Should i upgrade from early 2008 macbook pro or wait until 2015?

Hi,
I'm debating on whether to bite the bullet now and buy the new macbook pro (15 inch) or wait until next year. i know this is practically obsolete in Apple years, but it actually still runs ok for my purposes (not used for work). I added RAM to 6 and am currently running Yosemite. I've read that many people keep their original macs for years. Advice helpful. Thanks!

Do you NEED new computer for any particular reason or is this just a "Want"?
If you need a new computer NOW then buy one. If not then wait.

Similar Messages

No keyboard access in bootcamp after upgrade to Early 2008 MacBook Pro

How do I regain keyboard access in Bootcamp after a hardware upgrade to a new (early 2008) 15" MacBook Pro (MBP)?
I was recently forced to upgrade from a July 2007 MBP 15" to an early 2008 MBP due to a burglary. The original MBP also had a Bootcamp partition in use for business purposes (Windows XP SP2).
Fortunately using Time Capsule and WinClone I had very recent back ups of all data and migration to the new MBP went well until I encountered an insurmountable problem at the point I wished to update the new MPB Bootcamp drivers in the restored Bootcamp partition.
The problem being encountered is as follows:
When starting up in the restored Bootcamp partition I am unable to update the with the latest Bootcamp drivers as the keyboard is inoperative. I am therefore unable to get past the CtrlAltDel security pane and navigate to load the Leopard install disk.
I do however have mouse control.
I have also tried rebooting with an external keyboard and mouse. Again the mouse worked but not the keyboard.
To add further confusion or insight into this problem I had a BartPE Windows CD utility disk set-up available for emergency use and this will boot on the new MBP. Once booted it does provide mouse and keyboard access suggesting that somehow in the WinClone restoring process the original keyboard driver was damaged.
This may well be the case as when I first started up the Bootcamp partition after the restore I encountered a Windows 'blue screen of death' that pointed to a Driver fault in a file called "bcmw15.sys".
After restarting Windows I no longer encountered the blue screen but had no keyboard access as described above.
Unforunately using the BartPE CD to bypass the keyboard problem has thwarted me as this configuration does not appear to have a means available to eject the BartPE CD itself, allowing me to then insert the Leopard install disk in its place.
Given the unique nature of the Windows system configuration I had in use any suggestions as to how I might overcome this without having to resort to rebuilding the configuration from scratch would be gratefully received.
In particular if anyone may know of the MacBook Pro Windows keyboard driver name and location this would be of particular assistance.
Dion

Booting from the Windows Install CD did not work.
I have however recovered the partition and got operational again.
The solution in the end was achieved by gaining access via Windows XP start-up in 'safe mode' using an external MS USB keyboard (the new MBP 'delete' key was not being recognised, and then using the 'Administrator' password to gain access to the Windows XP 'Device Manager'.
The full saga of difficulties encountered is too lengthy to relate in full unless someone out there really wants to know the gory details for their own specific similar need.
Suffice it to say that the most of the problems that arose were:
a) the result of the hardware changes between the old MBP and the new one requiring select old drivers to be located and removed and then new drivers installed;
b) due to an upgrade that occurred to the MS Enterprise server software in the period between when the WinClone image was taken and when the new MPB arrived and I attempted the restore (including that as a consequence of the burglary I updated my corporate mailbox password online causing the back-up XP image to be out of sync with Enterprise server once networking was revived); and
c) a Parallels software upgrade reinstall also caused issues in regaining sync with the revived Bootcamp.
Isolating the driver causing the offending ""bcmw15.sys" driver crash proved very tricky as Windows appeared to keep reinstalling some sort of generic driver that kept repeating the problem. Thereafter getting past the blocks to accessing the Apple install CD also required enormous trial and error skill to overcome.
Bottom line WinClone did perform. It restored the partition on the new machine with sufficient integrity to allow a skilled Sys Op (far beyond my Win experience) the capability to fully restore Bootcamp XP functionality.
Nevertheless the process is definitely not one I'd prefer to experience a repeat of - its taken several man days (and nights) to resolve.
Nevertheless thanks xnav for your advice.
Regards
Dion

Early 2008 Macbook Pro Should I upgrade to 6gb ram and SSD?

