Should I slice text or not?
If I put a slice on my text does it hide it in a div tag in the html code? I'd like it visible so that my page is deemed "relevant" to the search engines when it views my content.
Thanks-
Stacy
That will have to be hand coded. Or Dreamweaver.
Similar Messages
-
Item text is not getting updated in Payment document generated through F110
Hi all,
After generating the payment document via Transaction Code u2013 F110, system is not updating the Text field in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
While processing the document via transaction code u2013 F110, in the layout shown for the Invoices to be considered for payment (screen of u201CEdit Proposalu201D), text is not getting updated. When we pressed F1 at the Text field (Which is blank) we came to know that it is a u201CItem Textu201D with u201CTable u2013 REGUEu201D / u201CField u2013 SGTXTu201D.
In BSEG (SGTXT field) as well as BSIK (SGTXT field) we are getting the Invoice document with the text maintained in it via MIRO or FI invoice.
But while processing the invoices through Tcode - F110, in the layout of Edit Proposal (Table - REGUE / Field - SGTXT) we are not getting the u201CText fieldu201D but getting the other data such as Doc. No.( Table - REGUE / Field - BELNR), Fiscal Year (Table - REGUE / Field - GJAHR) etc for processing the proposal which is getting shown in BSEG as well as BSIK.
In case of manual payment (F-53) we can input the text manually hence that will get updated in payment document but this thing is not possible with F110.
Can anybody guide me on getting the ItemText (Not Doc. Header text) in FI payment document after F110 execution?
Regards,
ShridharHi Suresh,
Thanks for the prompt reply. We will be obliged if you guide us in that respect since F110 is a Std. SAP code.
Have you refer OSS before arriving at the conclusion of developing ABAP program since the Item Text is a std. field of Std. Tcode - F110. Same should had been get updated while making the payment in reference to the Invoice which haves item text in it ?
Regards
Shridhar
FICO -
Text messaging not working on my BB curve 8530
My husband is on the same plan as me, but he has an android phone. I can send and receive text messages from him and myself, however, I can not send or receive text messages from anyone else. I've taken the battery out, updated my phone profile through the blackberry network and don't several other trouble shooting methods.
When I send a text it says that it goes through. When I got my phone I started texting my friends and family and received no response, thinking that everyone was just busy. When I talked to them later they said they never received anything and like wise, they sent me texts that I had not received as well.
I'm on Virgin Mobile and have called them several times now. The first person said that it should be working in 2-4 hours and that he would call me back. 4 hours later, It was not only still not working, but he had never called me back. The next person I called had me do all the trouble shooting that I had already done and then he told me it should be working in an hour. Three hours later it was still not working so I called again, this time I spoke to a lady that had me do all the trouble shooting again and said that she fixed it.. over the phone I texted google to be sure, and sure enough .. STILL DID NOT WORK. She said "oh.. well.. you need to talk to one of our blackberry specialists". After forwarding me to someone, he had me trouble shoot again... He said it should be working in 30-72 hours and that it was a problem with the blackberry network. I'm not sure I should wait 72 hours for it to work... especially when in the past they haven't called me back.
1.) I can still make phone calls
2.) I can text my husband and can receive texts from him
3.) I can access the internet and download and upload files
There is no indication on my phone that the texts are not going through, I get that little check mark by my text messages and everything looks normal.
Is this a simple fix? Is everyone experiencing this problem?Hello !
Do you have activated BlackBerry Internet Service (BIS) Plan on your device?
Kindly check with your service provider.
And if it is activated, then does your plan cover to use any other messenger like Yahoo, Gtalk etc or not.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest there time on this Message anymore.
Thanks. -
Text Fields Not Showing in Design or Live View
Hello Everyone,
I have run into a problem trying to create a simple contact form through Dreamweaver CS6. I have two text fields for Name & Email, and 1 text area for Comments. The issue I am running into is that the text fields are not showing in Design or Live view. I have set-up all variables required for the server for the form to work... but that should not have any effect on the text field showing... I tried uploading my contact page with the same result of no text fields showing...
