Should I Update By Bios To The Newest?

Should i update from 1.52 to 1.9 i think it is now?
Any reason not too?

If your system is stable and everything works then i can't see the point of updating bios, this will only fix known issues that if you don't have any off these issues then why risk a bad flash - dead mobo. But if you will gain from bios flashing then go for it, I would recommend going to 1.9 as this is alot more stable than any earlier bios.
My 2 pence worth,
Babyface uk

Similar Messages

  • HT4623 so I am updating my phone to the newest IOS and it has been doing it for hours.  I have now plugged it into the computer and it says that it is in recover mode and I should restore it?  What does that mean?  Do I lose everything on my phone?

    I am updating my phone to the newest IOS and it has been doing it for hours.  I have now plugged it into the computer and it says that it is in recover mode and I should restore it?  What does that mean?  Do I lose everything on my phone?  Is there anything else I can do?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • I want to update my computer to the newest software version

    I want to update my computer to the newest software version I have 10.6.8 but I am not sure if all of my files will delete. What will happen if I update?

    With any update/upgrade you should always do a back up first.
    If you have files that have been done on a Clssic Mac platform, they need Rosetta to run, this only runs on SL.
    So consider that, also some older versions of iWork...have some issues as well.
    But your machine should be able to run Mavs.
    Here are the system Specs:
    http://support.apple.com/kb/HT5842

  • HT4623 I updated my iphone to the newest update but now it doesn't want to read my SIM card. Help!

    I updated my iphone to the newest update but now it doesn't want to activate. It says the sim card I have it's not valid and that I need to insert the som card that came with my phone. Problem is my phone was given to me by a friend of mom's and he just gave me the phone I had to buy a new sim card. It has been working all right until now. Should I go buy a new sim card? Help!

    Your phone is locked to a carrier.  Only a SIM from that carrier can be used to activate the phone.  Ask the "friend of your mom's" to which carrier the phone is locked.  You'll then need to contact that carrier and see if you are eligible to have the phone unlocked.  If not, the phone is useless to you.

  • After I update my ipad to the newest verison, I cannot purchase any games from apple store, what can I do?

    After I update my Ipad to the newest version iOS 6.0, I cannot buy any apps or games throught apple store.
    I remembered when I install the new version the device asked me if I want to use iCloud and I clicked "No",
    is it the reason I cannot download anything from apple store.
    Error message : Please contact itune for support.
    Could you please tell me what should I do now?  I want to buy the game very much!!

    Try a reset:
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)

  • I've just updated my Itunes to the newest update (iso7 I think) and now my itunes won't even open. It just jumps 2-3 times on my dock then doesn't open. I have no idea what to do , please help!

    I've just updated my Itunes to the newest update (iso7 I think) and now my itunes won't even open. It just jumps 2-3 times on my dock then doesn't open. I have no idea what to do , please help!

    Open Finder. Go to the "Go" menu in the menu bar. Press and hold Control and click on Library. Go to "Preferences". Find a file named, "com.apple.iTunes.plist" and delete that file. This won't delete your iTunes content. It will reset iTunes. Try it again.

  • When I tried to update my iPhone to the newest iOS, it wiped my phone clean! And now it won't activate it. Help!

    When I tried to update my iPhone to the newest iOS, it wiped my phone clean! And now it won't activate it. Help!

    There is an alternate method in this thread that you can try if you are unable to locate and disable all of your AV/AS software:
    https://discussions.apple.com/message/16407629#16407629

  • Should I update my iphone3 to the new iOS6 software?

    Should I update my iphone3 to the new iOS6 software?

    iOS 4.2.1 is as far as the iPhone 3G will go.
    gnug wrote:
    well my iphone3 thinks it upgraded to ios6 ...
    Unauthorized modification of iOS
    http://support.apple.com/kb/HT3743
      If this is the case...You will need to look elsewhere
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.

  • I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring?