In the last few months, I've entered the world of 64-bit computing. I learned that this now means that my Early 2008 Macbook Pro, that has been fantastic and flawless for 6 years, needs an upgrade or replacement. I'm hard-hard stuck on whether I should upgrade it or replace it.
My current configuration is:
Processor 2.4 GHz Intel Core 2 Duo
Memory 4 GB 667 MHz DDR2 SDRAM
Storage 200 GB SATA Disk
I need to run OSX Mavericks and Windows 7 in VMWare or Bootcamp (I don't really like bootcamp).
I am eyeing two upgrades
1) Crucial 4GB Single DDR2 667MHz (PC2-5300) CL5 SODIMM 200-Pin Notebook Memory Module CT51264AC667
http://www.amazon.com/gp/product/B001RB21JY/ref=ox_sc_act_title_2?ie=UTF8&psc=1& smid=ATVPDKIKX0DER
2) Crucial M500 240GB SATA 2.5-Inch 7mm (with 9.5mm adapter) Internal Solid State Drive CT240M500SSD1
http://www.amazon.com/Crucial-2-5-Inch-adapter-Internal-CT240M500SSD1/dp/B00BQ8R M1A/ref=sr_1_10?s=pc&ie=UTF8&qid=1392961391&sr=1-10&keywords=ssd
My question is: Is it worth it for me max out my computer by upgrading again for $250? Will this hold me over for another 2-3 years, or should I look to replace?

Well, I have researched and researched and researched and come to a conclusion. I've compared many brand new replacement computers, and also reviewed my options for upgrading my computer. Upgrading to a new computer altogether, I have come across a few very attractive offers, but they're all in the $800+ price range.
I've decided that OSX Mavericks is my main issue. My early 2008 Macbook Pro was 100% perfectly sufficient for everything I needed it for when using OSX Snow Leopard. After the upgrade, VMWare Fusion runs like a sloth and everything else runs like a slug (maybe a slug that had a 5 hour energy...). Seriously. Just now, I am running Safari and MS Word while copying files to my backup drive. The beachball is all over the place, whereas the CPU is only at 15% use and RAM is at 3.97/4.00. I'm barely using the computer, and it's ridiculously hot and the fans are screaming.
First thing I'm going to do is 'upgrade' back to Snow Leopard to recover my RAM and regain the ability to effectively run my VMWare virtual machine. Then, I'm going to opt for the $100 upgrade to total 6GB of RAM and $150 upgrade to a SSD.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Mavericks, Early 2008 Macbook Pro, RAM Upgrade

Hello,
I just upgraded to Mavericks on my early 2008 Macbook Pro. I originally had Snow Leopard on it and it seemed much faster before Mavericks. I currently have 2GB of ram on this machine... would upgrading to 4 GB be that much helpful? Would my machine only recognize 3 GB? And last but not least, if it would only recognize 3 GB would it be ok to install 1 GB in the first slot and 2 GB in the second? I have heard machines perform better if they have the same about of RAM in each slot.
Or should I just revert back to snow leopard??
Thank you for you time!
Matthew

matthewthemacgeek wrote:
I thought early 2008 Macbook Pros could only recognize 3gb total for ram? Is that not true?
That's an earlier model. I have the same model (early 2008) and have 4GB recognized. MacTracker says it can handle 6GB.

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html

My early 2008 Macbook Pro is suffering from black screen after Yosemite update

My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

Hello Adam,
I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software.
How to install OS X Yosemite on your Mac
http://support.apple.com/en-us/HT6412
Regards,
-Norm G.

Will my early 2008 MacBook Pro be able to run OS X Yosemite?

Will my early 2008 MacBook Pro be able to run OS X Yosemite?

I have the same Macbook Pro as you. You should read this Apple page: http://www.apple.com/osx/how-to-upgrade/?cid=wwa-us-kwg-mac-com While you can install Yosmite, many cool features will not work on pre-2012 models, including: Handoff and Instant Hotspot, AirDrop, AirPlay Mirroring, Peer-to-Peer AirPlay and Power Nap. Additionally, if you have not already upgraded your iPhoto library from iPhoto 8.1.2 (as I have not), I believe you will need to purchase the upgrade after you install Yosemite based on what I read here: https://discussions.apple.com/thread/6602872 . Good luck! If you do or have proceeded with updating to Yosemite, please come back to this thread and share how the experience went. Thanks.

I'd like to replace my hard drive. How do I know what to buy for my 15-inch early 2008 MacBook Pro?