What is really laughable is that the "text area" I placed in my form for Comments shows up in Design & Live view just fine. I am thinking that I am missing something, but just do not know what exactly. The form is styled through CSS.
Here is the form code:
<div id="CRDForm">
<form action="http://www.sweetformimi.com/formmail/formmail.php" method="post" enctype="application/x-www-form-urlencoded" name="contact" target="_self" id="contact">
<input type="hidden" name="env_report" value="REMOTE_HOST,REMOTE_ADDR,HTTP_USER_AGENT,AUTH_TYPE,REMOTE_USER">
<input type="hidden" name="recipients" value="[email protected]" />
<input type="hidden" name="subject" value="Contact Form" />
<label><p>Your Full Name
<input name="Name" type="text" id="Name" size="40" /></p>
</label>
<label><p>Email
<input name="email" type="text" accesskey="2" tabindex="2" title="Email" value="Email"></p>
</label>
<label>Comments<br />
<textarea name="comments" cols="40" rows="10" accesskey="3" tabindex="3" title="Comments"></textarea>
</label>
<input name="submit" type="submit" accesskey="4" tabindex="4" title="submit" value="submit">
</form>
</div>
Are there other variables I should be thinking about in the rest of my site? I am using a fluid grid layout. I have CSS for desktop, tablet, and phone devices. I also have a primary CSS file that imports all three. The sites structure was done by using <header>, <article>, <footer>, and of course <div> tags.
Has anyone ever experienced the "text fields" not showing up before? Is it a simple fix as reinstalling Dreamweaver CS6? Finally, another thing I should mention is that I did have a previous version of Dreamweaver on my comp, which was CS3. I did not uninstall that before installing the newer version. I assumed (and I could be wrong here) that it would automatically replace the older version.
I apoligize for it being long winded, but I am looking for some help on this issue...
Thank YouHey thank you osgood for the reply!
When I look at code for long hours it sort of blurs together, and I miss things... I think that happens to the most of us
Ya I found what was blocking my text fields in my desktop.css
I primarily work through code view, and currently working on quite a few projects kind of makes your eyes miss the small errors.
Thanks again! -
Text layers not saved correctly as PDF from PS?
I frequently save layouts I do in Photoshop as PDF's. Lately I very often will discover the text does not display correctly in the PDF. One or two lines of text will display as white with a thin black outline, rather than as the basic solid black I'd specified.
I work on a Windows 7 machine with the current version of PS. The text is on layers when I save the file to PDF (from PS), but I do not include the layers in the PDF, so they should be flattening down.
Any ideas why this happens? I noticed a few weeks ago when it was also doing this that I updated the program a day later and the PDF's were not exhibiting this issue. But, now it's starting again. A big timewaster for me.
Thanks for any suggestions offered.Text doesn't flatten until you tell it to. In fact that may be the problem here - you are telling the PDF maker to not retain vector text and when it tries to flatten, some layer style or something else gets in the way. Try to play with the PDF options. also manaulyl flatten the document in PS before saving to PDF...
Mylenium -
PO item text does not display in form at first. Only after saving PO
Hi Guys,
We're facing a peculiar situation. We print line item texts of a PO in the smartform. However what we noticed was that as soon as the PO is created and we choose to print the po, the item texts do not appear. When we checked in tables STXH and STXL theese texts were not even registered in the tables. All this time the PO is saved.
Then we went back into the PO in ME22n, made a slight change somewhere and saved the PO. Now these texts appear in the tables STXH/STXL and also in the print out. What could the reason be?
Regards,Hi
You should check your PO customizing, probably the text is set to be loaded in modification only
Max -
[JS] Found text is not a text?
