windows XP. You should also consider locating a new hard drive.
    The failed Smart Test can be a precusor to the hard drive failing completely, if not already.
    Here  is the link for the specifications for your system and it shows the system shipped with a 160 GB Ultra DMA hard drive.
    This is an IDE ATA type hard drive and not the newer Sata type.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

    Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
    I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
    Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try.  I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
    Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
    Thanks for any help!

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

  • Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?

    Install iTunes.
    Once install, hold SHIFT and launch iTunes.
    When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive.

  • I replaced my hard drive and used time machine to boot from but it installedthe unrepaired disk permissions of the faulty previous drive would this cause problems on my new drive?

    I replaced my hard drive on macbook pro and used time machine to boot from but it also installed the unrepaired disk permmissions of the other drive, would this cause problems to my new drive?

    Can you remember what the permissions problem was that you had before? You may need to reinstall OS X from scratch and not reinstall anything from your Time Machine backups. To be on the safe side you should reinstall all third-party applications from scratch, as well. Then only restore from your backup your document/data files.

  • What is the proceedure for replacing a hard drive (after failure) for RAID 5 with IX4-300D?

    I have the IX4-300D with 4 hard drives (identical Seagate drives) using RAID 5.
    Someday a hard drive will fail and I and I have to replace it. I read through the users manual briefly and I didn't see any documentation on how to perform a hard drive replacement and not lose any data.
    So here are my questions:
    1) I know per the instructions that Lenovo prefers using identical hard drives. Let's say in 2 years, 1 hard drive fails. Most likely, the same model Seagate hard drive will not be available. So will using a replacement hard drive by the same manufacturer with similar specifications work?
    2) Will the front panel (or the software) tell me which hard drive has failed?
    3) What is the proceedure for replacing a hard drive after a failure occurs? I read that the IX4-300D is not hot-swappable. So do I just power the IX4-300D down, replace the hard drive, and turn it back on?
    Solved!
    Go to Solution.

    Hi exceptionalht,
    It is best to replace the hard drive with one that is the same manufacturer, rotational speed, and capacity, so it does not have to be exactly the same model.
    The front panel should show which drive has failed. If not you can check the web interface to find out.
    That is the basic procedure for replacing a hard drive. You can see a more detailed instructions here: Installing hard drives in an ix4-300d 
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

    I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
    Where do I find this library?
    thanks
    Shak

    Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
    Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
    Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
    (1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
    If that doesn't work
    (2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
    If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
    From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
    This may take a while. Once completed, re-open iPhoto.
    And that should (I stress should) cure it.
    Good luck.

  • I replaced my hard drive and am installing the OS 10.5.6 that i got from Apple. It is stuck with 7 minutes remaining. Help! this is the first time I've ever done this.

    I just replaced my hard drive in my 13" Macbook. I got the OS install disk from Apple but it's stuck with 7 minutes remaining. What do I do now? I let it check the disk before the install.

    Did you properly prep your new drive first?
    Drive Preparation
    1.  Open Disk Utility in your Utilities folder.  If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.
    I think you should shutdown the installer then erase the drive per the above and start again.

  • I had downloaded OS X Mountain Lion and had to replace my hard drive. Now when I try to download it only wants to upgrade since I show that I previously purchased it. What can I do to get the operating system back

    I had downloaded OS X Mountain Lion and had to replace my hard drive. Now when I try to download it only wants to upgrade since I show that I previously purchased it. What can I do to get the operating system back

    I'm unclear on what the problem is. Have you installed a system on the new hard drive, and if so, what system? Had you actually installed Mountain Lion previously, or only downloaded it? And what does "it only wants to upgrade" mean? Have you actually got Mountain Lion already installed? (See About This Mac in the Apple menu.)
    All Macs that shipped with Lion or newer are capable of internet recovery in situations like this. Just hold down command-R and it should start in recovery mode over the internet if necessary. You can reinstall the system from there. If you had Mountain Lion, I would assume that Mountain Lion would be the system you would get reinstalling that way.

  • I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one.  Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not enough space?

    I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one.  Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?

    Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
    If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups.  See #B6 in Time Machine - Troubleshooting, especially the pink box there.
    If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD.  See Time Machine - Frequently Asked Question #14 for detailed instructions.  That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups.  Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion.

  • HT1420 I replaced my hard drive now cannot get itunes to authorize this same computer because I guess the drive ID is different. What a pain in the butt this system is.

    Replaced my hard drive now Itunes tells me I have more computers that authorized.
    I cannot deauthorize this computer as it is the one I use all the time and two of the others are long gone.
    What a PITA
    Thanks

    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    If Disk First aid is unable to complete the repair you will need to use a stronger 3rd party utility like DiskWarrior or TechTool Pro.
    Once this process has been completed restart your computer.
    Utilities & info regarding checking your HD space: 
    Where  did  my  Disk  Space  go? 
    Slimming your hard drive
    Seven ways to free up drive space
    OmniDiskSweeper is a free utility that checks HD space.
    FreeSpace cost $1 or is a free utility that checks HD space.
    SpaceControl is a free utility that checks HD space.
    Disk Inventory X
    WhatSize
    SpaceControl

  • Apple replaced my hard drive (1tb seagate) and now I can't access my Microsoft office because the license was compromised. is this fixable? or will we be adding this to the list of lawsuits..

    apple replaced my hard drive (1tb seagate) and now I can't access my Microsoft office because the license was compromised. is this fixable? or will we be adding this to the list of lawsuits..