I am out of room on my hard drive. I'd like to get a new hard drive and restore my data to the new drive from Time Machine. How do I know what kind of hard drive to buy for my 15-inch, early 2008 MacBook Pro? Also, how hard is this to do?

I have changed HDDs several times on the old MBP. Currently it has a Hitachi 500 GB HDD that came out of my new one. My adage is that one cannot have too much storage and I think that the 1TB HDD is an excellent choice. Not only do you get generous capacity, the performance should be (theoretically) comparable to a 750 GB 7200 rpm HDD. I will be very surprised if there are compatibility problems.
If you bought the HDD from OWC, you should have received Installation instructions. If not, go to the OWC website and look at the video. I actually downloaded it so that I could hand write the instructions down step by step. Also check out iFixit website. They have step by step instructions that may prove to be useful.
Tools you need: 00 Phillips and #6 Torx Drivers (get good ones). The instructions make mention of a plastic pry bar (spudger). I use a stiff piece of plastic like a credit card.
Tips to keep in mind: Get a large open table space and place a large clean towel on it. That will protect your MBP and when you drop a screw (and you will) it will not bounce far so you will not have to spend an hour looking for it.
As you take out a set of screws, keep them together (I use wide masking tape. The little screws will stick to it.)
Keep the sets in sequence. That will make reassembly much, much easier.
The most difficult steps are removing the keyboard from the MBP body and removing the ribbon cable from the mother board. In case of the former, work from the back (the display) to the front. You will initially have to pry it up and then do a lot of jiggling to remove it. Don't be too timid about it. At the end of the ribbon cable there is a rectangular connector. Use your credit card to remove it. Just pry it off.
The #6 Torx driver is used to take off the 4 mounting pins on the HDD and if I remember correctly there is another place where it is needed, specifically in the battery compartment ( I think). If the instructions don't say so, keep that in mind and inspect the screw before you select the driver.
Good luck and make sure that you don't have parts left over.
Ciao.

My Early 2008 Macbook Pro will not boot with anything greater than 3GB of Ram.

Early 2008 Macbook Pro 4,1
2.4 GHz Intel Core 2 Duo
3 GB 667 MHz DDR2 SDRAM (PC2-5300)
OS X 10.8.4
Serial: W88450LR1XR
I keep reading mixed reviews saying that 3GB is the max while others say this system supports up to 6GB. I have tried both Kingston and Crucial and PNY and I get the same results. I can have 1x2GB stick and 1x1GB stick but not 2x2 GB sticks. Both 2 GB sticks work independently but they will not work together. They are PC2-5300 667 MHz.
I would really love to have at least 4 GB of ram in this computer. Is it not possible?
Thanks in advance.
Symptoms:
If I put 2x2 GB in the computer and power it up, the little light on the front of the computer comes on but the screen stays black. No post beeps or anything to indicate a failure or that it's running (except the light that comes on when I hit the power button)

Ok - so no one is replying. I just contacted Other World Computing who says that my Laptop will support up to 6GB of ram. I just ordered the memory directly from them. I have 6GB in the mail and should arrive tomorrow. I will report that if their guarenteed ram will work.

Early 2008 MacBook Pro hard drive was killed; how to sync stuff

My early 2008 MacBook Pro hard drive was reimaged (not by me) and they lost everything on there, and have now put in a new hard drive, saying nothing was salvageable on the original HD. I have an iPhone, iPod, iPad. When i get the MBP back, how will I be able to get those devices synced so that everything I've bought/have goes back onto the HD?
The original HD was being reimaged because my work requires use of Windows, and I was using Windows via Boot Camp. Windows got a terrible rogue virus (from my clicking on a link), which shut everything down on that side. Work tech folks said they needed to reimage the Windows part of the drive, but said in the process, the reimaging took everything, Mac stuff included. That's why I'm in this situation. They are going to put in a new hard drive, but it is a blank slate.
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes. (For those who say shame on me, for not doing a backup sooner, you're right: But we have gone through 3 moves in 18 months, so it has been kinda nuts.)
I expect the MBP to get sent back to me in the next day. I have no idea how to put these pieces back together. I'm not even sure about data recovery, but am most concerned about iTunes/iPhone/iPod/iPad.
Thanks for your help!