Hi,
Could you help me to find a reason of 'undefined is not an object' error, pls?
app.findTextPreferences = NothingEnum.nothing;
app.findTextPreferences.appliedParagraphStyle = myParaStyle;
mFound = myStory.findText();
if (myFound.length > 0)
mStart = myFound[0].insertionPoints[0]; // here is error 'undefined is not an object'
this is a part of preety long code and I wouldn't paste it here, but:
I checked some variables properties:
mFound.length = = 1 so InD found some text, I guess;
mFound[0].constructor.name = = "Array";
mFound[0].length = = 0;
so what is found by ID (which .appliedParagraphStyle = = myParaStyle) and why this is not a text?
If I run this part of code manually, starting from point where script ends ==> mFound.length = = 0.
I know that I made mistake(s) somewhere, but I have not idea what should I look for...
Has 0-element Array some property to check and discover, where it came from?
Help me pls.
ThxNow to your question:
1) Usually, myArea.findText() will return an Array of zero, one or more Text objects. In other words, provided that myFound.length > 0, each myFound[i] should be a Text specifier. This is what happens if myArea is the Application, a Document, a Story, or any singular Text specifier.
2) BUT, if for some reason myArea is a plural specifier—such as myStory.paragraphs.everyItem()—then myArea.findText() will return an Array of Array(s) of Text(s). The outer array reflects the plural behavior of the specifier, while the inner arrays reflect the return type of the findText() method. In that case you may have empty arrays within the outer array. Indeed:
myStory.paragraphs.everyItem().findText()
will send the findText() command to every paragraph, so any paragraph that does not match the query will produce an empty array.
Maybe your script leads to something similar. We'd need to see more code to figure it out.
@+
Marc -
Video looks good, text does not
My video looks good, but the titles, Ariel bold - 78 pt bold and 68 pt regular, white text on top of black bar set at 50% opacity look lousy. The text is not crisp and angular as it should be. It looks great on my monitor and when rendered to flv, but when rendered mpeg-2 to dvd with the highest specs as instructed, it looks lousy. In fact, it looks the same as when I rendered it with the default settings to dvd. Any suggestions?
I just found this on the web, is this the best solution?
"Never use premiere for effects, titles, ect. Use After Effects then render it to a uncompressed animation clip - alpha settings selected. reimport to premier lay it down and gaze at beauty. Compression is bad, premier compresses everything it renders, the more you compress-layers, the more degredation and pixelation"
I posted the Creative Cow message on the After Effects forum and was told to ignore it. I have rendered in so many different ways and configurations to mpeg-2 and my titles that are 68 px and 78 px still look almost rounded instead of angular and crisp. Help....
Thanks so much,
LisaWell first off i will start with mpeg2 dvd is ancient and horrible technology and always looks bad to me... that being said what are your specific specs. If you have an hour or video or less then you should be encoding as 9mbit CBR and that is as good as your going to get.
for all we know you could be trying to put 3 hours of video on a single layer dvd and using 3mbit data rate which will look very bad.
there could be several issues, are your fields correct? reversed fields can make graphics look pixelated. what are you viewing your dvd on that makes it look so bad? i have noticed many hdtv lcd flat panels when given a SD DVD video look horrible.
export a single still image of your text and view it in photoshop, then render out a mpeg2 version of your video and import it back into premiere and export a single frame of it also. then load them into photoshop and compare, you can composite them side by side and post a pic for us to see what you are describing and try to troubleshoot it for you. -
In mail preferences unable to set the outgoing STMP setting. Incoming server seems to work OK . Impossible to send an email on any account - main or sub accounts. continually requests passwords for each account which have been reset in verizon.net. Can receive and send @ verizon but is not a simple procedure.
Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) -exec ls -Odel {} \;
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The normal amount of output from this command, below what you entered, is about 80 lines, sometimes less. If you get much more than that, don't post it; just reply that it happened. If you get less than about 100 lines, post them — the text, please, not a screenshot.
If any personal information appears in the output, edit before posting, but don’t remove the context. -
Using a Variable in SSIS - Error - "Command text was not set for the command object.".
Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
</Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCPWhat happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari -
Session Timeout Alert text is not getting displayed on web ui.
Hello,
In "Session Timeout Alert" pop up we are facing one issue. The pop up is getting displayed as per the value in rdisp/plugin_auto_logout parameter i.e. 1800. But the text is not getting displayed.
I have implemented the SAP Note 1877120 also. Any inputs to resolve this issue.
Thanks.Hi Sigrid,
When we do pre activities related to OTR, need to save it in standard name space only ? could you guide me pls.
in the below we have Alias and package are standard.
1.) There are 4 texts which needs to be configured via SOTR_EDIT to get the translation according your languages implemented in your CRM.
a.) Start doing it by opening transaction SOTR_EDIT.
b.) Change to the language you would like to use.
c.) As ALIAS enter first CRM_IC_CMP_FRAME/SESSION_PING_TITLE. Click on Create and confirm the following dialogues.
d.) Enter CRM_IC_CMP_FRAME as package and the object type as WAPP.
e.) Finally enter the translation according your language from the english version (length of text: 25):
"Session Timeout Alert !"
f.) Save you changes
Repeat the steps a.) to f.) with the following aliases and options:
Jimmi -
Material text is not getting updated in the VBAP table
Hi All,
There is an customized field in the sales order which picks up the addition material information maintained for a material. When we create the sales order the text appears. After we save the sales order, when we open the sales order(VA01/VA02), the text does not appear. If you check the VBAP table, the field which stores this text is blank. It will not update when we save the sales order.
Could someone please let me know how can we check this problem.
Regards,
SwathiHi
Usually, this fields (zzfield) are populated with the subroutine userexit_move_field_to_vbap in include MV45AFZZ.
I hope this helps you
Regards
Eduardo -
What should I do I do not want chrome
What should I do I do not want chrome
Settings-apps-all-chrome,disable.Download other browser from google play.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
hi,
whenever i am executing this in french , the text is not coming in french language .
but in english it is coming perfectly..can some body give the reason??
at selection-screen on value-request for select1.
call function 'F4_DD_TABLE_FIELDS'
exporting
table = 'marc'
object = '*'
suppress_selection = 'X'
DISPLAY_ONLY =
importing
result = select1
exceptions
others = 1.
if not select1 is initial.
select single ddtext from
dd03t into a where
fieldname = select1
and ddlanguage in ('E','F').hi,
Execute this program this one will work correctly wat u want....
type-pools: slis.
TABLES: DFIES,X030L,DD03T.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT TYPE SLIS_LAYOUT_ALV.
types: begin of ty_dd03,
fieldname type FIELDNAME,
desc_1 type AS4TEXT,
desc_2 type AS4TEXT,
end of ty_dd03.
data: it_dd03 type standard table of ty_dd03,
wa_dd03 type ty_dd03.
DATA: BEGIN OF INTTAB OCCURS 100.
INCLUDE STRUCTURE DFIES.
DATA: END OF INTTAB.
DATA: BEGIN OF INTTAB_1 OCCURS 100.
INCLUDE STRUCTURE DFIES.
DATA: END OF INTTAB_1.
DATA:WA_INTTAB_1 TYPE DFIES.
PARAMETERS: TABLENM TYPE DD03T-TABNAME ."DDOBJNAME OBLIGATORY . "DEFAULT, "'MSEG',
parameter: p_lang TYPE TSTCT-SPRSL OBLIGATORY."DD03T-DDLANGUAGE OBLIGATORY. "DEFAULT. "'MENGE'.
call function 'DDIF_FIELDINFO_GET'
exporting
tabname = TABLENM
FIELDNAME = FIELDNM
LANGU = p_lang
LFIELDNAME = ' '
ALL_TYPES = ' '
IMPORTING
X030L_WA = WATAB
DDOBJTYPE =
DFIES_WA =
LINES_DESCR =
TABLES
DFIES_TAB = INTTAB
FIXED_VALUES =
EXCEPTIONS
NOT_FOUND = 1
INTERNAL_ERROR = 2
OTHERS = 3.