    I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring? It brings me to a website saying the steps to possibly fix it but I don't find them helpful

    http://support.apple.com/kb/TS1275

  • Should i update my bios ?

    hello,
    i have a ms-7798
    i'm using the internal sound card that it has
    but sometimes there is a small crackle sound
    and then sometimes my pc freeze for 4-20 seconds or so(first screen freezes, after a second or so the sound)
    so what do you guys think ?
    should i flash my bios or not ?
    if so how would i go about ?

    Quote from: xmad on 18-October-13, 12:12:45
    Do you have another PSU to test?
    These issues don't particular sound like a bios issue. PSU or short right off the top, but updating may be a good first step after checking the ram.
    Run memtest which is included with the forum flash tool:
    >>Use the MSI HQ Forum USB flasher<<
    I have also attached the latest bio, don't decompress the archive, just point the forum tool at it using mode 1 then at your usb flash drive.
    saldy i dont have another PSU to test
    i already did memtest before
    sadly one of my two rams was damaged or what
    so first i scanned both
    then i took one out > got 4 errors or so
    thn i took that one out and put the another in(in the middle it froze or something), so i did it again with no error
    currently running on 4gb
    i dont think a screen will freeze up though and then continue if it is the psu
    in 1.5 > Update onboard Realtek PXE ROM.
    in 1.5 and 1.6 > Improved PCI-E display card compatibility.

  • MS6309 V2 - Should I update my BIOS?

    I am running Windows XP Pro SP 2 on a PIII 667MHZ system, 128MB of RAM, 20G Hard Drive. 
    The computer was used at my Father In Law's Doctors office and was given to me after being wiped clean.  I had a hell of a time installing XP Pro, It would get part way through the install and it would lock up.  Almost acted as if the CD ROM drive had trouble reading the CD.  Finally got XP Pro installed after numerous attempts.  During the installation I used the option to delete the old partition and created a new partition, using NTFS (non-quick) format.
    My system seems to run O.K. but a little slow and will lock up every now and then when surfing the web.  I suspect I need more RAM.  I just ordered (3) 512MB PC133MHz Corsair Memory cards from New Egg which should help.
    Motherboard has this printed on it:
    CE VER:2
    MS 6309
    So should I assume it is a MS-6309 V2.x or a MS-6309 Lite?
    Widows XP shows that I have a SMBIOS Ver 2.3
    On boot up the upper left hand corner reads A6309MS Ver 3.2, so I assume I have the Ver 3.2 Bios.  Should I bother with a BIOS upgrade?  I see that I could update to Ver 3.8.  Would this help my system performance?  I plan on upgrading the graphics card, adding a 16x DVD burner, and adding a larger hard drive (100G)
    So, should I upgrade the BIOS?  (The Live Update option will not work on my system for some reason)
    I wouldn't want to srew things up if it is running fine now.  Also if I do decide to update should I use the MS-6309 V2.x or a MS-6309 Lite update?  I would also guess I would have to follow the procedure for   "Flashing the BIOS for Users using NON FAT file system" - am I correct?
    Any help would be greatly appreciated!
    Thanks,
    Mike

    Well I ran memtest86+ with all (3) 512M DIMMS installed.  And it passed 4 runs!  This is after I played with my BIOS settings a little. 
    Here are the changes I made to my BIOS:
    Disabled system BIOS cacheable and all shadowing.  Enabled Cache Bus ECC.  Disabled power management.  Disabled SDRAM timing by SPD.  Set DRAM frequency to 100MHz and CAS latency to 3.  Disabled ClkGen Spread Spectrum.  Set CPU Host / PCI Clock to auto.  Changed CPU ratio selection from 5.0X to 4.0X.  Changed CPU Vcore selection from Auto to 1.70V.  I am really not to confident with messing with BIOS settings, but this is what I came up with from all the research I have done.  There are still many functions in the BIOS that baffle me, and I can’t seem to find any information that can help me.
    I am still looking into a new PSU, and I am trying to find out how to raise the memory voltage from MSI tech support (I guess there might be a jumper I can change).
    It is sort of a trade off, more RAM (1.5G) less speed (100Mhz) instead of less RAM (1.0G) and more speed (133MHz). 
    Performance wise I wonder which set up is better?  Will my system perform faster with the (3) 512M DIMMS [1.5G] @ 100MHz or with the (2) 512M DIMMS [1.0G] @ 133MHz?  Will I ever really need the 1.5G of RAM?  The main use of my computer is for internet, word processing, spread sheets, budget programs, digital picture storage, GPS / mapping programs.