suzannemacuser wrote:
Long story short: last time I backed up was 2 years ago, and it wasn't using Time Machine, but an external hard drive. That was also before I got my current iPhone, the iPad and made some additions to iTunes.
Two years ago??? Shame on you!!!
I found this the other day. It's old but still applies. This should be more than enough to help you get back on track. See the comments by Zevoneer
https://discussions.apple.com/message/7217190#7217190
You will have to check on each of these. Some of the links are outdated but there is more than enough to get you started. See this article about transferring purchases. The link is in the other thread as well.
http://support.apple.com/kb/HT1848?viewlocale=en_US
Backup! Backup! Backup!
Message was edited by: Demo

Slow firewire 800 speeds on early 2008 macbook pro 17"

I've got an early 2008 macbook pro 17". I'm transferring files between a WD mybook studio II (2TB) configured as raid-1 to a sata dock with a seagate 1TB drive daisy-chained over firewire 800. both 1TB drives in the WD mybook and the 1TB seagate in the sata dock are 7.2k rpm. I'm running a block-level clone FROM the mybook TO the seagate using Carbon Copy Cloner which i would think would be the fastest real-world test i could do. I'm getting pegged speeds of 40MB/s. This is on par with other regular read/write speeds i've noticed in the past. this seems way off. to remove variables i unplugged my two firewire 400 drives (as i've heard that may slow things down, even though they're not doing anything during the clone) and it SLOWED DOWN the fw800 clone to 38MB/s ! plugging the two firewire 400 drives back in during the clone brought the speeds back up to 40MB/s. i don't have a unibody 2009 mbp that had the firewire issues.
1) HDD's should read at 70-80MB/s and at least write at 59 MB/s, why am i not getting that using firewire 800 and two 7200 rpm drives ?? (i know the wd mybook is raid-1 but i'm reading from it...shouldn't effect read performance)
2) (less important) why on earth would having two firewire 400 drives plugged in and inactive make the firewire 800 transfer speeds go up/down 2MB/s
i'm willing to experiment with anyone's suggestions. huge thanks in advance.

i have a similar problem.
i have a new seagate freeagent 1tb drive w/FW800, FW400 and USB2.0 ports, and its connected via the FW800 port/cable to my macbook pro, and read/write speeds are really slow, particularly read speeds.
i'm currently working on an audio project with around 15 audio tracks running at once, and it chokes the drive ('HD overload' errors), so i've done some benchmark testing using Drive Genius and Xbench. the results show that the drive is averaging around 12mb/s read speed, and around 26mb/s write speed. grim.
i tried the drive with the FW400 connection on my missus' old imac g5, and its much faster than my mbp's FW800 connection, so i decided to try the drive back on my machine with OSX booted in Safe mode, and benchmark it again. the results are massively different; the FW800 connection is very fast (as you'd expect).
both the tests were done with all my peripherals attached (usb hub, ethernet cable, usb2 ext. drive) so i don't think the problem is with those.
what i'm wondering is if there are any known system extensions that can screw with the FW bus speeds? if not, any pointers as to where i should start troubleshooting?
many thanks!

Tried the "Apple Bake" on my early 2008 macbook pro and it worked, does that mean for certain it is my Nividia chip that is bad?

So I had my early 2008 macbook pro (A1260) not wake up after clamshell sleep. After researching the boards felt confident it was the logicboard issue. Not being able to afford a replacement I decided to try the "apple bake", as I have been employed as a maintenance tech for a corrugation company and was comfortable doing the work myself. Anyhow it worked (350 degree f - 8mins) and my mac was back to life working as normal except for the fans running at %100 all the time. The fix was short lived, only lasted about 5 weeks and wouldnt wake up from sleep again. (yes, I applied new thermal paste the first time haha) I did the bake again and again it was revived this time fans working properly (still not sure what that was about) I have since had to do it one more time and now I just dont ever close it or let it go to sleep. I found a guy online who will replace the gpu for a good price ($150), my question is, is it actually the Nividia chip thats the issue and not something else? Is there any other issue that would be reolved by doing the bake and Im just thinking its the faulty 8600 geforce chip?
Macbook Pro 4,1 - 10.6.8 - 2.6ghz Core 2 Duo - 4gb 667 Mhz DDR2 SDRAM
Other issues I had aside from not waking up from sleep
-Strange feedback noise coming from speakers in between any audio being played. (intermittent) any audio will stop the noise. (might be unrelated)
-Dark lines from bottom of screen to top. Screen reset will fix (shift+cntrl+eject)
-Pixeleation when gaming (intermittent)
Any help would be appreciated,
Thanks in advance