p_lang = 'EN'.
call function 'DDIF_FIELDINFO_GET'
exporting
tabname = TABLENM
FIELDNAME = FIELDNM
LANGU = p_lang
LFIELDNAME = ' '
ALL_TYPES = ' '
IMPORTING
X030L_WA = WATAB
DDOBJTYPE =
DFIES_WA =
LINES_DESCR =
TABLES
DFIES_TAB = INTTAB_1
FIXED_VALUES =
EXCEPTIONS
NOT_FOUND = 1
INTERNAL_ERROR = 2
OTHERS = 3.
X_FIELDCAT-FIELDNAME = 'FIELDNAME'.
X_FIELDCAT-TABNAME = 'IT_DD03'.
X_FIELDCAT-OUTPUTLEN = 10.
X_FIELDCAT-SELTEXT_L = 'FIELDNAME'.
X_FIELDCAT-NO_ZERO = 'X'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'DESC_2'.
X_FIELDCAT-TABNAME = 'IT_DD03'.
X_FIELDCAT-SELTEXT_L = 'FIELD DESCRIPTION'.
X_FIELDCAT-NO_ZERO = 'X'.
X_FIELDCAT-OUTPUTLEN = 60.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'DESC_1'.
X_FIELDCAT-TABNAME = 'IT_DD03'.
X_FIELDCAT-SELTEXT_L = 'TRANSLATED DESCRIPTION IN FOREIGN LANGUAGE'.
X_FIELDCAT-NO_ZERO = 'X'.
X_FIELDCAT-OUTPUTLEN = 60.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
LOOP AT INTTAB.
WA_DD03-FIELDNAME = INTTAB-FIELDNAME.
WA_DD03-DESC_1 = INTTAB-FIELDTEXT.
READ TABLE INTTAB_1 INTO WA_INTTAB_1 WITH KEY FIELDNAME = INTTAB-FIELDNAME.
IF SY-SUBRC EQ 0.
WA_DD03-DESC_2 = WA_INTTAB_1-FIELDTEXT.
ENDIF.
APPEND WA_DD03 TO IT_DD03.
ENDLOOP.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_DD03
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
I thought to create a text wrap you simply created a polygonal shape, selected it, and chose "Text Wrap" from the Options menu.
In a new draw document, I am creating a text frame, filling it with text, creating a polygon, and with it selected choosing "Text wrap" > "Irregular," but the text does not wrap.Hi Timothy,
Click on the text frame to select it, then go Options > Frame Links
Wrap in Draw documents will work only if the text is in a frame to which Frame linking has been applied. It's not necessary that the frame be actually linked to a second frame.
Regards,
Barry
Maybe you are looking for
-
Loss of sound to caller / Also Shared Line Appearances
1. We have had on several occurrences a situation where we (people in the office using the 941 phones) can hear the caller (or person we call outgoing), but they are unable to hear any sound from us. Rebooting the SPA400 has seemed to solve the pro
-
Actual value in Service PO differs from GR value
Hello, In the Service PO, in item details Limit tab, actual value is incorrect, service entry/ GR value is diffrent and actual value in the limit tab is diffrent, in fact it is showing the same value as overall limt and expected value, please suggest
-
Why ipod displays do not disconnect and wont sync but can be restored?
why ipod displays do not disconnect and wont sync but can be restored?
-
N95 8Gb don´t boot. Format mass memory.
Hello, My cellphone does not start after having copied some fonts in the mass memory (e:\resources\fonts). I have tried hard reset using the 3 buttons method (*, 3 and green dial) but nothing. I suspect that formatting the mass memory is the only sol
-
In all of the examples I have seen of web services, they show a simple read of some data or something. My question is - how do you use web services if you are updating various tables in a single transaction and need the abillity to roll back changes