    You can reinstall MS using your install disk(s) and the original registration key(s).
    As for your threat, you might want to read the Software License Agreement as well as the Hardware warranty. They are available here:
    http://www.apple.com/legal/sla/
    Here is an excerpt from the SLA:
    8. Disclaimer of Warranties. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT, TO THE EXTENT PERMITTED BY APPLICABLE LAW, USE OF THE APPLE SOFTWARE AND ANY SERVICES PERFORMED BY OR THROUGH THE APPLE SOFTWARE (COLLECTIVELY “SERVICES”) IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, ACCURACY AND EFFORT IS WITH YOU. EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET FORTH ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE APPLE SOFTWARE AND SERVICES ARE PROVIDED “AS IS” AND “AS AVAILABLE”, WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND APPLE AND APPLE'S LICENSORS (COLLECTIVELY REFERRED TO AS “APPLE” FOR THE PURPOSES OF SECTIONS 8 and 9) HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE APPLE SOFTWARE AND SERVICES, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF SATISFACTORY QUALITY, OF FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. APPLE DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE APPLE SOFTWARE AND SERVICES, THAT THE FUNCTIONS CONTAINED IN, OR SERVICES PERFORMED OR PROVIDED BY, THE APPLE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE APPLE SOFTWARE OR SERVICES WILL BE UNINTERRUPTED OR ERROR- FREE, THAT ANY SERVICES WILL CONTINUE TO BE MADE AVAILABLE, THAT THE APPLE SOFTWARE OR SERVICES WILL BE COMPATIBLE OR WORK WITH ANY THIRD PARTY SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES, OR THAT DEFECTS IN THE APPLE SOFTWARE OR SERVICES WILL BE CORRECTED. INSTALLATION OF THIS SOFTWARE MAY AFFECT THE USABILITY OF THIRD PARTY SOFTWARE, APPLICATIONS OR THIRD PARTY SERVICES. YOU FURTHER ACKNOWLEDGE THAT THE APPLE SOFTWARE AND SERVICES ARE NOT INTENDED OR SUITABLE FOR USE IN SITUATIONS OR ENVIRONMENTS WHERE THE FAILURE OR TIME DELAYS OF, OR ERRORS OR INACCURACIES IN THE CONTENT, DATA OR INFORMATION PROVIDED BY, THE APPLE SOFTWARE OR SERVICES COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE, INCLUDING WITHOUT LIMITATION THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE SUPPORT OR WEAPONS SYSTEMS. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY APPLE OR AN APPLE AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE APPLE SOFTWARE OR SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE EXCLUSION AND LIMITATIONS MAY NOT APPLY TO YOU.
    9. Limitation of Liability. TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT SHALL APPLE BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, LOSS OF DATA, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR USE OR INABILITY TO USE THE APPLE SOFTWARE AND SERVICES OR ANY THIRD PARTY SOFTWARE OR APPLICATIONS IN CONJUNCTION WITH THE APPLE SOFTWARE, HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION MAY NOT APPLY TO YOU. In no event shall Apple's total liability to you for all damages (other than as may be required by applicable law in cases involving personal injury) exceed the amount of fifty dollars ($50.00). The foregoing limitations will apply even if the above stated remedy fails of its essential purpose.

  • I just replaced my hard drive on my imac and now when i turn the computer on the fan is running and slowly gets louder and louder. how do i turn it off?

    I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
    thanks.

    If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.

  • It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    It seems like I just missed the interval for the hard disk replacement program. I purchased in March 2009 a 24 inch Intel iMac . How much does it cost to have apple support at an Apple Store replace a hard drive?

    My hard drive continually has the floating beach ball and will take massive time to fulfill a request. And then will not boot up...so then I have to do a restore and rebuild hard drive from a past saved time machine version. Works for a little bit...then the floating beachball comes more and more...until it will not boot up again. So then I restore from a previous time machine saved version....and again it works for a day or so ... until it happens again. Now it's happening faster and faster...so I think my hard drive is dying.

Maybe you are looking for

  • How to use home sharing for more that five Apple TV 2nd?

    Hi, i know that itunes works (with "home sharing" functions activated) only with max n°5 Apple TV 2nd and n°5 Idevices. Now, i've a problem because i need to have n°10 Apple TV that work in the same time with itunes installed on Mac Mini (lion OSX).

  • I HAVE A HP PHOTOSMART C4700 AND I CANNOT CONNECT IT WITH MY IPAD 2 TO PRINT

    I have Photosmart C4700 and want to print from IPad Air 2. Is my printer airprint? If not, is there a way to print from the Ipad or will I need to get a new printer? If I need a new printer...do you have a list of suggested printers that would be sim

  • 3D not working in Photoshop CS6

    Hi. im using pc with windows 8. and i just downloaded the trial version of photshop cs6. for some reason everytime i try to use 3D, it doesnt work. It says you are trying to convert from the current selection and there is no current selection.

  • Subject in the mail sent through Batch Job

    Hi, We have a batch job which is running daily. Consumer wants the output of the batch job (spool request) in mail. We generally send the mail from batch job by filling the mail id in "Title field".. there is some third party involved in managing spo

  • Portlet content not displaying

    Hi, I cannot view the content of my portlets.The error message i get is : ERROR: Content is not available. even when loading the sample jsr 168 channels i get the same error message. Not sure what i am doing wrong. I'll explain what i am doing: i hav