So I had my early 2008 macbook pro (A1260) not wake up after clamshell sleep. After researching the boards felt confident it was the logicboard issue. Not being able to afford a replacement I decided to try the "apple bake", as I have been employed as a maintenance tech for a corrugation company and was comfortable doing the work myself. Anyhow it worked (350 degree f - 8mins) and my mac was back to life working as normal except for the fans running at %100 all the time. The fix was short lived, only lasted about 5 weeks and wouldnt wake up from sleep again. (yes, I applied new thermal paste the first time haha) I did the bake again and again it was revived this time fans working properly (still not sure what that was about) I have since had to do it one more time and now I just dont ever close it or let it go to sleep. I found a guy online who will replace the gpu for a good price ($150), my question is, is it actually the Nividia chip thats the issue and not something else? Is there any other issue that would be reolved by doing the bake and Im just thinking its the faulty 8600 geforce chip?
Macbook Pro 4,1 - 10.6.8 - 2.6ghz Core 2 Duo - 4gb 667 Mhz DDR2 SDRAM
Other issues I had aside from not waking up from sleep
-Strange feedback noise coming from speakers in between any audio being played. (intermittent) any audio will stop the noise. (might be unrelated)
-Dark lines from bottom of screen to top. Screen reset will fix (shift+cntrl+eject)
-Pixeleation when gaming (intermittent)
Any help would be appreciated,
Thanks in advance

HT3224 What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

What cable can I use to transfer data from a 2008 MacBook Pro to a new MacBook Pro with thunderbolt?

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Unpredictable reboots on my early 2008 Macbook Pro with Mavericks