  • My iPod will no longer turn on after attempting to update my iTunes to the newest version.

    Pretty self-explanatory for the most part. I was attempting to update iTunes to the newest version because I have been putting it off forever. It's not currently the newest version..however when it was updating, my iPod went into recovery mode (the screen flashed to the iTunes symbol & the USB symbol) & then after a few minutes of trying to restart it (pushing the home & the lock button) it went completely black & will not turn on whatsoever. My iTunes STILL will not recognize it & I have done everything to try to turn it on/get it to work, but nothing happens.
    Additional details that just happened: When I try to get it out of the black screen of death by holding the home & the lock button now, the Apple icon flashes for a few seconds, but won't fully turn on, which I don't understand why? Now it's back to the recvovery mode screen.
    Any suggestions? It's fully charged, I know that for sure.
    I would really appreciate the help though! I walk 20 minutes to class every day & always have it with me. It's a 4th Generation iPod Touch.
    Thank you all!

    - Have you tried Recovery Mode and then restore?
    - DFY mod and then restore?
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Should I update my 4s to the new ios7 ?

    Should I update my iPhone 4S to the new iOS 7 ?

    I would read this thread first: https://discussions.apple.com/thread/5331834?tstart=0

  • I recently updated my 4s to the newest IOS and I now cannot turn on Wi-fi. HAs anyone esle had the same problem?  Is there a fix?

    I recently updated my Iphone 4s to the newest IOS and I now cannot turn on Wi-fi. Has anyone esle had the same problem?  Is there a fix? I've tries restoring to a previous software update, but it appears the wi-fi was completely disabled and I do not have the ability to turn it on.

    Apple is aware of the issue and is expected to release 7.0.3 next week to address iMessage issues.
    In the meantime I have found that a good old fashion reset cures it for a while.

  • Updating iphone 4 to the newest Fw 4.2.1 stuck

    hey all,
    well yesterday i opened my new iphone 4 just arrived , i did download a direct link for ios 4.2.1 and just plug in with itune 10.1.1 latest version and i click Alt+Restore and loaded the Fw 4.2.1 and reaches to saying " restoring iphone software" about 60% and its stuck for about hour and a half . i tried other laptop on win 7 also latest itune same issue can't update to the latest and stuck in the Recovery Mode.i'v deleted so files as said in previous posts from library and deleted and everything and its not working please i need help ASAP . thx u all .

    The latest iTunes ver is 10.1.2, try updating your iTunes to the latest ver and try to restore you iphone4 to "new" instead of from a backup.

Maybe you are looking for

  • Unable to open iphoto after ver 11 upgrade

    Unable to open iphoto after ver 11 upgrade.

  • How to Send & receive HL7v2.3 & HLv2.5.1 message from same port.

    Hi, Currently I have a requirement of sending multiple version HL7 messages say HL7v2.3 & HLv2.5.1 from the same port(say 3333) and receive it at the same port (say 4444) using Oracle SOA Suite. To address this problem, I first tried to create multip

  • What the hell is thi

    I?had my Zen Sleek in my pocket at school (to listen to on the bus ride home). When?I took out and turned it on, I noticed a dark black spot on the lower right quadrant of the screen. It's always there, even when the player is off! It really is getti

  • Convert Sub-Report to Crystal Command

    I'm attempting to convert a sub-report and a shared variable from the report to a Command. Can someone help with the conversion Here is the part of the Crystal SQL I can't convert This is within last7days >>>  (ORDER_PROC.ORDER_INST>={ts '2014-06-18

  • How to modified SAP_ALL

    Hi I have development  environment and i would like to give Developer SAP_ALL without SU01( ability to create user) ability. Can anyone please let me know how could i do modify SAP_ALL and delete SU01 from it. Thanks