Hello,
My situation:
1) First problem I encountered was kernel panic on startup. I fixed it fixed by replacing new AppleSMC.kext by older one from 10.8.* version I suppose (i used KextWizard).
2) Time after time MacBook restarts and then shows white screen with a message "your computer restarted because of a problem" (or something very similar). I'm able to start system after Cmd+Option+P+R and safe mode.
3) If I don't use the way described in point 2, I receive kernel panics with reboot (screenshots made in verbose boot mode attached).
Any help will be highly appreciated.
http://s24.postimg.org/4r6v7sno5/photo_1.jpg
http://s24.postimg.org/5uqzjr8b9/photo_3.jpg
You can see contents of system console below. The first line is the last log message before unexpected reboot. After - some info about next successful boot.
09.11.13 17:17:24,354 com.apple.SecurityServer[14]: Session 100000 created
09.11.13 17:45:13,000 bootlog[0]: BOOT_TIME 1384011913 0
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
09.11.13 17:45:58,000 kernel[0]: Longterm timer threshold: 1000 ms
09.11.13 17:45:58,000 kernel[0]: Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
09.11.13 17:45:58,000 kernel[0]: vm_page_bootstrap: 758086 free pages and 28346 wired pages
09.11.13 17:45:58,000 kernel[0]: kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000]
09.11.13 17:45:58,000 kernel[0]: zone leak detection enabled
09.11.13 17:45:58,000 kernel[0]: "vm_compressor_mode" is 4
09.11.13 17:45:58,000 kernel[0]: standard timeslicing quantum is 10000 us
09.11.13 17:45:58,000 kernel[0]: standard background quantum is 2500 us
09.11.13 17:45:58,000 kernel[0]: mig_table_max_displ = 74
09.11.13 17:45:58,000 kernel[0]: SAFE BOOT DETECTED - only valid OSBundleRequired kexts will be loaded.
09.11.13 17:45:58,000 kernel[0]: "name" not a kext
09.11.13 17:45:58,000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
09.11.13 17:45:58,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
09.11.13 17:45:58,000 kernel[0]: calling mpo_policy_init for Sandbox
09.11.13 17:45:58,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
09.11.13 17:45:58,000 kernel[0]: calling mpo_policy_init for Quarantine
09.11.13 17:45:58,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
09.11.13 17:45:58,000 kernel[0]: calling mpo_policy_init for TMSafetyNet
09.11.13 17:45:58,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
09.11.13 17:45:58,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
09.11.13 17:45:58,000 kernel[0]: The Regents of the University of California. All rights reserved.
09.11.13 17:45:58,000 kernel[0]: MAC Framework successfully initialized
09.11.13 17:45:58,000 kernel[0]: using 15728 buffer headers and 9912 cluster IO buffer headers
09.11.13 17:45:58,000 kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
09.11.13 17:45:58,000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
09.11.13 17:45:58,000 kernel[0]: ACPI: sleep states S3 S4 S5
09.11.13 17:45:58,000 kernel[0]: pci (build 22:16:29 Sep 19 2013), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
09.11.13 17:45:58,000 kernel[0]: [ PCI configuration begin ]
09.11.13 17:45:58,000 kernel[0]: console relocated to 0xf80060000
09.11.13 17:45:58,000 kernel[0]: [ PCI configuration end, bridges 7, devices 17 ]
09.11.13 17:45:58,000 kernel[0]: AppleIntelCPUPowerManagement: (built 22:16:38 Sep 19 2013) initialization complete
09.11.13 17:45:58,000 kernel[0]: mcache: 2 CPU(s), 64 bytes CPU cache line size
09.11.13 17:45:58,000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
09.11.13 17:45:58,000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
09.11.13 17:45:58,000 kernel[0]: BTCOEXIST off
09.11.13 17:45:58,000 kernel[0]: wl0: Broadcom BCM4328 802.11 Wireless Controller
09.11.13 17:45:58,000 kernel[0]: 5.10.131.36
09.11.13 17:45:58,000 kernel[0]: rooting via boot-uuid from /chosen: A48BC419-641A-3D6D-9E79-1B30F915702B
09.11.13 17:45:58,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
09.11.13 17:45:58,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
09.11.13 17:45:58,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
09.11.13 17:45:58,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
09.11.13 17:45:58,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
09.11.13 17:45:58,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
09.11.13 17:45:58,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HTS542525K9SA00 Media/IOGUIDPartitionScheme/HDD@2
09.11.13 17:45:58,000 kernel[0]: BSD root: disk0s2, major 1, minor 2
09.11.13 17:45:58,000 kernel[0]: jnl: b(1, 2): replay_journal: from: 23162880 to: 2019328 (joffset 0x747000)
09.11.13 17:45:58,000 kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 002241fffe5a2404; max speed s800.
09.11.13 17:45:58,000 kernel[0]: jnl: b(1, 2): journal replay done.
09.11.13 17:45:58,000 kernel[0]: hfs: mounted HDD on device root_device
09.11.13 17:45:58,000 kernel[0]: AppleYukon2: Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA
09.11.13 17:45:58,000 kernel[0]: AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
09.11.13 17:45:58,000 kernel[0]: hfs: Removed 0 orphaned / unlinked files and 1 directories
09.11.13 17:45:19,072 com.apple.launchd[1]: *** launchd[1] has started up. ***
09.11.13 17:45:19,072 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
09.11.13 17:45:57,316 com.apple.SecurityServer[13]: Session 100000 created
09.11.13 17:45:57,996 com.apple.kextd[11]: Safe boot mode detected; invalidating system extensions caches.
09.11.13 17:45:58,046 com.apple.kextd[11]: Cache file /System/Library/Caches/com.apple.kext.caches/Directories/System/Library/Extensi ons/KextIdentifiers.plist.gz is out of date; not using.
09.11.13 17:45:59,475 hidd[45]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
09.11.13 17:45:59,476 hidd[45]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
09.11.13 17:46:00,178 fseventsd[46]: event logs in /.fseventsd out of sync with volume. destroying old logs. (312 47 508)
09.11.13 17:46:01,000 kernel[0]: VM Swap Subsystem is ON
09.11.13 17:46:01,589 fseventsd[46]: log dir: /.fseventsd getting new uuid: 0E4C2C6C-E362-4761-9030-59394DABCA00
09.11.13 17:46:01,000 kernel[0]: ucode: no updates in safe mode
09.11.13 17:46:01,662 com.apple.launchd[1]: (com.apple.ucupdate.plist[24]) Exited with code: 1
09.11.13 17:46:01,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
09.11.13 17:46:01,904 DumpPanic[49]: Saved panic report for kernel to /Library/Logs/DiagnosticReports/Kernel_2013-11-09-174601_Oleksandrs-MacBook-Pro .panic
09.11.13 17:46:02,355 revisiond[31]: sandbox cache error 3850
09.11.13 17:46:02,394 xpcd[64]: sandbox cache error 17: database schema has changed
09.11.13 17:46:03,323 opendirectoryd[20]: sandbox cache error 11: database disk image is malformed
09.11.13 17:46:05,000 kernel[0]: Waiting for DSMOS...
09.11.13 17:46:07,000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
09.11.13 17:46:07,425 configd[17]: dhcp_arp_router: en1 SSID unavailable
09.11.13 17:46:07,448 configd[17]: setting hostname to "Oleksandrs-MacBook-Pro.local"
09.11.13 17:46:07,453 configd[17]: network changed.
09.11.13 17:46:07,816 com.apple.SecurityServer[13]: Entering service
09.11.13 17:46:08,438 com.apple.usbmuxd[23]: usbmuxd-323.1 on Oct 3 2013 at 12:43:24, running 64 bit
09.11.13 17:46:09,167 mDNSResponder[37]: mDNSResponder mDNSResponder-522.1.11 (Aug 24 2013 23:49:34) starting OSXVers 13
09.11.13 17:46:09,594 digest-service[65]: label: default
09.11.13 17:46:09,594 digest-service[65]:           dbname: od:/Local/Default
09.11.13 17:46:09,594 digest-service[65]:           mkey_file: /var/db/krb5kdc/m-key
09.11.13 17:46:09,594 digest-service[65]:           acl_file: /var/db/krb5kdc/kadmind.acl
09.11.13 17:46:10,600 apsd[59]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
09.11.13 17:46:11,064 UserEventAgent[10]: Captive: CNPluginHandler en1: Inactive
09.11.13 17:46:11,229 UserEventAgent[10]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
09.11.13 17:46:11,381 airportd[61]: airportdProcessDLILEvent: en1 attached (up)
09.11.13 17:46:11,726 digest-service[65]: digest-request: uid=0
09.11.13 17:46:13,267 com.apple.kextd[11]: Cache file /System/Library/Caches/com.apple.kext.caches/Startup/IOKitPersonalities_x86_64. ioplist.gz is out of date; not using.
09.11.13 17:46:13,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
09.11.13 17:46:13,771 systemkeychain[79]: done file: /var/run/systemkeychaincheck.done
09.11.13 17:46:13,786 configd[17]: network changed.
09.11.13 17:46:13,787 configd[17]: network changed: DNS*
09.11.13 17:46:13,979 digest-service[65]: digest-request: netr probe 0
09.11.13 17:46:13,980 digest-service[65]: digest-request: init request
09.11.13 17:46:14,012 mDNSResponder[37]: D2D_IPC: Loaded
09.11.13 17:46:14,012 mDNSResponder[37]: D2DInitialize succeeded
09.11.13 17:46:14,016 mDNSResponder[37]:   4: Listening for incoming Unix Domain Socket client requests
09.11.13 17:46:14,199 digest-service[65]: digest-request: init return domain: BUILTIN server: OLEKSANDRS-MACBOOK-PRO indomain was: <NULL>
09.11.13 17:46:15,053 networkd[93]: networkd.93 built Aug 24 2013 22:08:46

iTMM wrote:
My iSight camera ... does not work on any Apple OSX software on my early 2008 MacBook PRO 17" - Mavericks 10.9.2...
Having "performed all of the iSight Troubleshooting", you have already reinstalled OS X, Firefox, and Chrome, updated all of them to the latest versions, uninstalled all third-party mirroring software, and tested in more than one OS X login user account.
If you now restart your Mac and launch only Photo Booth, does not the PB window now display the image your camera is viewing?
If the answer is no, even for the simple Photo Booth app, we are left wondering how scratch.mit.edu (a Flash-based web site) can find a working camera when using the Chrome browser.
If the answer is still no, my first suggestion would be to click the "Check Now" button in your  > System Preferences... > Flash > Advanced menu command. If there is a later update, apply it, and test your camera again using Apple's iSight troubleshooting suggestions.
If you were already using the current Flash version, or if updating it does not change any troubleshooting results, I would try reinstalling OS X one more time in case you had a bad download or install on your previous try. Then test again with Apple's troubleshooting suggestions.
Message was edited by: EZ Jim
Mac OSX 10.9

Should i upgrade from early 2008 macbook pro or wait until 2015?

Similar Messages

Maybe you are looking for